| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Cybozu Garoon before 4.2.2 allows remote attackers to bypass login authentication via vectors related to API use. |
| Xpress Server in SAP POS does not require authentication for read/write/delete file access. This is SAP Security Note 2520064. |
| A specific device configuration can result in a commit failure condition. When this occurs, a user is logged in without being prompted for a password while trying to login through console, ssh, ftp, telnet or su, etc., This issue relies upon a device configuration precondition to occur. Typically, device configurations are the result of a trusted administrative change to the system's running configuration. The following error messages may be seen when this failure occurs: mgd: error: commit failed: (statements constraint check failed) Warning: Commit failed, activating partial configuration. Warning: Edit the router configuration to fix these errors. If the administrative changes are not made that result in such a failure, then this issue is not seen. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS 12.3 prior to 12.3R10, 12.3R11; 12.3X48 prior to 12.3X48-D20; 13.2 prior to 13.2R8; 13.3 prior to 13.3R7; 14.1 prior to 14.1R4-S12, 14.1R5, 14.1R6; 14.1X53 prior to 14.1X53-D30; 14.2 prior to 14.2R4; 15.1 prior to 15.1F2, 15.1F3, 15.1R2. |
| Builds in Jenkins are associated with an authentication that controls the permissions that the build has to interact with other elements in Jenkins. The Pipeline: Build Step Plugin did not check the build authentication it was running as and allowed triggering any other project in Jenkins. |
| xrdp 0.9.1 calls the PAM function auth_start_session() in an incorrect location, leading to PAM session modules not being properly initialized, with a potential consequence of incorrect configurations or elevation of privileges, aka a pam_limits.so bypass. |
| A vulnerability in the Guest Portal login page of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to perform multiple login attempts in excess of the configured login attempt limit. The vulnerability is due to insufficient server-side login attempt limit enforcement. An attacker could exploit this vulnerability by sending modified login attempts to the Guest Portal login page. An exploit could allow the attacker to perform brute-force password attacks on the ISE Guest Portal. Cisco Bug IDs: CSCve98518. |
| A vulnerability in the web functionality of the Cisco Prime LAN Management Solution could allow an authenticated, remote attacker to hijack another user's administrative session, aka a Session Fixation Vulnerability. The vulnerability is due to the reuse of a preauthentication session token as part of the postauthentication session. An attacker could exploit this vulnerability by obtaining the presession token ID. An exploit could allow an attacker to hijack an existing user's session. Known Affected Releases 4.2(5). Cisco Bug IDs: CSCvf58392. |
| IBM Security Guardium 10.0 and 10.1 does not perform an authentication check for a critical resource or functionality allowing anonymous users access to protected areas. IBM X-Force ID: 124685 |
| An issue was discovered in ABOOT in OnePlus 3 and 3T OxygenOS before 4.0.2. The attacker can reboot the device into the fastboot mode, which could be done without any authentication. A physical attacker can press the "Volume Up" button during device boot, where an attacker with ADB access can issue the adb reboot bootloader command. Then, the attacker can put the platform's SELinux in permissive mode, which severely weakens it, by issuing: fastboot oem selinux permissive. |
| The Debian initrd script for the cryptsetup package 2:1.7.3-2 and earlier allows physically proximate attackers to gain shell access via many log in attempts with an invalid password. |
| A vulnerability in the mesh code of Cisco Wireless LAN Controller (WLC) software could allow an unauthenticated, remote attacker to impersonate a WLC in a meshed topology. The vulnerability is due to insufficient authentication of the parent access point in a mesh configuration. An attacker could exploit this vulnerability by forcing the target system to disconnect from the correct parent access point and reconnect to a rogue access point owned by the attacker. An exploit could allow the attacker to control the traffic flowing through the impacted access point or take full control of the target system. This vulnerability affects the following products running a vulnerable version of Wireless LAN Controller software and configured for meshed mode: Cisco 8500 Series Wireless Controller, Cisco 5500 Series Wireless Controller, Cisco 2500 Series Wireless Controller, Cisco Flex 7500 Series Wireless Controller, Cisco Virtual Wireless Controller, Wireless Services Module 2 (WiSM2). Note that additional configuration is needed in addition to upgrading to a fixed release. Cisco Bug IDs: CSCuc98992 CSCuu14804. |
| A vulnerability in the dynamic access control list (ACL) feature of Cisco IOS XE Software running on Cisco Catalyst 4000 Series Switches could allow an unauthenticated, adjacent attacker to cause dynamic ACL assignment to fail and the port to fail open. This could allow the attacker to pass traffic to the default VLAN of the affected port. The vulnerability is due to an uncaught error condition that may occur during the reassignment of the auth-default-ACL dynamic ACL to a switch port after 802.1x authentication fails. A successful exploit of this issue could allow a physically adjacent attacker to bypass 802.1x authentication and cause the affected port to fail open, allowing the attacker to pass traffic to the default VLAN of the affected switch port. Cisco Bug IDs: CSCvc72751. |
| The custom authentication realm used by karaf-tomcat's "opendaylight" realm in Opendaylight before Helium SR3 will authenticate any username and password combination. |
| 360fly 4K cameras allow unauthenticated Wi-Fi password changes and complete access with REST by using the Bluetooth Low Energy pairing procedure, which is available at any time and does not require a password. This affects firmware 2.1.4. Exploitation can use the 360fly Android or iOS application, or the BlueZ gatttool program. |
| A vulnerability in Cisco WebEx Meetings Server could allow an authenticated, remote attacker to conduct arbitrary password changes against any non-administrative user. More Information: CSCuz03345. Known Affected Releases: 2.6. Known Fixed Releases: 2.7.1.12. |
| Huawei Video Content Management (VCM) before V100R001C10SPC001 does not properly "authenticate online user identities and privileges," which allows remote authenticated users to gain privileges and perform a case operation as another user via a crafted message, aka "Horizontal Privilege Escalation Vulnerability." |
| In Lenovo XClarity Administrator (LXCA) before 1.3.0, if service data is downloaded from LXCA, a non-administrative user may have access to password information for users that have previously authenticated to the LXCA's internal LDAP server, including administrative accounts and service accounts with administrative privileges. This is an issue only for users who have used local authentication with LXCA and not remote authentication against external LDAP or ADFS servers. |
| Some Huawei smart phones with software Berlin-L21C10B130,Berlin-L21C185B133,Berlin-L21HNC10B131,Berlin-L21HNC185B140,Berlin-L21HNC432B151,Berlin-L22C636B160,Berlin-L22HNC636B130,Berlin-L22HNC675B150CUSTC675D001,Berlin-L23C605B131,Berlin-L24HNC567B110,FRD-L02C432B120,FRD-L02C635B130,FRD-L02C675B170CUSTC675D001,FRD-L04C567B162,FRD-L04C605B131,FRD-L09C10B130,FRD-L09C185B130,FRD-L09C432B131,FRD-L09C636B130,FRD-L14C567B162,FRD-L19C10B130,FRD-L19C432B131,FRD-L19C636B130 have a factory Reset Protection (FRP) bypass security vulnerability. When re-configuring the mobile phone using the factory reset protection (FRP) function, an attacker can login the configuration flow by Swype Keyboard and can perform some operations to update the Google account. As a result, the FRP function is bypassed. |
| In Apache Qpid Broker-J 0.18 through 0.32, if the broker is configured with different authentication providers on different ports one of which is an HTTP port, then the broker can be tricked by a remote unauthenticated attacker connecting to the HTTP port into using an authentication provider that was configured on a different port. The attacker still needs valid credentials with the authentication provider on the spoofed port. This becomes an issue when the spoofed port has weaker authentication protection (e.g., anonymous access, default accounts) and is normally protected by firewall rules or similar which can be circumvented by this vulnerability. AMQP ports are not affected. Versions 6.0.0 and newer are not affected. |
| An issue was discovered in dnaTools dnaLIMS 4-2015s13. dnaLIMS is vulnerable to unauthenticated command execution through an improperly protected administrative web shell (cgi-bin/dna/sysAdmin.cgi POST requests). |
