| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| TypeBot is a chatbot builder tool. Prior to version 3.17.0, an authenticated user who has read access to any typebot can resume a waiting webhook session that belongs to a different typebot by mixing an authorized `typebotId` and `blockId` and a foreign live `resultId`. The webhook resume handler authorizes the parent typebot first, but then resolves the descendant `result` only by `resultId`. As a result, an attacker can inject arbitrary webhook JSON into another typebot's suspended session and advance its execution without any access to the victim typebot. Version 3.17.0 patches the issue. |
| Always-incorrect control flow implementation in some firmware for some Intel(R) Xeon(R) processors may allow an escalation of privilege. System software adversary with a privileged user combined with a high complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (high), integrity (high) and availability (none) impacts. |
| A flaw was found in the provider-credential-controller component of multicluster-engine (MCE). An attacker with specific permissions on the hub cluster, and knowledge of a prior credential value, could exploit an authorization bypass vulnerability. By manipulating `copiedFrom` labels, the attacker could intercept newly rotated provider credentials, leading to unauthorized information disclosure. This allows access to sensitive credentials that should otherwise be protected. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix address space mismatch in kexec command line lookup
When searching the loaded segments for the "kexec" command line marker,
the kexec_load(2) path (file_mode == 0) passes the user-space segment
buffer straight to strncmp() through a bogus (char __user *) cast. This
dereferences a user pointer in kernel context, which is wrong and is
flagged by sparse:
arch/loongarch/kernel/machine_kexec.c:84:51: sparse: incorrect type in
argument 2 (different address spaces) @@ expected char const * @@ got
char [noderef] __user *
Here copy the marker-sized prefix of each segment into a small on-stack
buffer with copy_from_user() before comparing, and skip segments that
fault. The subsequent copy_from_user() that stages the full command line
into the safe area is left unchanged. |
| Admidio is an open-source user management solution. `modules/categories.php` checks that the supplied `type` parameter (`ANN`, `EVT`, `ROL`, `USF`, …) corresponds to a module the actor administers. The follow-up "is this specific category editable by me" check at lines 56-61 is dead code because it compares `$getType` (a category-type code) against mode names (`edit`/`save`/`delete`); the condition is permanently false, so `$category->isEditable()` is never invoked. Prior to version 5.0.10, the `delete`, `sequence`, and `save` switch cases load the category by the supplied UUID and act on it without re-checking that the category belongs to a module the actor administers. A user holding only one module-administrator right can therefore destroy or reorder empty categories belonging to *other* modules — for example, an announcements administrator can delete role categories, profile-field categories, or weblink categories that they have no right to touch. Version 5.0.10 fixes the issue. |
| TypeBot is a chatbot builder tool. In version 3.16.1, an authenticated user who has read access to any typebot can resume a WhatsApp preview webhook session that belongs to a different typebot by mixing an authorized `typebotId` and `blockId` and a foreign preview phone number tied to another preview session. The WhatsApp test-webhook handler authorizes the parent typebot first, but then resolves the preview chat session only by `wa-preview-{phone}`. As a result, an attacker can inject arbitrary webhook JSON into another workspace's WhatsApp preview session and advance its draft/unpublished flow without any access to the victim typebot. Version 3.17.0 patches the issue. |
| In Eclipse RDF4J, several XML parser entry points do not fully restrict XML External Entity (XXE) processing when parsing untrusted XML-based RDF data or query results, permitting DOCTYPE declarations, external entity references, and external DTD loading. This is due to an incomplete fix for CVE-2018-1000644: the earlier fix did not cover all parser entry points. The issue is resolved in RDF4J 5.3.2, which rejects or disables DOCTYPE declarations, external entities, and external DTD loading by default. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Fit paired fragment job in the correct CCCB
For geometry jobs with a paired fragment job, at the moment, the
DRM scheduler's prepare_job() callback:
- checks for internal (driver) dependencies for the geometry job;
- calls into pvr_queue_get_paired_frag_job_dep() to check for external
dependencies for the fragment job (the two jobs are submitted together
but the common scheduler code doesn't know about it, so this needs to
be done at this point in time);
- calls into the prepare_job() callback again, but for the fragment job,
to check its internal dependencies as well, passing the fragment job's
drm_sched_job and the geometry job's drm_sched_entity / pvr_queue.
The problem with the last step is that pvr_queue_prepare_job() doesn't
always take the mismatched fragment job and geometry queue into account,
in particular when checking whether there is space for the fragment
command to be submitted, so the code ends up checking for space in the
geometry (i.e. wrong) CCCB.
The rest of the nested prepare_job() callback happens to work fine at
the moment as the other internal dependencies are not relevant for a
paired fragment job.
Move the initialisation of a paired fragment job's done fence and CCCB
fence to pvr_queue_get_paired_frag_job_dep(), inferring the correct
queue from the fragment job itself.
This fixes cases where prepare_job() wrongly assumed that there was
enough space for a paired fragment job in its own CCCB, unblocking
run_job(), which then returned early without writing the full sequence
of commands to the CCCB.
The above lead to kernel warnings such as the following and potentially
job timeouts (depending on waiters on the missing commands):
[ 552.421075] WARNING: drivers/gpu/drm/imagination/pvr_cccb.c:178 at pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr], CPU#2: kworker/u16:5/63
[ 552.421230] Modules linked in:
[ 552.421592] CPU: 2 UID: 0 PID: 63 Comm: kworker/u16:5 Tainted: G W 7.0.0-rc2-gc5d053e4dccb #39 PREEMPT
[ 552.421625] Tainted: [W]=WARN
[ 552.421637] Hardware name: Texas Instruments AM625 SK (DT)
[ 552.421655] Workqueue: powervr-sched drm_sched_run_job_work [gpu_sched]
[ 552.421744] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 552.421766] pc : pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr]
[ 552.421850] lr : pvr_queue_submit_job_to_cccb+0x57c/0xa74 [powervr]
[ 552.421923] sp : ffff800084c47650
[ 552.421936] x29: ffff800084c47740 x28: 0000000000000df8 x27: ffff800088a77000
[ 552.421979] x26: 0000000000000030 x25: ffff800084c47680 x24: 0000000000001000
[ 552.422017] x23: ffff800084c47820 x22: 1ffff00010988ecc x21: 0000000000000008
[ 552.422055] x20: 0000000000000208 x19: ffff000006ad5a88 x18: 0000000000000000
[ 552.422093] x17: 0000000020020000 x16: 0000000000020000 x15: 0000000000000000
[ 552.422130] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 552.422167] x11: 000000000000f2f2 x10: 00000000f3000000 x9 : 00000000f3f3f3f3
[ 552.422204] x8 : 00000000f2f2f200 x7 : ffff700010988ecc x6 : 0000000000000008
[ 552.422241] x5 : 0000000000000000 x4 : 1ffff0001114ee00 x3 : 0000000000000000
[ 552.422278] x2 : 0000000000000007 x1 : 0000000000000fff x0 : 000000000000002f
[ 552.422316] Call trace:
[ 552.422330] pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] (P)
[ 552.422411] pvr_queue_submit_job_to_cccb+0x57c/0xa74 [powervr]
[ 552.422486] pvr_queue_run_job+0x3a4/0x990 [powervr]
[ 552.422562] drm_sched_run_job_work+0x580/0xd48 [gpu_sched]
[ 552.422623] process_one_work+0x520/0x1288
[ 552.422657] worker_thread+0x3f0/0xb3c
[ 552.422679] kthread+0x334/0x3d8
[ 552.422706] ret_from_fork+0x10/0x20 |
| Budibase is an open-source low-code platform. Prior to 3.40.0, POST /api/v2/email on account.budibase.app accepted a client-controlled accountId without binding it to the authenticated session, while checking only currentEmail. An authenticated attacker who obtains a victim account identifier can start the email-change workflow for the victim, receive and submit the verification code through POST /api/v2/email/verification, move the victim email to an attacker-controlled address, and complete a password reset as the victim. This issue is fixed in version 3.40.0. |
| RustFS is a distributed object storage system built in Rust. Prior to 1.0.0-rc.1, RustFS Object Lock enforcement in crates/ecstore/src/bucket/object_lock/objectlock_sys.rs lets check_object_lock_for_deletion, delete_prefix, and lifecycle and scanner sweeps treat ConfigNotFound, unreadable .metadata.bin data, or unparseable metadata as no lock configuration, allowing objects under COMPLIANCE retention to be deleted or expired. This issue is fixed in version 1.0.0-rc.1. |
| FreeCAD is a free and open-source multiplatform 3D parametric modeler. Prior to 1.1.2, the Xerces SAX2 XMLReader constructed in src/Base/Reader.cpp by Base::XMLReader::XMLReader() parses attacker-controlled Document.xml from a crafted .FCStd archive without disabling default external entity resolution or external DTD loading. When Document::restore() opens the document, external entities can read local files through the file URI scheme or initiate server-side requests through the http URI scheme, and resolved content can flow through the characters() callback. This issue is fixed in version 1.1.2. |
| Admidio is an open-source user management solution. Prior to version 5.0.10, `modules/documents-files.php` mode `file_rename_save` shares the same root-cause shape as the cross-folder move bug (`05-documents-cross-folder-move-idor.md`): the top-level rights check at lines 79-89 validates `hasUploadRight()` on the URL parameter `folder_uuid`, but the rename operation acts on `file_uuid` — a separate URL parameter — without re-checking the folder that actually contains the file. `DocumentsService::renameFile()` resolves the target file via `getFileForDownload()` (which permits view-readable files) but does not require upload right on the file's source folder. Result: a user with upload right on any folder A can rename a file in folder B as long as they can view it. They can also overwrite the file's description. Version 5.0.10 contains a fix. |
| Admidio is an open-source user management solution. Prior to version 5.0.10, an authenticated Admidio member with upload rights on any one folder can permanently delete files from folders where they have only view access. The authorization check at the top of `modules/documents-files.php` evaluates upload rights against the attacker-supplied `folder_uuid` URL parameter — not the file's actual parent folder. The `file_delete` handler then only verifies view rights on the file's real location, never upload rights. By passing a folder they legitimately own in `folder_uuid` while targeting a file in a restricted folder via `file_uuid`, an attacker bypasses the upload-right check entirely and permanently deletes the file. This is an incomplete fix of GHSA-rmpj-3x5m-9m5f, which was patched in v5.0.7 but remains exploitable in v5.0.9. User should upgrade to v5.0.10 to receive an updated fix. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: sata_dwc_460ex: fix infinite loop in NCQ tag completion bit-scanning
The hand-rolled bit-scanning loop in the NCQ completion path has an
infinite loop bug. When tag_mask has only high bits set (e.g.
0x80000000), the inner while loop left-shifts tag_mask until it
overflows to 0. At that point !(0 & 1) is always true and 0 <<= 1
stays 0, causing an infinite loop in hardirq context with a spinlock
held.
Replace the open-coded bit-scanning with __ffs() which correctly
finds the least significant set bit and is bounded by the width of
the argument. |
| Protection mechanism failure for some Intel(R) Data Center Attestation Primitives (Intel(R) DCAP) may allow information disclosure. Unprivileged software adversary with an unauthenticated user combined with a low complexity attack may enable data exposure. This result may potentially occur via network access when attack requirements are present with special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (high) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (high), integrity (none) and availability (none) impacts. |
| Protection mechanism failure for some Intel Extension for TensorFlow software before version 2.15.0.3 within Ring 3: User Applications may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires passive user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| IBM Sterling B2B Integrator and IBM Sterling File Gateway 6.2.0.0 through 6.2.0.5_2, 6.2.1.0 through 6.2.1.1_2, and 6.2.2.0 through 6.2.2.0_1 could allow an unauthenticated user to read sensitive information by bypassing authentication through a specially crafted HTTP request. |
| Apache Airflow's environment-variable secrets backend resolved a team-scoped Connection or Variable from the wrong team's scope. The guard meant to prevent this only ran when no team scope was supplied, and its pattern could not match a team name containing an underscore, which team names are allowed to contain. When the guard did not apply, the lookup fell through to an unconditional global read that resolved the stored `AIRFLOW_CONN__<TEAM>___<ID>` variable regardless of which team asked. In multi-team mode an authenticated user of one team could therefore have `POST /api/v2/connections/test` resolve another team's Connection and authenticate outward with that team's credentials; the endpoint uses the credentials rather than returning them. Exploitation requires `[core] multi_team` enabled, `[core] test_connection` set to `Enabled` (it ships `Disabled`), team-scoped secrets provisioned as environment variables in the API-server process, and knowledge of the encoded identifier. Redirecting the test at an attacker-controlled host is separately blocked. Users are advised to upgrade to apache-airflow 3.3.1 or later. |
| The Wallet for WooCommerce WordPress plugin before 1.6.10 does not verify the amount actually collected for a wallet top-up before crediting the wallet, allowing customers to top up their wallet balance for less than its value. |
| The WP Crowdfunding WordPress plugin before 2.2.1 does not verify order ownership before returning order details, allowing any authenticated users such as Subscribers to read the personal data of any WooCommerce order and enumerate every order in the store. |
