| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Fix random crash seen while removing driver
This fixes the random kernel crash seen while removing the driver, when
running the load/unload test over multiple iterations.
1) modprobe btnxpuart
2) hciconfig hci0 reset
3) hciconfig (check hci0 interface up with valid BD address)
4) modprobe -r btnxpuart
Repeat steps 1 to 4
The ps_wakeup() call in btnxpuart_close() schedules the psdata->work(),
which gets scheduled after module is removed, causing a kernel crash.
This hidden issue got highlighted after enabling Power Save by default
in 4183a7be7700 (Bluetooth: btnxpuart: Enable Power Save feature on
startup)
The new ps_cleanup() deasserts UART break immediately while closing
serdev device, cancels any scheduled ps_work and destroys the ps_lock
mutex.
[ 85.884604] Unable to handle kernel paging request at virtual address ffffd4a61638f258
[ 85.884624] Mem abort info:
[ 85.884625] ESR = 0x0000000086000007
[ 85.884628] EC = 0x21: IABT (current EL), IL = 32 bits
[ 85.884633] SET = 0, FnV = 0
[ 85.884636] EA = 0, S1PTW = 0
[ 85.884638] FSC = 0x07: level 3 translation fault
[ 85.884642] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041dd0000
[ 85.884646] [ffffd4a61638f258] pgd=1000000095fff003, p4d=1000000095fff003, pud=100000004823d003, pmd=100000004823e003, pte=0000000000000000
[ 85.884662] Internal error: Oops: 0000000086000007 [#1] PREEMPT SMP
[ 85.890932] Modules linked in: algif_hash algif_skcipher af_alg overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_spdif snd_soc_fsl_micfil snd_soc_fsl_sai snd_soc_fsl_utils gpio_ir_recv rc_core fuse [last unloaded: btnxpuart(O)]
[ 85.927297] CPU: 1 PID: 67 Comm: kworker/1:3 Tainted: G O 6.1.36+g937b1be4345a #1
[ 85.936176] Hardware name: FSL i.MX8MM EVK board (DT)
[ 85.936182] Workqueue: events 0xffffd4a61638f380
[ 85.936198] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 85.952817] pc : 0xffffd4a61638f258
[ 85.952823] lr : 0xffffd4a61638f258
[ 85.952827] sp : ffff8000084fbd70
[ 85.952829] x29: ffff8000084fbd70 x28: 0000000000000000 x27: 0000000000000000
[ 85.963112] x26: ffffd4a69133f000 x25: ffff4bf1c8540990 x24: ffff4bf215b87305
[ 85.963119] x23: ffff4bf215b87300 x22: ffff4bf1c85409d0 x21: ffff4bf1c8540970
[ 85.977382] x20: 0000000000000000 x19: ffff4bf1c8540880 x18: 0000000000000000
[ 85.977391] x17: 0000000000000000 x16: 0000000000000133 x15: 0000ffffe2217090
[ 85.977399] x14: 0000000000000001 x13: 0000000000000133 x12: 0000000000000139
[ 85.977407] x11: 0000000000000001 x10: 0000000000000a60 x9 : ffff8000084fbc50
[ 85.977417] x8 : ffff4bf215b7d000 x7 : ffff4bf215b83b40 x6 : 00000000000003e8
[ 85.977424] x5 : 00000000410fd030 x4 : 0000000000000000 x3 : 0000000000000000
[ 85.977432] x2 : 0000000000000000 x1 : ffff4bf1c4265880 x0 : 0000000000000000
[ 85.977443] Call trace:
[ 85.977446] 0xffffd4a61638f258
[ 85.977451] 0xffffd4a61638f3e8
[ 85.977455] process_one_work+0x1d4/0x330
[ 85.977464] worker_thread+0x6c/0x430
[ 85.977471] kthread+0x108/0x10c
[ 85.977476] ret_from_fork+0x10/0x20
[ 85.977488] Code: bad PC value
[ 85.977491] ---[ end trace 0000000000000000 ]---
Preset since v6.9.11 |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: intel-vbtn: Protect ACPI notify handler against recursion
Since commit e2ffcda16290 ("ACPI: OSL: Allow Notify () handlers to run on
all CPUs") ACPI notify handlers like the intel-vbtn notify_handler() may
run on multiple CPU cores racing with themselves.
This race gets hit on Dell Venue 7140 tablets when undocking from
the keyboard, causing the handler to try and register priv->switches_dev
twice, as can be seen from the dev_info() message getting logged twice:
[ 83.861800] intel-vbtn INT33D6:00: Registering Intel Virtual Switches input-dev after receiving a switch event
[ 83.861858] input: Intel Virtual Switches as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input17
[ 83.861865] intel-vbtn INT33D6:00: Registering Intel Virtual Switches input-dev after receiving a switch event
After which things go seriously wrong:
[ 83.861872] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input17'
...
[ 83.861967] kobject: kobject_add_internal failed for input17 with -EEXIST, don't try to register things with the same name in the same directory.
[ 83.877338] BUG: kernel NULL pointer dereference, address: 0000000000000018
...
Protect intel-vbtn notify_handler() from racing with itself with a mutex
to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
net/tcp: Disable TCP-AO static key after RCU grace period
The lifetime of TCP-AO static_key is the same as the last
tcp_ao_info. On the socket destruction tcp_ao_info ceases to be
with RCU grace period, while tcp-ao static branch is currently deferred
destructed. The static key definition is
: DEFINE_STATIC_KEY_DEFERRED_FALSE(tcp_ao_needed, HZ);
which means that if RCU grace period is delayed by more than a second
and tcp_ao_needed is in the process of disablement, other CPUs may
yet see tcp_ao_info which atent dead, but soon-to-be.
And that breaks the assumption of static_key_fast_inc_not_disabled().
See the comment near the definition:
> * The caller must make sure that the static key can't get disabled while
> * in this function. It doesn't patch jump labels, only adds a user to
> * an already enabled static key.
Originally it was introduced in commit eb8c507296f6 ("jump_label:
Prevent key->enabled int overflow"), which is needed for the atomic
contexts, one of which would be the creation of a full socket from a
request socket. In that atomic context, it's known by the presence
of the key (md5/ao) that the static branch is already enabled.
So, the ref counter for that static branch is just incremented
instead of holding the proper mutex.
static_key_fast_inc_not_disabled() is just a helper for such usage
case. But it must not be used if the static branch could get disabled
in parallel as it's not protected by jump_label_mutex and as a result,
races with jump_label_update() implementation details.
Happened on netdev test-bot[1], so not a theoretical issue:
[] jump_label: Fatal kernel bug, unexpected op at tcp_inbound_hash+0x1a7/0x870 [ffffffffa8c4e9b7] (eb 50 0f 1f 44 != 66 90 0f 1f 00)) size:2 type:1
[] ------------[ cut here ]------------
[] kernel BUG at arch/x86/kernel/jump_label.c:73!
[] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
[] CPU: 3 PID: 243 Comm: kworker/3:3 Not tainted 6.10.0-virtme #1
[] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[] Workqueue: events jump_label_update_timeout
[] RIP: 0010:__jump_label_patch+0x2f6/0x350
...
[] Call Trace:
[] <TASK>
[] arch_jump_label_transform_queue+0x6c/0x110
[] __jump_label_update+0xef/0x350
[] __static_key_slow_dec_cpuslocked.part.0+0x3c/0x60
[] jump_label_update_timeout+0x2c/0x40
[] process_one_work+0xe3b/0x1670
[] worker_thread+0x587/0xce0
[] kthread+0x28a/0x350
[] ret_from_fork+0x31/0x70
[] ret_from_fork_asm+0x1a/0x30
[] </TASK>
[] Modules linked in: veth
[] ---[ end trace 0000000000000000 ]---
[] RIP: 0010:__jump_label_patch+0x2f6/0x350
[1]: https://netdev-3.bots.linux.dev/vmksft-tcp-ao-dbg/results/696681/5-connect-deny-ipv6/stderr |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Don't process extts if PTP is disabled
The ice_ptp_extts_event() function can race with ice_ptp_release() and
result in a NULL pointer dereference which leads to a kernel panic.
Panic occurs because the ice_ptp_extts_event() function calls
ptp_clock_event() with a NULL pointer. The ice driver has already
released the PTP clock by the time the interrupt for the next external
timestamp event occurs.
To fix this, modify the ice_ptp_extts_event() function to check the
PTP state and bail early if PTP is not ready. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Fix ufshcd_clear_cmd racing issue
When ufshcd_clear_cmd is racing with the completion ISR, the completed tag
of the request's mq_hctx pointer will be set to NULL by the ISR. And
ufshcd_clear_cmd's call to ufshcd_mcq_req_to_hwq will get NULL pointer KE.
Return success when the request is completed by ISR because sq does not
need cleanup.
The racing flow is:
Thread A
ufshcd_err_handler step 1
ufshcd_try_to_abort_task
ufshcd_cmd_inflight(true) step 3
ufshcd_clear_cmd
...
ufshcd_mcq_req_to_hwq
blk_mq_unique_tag
rq->mq_hctx->queue_num step 5
Thread B
ufs_mtk_mcq_intr(cq complete ISR) step 2
scsi_done
...
__blk_mq_free_request
rq->mq_hctx = NULL; step 4
Below is KE back trace:
ufshcd_try_to_abort_task: cmd pending in the device. tag = 6
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000194
pc : [0xffffffd589679bf8] blk_mq_unique_tag+0x8/0x14
lr : [0xffffffd5862f95b4] ufshcd_mcq_sq_cleanup+0x6c/0x1cc [ufs_mediatek_mod_ise]
Workqueue: ufs_eh_wq_0 ufshcd_err_handler [ufs_mediatek_mod_ise]
Call trace:
dump_backtrace+0xf8/0x148
show_stack+0x18/0x24
dump_stack_lvl+0x60/0x7c
dump_stack+0x18/0x3c
mrdump_common_die+0x24c/0x398 [mrdump]
ipanic_die+0x20/0x34 [mrdump]
notify_die+0x80/0xd8
die+0x94/0x2b8
__do_kernel_fault+0x264/0x298
do_page_fault+0xa4/0x4b8
do_translation_fault+0x38/0x54
do_mem_abort+0x58/0x118
el1_abort+0x3c/0x5c
el1h_64_sync_handler+0x54/0x90
el1h_64_sync+0x68/0x6c
blk_mq_unique_tag+0x8/0x14
ufshcd_clear_cmd+0x34/0x118 [ufs_mediatek_mod_ise]
ufshcd_try_to_abort_task+0x2c8/0x5b4 [ufs_mediatek_mod_ise]
ufshcd_err_handler+0xa7c/0xfa8 [ufs_mediatek_mod_ise]
process_one_work+0x208/0x4fc
worker_thread+0x228/0x438
kthread+0x104/0x1d4
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Fix ufshcd_abort_one racing issue
When ufshcd_abort_one is racing with the completion ISR, the completed tag
of the request's mq_hctx pointer will be set to NULL by ISR. Return
success when request is completed by ISR because ufshcd_abort_one does not
need to do anything.
The racing flow is:
Thread A
ufshcd_err_handler step 1
...
ufshcd_abort_one
ufshcd_try_to_abort_task
ufshcd_cmd_inflight(true) step 3
ufshcd_mcq_req_to_hwq
blk_mq_unique_tag
rq->mq_hctx->queue_num step 5
Thread B
ufs_mtk_mcq_intr(cq complete ISR) step 2
scsi_done
...
__blk_mq_free_request
rq->mq_hctx = NULL; step 4
Below is KE back trace.
ufshcd_try_to_abort_task: cmd at tag 41 not pending in the device.
ufshcd_try_to_abort_task: cmd at tag=41 is cleared.
Aborting tag 41 / CDB 0x28 succeeded
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000194
pc : [0xffffffddd7a79bf8] blk_mq_unique_tag+0x8/0x14
lr : [0xffffffddd6155b84] ufshcd_mcq_req_to_hwq+0x1c/0x40 [ufs_mediatek_mod_ise]
do_mem_abort+0x58/0x118
el1_abort+0x3c/0x5c
el1h_64_sync_handler+0x54/0x90
el1h_64_sync+0x68/0x6c
blk_mq_unique_tag+0x8/0x14
ufshcd_err_handler+0xae4/0xfa8 [ufs_mediatek_mod_ise]
process_one_work+0x208/0x4fc
worker_thread+0x228/0x438
kthread+0x104/0x1d4
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/drm_file: Fix pid refcounting race
<maarten.lankhorst@linux.intel.com>, Maxime Ripard
<mripard@kernel.org>, Thomas Zimmermann <tzimmermann@suse.de>
filp->pid is supposed to be a refcounted pointer; however, before this
patch, drm_file_update_pid() only increments the refcount of a struct
pid after storing a pointer to it in filp->pid and dropping the
dev->filelist_mutex, making the following race possible:
process A process B
========= =========
begin drm_file_update_pid
mutex_lock(&dev->filelist_mutex)
rcu_replace_pointer(filp->pid, <pid B>, 1)
mutex_unlock(&dev->filelist_mutex)
begin drm_file_update_pid
mutex_lock(&dev->filelist_mutex)
rcu_replace_pointer(filp->pid, <pid A>, 1)
mutex_unlock(&dev->filelist_mutex)
get_pid(<pid A>)
synchronize_rcu()
put_pid(<pid B>) *** pid B reaches refcount 0 and is freed here ***
get_pid(<pid B>) *** UAF ***
synchronize_rcu()
put_pid(<pid A>)
As far as I know, this race can only occur with CONFIG_PREEMPT_RCU=y
because it requires RCU to detect a quiescent state in code that is not
explicitly calling into the scheduler.
This race leads to use-after-free of a "struct pid".
It is probably somewhat hard to hit because process A has to pass
through a synchronize_rcu() operation while process B is between
mutex_unlock() and get_pid().
Fix it by ensuring that by the time a pointer to the current task's pid
is stored in the file, an extra reference to the pid has been taken.
This fix also removes the condition for synchronize_rcu(); I think
that optimization is unnecessary complexity, since in that case we
would usually have bailed out on the lockless check above. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind.
Hang on to the control IDs instead of pointers since those are correctly
handled with locks. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow since hdev->le_mtu may not fall in the valid range.
Move MTU from hci_dev to hci_conn to validate MTU and stop the connection
process earlier if MTU is invalid.
Also, add a missing validation in read_buffer_size() and make it return
an error value if the validation fails.
Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a
kzalloc failure and invalid MTU value.
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci0 hci_rx_work
RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547
Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c
89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d
b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42
RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246
RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f
RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa
R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084
R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000
FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline]
l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline]
l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline]
l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809
l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506
hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline]
hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335
worker_thread+0x926/0xe70 kernel/workqueue.c:3416
kthread+0x2e3/0x380 kernel/kthread.c:388
ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_ec_uart: properly fix race condition
The cros_ec_uart_probe() function calls devm_serdev_device_open() before
it calls serdev_device_set_client_ops(). This can trigger a NULL pointer
dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
Call Trace:
<TASK>
...
? ttyport_receive_buf
A simplified version of crashing code is as follows:
static inline size_t serdev_controller_receive_buf(struct serdev_controller *ctrl,
const u8 *data,
size_t count)
{
struct serdev_device *serdev = ctrl->serdev;
if (!serdev || !serdev->ops->receive_buf) // CRASH!
return 0;
return serdev->ops->receive_buf(serdev, data, count);
}
It assumes that if SERPORT_ACTIVE is set and serdev exists, serdev->ops
will also exist. This conflicts with the existing cros_ec_uart_probe()
logic, as it first calls devm_serdev_device_open() (which sets
SERPORT_ACTIVE), and only later sets serdev->ops via
serdev_device_set_client_ops().
Commit 01f95d42b8f4 ("platform/chrome: cros_ec_uart: fix race
condition") attempted to fix a similar race condition, but while doing
so, made the window of error for this race condition to happen much
wider.
Attempt to fix the race condition again, making sure we fully setup
before calling devm_serdev_device_open(). |
| In the Linux kernel, the following vulnerability has been resolved:
tmpfs: fix race on handling dquot rbtree
A syzkaller reproducer found a race while attempting to remove dquot
information from the rb tree.
Fetching the rb_tree root node must also be protected by the
dqopt->dqio_sem, otherwise, giving the right timing, shmem_release_dquot()
will trigger a warning because it couldn't find a node in the tree, when
the real reason was the root node changing before the search starts:
Thread 1 Thread 2
- shmem_release_dquot() - shmem_{acquire,release}_dquot()
- fetch ROOT - Fetch ROOT
- acquire dqio_sem
- wait dqio_sem
- do something, triger a tree rebalance
- release dqio_sem
- acquire dqio_sem
- start searching for the node, but
from the wrong location, missing
the node, and triggering a warning. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Use separate handlers for interrupts
For PF to AF interrupt vector and VF to AF vector same
interrupt handler is registered which is causing race condition.
When two interrupts are raised to two CPUs at same time
then two cores serve same event corrupting the data. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: iaa - Fix nr_cpus < nr_iaa case
If nr_cpus < nr_iaa, the calculated cpus_per_iaa will be 0, which
causes a divide-by-0 in rebalance_wq_table().
Make sure cpus_per_iaa is 1 in that case, and also in the nr_iaa == 0
case, even though cpus_per_iaa is never used if nr_iaa == 0, for
paranoia. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: qcom: at803x: fix kernel panic with at8031_probe
On reworking and splitting the at803x driver, in splitting function of
at803x PHYs it was added a NULL dereference bug where priv is referenced
before it's actually allocated and then is tried to write to for the
is_1000basex and is_fiber variables in the case of at8031, writing on
the wrong address.
Fix this by correctly setting priv local variable only after
at803x_probe is called and actually allocates priv in the phydev struct. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp: Fix divide-by-zero regression on DP MST unplug with nouveau
Fix a regression when using nouveau and unplugging a StarTech MSTDP122DP
DisplayPort 1.2 MST hub (the same regression does not appear when using
a Cable Matters DisplayPort 1.4 MST hub). Trace:
divide error: 0000 [#1] PREEMPT SMP PTI
CPU: 7 PID: 2962 Comm: Xorg Not tainted 6.8.0-rc3+ #744
Hardware name: Razer Blade/DANA_MB, BIOS 01.01 08/31/2018
RIP: 0010:drm_dp_bw_overhead+0xb4/0x110 [drm_display_helper]
Code: c6 b8 01 00 00 00 75 61 01 c6 41 0f af f3 41 0f af f1 c1 e1 04 48 63 c7 31 d2 89 ff 48 8b 5d f8 c9 48 0f af f1 48 8d 44 06 ff <48> f7 f7 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 45 31
RSP: 0018:ffffb2c5c211fa30 EFLAGS: 00010206
RAX: ffffffffffffffff RBX: 0000000000000000 RCX: 0000000000f59b00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffb2c5c211fa48 R08: 0000000000000001 R09: 0000000000000020
R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000023b4a
R13: ffff91d37d165800 R14: ffff91d36fac6d80 R15: ffff91d34a764010
FS: 00007f4a1ca3fa80(0000) GS:ffff91d6edbc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000559491d49000 CR3: 000000011d180002 CR4: 00000000003706f0
Call Trace:
<TASK>
? show_regs+0x6d/0x80
? die+0x37/0xa0
? do_trap+0xd4/0xf0
? do_error_trap+0x71/0xb0
? drm_dp_bw_overhead+0xb4/0x110 [drm_display_helper]
? exc_divide_error+0x3a/0x70
? drm_dp_bw_overhead+0xb4/0x110 [drm_display_helper]
? asm_exc_divide_error+0x1b/0x20
? drm_dp_bw_overhead+0xb4/0x110 [drm_display_helper]
? drm_dp_calc_pbn_mode+0x2e/0x70 [drm_display_helper]
nv50_msto_atomic_check+0xda/0x120 [nouveau]
drm_atomic_helper_check_modeset+0xa87/0xdf0 [drm_kms_helper]
drm_atomic_helper_check+0x19/0xa0 [drm_kms_helper]
nv50_disp_atomic_check+0x13f/0x2f0 [nouveau]
drm_atomic_check_only+0x668/0xb20 [drm]
? drm_connector_list_iter_next+0x86/0xc0 [drm]
drm_atomic_commit+0x58/0xd0 [drm]
? __pfx___drm_printfn_info+0x10/0x10 [drm]
drm_atomic_connector_commit_dpms+0xd7/0x100 [drm]
drm_mode_obj_set_property_ioctl+0x1c5/0x450 [drm]
? __pfx_drm_connector_property_set_ioctl+0x10/0x10 [drm]
drm_connector_property_set_ioctl+0x3b/0x60 [drm]
drm_ioctl_kernel+0xb9/0x120 [drm]
drm_ioctl+0x2d0/0x550 [drm]
? __pfx_drm_connector_property_set_ioctl+0x10/0x10 [drm]
nouveau_drm_ioctl+0x61/0xc0 [nouveau]
__x64_sys_ioctl+0xa0/0xf0
do_syscall_64+0x76/0x140
? do_syscall_64+0x85/0x140
? do_syscall_64+0x85/0x140
entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x7f4a1cd1a94f
Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00
RSP: 002b:00007ffd2f1df520 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffd2f1df5b0 RCX: 00007f4a1cd1a94f
RDX: 00007ffd2f1df5b0 RSI: 00000000c01064ab RDI: 000000000000000f
RBP: 00000000c01064ab R08: 000056347932deb8 R09: 000056347a7d99c0
R10: 0000000000000000 R11: 0000000000000246 R12: 000056347938a220
R13: 000000000000000f R14: 0000563479d9f3f0 R15: 0000000000000000
</TASK>
Modules linked in: rfcomm xt_conntrack nft_chain_nat xt_MASQUERADE nf_nat nf_conntrack_netlink nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xfrm_user xfrm_algo xt_addrtype nft_compat nf_tables nfnetlink br_netfilter bridge stp llc ccm cmac algif_hash overlay algif_skcipher af_alg bnep binfmt_misc snd_sof_pci_intel_cnl snd_sof_intel_hda_common snd_soc_hdac_hda snd_sof_pci snd_sof_xtensa_dsp snd_sof_intel_hda snd_sof snd_sof_utils snd_soc_acpi_intel_match snd_soc_acpi snd_soc_core snd_compress snd_sof_intel_hda_mlink snd_hda_ext_core iwlmvm intel_rapl_msr intel_rapl_common intel_tcc_cooling x86_pkg_temp_thermal intel_powerclamp mac80211 coretemp kvm_intel snd_hda_codec_hdmi kvm snd_hda_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix KASAN issue with tasklet
KASAN testing revealed the following issue assocated with freeing an IRQ.
[50006.466686] Call Trace:
[50006.466691] <IRQ>
[50006.489538] dump_stack+0x5c/0x80
[50006.493475] print_address_description.constprop.6+0x1a/0x150
[50006.499872] ? irdma_sc_process_ceq+0x483/0x790 [irdma]
[50006.505742] ? irdma_sc_process_ceq+0x483/0x790 [irdma]
[50006.511644] kasan_report.cold.11+0x7f/0x118
[50006.516572] ? irdma_sc_process_ceq+0x483/0x790 [irdma]
[50006.522473] irdma_sc_process_ceq+0x483/0x790 [irdma]
[50006.528232] irdma_process_ceq+0xb2/0x400 [irdma]
[50006.533601] ? irdma_hw_flush_wqes_callback+0x370/0x370 [irdma]
[50006.540298] irdma_ceq_dpc+0x44/0x100 [irdma]
[50006.545306] tasklet_action_common.isra.14+0x148/0x2c0
[50006.551096] __do_softirq+0x1d0/0xaf8
[50006.555396] irq_exit_rcu+0x219/0x260
[50006.559670] irq_exit+0xa/0x20
[50006.563320] smp_apic_timer_interrupt+0x1bf/0x690
[50006.568645] apic_timer_interrupt+0xf/0x20
[50006.573341] </IRQ>
The issue is that a tasklet could be pending on another core racing
the delete of the irq.
Fix by insuring any scheduled tasklet is killed after deleting the
irq. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: switchdev: Skip MDB replays of deferred events on offload
Before this change, generation of the list of MDB events to replay
would race against the creation of new group memberships, either from
the IGMP/MLD snooping logic or from user configuration.
While new memberships are immediately visible to walkers of
br->mdb_list, the notification of their existence to switchdev event
subscribers is deferred until a later point in time. So if a replay
list was generated during a time that overlapped with such a window,
it would also contain a replay of the not-yet-delivered event.
The driver would thus receive two copies of what the bridge internally
considered to be one single event. On destruction of the bridge, only
a single membership deletion event was therefore sent. As a
consequence of this, drivers which reference count memberships (at
least DSA), would be left with orphan groups in their hardware
database when the bridge was destroyed.
This is only an issue when replaying additions. While deletion events
may still be pending on the deferred queue, they will already have
been removed from br->mdb_list, so no duplicates can be generated in
that scenario.
To a user this meant that old group memberships, from a bridge in
which a port was previously attached, could be reanimated (in
hardware) when the port joined a new bridge, without the new bridge's
knowledge.
For example, on an mv88e6xxx system, create a snooping bridge and
immediately add a port to it:
root@infix-06-0b-00:~$ ip link add dev br0 up type bridge mcast_snooping 1 && \
> ip link set dev x3 up master br0
And then destroy the bridge:
root@infix-06-0b-00:~$ ip link del dev br0
root@infix-06-0b-00:~$ mvls atu
ADDRESS FID STATE Q F 0 1 2 3 4 5 6 7 8 9 a
DEV:0 Marvell 88E6393X
33:33:00:00:00:6a 1 static - - 0 . . . . . . . . . .
33:33:ff:87:e4:3f 1 static - - 0 . . . . . . . . . .
ff:ff:ff:ff:ff:ff 1 static - - 0 1 2 3 4 5 6 7 8 9 a
root@infix-06-0b-00:~$
The two IPv6 groups remain in the hardware database because the
port (x3) is notified of the host's membership twice: once via the
original event and once via a replay. Since only a single delete
notification is sent, the count remains at 1 when the bridge is
destroyed.
Then add the same port (or another port belonging to the same hardware
domain) to a new bridge, this time with snooping disabled:
root@infix-06-0b-00:~$ ip link add dev br1 up type bridge mcast_snooping 0 && \
> ip link set dev x3 up master br1
All multicast, including the two IPv6 groups from br0, should now be
flooded, according to the policy of br1. But instead the old
memberships are still active in the hardware database, causing the
switch to only forward traffic to those groups towards the CPU (port
0).
Eliminate the race in two steps:
1. Grab the write-side lock of the MDB while generating the replay
list.
This prevents new memberships from showing up while we are generating
the replay list. But it leaves the scenario in which a deferred event
was already generated, but not delivered, before we grabbed the
lock. Therefore:
2. Make sure that no deferred version of a replay event is already
enqueued to the switchdev deferred queue, before adding it to the
replay list, when replaying additions. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: perf: ctr_get_width function for legacy is not defined
With parameters CONFIG_RISCV_PMU_LEGACY=y and CONFIG_RISCV_PMU_SBI=n
linux kernel crashes when you try perf record:
$ perf record ls
[ 46.749286] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 46.750199] Oops [#1]
[ 46.750342] Modules linked in:
[ 46.750608] CPU: 0 PID: 107 Comm: perf-exec Not tainted 6.6.0 #2
[ 46.750906] Hardware name: riscv-virtio,qemu (DT)
[ 46.751184] epc : 0x0
[ 46.751430] ra : arch_perf_update_userpage+0x54/0x13e
[ 46.751680] epc : 0000000000000000 ra : ffffffff8072ee52 sp : ff2000000022b8f0
[ 46.751958] gp : ffffffff81505988 tp : ff6000000290d400 t0 : ff2000000022b9c0
[ 46.752229] t1 : 0000000000000001 t2 : 0000000000000003 s0 : ff2000000022b930
[ 46.752451] s1 : ff600000028fb000 a0 : 0000000000000000 a1 : ff600000028fb000
[ 46.752673] a2 : 0000000ae2751268 a3 : 00000000004fb708 a4 : 0000000000000004
[ 46.752895] a5 : 0000000000000000 a6 : 000000000017ffe3 a7 : 00000000000000d2
[ 46.753117] s2 : ff600000028fb000 s3 : 0000000ae2751268 s4 : 0000000000000000
[ 46.753338] s5 : ffffffff8153e290 s6 : ff600000863b9000 s7 : ff60000002961078
[ 46.753562] s8 : ff60000002961048 s9 : ff60000002961058 s10: 0000000000000001
[ 46.753783] s11: 0000000000000018 t3 : ffffffffffffffff t4 : ffffffffffffffff
[ 46.754005] t5 : ff6000000292270c t6 : ff2000000022bb30
[ 46.754179] status: 0000000200000100 badaddr: 0000000000000000 cause: 000000000000000c
[ 46.754653] Code: Unable to access instruction at 0xffffffffffffffec.
[ 46.754939] ---[ end trace 0000000000000000 ]---
[ 46.755131] note: perf-exec[107] exited with irqs disabled
[ 46.755546] note: perf-exec[107] exited with preempt_count 4
This happens because in the legacy case the ctr_get_width function was not
defined, but it is used in arch_perf_update_userpage.
Also remove extra check in riscv_pmu_ctr_get_width_mask |
| In the Linux kernel, the following vulnerability has been resolved:
mm/swap: fix race when skipping swapcache
When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads
swapin the same entry at the same time, they get different pages (A, B).
Before one thread (T0) finishes the swapin and installs page (A) to the
PTE, another thread (T1) could finish swapin of page (B), swap_free the
entry, then swap out the possibly modified page reusing the same entry.
It breaks the pte_same check in (T0) because PTE value is unchanged,
causing ABA problem. Thread (T0) will install a stalled page (A) into the
PTE and cause data corruption.
One possible callstack is like this:
CPU0 CPU1
---- ----
do_swap_page() do_swap_page() with same entry
<direct swapin path> <direct swapin path>
<alloc page A> <alloc page B>
swap_read_folio() <- read to page A swap_read_folio() <- read to page B
<slow on later locks or interrupt> <finished swapin first>
... set_pte_at()
swap_free() <- entry is free
<write to page B, now page A stalled>
<swap out page B to same swap entry>
pte_same() <- Check pass, PTE seems
unchanged, but page A
is stalled!
swap_free() <- page B content lost!
set_pte_at() <- staled page A installed!
And besides, for ZRAM, swap_free() allows the swap device to discard the
entry content, so even if page (B) is not modified, if swap_read_folio()
on CPU0 happens later than swap_free() on CPU1, it may also cause data
loss.
To fix this, reuse swapcache_prepare which will pin the swap entry using
the cache flag, and allow only one thread to swap it in, also prevent any
parallel code from putting the entry in the cache. Release the pin after
PT unlocked.
Racers just loop and wait since it's a rare and very short event. A
schedule_timeout_uninterruptible(1) call is added to avoid repeated page
faults wasting too much CPU, causing livelock or adding too much noise to
perf statistics. A similar livelock issue was described in commit
029c4628b2eb ("mm: swap: get rid of livelock in swapin readahead")
Reproducer:
This race issue can be triggered easily using a well constructed
reproducer and patched brd (with a delay in read path) [1]:
With latest 6.8 mainline, race caused data loss can be observed easily:
$ gcc -g -lpthread test-thread-swap-race.c && ./a.out
Polulating 32MB of memory region...
Keep swapping out...
Starting round 0...
Spawning 65536 workers...
32746 workers spawned, wait for done...
Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss!
Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss!
Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss!
Round 0 Failed, 15 data loss!
This reproducer spawns multiple threads sharing the same memory region
using a small swap device. Every two threads updates mapped pages one by
one in opposite direction trying to create a race, with one dedicated
thread keep swapping out the data out using madvise.
The reproducer created a reproduce rate of about once every 5 minutes, so
the race should be totally possible in production.
After this patch, I ran the reproducer for over a few hundred rounds and
no data loss observed.
Performance overhead is minimal, microbenchmark swapin 10G from 32G
zram:
Before: 10934698 us
After: 11157121 us
Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag)
[kasong@tencent.com: v4] |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel
The following race is possible between bpf_timer_cancel_and_free
and bpf_timer_cancel. It will lead a UAF on the timer->timer.
bpf_timer_cancel();
spin_lock();
t = timer->time;
spin_unlock();
bpf_timer_cancel_and_free();
spin_lock();
t = timer->timer;
timer->timer = NULL;
spin_unlock();
hrtimer_cancel(&t->timer);
kfree(t);
/* UAF on t */
hrtimer_cancel(&t->timer);
In bpf_timer_cancel_and_free, this patch frees the timer->timer
after a rcu grace period. This requires a rcu_head addition
to the "struct bpf_hrtimer". Another kfree(t) happens in bpf_timer_init,
this does not need a kfree_rcu because it is still under the
spin_lock and timer->timer has not been visible by others yet.
In bpf_timer_cancel, rcu_read_lock() is added because this helper
can be used in a non rcu critical section context (e.g. from
a sleepable bpf prog). Other timer->timer usages in helpers.c
have been audited, bpf_timer_cancel() is the only place where
timer->timer is used outside of the spin_lock.
Another solution considered is to mark a t->flag in bpf_timer_cancel
and clear it after hrtimer_cancel() is done. In bpf_timer_cancel_and_free,
it busy waits for the flag to be cleared before kfree(t). This patch
goes with a straight forward solution and frees timer->timer after
a rcu grace period. |
