| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix double free in ice_sf_eth_activate() error path
When auxiliary_device_add() fails, ice_sf_eth_activate() jumps to
aux_dev_uninit and calls auxiliary_device_uninit(&sf_dev->adev).
The device release callback ice_sf_dev_release() frees sf_dev, but
the current error path falls through to sf_dev_free and calls
kfree(sf_dev) again, causing a double free.
Keep kfree(sf_dev) for the auxiliary_device_init() failure path, but
avoid falling through to sf_dev_free after auxiliary_device_uninit(). |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix uninit-value by validating catalog record size
Syzbot reported a KMSAN uninit-value issue in hfsplus_strcasecmp(). The
root cause is that hfs_brec_read() doesn't validate that the on-disk
record size matches the expected size for the record type being read.
When mounting a corrupted filesystem, hfs_brec_read() may read less data
than expected. For example, when reading a catalog thread record, the
debug output showed:
HFSPLUS_BREC_READ: rec_len=520, fd->entrylength=26
HFSPLUS_BREC_READ: WARNING - entrylength (26) < rec_len (520) - PARTIAL READ!
hfs_brec_read() only validates that entrylength is not greater than the
buffer size, but doesn't check if it's less than expected. It successfully
reads 26 bytes into a 520-byte structure and returns success, leaving 494
bytes uninitialized.
This uninitialized data in tmp.thread.nodeName then gets copied by
hfsplus_cat_build_key_uni() and used by hfsplus_strcasecmp(), triggering
the KMSAN warning when the uninitialized bytes are used as array indices
in case_fold().
Fix by introducing hfsplus_brec_read_cat() wrapper that:
1. Calls hfs_brec_read() to read the data
2. Validates the record size based on the type field:
- Fixed size for folder and file records
- Variable size for thread records (depends on string length)
3. Returns -EIO if size doesn't match expected
For thread records, check against HFSPLUS_MIN_THREAD_SZ before reading
nodeName.length to avoid reading uninitialized data at call sites that
don't zero-initialize the entry structure.
Also initialize the tmp variable in hfsplus_find_cat() as defensive
programming to ensure no uninitialized data even if validation is
bypassed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task
Watchdog task might end between send_sig() and kthread_stop() calls, what
results in the use-after-free issue. Fix this by increasing watchdog task
reference count before calling send_sig() and dropping it by switching to
kthread_stop_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix bounds check in check_xattrs() to prevent out-of-bounds access
The bounds check for the next xattr entry in check_xattrs() uses
(void *)next >= end, which allows next to point within sizeof(u32)
bytes of end. On the next loop iteration, IS_LAST_ENTRY() reads 4
bytes via *(__u32 *)(entry), which can overrun the valid xattr region.
For example, if next lands at end - 1, the check passes since
next < end, but IS_LAST_ENTRY() reads 4 bytes starting at end - 1,
accessing 3 bytes beyond the valid region.
Fix this by changing the check to (void *)next + sizeof(u32) > end,
ensuring there is always enough space for the IS_LAST_ENTRY() read
on the subsequent iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: use sk blob accessor in socket permission helpers
SELinux socket state lives in the composite LSM socket blob.
sock_has_perm() and nlmsg_sock_has_extended_perms() currently
dereference sk->sk_security directly, which assumes the SELinux socket
blob is at offset zero.
In stacked configurations that assumption does not hold. If another LSM
allocates socket blob storage before SELinux, these helpers may read the
wrong blob and feed invalid SID and class values into AVC checks.
Use selinux_sock() instead of accessing sk->sk_security directly. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Hold eventfs_mutex and SRCU when remount walks events
Commit 340f0c7067a9 ("eventfs: Update all the eventfs_inodes from the
events descriptor") had eventfs_set_attrs() recurse through ei->children
on remount. The walk only holds the rcu_read_lock() taken by
tracefs_apply_options() over tracefs_inodes, which is wrong:
- list_for_each_entry over ei->children races with the list_del_rcu()
in eventfs_remove_rec() -- LIST_POISON1 deref, same shape as
d2603279c7d6.
- eventfs_inodes are freed via call_srcu(&eventfs_srcu, ...).
rcu_read_lock() does not extend an SRCU grace period, so ti->private
can be reclaimed under the walk.
- The writes to ei->attr race with eventfs_set_attr(), which holds
eventfs_mutex.
Reproducer:
while :; do mount -o remount,uid=$((RANDOM%1000)) /sys/kernel/tracing; done &
while :; do
echo "p:kp submit_bio" > /sys/kernel/tracing/kprobe_events
echo > /sys/kernel/tracing/kprobe_events
done
Wrap the events portion of tracefs_apply_options() in
eventfs_remount_lock()/_unlock() that take eventfs_mutex and
srcu_read_lock(&eventfs_srcu). eventfs_set_attrs() doesn't sleep so the
nested rcu_read_lock() is fine; lockdep_assert_held() pins the contract.
Comment in tracefs_drop_inode() said "RCU cycle" -- it is SRCU. |
| In the Linux kernel, the following vulnerability has been resolved:
tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()
When a tracepoint goes through the 0 -> 1 transition, tracepoint_add_func()
invokes the subsystem's ext->regfunc() before attempting to install the
new probe via func_add(). If func_add() then fails (for example, when
allocate_probes() cannot allocate a new probe array under memory pressure
and returns -ENOMEM), the function returns the error without calling the
matching ext->unregfunc(), leaving the side effects of regfunc() behind
with no installed probe to justify them.
For syscall tracepoints this is particularly unpleasant: syscall_regfunc()
bumps sys_tracepoint_refcount and sets SYSCALL_TRACEPOINT on every task.
After a leaked failure, the refcount is stuck at a non-zero value with no
consumer, and every task continues paying the syscall trace entry/exit
overhead until reboot. Other subsystems providing regfunc()/unregfunc()
pairs exhibit similarly scoped persistent state.
Mirror the existing 1 -> 0 cleanup and call ext->unregfunc() in the
func_add() error path, gated on the same condition used there so the
unwind is symmetric with the registration. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mpc52xx: fix controller deregistration
Make sure to deregister the controller before disabling and releasing
underlying resources like interrupts and gpios during driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: cadence-quadspi: fix unclocked access on unbind
Make sure that the controller is runtime resumed before disabling it
during driver unbind to avoid an unclocked register access.
This issue was flagged by Sashiko when reviewing a controller
deregistration fix. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana: Fix mana_destroy_wq_obj() cleanup in mana_ib_create_qp_rss()
Sashiko points out there are two bugs here in the error unwind flow, both
related to how the WQ table is unwound.
First there is a double i-- on the first failure path due to the while loop
having a i--, remove it.
Second if mana_ib_install_cq_cb() fails then mana_create_wq_obj() is not
undone due to the above i--. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: check for nEPT/nNPT in slow flush hypercalls
Checking is_guest_mode(vcpu) is incorrect, because translate_nested_gpa()
is only valid if an L2 guest is running *with nested EPT/NPT enabled*.
Instead use the same condition as translate_nested_gpa() itself. |
| In the Linux kernel, the following vulnerability has been resolved:
smack: /smack/doi: accept previously used values
Writing to /smack/doi a value that has ever been
written there in the past disables networking for
non-ambient labels.
E.g.
# cat /smack/doi
3
# netlabelctl -p cipso list
Configured CIPSO mappings (1)
DOI value : 3
mapping type : PASS_THROUGH
# netlabelctl -p map list
Configured NetLabel domain mappings (3)
domain: "_" (IPv4)
protocol: UNLABELED
domain: DEFAULT (IPv4)
protocol: CIPSO, DOI = 3
domain: DEFAULT (IPv6)
protocol: UNLABELED
# cat /smack/ambient
_
# cat /proc/$$/attr/smack/current
_
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.964 ms
# echo foo >/proc/$$/attr/smack/current
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.956 ms
unknown option 86
# echo 4 >/smack/doi
# echo 3 >/smack/doi
!> [ 214.050395] smk_cipso_doi:691 cipso add rc = -17
# echo 3 >/smack/doi
!> [ 249.402261] smk_cipso_doi:678 remove rc = -2
!> [ 249.402261] smk_cipso_doi:691 cipso add rc = -17
# ping -c1 10.1.95.12
!!> ping: 10.1.95.12: Address family for hostname not supported
# echo _ >/proc/$$/attr/smack/current
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.617 ms
This happens because Smack keeps decommissioned DOIs,
fails to re-add them, and consequently refuses to add
the “default” domain map:
# netlabelctl -p cipso list
Configured CIPSO mappings (2)
DOI value : 3
mapping type : PASS_THROUGH
DOI value : 4
mapping type : PASS_THROUGH
# netlabelctl -p map list
Configured NetLabel domain mappings (2)
domain: "_" (IPv4)
protocol: UNLABELED
!> (no ipv4 map for default domain here)
domain: DEFAULT (IPv6)
protocol: UNLABELED
Fix by clearing decommissioned DOI definitions and
serializing concurrent DOI updates with a new lock.
Also:
- allow /smack/doi to live unconfigured, since
adding a map (netlbl_cfg_cipsov4_map_add) may fail.
CIPSO_V4_DOI_UNKNOWN(0) indicates the unconfigured DOI
- add new DOI before removing the old default map,
so the old map remains if the add fails
(2008-02-04, Casey Schaufler) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/display/dp_mst: Add protection against 0 vcpi
When releasing a timeslot there is a slight chance we may end up
with the wrong payload mask due to overflow if the delayed_destroy_work
ends up coming into play after a DP 2.1 monitor gets disconnected
which causes vcpi to become 0 then we try to make the payload =
~BIT(vcpi - 1) which is a negative shift. VCPI id should never
really be 0 hence skip changing the payload mask if VCPI is 0.
Otherwise it leads to
<7> [515.287237] xe 0000:03:00.0: [drm:drm_dp_mst_get_port_malloc
[drm_display_helper]] port ffff888126ce9000 (3)
<4> [515.287267] -----------[ cut here ]-----------
<3> [515.287268] UBSAN: shift-out-of-bounds in
../drivers/gpu/drm/display/drm_dp_mst_topology.c:4575:36
<3> [515.287271] shift exponent -1 is negative
<4> [515.287275] CPU: 7 UID: 0 PID: 3108 Comm: kworker/u64:33 Tainted: G
S U 6.17.0-rc6-lgci-xe-xe-3795-3e79699fa1b216e92+ #1 PREEMPT(voluntary)
<4> [515.287279] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
<4> [515.287279] Hardware name: ASUS System Product Name/PRIME Z790-P
WIFI, BIOS 1645 03/15/2024
<4> [515.287281] Workqueue: drm_dp_mst_wq drm_dp_delayed_destroy_work
[drm_display_helper]
<4> [515.287303] Call Trace:
<4> [515.287304] <TASK>
<4> [515.287306] dump_stack_lvl+0xc1/0xf0
<4> [515.287313] dump_stack+0x10/0x20
<4> [515.287316] __ubsan_handle_shift_out_of_bounds+0x133/0x2e0
<4> [515.287324] ? drm_atomic_get_private_obj_state+0x186/0x1d0
<4> [515.287333] drm_dp_atomic_release_time_slots.cold+0x17/0x3d
[drm_display_helper]
<4> [515.287355] mst_connector_atomic_check+0x159/0x180 [xe]
<4> [515.287546] drm_atomic_helper_check_modeset+0x4d9/0xfa0
<4> [515.287550] ? __ww_mutex_lock.constprop.0+0x6f/0x1a60
<4> [515.287562] intel_atomic_check+0x119/0x2b80 [xe]
<4> [515.287740] ? find_held_lock+0x31/0x90
<4> [515.287747] ? lock_release+0xce/0x2a0
<4> [515.287754] drm_atomic_check_only+0x6a2/0xb40
<4> [515.287758] ? drm_atomic_add_affected_connectors+0x12b/0x140
<4> [515.287765] drm_atomic_commit+0x6e/0xf0
<4> [515.287766] ? _pfx__drm_printfn_info+0x10/0x10
<4> [515.287774] drm_client_modeset_commit_atomic+0x25c/0x2b0
<4> [515.287794] drm_client_modeset_commit_locked+0x60/0x1b0
<4> [515.287795] ? mutex_lock_nested+0x1b/0x30
<4> [515.287801] drm_client_modeset_commit+0x26/0x50
<4> [515.287804] __drm_fb_helper_restore_fbdev_mode_unlocked+0xdc/0x110
<4> [515.287810] drm_fb_helper_hotplug_event+0x120/0x140
<4> [515.287814] drm_fbdev_client_hotplug+0x28/0xd0
<4> [515.287819] drm_client_hotplug+0x6c/0xf0
<4> [515.287824] drm_client_dev_hotplug+0x9e/0xd0
<4> [515.287829] drm_kms_helper_hotplug_event+0x1a/0x30
<4> [515.287834] drm_dp_delayed_destroy_work+0x3df/0x410
[drm_display_helper]
<4> [515.287861] process_one_work+0x22b/0x6f0
<4> [515.287874] worker_thread+0x1e8/0x3d0
<4> [515.287879] ? __pfx_worker_thread+0x10/0x10
<4> [515.287882] kthread+0x11c/0x250
<4> [515.287886] ? __pfx_kthread+0x10/0x10
<4> [515.287890] ret_from_fork+0x2d7/0x310
<4> [515.287894] ? __pfx_kthread+0x10/0x10
<4> [515.287897] ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix NULL pointer dereference on panthor_fw_unplug
This patch removes the MCU halt and wait for halt procedures during
panthor_fw_unplug() as the MCU can be in a variety of states or the FW
may not even be loaded/initialized at all, the latter of which can lead
to a NULL pointer dereference.
It should be safe on unplug to just disable the MCU without waiting for
it to halt as it may not be able to. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Initialize new folios before use
KMSAN reports an uninitialized value in longest_match_std(), invoked
from ntfs_compress_write(). When new folios are allocated without being
marked uptodate and ni_read_frame() is skipped because the caller expects
the frame to be completely overwritten, some reserved folios may remain
only partially filled, leaving the rest memory uninitialized. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix ntfs_mount_options leak in ntfs_fill_super()
In ntfs_fill_super(), the fc->fs_private pointer is set to NULL without
first freeing the memory it points to. This causes the subsequent call to
ntfs_fs_free() to skip freeing the ntfs_mount_options structure.
This results in a kmemleak report:
unreferenced object 0xff1100015378b800 (size 32):
comm "mount", pid 582, jiffies 4294890685
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 ed ff ed ff 00 04 00 00 ................
backtrace (crc ed541d8c):
__kmalloc_cache_noprof+0x424/0x5a0
__ntfs_init_fs_context+0x47/0x590
alloc_fs_context+0x5d8/0x960
__x64_sys_fsopen+0xb1/0x190
do_syscall_64+0x50/0x1f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
This issue can be reproduced using the following commands:
fallocate -l 100M test.file
mount test.file /tmp/test
Since sbi->options is duplicated from fc->fs_private and does not
directly use the memory allocated for fs_private, it is unnecessary to
set fc->fs_private to NULL.
Additionally, this patch simplifies the code by utilizing the helper
function put_mount_options() instead of open-coding the cleanup logic. |
| Casdoor versions 2.362.0 and earlier do not verify that a JWT used for token exchange is still active. The GetTokenExchangeToken() function in object/token_oauth.go validates the JWT signature and parses its claims, but never queries the Token table to verify whether the subject token has been revoked or invalidated. Because the revocation check is entirely absent, administrators are unable to terminate active sessions or revoke compromised tokens. |
| Ubuntu Linux 6.8, 6.17 and 7.0 contain AppArmor SAUCE patches which incorrectly validate the size of an internal structure, leading to an out-of-bounds read in notification handling code. The bug can be triggered by an unprivileged local user and can result in information disclosure from adjacent slab objects. |
| A CWE-754: Improper Check for Unusual or Exceptional Conditions vulnerability exists in the Web Server on Modicon M340, Legacy Offers Modicon Quantum and Modicon Premium and associated Communication Modules (see security notification for affected versions), that could cause denial of HTTP and FTP services when a series of specially crafted requests is sent to the controller over HTTP. |
| Ubuntu Linux 6.8, 6.17 and 7.0 contain SAUCE patches with a memory leak in the handling of big responses to AppArmor notifications. The bug can be triggered by an unprivileged local user. The memory leak could lead to resource exhaustion. |
