| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Prevent recursive memory reclaim
Function new_inode() returns a new inode with inode->i_mapping->gfp_mask
set to GFP_HIGHUSER_MOVABLE. This value includes the __GFP_FS flag, so
allocations in that address space can recurse into filesystem memory
reclaim. We don't want that to happen because it can consume a
significant amount of stack memory.
Worse than that is that it can also deadlock: for example, in several
places, gfs2_unstuff_dinode() is called inside filesystem transactions.
This calls filemap_grab_folio(), which can allocate a new folio, which
can trigger memory reclaim. If memory reclaim recurses into the
filesystem and starts another transaction, a deadlock will ensue.
To fix these kinds of problems, prevent memory reclaim from recursing
into filesystem code by making sure that the gfp_mask of inode address
spaces doesn't include __GFP_FS.
The "meta" and resource group address spaces were already using GFP_NOFS
as their gfp_mask (which doesn't include __GFP_FS). The default value
of GFP_HIGHUSER_MOVABLE is less restrictive than GFP_NOFS, though. To
avoid being overly limiting, use the default value and only knock off
the __GFP_FS flag. I'm not sure if this will actually make a
difference, but it also shouldn't hurt.
This patch is loosely based on commit ad22c7a043c2 ("xfs: prevent stack
overflows from page cache allocation").
Fixes xfstest generic/273. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: pcl818: fix null-ptr-deref in pcl818_ai_cancel()
Syzbot identified an issue [1] in pcl818_ai_cancel(), which stems from
the fact that in case of early device detach via pcl818_detach(),
subdevice dev->read_subdev may not have initialized its pointer to
&struct comedi_async as intended. Thus, any such dereferencing of
&s->async->cmd will lead to general protection fault and kernel crash.
Mitigate this problem by removing a call to pcl818_ai_cancel() from
pcl818_detach() altogether. This way, if the subdevice setups its
support for async commands, everything async-related will be
handled via subdevice's own ->cancel() function in
comedi_device_detach_locked() even before pcl818_detach(). If no
support for asynchronous commands is provided, there is no need
to cancel anything either.
[1] Syzbot crash:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
CPU: 1 UID: 0 PID: 6050 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
RIP: 0010:pcl818_ai_cancel+0x69/0x3f0 drivers/comedi/drivers/pcl818.c:762
...
Call Trace:
<TASK>
pcl818_detach+0x66/0xd0 drivers/comedi/drivers/pcl818.c:1115
comedi_device_detach_locked+0x178/0x750 drivers/comedi/drivers.c:207
do_devconfig_ioctl drivers/comedi/comedi_fops.c:848 [inline]
comedi_unlocked_ioctl+0xcde/0x1020 drivers/comedi/comedi_fops.c:2178
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
... |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: imm: Fix use-after-free bug caused by unfinished delayed work
The delayed work item 'imm_tq' is initialized in imm_attach() and
scheduled via imm_queuecommand() for processing SCSI commands. When the
IMM parallel port SCSI host adapter is detached through imm_detach(),
the imm_struct device instance is deallocated.
However, the delayed work might still be pending or executing
when imm_detach() is called, leading to use-after-free bugs
when the work function imm_interrupt() accesses the already
freed imm_struct memory.
The race condition can occur as follows:
CPU 0(detach thread) | CPU 1
| imm_queuecommand()
| imm_queuecommand_lck()
imm_detach() | schedule_delayed_work()
kfree(dev) //FREE | imm_interrupt()
| dev = container_of(...) //USE
dev-> //USE
Add disable_delayed_work_sync() in imm_detach() to guarantee proper
cancellation of the delayed work item before imm_struct is deallocated. |
| In the Linux kernel, the following vulnerability has been resolved:
netconsole: Acquire su_mutex before navigating configs hierarchy
There is a race between operations that iterate over the userdata
cg_children list and concurrent add/remove of userdata items through
configfs. The update_userdata() function iterates over the
nt->userdata_group.cg_children list, and count_extradata_entries() also
iterates over this same list to count nodes.
Quoting from Documentation/filesystems/configfs.rst:
> A subsystem can navigate the cg_children list and the ci_parent pointer
> to see the tree created by the subsystem. This can race with configfs'
> management of the hierarchy, so configfs uses the subsystem mutex to
> protect modifications. Whenever a subsystem wants to navigate the
> hierarchy, it must do so under the protection of the subsystem
> mutex.
Without proper locking, if a userdata item is added or removed
concurrently while these functions are iterating, the list can be
accessed in an inconsistent state. For example, the list_for_each() loop
can reach a node that is being removed from the list by list_del_init()
which sets the nodes' .next pointer to point to itself, so the loop will
never end (or reach the WARN_ON_ONCE in update_userdata() ).
Fix this by holding the configfs subsystem mutex (su_mutex) during all
operations that iterate over cg_children.
This includes:
- userdatum_value_store() which calls update_userdata() to iterate over
cg_children
- All sysdata_*_enabled_store() functions which call
count_extradata_entries() to iterate over cg_children
The su_mutex must be acquired before dynamic_netconsole_mutex to avoid
potential lock ordering issues, as configfs operations may already hold
su_mutex when calling into our code. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix delayed allocation of a cell's anonymous key
The allocation of a cell's anonymous key is done in a background thread
along with other cell setup such as doing a DNS upcall. In the reported
bug, this is triggered by afs_parse_source() parsing the device name given
to mount() and calling afs_lookup_cell() with the name of the cell.
The normal key lookup then tries to use the key description on the
anonymous authentication key as the reference for request_key() - but it
may not yet be set and so an oops can happen.
This has been made more likely to happen by the fix for dynamic lookup
failure.
Fix this by firstly allocating a reference name and attaching it to the
afs_cell record when the record is created. It can share the memory
allocation with the cell name (unfortunately it can't just overlap the cell
name by prepending it with "afs@" as the cell name already has a '.'
prepended for other purposes). This reference name is then passed to
request_key().
Secondly, the anon key is now allocated on demand at the point a key is
requested in afs_request_key() if it is not already allocated. A mutex is
used to prevent multiple allocation for a cell.
Thirdly, make afs_request_key_rcu() return NULL if the anonymous key isn't
yet allocated (if we need it) and then the caller can return -ECHILD to
drop out of RCU-mode and afs_request_key() can be called.
Note that the anonymous key is kind of necessary to make the key lookup
cache work as that doesn't currently cache a negative lookup, but it's
probably worth some investigation to see if NULL can be used instead. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/memfd: fix information leak in hugetlb folios
When allocating hugetlb folios for memfd, three initialization steps are
missing:
1. Folios are not zeroed, leading to kernel memory disclosure to userspace
2. Folios are not marked uptodate before adding to page cache
3. hugetlb_fault_mutex is not taken before hugetlb_add_to_page_cache()
The memfd allocation path bypasses the normal page fault handler
(hugetlb_no_page) which would handle all of these initialization steps.
This is problematic especially for udmabuf use cases where folios are
pinned and directly accessed by userspace via DMA.
Fix by matching the initialization pattern used in hugetlb_no_page():
- Zero the folio using folio_zero_user() which is optimized for huge pages
- Mark it uptodate with folio_mark_uptodate()
- Take hugetlb_fault_mutex before adding to page cache to prevent races
The folio_zero_user() change also fixes a potential security issue where
uninitialized kernel memory could be disclosed to userspace through read()
or mmap() operations on the memfd. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check NULL before accessing
[WHAT]
IGT kms_cursor_legacy's long-nonblocking-modeset-vs-cursor-atomic
fails with NULL pointer dereference. This can be reproduced with
both an eDP panel and a DP monitors connected.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 13 UID: 0 PID: 2960 Comm: kms_cursor_lega Not tainted
6.16.0-99-custom #8 PREEMPT(voluntary)
Hardware name: AMD ........
RIP: 0010:dc_stream_get_scanoutpos+0x34/0x130 [amdgpu]
Code: 57 4d 89 c7 41 56 49 89 ce 41 55 49 89 d5 41 54 49
89 fc 53 48 83 ec 18 48 8b 87 a0 64 00 00 48 89 75 d0 48 c7 c6 e0 41 30
c2 <48> 8b 38 48 8b 9f 68 06 00 00 e8 8d d7 fd ff 31 c0 48 81 c3 e0 02
RSP: 0018:ffffd0f3c2bd7608 EFLAGS: 00010292
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffd0f3c2bd7668
RDX: ffffd0f3c2bd7664 RSI: ffffffffc23041e0 RDI: ffff8b32494b8000
RBP: ffffd0f3c2bd7648 R08: ffffd0f3c2bd766c R09: ffffd0f3c2bd7760
R10: ffffd0f3c2bd7820 R11: 0000000000000000 R12: ffff8b32494b8000
R13: ffffd0f3c2bd7664 R14: ffffd0f3c2bd7668 R15: ffffd0f3c2bd766c
FS: 000071f631b68700(0000) GS:ffff8b399f114000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000001b8105000 CR4: 0000000000f50ef0
PKRU: 55555554
Call Trace:
<TASK>
dm_crtc_get_scanoutpos+0xd7/0x180 [amdgpu]
amdgpu_display_get_crtc_scanoutpos+0x86/0x1c0 [amdgpu]
? __pfx_amdgpu_crtc_get_scanout_position+0x10/0x10[amdgpu]
amdgpu_crtc_get_scanout_position+0x27/0x50 [amdgpu]
drm_crtc_vblank_helper_get_vblank_timestamp_internal+0xf7/0x400
drm_crtc_vblank_helper_get_vblank_timestamp+0x1c/0x30
drm_crtc_get_last_vbltimestamp+0x55/0x90
drm_crtc_next_vblank_start+0x45/0xa0
drm_atomic_helper_wait_for_fences+0x81/0x1f0
...
(cherry picked from commit 621e55f1919640acab25383362b96e65f2baea3c) |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: add i_data_sem protection in ext4_destroy_inline_data_nolock()
Fix a race between inline data destruction and block mapping.
The function ext4_destroy_inline_data_nolock() changes the inode data
layout by clearing EXT4_INODE_INLINE_DATA and setting EXT4_INODE_EXTENTS.
At the same time, another thread may execute ext4_map_blocks(), which
tests EXT4_INODE_EXTENTS to decide whether to call ext4_ext_map_blocks()
or ext4_ind_map_blocks().
Without i_data_sem protection, ext4_ind_map_blocks() may receive inode
with EXT4_INODE_EXTENTS flag and triggering assert.
kernel BUG at fs/ext4/indirect.c:546!
EXT4-fs (loop2): unmounting filesystem.
invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:ext4_ind_map_blocks.cold+0x2b/0x5a fs/ext4/indirect.c:546
Call Trace:
<TASK>
ext4_map_blocks+0xb9b/0x16f0 fs/ext4/inode.c:681
_ext4_get_block+0x242/0x590 fs/ext4/inode.c:822
ext4_block_write_begin+0x48b/0x12c0 fs/ext4/inode.c:1124
ext4_write_begin+0x598/0xef0 fs/ext4/inode.c:1255
ext4_da_write_begin+0x21e/0x9c0 fs/ext4/inode.c:3000
generic_perform_write+0x259/0x5d0 mm/filemap.c:3846
ext4_buffered_write_iter+0x15b/0x470 fs/ext4/file.c:285
ext4_file_write_iter+0x8e0/0x17f0 fs/ext4/file.c:679
call_write_iter include/linux/fs.h:2271 [inline]
do_iter_readv_writev+0x212/0x3c0 fs/read_write.c:735
do_iter_write+0x186/0x710 fs/read_write.c:861
vfs_iter_write+0x70/0xa0 fs/read_write.c:902
iter_file_splice_write+0x73b/0xc90 fs/splice.c:685
do_splice_from fs/splice.c:763 [inline]
direct_splice_actor+0x10f/0x170 fs/splice.c:950
splice_direct_to_actor+0x33a/0xa10 fs/splice.c:896
do_splice_direct+0x1a9/0x280 fs/splice.c:1002
do_sendfile+0xb13/0x12c0 fs/read_write.c:1255
__do_sys_sendfile64 fs/read_write.c:1323 [inline]
__se_sys_sendfile64 fs/read_write.c:1309 [inline]
__x64_sys_sendfile64+0x1cf/0x210 fs/read_write.c:1309
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x6e/0xd8 |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: multiq3: sanitize config options in multiq3_attach()
Syzbot identified an issue [1] in multiq3_attach() that induces a
task timeout due to open() or COMEDI_DEVCONFIG ioctl operations,
specifically, in the case of multiq3 driver.
This problem arose when syzkaller managed to craft weird configuration
options used to specify the number of channels in encoder subdevice.
If a particularly great number is passed to s->n_chan in
multiq3_attach() via it->options[2], then multiple calls to
multiq3_encoder_reset() at the end of driver-specific attach() method
will be running for minutes, thus blocking tasks and affected devices
as well.
While this issue is most likely not too dangerous for real-life
devices, it still makes sense to sanitize configuration inputs. Enable
a sensible limit on the number of encoder chips (4 chips max, each
with 2 channels) to stop this behaviour from manifesting.
[1] Syzbot crash:
INFO: task syz.2.19:6067 blocked for more than 143 seconds.
...
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5254 [inline]
__schedule+0x17c4/0x4d60 kernel/sched/core.c:6862
__schedule_loop kernel/sched/core.c:6944 [inline]
schedule+0x165/0x360 kernel/sched/core.c:6959
schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:7016
__mutex_lock_common kernel/locking/mutex.c:676 [inline]
__mutex_lock+0x7e6/0x1350 kernel/locking/mutex.c:760
comedi_open+0xc0/0x590 drivers/comedi/comedi_fops.c:2868
chrdev_open+0x4cc/0x5e0 fs/char_dev.c:414
do_dentry_open+0x953/0x13f0 fs/open.c:965
vfs_open+0x3b/0x340 fs/open.c:1097
... |
| In the Linux kernel, the following vulnerability has been resolved:
vmw_balloon: indicate success when effectively deflating during migration
When migrating a balloon page, we first deflate the old page to then
inflate the new page.
However, if inflating the new page succeeded, we effectively deflated the
old page, reducing the balloon size.
In that case, the migration actually worked: similar to migrating+
immediately deflating the new page. The old page will be freed back to
the buddy.
Right now, the core will leave the page be marked as isolated (as we
returned an error). When later trying to putback that page, we will run
into the WARN_ON_ONCE() in balloon_page_putback().
That handling was changed in commit 3544c4faccb8 ("mm/balloon_compaction:
stop using __ClearPageMovable()"); before that change, we would have
tolerated that way of handling it.
To fix it, let's just return 0 in that case, making the core effectively
just clear the "isolated" flag + freeing it back to the buddy as if the
migration succeeded. Note that the new page will also get freed when the
core puts the last reference.
Note that this also makes it all be more consistent: we will no longer
unisolate the page in the balloon driver while keeping it marked as being
isolated in migration core.
This was found by code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: ufs-qcom: Fix UFS OCP issue during UFS power down (PC=3)
According to UFS specifications, the power-off sequence for a UFS device
includes:
- Sending an SSU command with Power_Condition=3 and await a response.
- Asserting RST_N low.
- Turning off REF_CLK.
- Turning off VCC.
- Turning off VCCQ/VCCQ2.
As part of ufs shutdown, after the SSU command completion, asserting
hardware reset (HWRST) triggers the device firmware to wake up and
execute its reset routine. This routine initializes hardware blocks and
takes a few milliseconds to complete. During this time, the ICCQ draws a
large current.
This large ICCQ current may cause issues for the regulator which is
supplying power to UFS, because the turn off request from UFS driver to
the regulator framework will be immediately followed by low power
mode(LPM) request by regulator framework. This is done by framework
because UFS which is the only client is requesting for disable. So if
the rail is still in the process of shutting down while ICCQ exceeds LPM
current thresholds, and LPM mode is activated in hardware during this
state, it may trigger an overcurrent protection (OCP) fault in the
regulator.
To prevent this, a 10ms delay is added after asserting HWRST. This
allows the reset operation to complete while power rails remain active
and in high-power mode.
Currently there is no way for Host to query whether the reset is
completed or not and hence this the delay is based on experiments with
Qualcomm UFS controllers across multiple UFS vendors. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL on error
Make knav_dma_open_channel consistently return NULL on error instead
of ERR_PTR. Currently the header include/linux/soc/ti/knav_dma.h
returns NULL when the driver is disabled, but the driver
implementation does not even return NULL or ERR_PTR on failure,
causing inconsistency in the users. This results in a crash in
netcp_free_navigator_resources as followed (trimmed):
Unhandled fault: alignment exception (0x221) at 0xfffffff2
[fffffff2] *pgd=80000800207003, *pmd=82ffda003, *pte=00000000
Internal error: : 221 [#1] SMP ARM
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-rc7 #1 NONE
Hardware name: Keystone
PC is at knav_dma_close_channel+0x30/0x19c
LR is at netcp_free_navigator_resources+0x2c/0x28c
[... TRIM...]
Call trace:
knav_dma_close_channel from netcp_free_navigator_resources+0x2c/0x28c
netcp_free_navigator_resources from netcp_ndo_open+0x430/0x46c
netcp_ndo_open from __dev_open+0x114/0x29c
__dev_open from __dev_change_flags+0x190/0x208
__dev_change_flags from netif_change_flags+0x1c/0x58
netif_change_flags from dev_change_flags+0x38/0xa0
dev_change_flags from ip_auto_config+0x2c4/0x11f0
ip_auto_config from do_one_initcall+0x58/0x200
do_one_initcall from kernel_init_freeable+0x1cc/0x238
kernel_init_freeable from kernel_init+0x1c/0x12c
kernel_init from ret_from_fork+0x14/0x38
[... TRIM...]
Standardize the error handling by making the function return NULL on
all error conditions. The API is used in just the netcp_core.c so the
impact is limited.
Note, this change, in effect reverts commit 5b6cb43b4d62 ("net:
ethernet: ti: netcp_core: return error while dma channel open issue"),
but provides a less error prone implementation. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Disable trampoline for kernel module function trace
The current LoongArch BPF trampoline implementation is incompatible
with tracing functions in kernel modules. This causes several severe
and user-visible problems:
* The `bpf_selftests/module_attach` test fails consistently.
* Kernel lockup when a BPF program is attached to a module function [1].
* Critical kernel modules like WireGuard experience traffic disruption
when their functions are traced with fentry [2].
Given the severity and the potential for other unknown side-effects, it
is safest to disable the feature entirely for now. This patch prevents
the BPF subsystem from allowing trampoline attachments to kernel module
functions on LoongArch.
This is a temporary mitigation until the core issues in the trampoline
code for kernel module handling can be identified and fixed.
[root@fedora bpf]# ./test_progs -a module_attach -v
bpf_testmod.ko is already unloaded.
Loading bpf_testmod.ko...
Successfully loaded bpf_testmod.ko.
test_module_attach:PASS:skel_open 0 nsec
test_module_attach:PASS:set_attach_target 0 nsec
test_module_attach:PASS:set_attach_target_explicit 0 nsec
test_module_attach:PASS:skel_load 0 nsec
libbpf: prog 'handle_fentry': failed to attach: -ENOTSUPP
libbpf: prog 'handle_fentry': failed to auto-attach: -ENOTSUPP
test_module_attach:FAIL:skel_attach skeleton attach failed: -524
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
Successfully unloaded bpf_testmod.ko.
[1]: https://lore.kernel.org/loongarch/CAK3+h2wDmpC-hP4u4pJY8T-yfKyk4yRzpu2LMO+C13FMT58oqQ@mail.gmail.com/
[2]: https://lore.kernel.org/loongarch/CAK3+h2wYcpc+OwdLDUBvg2rF9rvvyc5amfHT-KcFaK93uoELPg@mail.gmail.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix PTP cleanup on driver removal in error path
Improve the cleanup on releasing PTP resources in error path.
The error case might happen either at the driver probe and PTP
feature initialization or on PTP restart (errors in reset handling, NVM
update etc). In both cases, calls to PF PTP cleanup (ice_ptp_cleanup_pf
function) and 'ps_lock' mutex deinitialization were missed.
Additionally, ptp clock was not unregistered in the latter case.
Keep PTP state as 'uninitialized' on init to distinguish between error
scenarios and to avoid resource release duplication at driver removal.
The consequence of missing ice_ptp_cleanup_pf call is the following call
trace dumped when ice_adapter object is freed (port list is not empty,
as it is required at this stage):
[ T93022] ------------[ cut here ]------------
[ T93022] WARNING: CPU: 10 PID: 93022 at
ice/ice_adapter.c:67 ice_adapter_put+0xef/0x100 [ice]
...
[ T93022] RIP: 0010:ice_adapter_put+0xef/0x100 [ice]
...
[ T93022] Call Trace:
[ T93022] <TASK>
[ T93022] ? ice_adapter_put+0xef/0x100 [ice
33d2647ad4f6d866d41eefff1806df37c68aef0c]
[ T93022] ? __warn.cold+0xb0/0x10e
[ T93022] ? ice_adapter_put+0xef/0x100 [ice
33d2647ad4f6d866d41eefff1806df37c68aef0c]
[ T93022] ? report_bug+0xd8/0x150
[ T93022] ? handle_bug+0xe9/0x110
[ T93022] ? exc_invalid_op+0x17/0x70
[ T93022] ? asm_exc_invalid_op+0x1a/0x20
[ T93022] ? ice_adapter_put+0xef/0x100 [ice
33d2647ad4f6d866d41eefff1806df37c68aef0c]
[ T93022] pci_device_remove+0x42/0xb0
[ T93022] device_release_driver_internal+0x19f/0x200
[ T93022] driver_detach+0x48/0x90
[ T93022] bus_remove_driver+0x70/0xf0
[ T93022] pci_unregister_driver+0x42/0xb0
[ T93022] ice_module_exit+0x10/0xdb0 [ice
33d2647ad4f6d866d41eefff1806df37c68aef0c]
...
[ T93022] ---[ end trace 0000000000000000 ]---
[ T93022] ice: module unloaded |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix possible vport_config NULL pointer deref in remove
Attempting to remove the driver will cause a crash in cases where
the vport failed to initialize. Following trace is from an instance where
the driver failed during an attempt to create a VF:
[ 1661.543624] idpf 0000:84:00.7: Device HW Reset initiated
[ 1722.923726] idpf 0000:84:00.7: Transaction timed-out (op:1 cookie:2900 vc_op:1 salt:29 timeout:60000ms)
[ 1723.353263] BUG: kernel NULL pointer dereference, address: 0000000000000028
...
[ 1723.358472] RIP: 0010:idpf_remove+0x11c/0x200 [idpf]
...
[ 1723.364973] Call Trace:
[ 1723.365475] <TASK>
[ 1723.365972] pci_device_remove+0x42/0xb0
[ 1723.366481] device_release_driver_internal+0x1a9/0x210
[ 1723.366987] pci_stop_bus_device+0x6d/0x90
[ 1723.367488] pci_stop_and_remove_bus_device+0x12/0x20
[ 1723.367971] pci_iov_remove_virtfn+0xbd/0x120
[ 1723.368309] sriov_disable+0x34/0xe0
[ 1723.368643] idpf_sriov_configure+0x58/0x140 [idpf]
[ 1723.368982] sriov_numvfs_store+0xda/0x1c0
Avoid the NULL pointer dereference by adding NULL pointer check for
vport_config[i], before freeing user_config.q_coalesce. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: add seqadj extension for natted connections
Sequence adjustment may be required for FTP traffic with PASV/EPSV modes.
due to need to re-write packet payload (IP, port) on the ftp control
connection. This can require changes to the TCP length and expected
seq / ack_seq.
The easiest way to reproduce this issue is with PASV mode.
Example ruleset:
table inet ftp_nat {
ct helper ftp_helper {
type "ftp" protocol tcp
l3proto inet
}
chain prerouting {
type filter hook prerouting priority 0; policy accept;
tcp dport 21 ct state new ct helper set "ftp_helper"
}
}
table ip nat {
chain prerouting {
type nat hook prerouting priority -100; policy accept;
tcp dport 21 dnat ip prefix to ip daddr map {
192.168.100.1 : 192.168.13.2/32 }
}
chain postrouting {
type nat hook postrouting priority 100 ; policy accept;
tcp sport 21 snat ip prefix to ip saddr map {
192.168.13.2 : 192.168.100.1/32 }
}
}
Note that the ftp helper gets assigned *after* the dnat setup.
The inverse (nat after helper assign) is handled by an existing
check in nf_nat_setup_info() and will not show the problem.
Topoloy:
+-------------------+ +----------------------------------+
| FTP: 192.168.13.2 | <-> | NAT: 192.168.13.3, 192.168.100.1 |
+-------------------+ +----------------------------------+
|
+-----------------------+
| Client: 192.168.100.2 |
+-----------------------+
ftp nat changes do not work as expected in this case:
Connected to 192.168.100.1.
[..]
ftp> epsv
EPSV/EPRT on IPv4 off.
ftp> ls
227 Entering passive mode (192,168,100,1,209,129).
421 Service not available, remote server has closed connection.
Kernel logs:
Missing nfct_seqadj_ext_add() setup call
WARNING: CPU: 1 PID: 0 at net/netfilter/nf_conntrack_seqadj.c:41
[..]
__nf_nat_mangle_tcp_packet+0x100/0x160 [nf_nat]
nf_nat_ftp+0x142/0x280 [nf_nat_ftp]
help+0x4d1/0x880 [nf_conntrack_ftp]
nf_confirm+0x122/0x2e0 [nf_conntrack]
nf_hook_slow+0x3c/0xb0
..
Fix this by adding the required extension when a conntrack helper is assigned
to a connection that has a nat binding. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: arm: scmi: Fix genpd leak on provider registration failure
If of_genpd_add_provider_onecell() fails during probe, the previously
created generic power domains are not removed, leading to a memory leak
and potential kernel crash later in genpd_debug_add().
Add proper error handling to unwind the initialized domains before
returning from probe to ensure all resources are correctly released on
failure.
Example crash trace observed without this fix:
| Unable to handle kernel paging request at virtual address fffffffffffffc70
| CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.0-rc1 #405 PREEMPT
| Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform
| pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : genpd_debug_add+0x2c/0x160
| lr : genpd_debug_init+0x74/0x98
| Call trace:
| genpd_debug_add+0x2c/0x160 (P)
| genpd_debug_init+0x74/0x98
| do_one_initcall+0xd0/0x2d8
| do_initcall_level+0xa0/0x140
| do_initcalls+0x60/0xa8
| do_basic_setup+0x28/0x40
| kernel_init_freeable+0xe8/0x170
| kernel_init+0x2c/0x140
| ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix unsafe locking in the scx_dump_state()
For built with CONFIG_PREEMPT_RT=y kernels, the dump_lock will be converted
sleepable spinlock and not disable-irq, so the following scenarios occur:
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
irq_work/0/27 [HC0[0]:SC0[0]:HE1:SE1] takes:
(&rq->__lock){?...}-{2:2}, at: raw_spin_rq_lock_nested+0x2b/0x40
{IN-HARDIRQ-W} state was registered at:
lock_acquire+0x1e1/0x510
_raw_spin_lock_nested+0x42/0x80
raw_spin_rq_lock_nested+0x2b/0x40
sched_tick+0xae/0x7b0
update_process_times+0x14c/0x1b0
tick_periodic+0x62/0x1f0
tick_handle_periodic+0x48/0xf0
timer_interrupt+0x55/0x80
__handle_irq_event_percpu+0x20a/0x5c0
handle_irq_event_percpu+0x18/0xc0
handle_irq_event+0xb5/0x150
handle_level_irq+0x220/0x460
__common_interrupt+0xa2/0x1e0
common_interrupt+0xb0/0xd0
asm_common_interrupt+0x2b/0x40
_raw_spin_unlock_irqrestore+0x45/0x80
__setup_irq+0xc34/0x1a30
request_threaded_irq+0x214/0x2f0
hpet_time_init+0x3e/0x60
x86_late_time_init+0x5b/0xb0
start_kernel+0x308/0x410
x86_64_start_reservations+0x1c/0x30
x86_64_start_kernel+0x96/0xa0
common_startup_64+0x13e/0x148
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&rq->__lock);
<Interrupt>
lock(&rq->__lock);
*** DEADLOCK ***
stack backtrace:
CPU: 0 UID: 0 PID: 27 Comm: irq_work/0
Call Trace:
<TASK>
dump_stack_lvl+0x8c/0xd0
dump_stack+0x14/0x20
print_usage_bug+0x42e/0x690
mark_lock.part.44+0x867/0xa70
? __pfx_mark_lock.part.44+0x10/0x10
? string_nocheck+0x19c/0x310
? number+0x739/0x9f0
? __pfx_string_nocheck+0x10/0x10
? __pfx_check_pointer+0x10/0x10
? kvm_sched_clock_read+0x15/0x30
? sched_clock_noinstr+0xd/0x20
? local_clock_noinstr+0x1c/0xe0
__lock_acquire+0xc4b/0x62b0
? __pfx_format_decode+0x10/0x10
? __pfx_string+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
? __pfx_vsnprintf+0x10/0x10
lock_acquire+0x1e1/0x510
? raw_spin_rq_lock_nested+0x2b/0x40
? __pfx_lock_acquire+0x10/0x10
? dump_line+0x12e/0x270
? raw_spin_rq_lock_nested+0x20/0x40
_raw_spin_lock_nested+0x42/0x80
? raw_spin_rq_lock_nested+0x2b/0x40
raw_spin_rq_lock_nested+0x2b/0x40
scx_dump_state+0x3b3/0x1270
? finish_task_switch+0x27e/0x840
scx_ops_error_irq_workfn+0x67/0x80
irq_work_single+0x113/0x260
irq_work_run_list.part.3+0x44/0x70
run_irq_workd+0x6b/0x90
? __pfx_run_irq_workd+0x10/0x10
smpboot_thread_fn+0x529/0x870
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0x305/0x3f0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x40/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
This commit therefore use rq_lock_irqsave/irqrestore() to replace
rq_lock/unlock() in the scx_dump_state(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: qmi_wwan: initialize MAC header offset in qmimux_rx_fixup
Raw IP packets have no MAC header, leaving skb->mac_header uninitialized.
This can trigger kernel panics on ARM64 when xfrm or other subsystems
access the offset due to strict alignment checks.
Initialize the MAC header to prevent such crashes.
This can trigger kernel panics on ARM when running IPsec over the
qmimux0 interface.
Example trace:
Internal error: Oops: 000000009600004f [#1] SMP
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.34-gbe78e49cb433 #1
Hardware name: LS1028A RDB Board (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : xfrm_input+0xde8/0x1318
lr : xfrm_input+0x61c/0x1318
sp : ffff800080003b20
Call trace:
xfrm_input+0xde8/0x1318
xfrm6_rcv+0x38/0x44
xfrm6_esp_rcv+0x48/0xa8
ip6_protocol_deliver_rcu+0x94/0x4b0
ip6_input_finish+0x44/0x70
ip6_input+0x44/0xc0
ipv6_rcv+0x6c/0x114
__netif_receive_skb_one_core+0x5c/0x8c
__netif_receive_skb+0x18/0x60
process_backlog+0x78/0x17c
__napi_poll+0x38/0x180
net_rx_action+0x168/0x2f0 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix GEM free for imported dma-bufs
Imported dma-bufs also have obj->resv != &obj->_resv. So we should
check both this condition in addition to flags for handling the
_NO_SHARE case.
Fixes this splat that was reported with IRIS video playback:
------------[ cut here ]------------
WARNING: CPU: 3 PID: 2040 at drivers/gpu/drm/msm/msm_gem.c:1127 msm_gem_free_object+0x1f8/0x264 [msm]
CPU: 3 UID: 1000 PID: 2040 Comm: .gnome-shell-wr Not tainted 6.17.0-rc7 #1 PREEMPT
pstate: 81400005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : msm_gem_free_object+0x1f8/0x264 [msm]
lr : msm_gem_free_object+0x138/0x264 [msm]
sp : ffff800092a1bb30
x29: ffff800092a1bb80 x28: ffff800092a1bce8 x27: ffffbc702dbdbe08
x26: 0000000000000008 x25: 0000000000000009 x24: 00000000000000a6
x23: ffff00083c72f850 x22: ffff00083c72f868 x21: ffff00087e69f200
x20: ffff00087e69f330 x19: ffff00084d157ae0 x18: 0000000000000000
x17: 0000000000000000 x16: ffffbc704bd46b80 x15: 0000ffffd0959540
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: ffffbc702e6cdb48 x10: 0000000000000000 x9 : 000000000000003f
x8 : ffff800092a1ba90 x7 : 0000000000000000 x6 : 0000000000000020
x5 : ffffbc704bd46c40 x4 : fffffdffe102cf60 x3 : 0000000000400032
x2 : 0000000000020000 x1 : ffff00087e6978e8 x0 : ffff00087e6977e8
Call trace:
msm_gem_free_object+0x1f8/0x264 [msm] (P)
drm_gem_object_free+0x1c/0x30 [drm]
drm_gem_object_handle_put_unlocked+0x138/0x150 [drm]
drm_gem_object_release_handle+0x5c/0xcc [drm]
drm_gem_handle_delete+0x68/0xbc [drm]
drm_gem_close_ioctl+0x34/0x40 [drm]
drm_ioctl_kernel+0xc0/0x130 [drm]
drm_ioctl+0x360/0x4e0 [drm]
__arm64_sys_ioctl+0xac/0x104
invoke_syscall+0x48/0x104
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xec
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
Patchwork: https://patchwork.freedesktop.org/patch/676273/ |
