| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: ti: Fix return type of netcp_ndo_start_xmit()
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/net/ethernet/ti/netcp_core.c:1944:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = netcp_ndo_start_xmit,
^~~~~~~~~~~~~~~~~~~~
1 error generated.
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of
netcp_ndo_start_xmit() to match the prototype's to resolve the warning
and CFI failure. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: add EXT4_IGET_BAD flag to prevent unexpected bad inode
There are many places that will get unhappy (and crash) when ext4_iget()
returns a bad inode. However, if iget the boot loader inode, allows a bad
inode to be returned, because the inode may not be initialized. This
mechanism can be used to bypass some checks and cause panic. To solve this
problem, we add a special iget flag EXT4_IGET_BAD. Only with this flag
we'd be returning bad inode from ext4_iget(), otherwise we always return
the error code if the inode is bad inode.(suggested by Jan Kara) |
| A flaw was found in pgproto3. A malicious or compromised PostgreSQL server can exploit this by sending a DataRow message with a negative field length. This input validation vulnerability can lead to a denial of service (DoS) due to a slice bounds out of range panic. |
| A stack overflow flaw was found when reading a BFS file system. A crafted BFS filesystem may lead to an uncontrolled loop, causing grub2 to crash. |
| A flaw was found in grub2. Grub's dump command is not blocked when grub is in lockdown mode, which allows the user to read any memory information, and an attacker may leverage this in order to extract signatures, salts, and other sensitive information from the memory. |
| A flaw was found in grub2. When performing a symlink lookup, the grub's UFS module checks the inode's data size to allocate the internal buffer to read the file content, however, it fails to check if the symlink data size has overflown. When this occurs, grub_malloc() may be called with a smaller value than needed. When further reading the data from the disk into the buffer, the grub_ufs_lookup_symlink() function will write past the end of the allocated size. An attack can leverage this by crafting a malicious filesystem, and as a result, it will corrupt data stored in the heap, allowing for arbitrary code execution used to by-pass secure boot mechanisms. |
| A flaw was found in command/gpg. In some scenarios, hooks created by loaded modules are not removed when the related module is unloaded. This flaw allows an attacker to force grub2 to call the hooks once the module that registered it was unloaded, leading to a use-after-free vulnerability. If correctly exploited, this vulnerability may result in arbitrary code execution, eventually allowing the attacker to bypass secure boot protections. |
| A flaw was found in GnuTLS, which relies on libtasn1 for ASN.1 data processing. Due to an inefficient algorithm in libtasn1, decoding certain DER-encoded certificate data can take excessive time, leading to increased resource consumption. This flaw allows a remote attacker to send a specially crafted certificate, causing GnuTLS to become unresponsive or slow, resulting in a denial-of-service condition. |
| A flaw in libtasn1 causes inefficient handling of specific certificate data. When processing a large number of elements in a certificate, libtasn1 takes much longer than expected, which can slow down or even crash the system. This flaw allows an attacker to send a specially crafted certificate, causing a denial of service attack. |
| Indico is an event management system that uses Flask-Multipass, a multi-backend authentication system for Flask. In versions prior to 3.3.12, due to vulnerabilities in TeXLive and obscure LaTeX syntax that allowed circumventing Indico's LaTeX sanitizer, it is possible to use specially-crafted LaTeX snippets which can read local files or execute code with the privileges of the user running Indico on the server. Note that if server-side LaTeX rendering is not in use (ie `XELATEX_PATH` was not set in `indico.conf`), this vulnerability does not apply. It is recommended to update to Indico 3.3.12 as soon as possible. It is also strongly recommended to enable the containerized LaTeX renderer (using `podman`), which isolates it from the rest of the system. As a workaround, remove the `XELATEX_PATH` setting from `indico.conf` (or comment it out or set it to `None`) and restart the `indico-uwsgi` and `indico-celery` services to disable LaTeX functionality. |
| Knockpy 4.1.1 contains a CSV injection vulnerability that allows attackers to inject malicious formulas into CSV reports through unfiltered server headers. Attackers can manipulate server response headers to include spreadsheet formulas that will execute when the CSV is opened in spreadsheet applications. |
| SyncBreeze 10.0.28 contains a denial of service vulnerability in the login endpoint that allows remote attackers to crash the service. Attackers can send an oversized payload in the login request to overwhelm the application and potentially disrupt service availability. |
| OpenClaw versions prior to 2026.2.25 fail to enforce sender authorization checks for interactive callbacks including block_action, view_submission, and view_closed in shared workspace deployments. Unauthorized workspace members can bypass allowFrom restrictions and channel user allowlists to enqueue system-event text into active sessions. |
| OpenClaw versions prior to 2026.2.23 contain a path traversal vulnerability in the experimental apply_patch tool that allows attackers with sandbox access to modify files outside the workspace directory by exploiting inconsistent enforcement of workspace-only checks on mounted paths. Attackers can use apply_patch operations on writable mounts outside the workspace root to access and modify arbitrary files on the system. |
| OpenClaw versions prior to 2026.2.26 contain an authorization bypass vulnerability where DM pairing-store identities are incorrectly treated as group allowlist identities when dmPolicy=pairing and groupPolicy=allowlist. Remote attackers can send messages and reactions as DM-paired identities without explicit groupAllowFrom membership to bypass group sender authorization checks. |
| Connect-CMS is a content management system. In versions on the 1.x series up to and including 1.41.0 and versions on the 2.x series up to and including 2.41.0, an improper authorization issue in the My Page profile update feature may allow modification of arbitrary user information. Versions 1.41.1 and 2.41.1 contain a patch. |
| Connect-CMS is a content management system. In versions on the 1.x series up to and including 1.41.0 and versions on the 2.x series up to and including 2.41.0, an improper authorization issue in the page content retrieval feature may allow retrieval of non-public information. Versions 1.41.1 and 2.41.1 contain a patch. |
| Connect-CMS is a content management system. In versions on the 1.x series up to and including 1.41.0 and versions on the 2.x series up to and including 2.41.0, a Server-Side Request Forgery (SSRF) issue exists in the external page migration feature of the Page Management Plugin. Versions 1.41.1 and 2.41.1 contain a patch. |
| Connect-CMS is a content management system. In versions on the 1.x series up to and including 1.41.0 and versions on the 2.x series up to and including 2.41.0, a Stored Cross-site Scripting (XSS) issue exists in the file field of the Form Plugin. Versions 1.41.1 and 2.41.1 contain a patch. |
| The CIL compiler in SELinux 3.2 has a use-after-free in cil_reset_classpermission (called from cil_reset_classperms_set and cil_reset_classperms_list). |
