| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-net: fix OOB access in ULE extension header tables
The ule_mandatory_ext_handlers[] and ule_optional_ext_handlers[] tables
in handle_one_ule_extension() are declared with 255 elements (valid
indices 0-254), but the index htype is derived from network-controlled
data as (ule_sndu_type & 0x00FF), giving a range of 0-255. When
htype equals 255, an out-of-bounds read occurs on the function pointer
table, and the OOB value may be called as a function pointer.
Add a bounds check on htype against the array size before either table
is accessed. Out-of-range values now cause the SNDU to be discarded. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: validate MTU against usable frame size on bind
AF_XDP bind currently accepts zero-copy pool configurations without
verifying that the device MTU fits into the usable frame space provided
by the UMEM chunk.
This becomes a problem since we started to respect tailroom which is
subtracted from chunk_size (among with headroom). 2k chunk size might
not provide enough space for standard 1500 MTU, so let us catch such
settings at bind time. Furthermore, validate whether underlying HW will
be able to satisfy configured MTU wrt XSK's frame size multiplied by
supported Rx buffer chain length (that is exposed via
net_device::xdp_zc_max_segs). |
| Insufficient validation of untrusted input in ReadingMode in Google Chrome on Mac prior to 148.0.7778.168 allowed a remote attacker who had compromised the renderer process to bypass site Isolation via a crafted HTML page. (Chromium security severity: High) |
| An ACAP configuration file lacked sufficient input validation, which could allow command injection and potentially lead to privilege escalation. This vulnerability can only be exploited if the Axis device is configured to allow the installation of unsigned ACAP applications, and if an attacker convinces the victim to install a malicious ACAP application. |
| A data corruption vulnerability has been identified in the luksmeta utility when used with the LUKS1 disk encryption format. An attacker with the necessary permissions can exploit this flaw by writing a large amount of metadata to an encrypted device. The utility fails to correctly validate the available space, causing the metadata to overwrite and corrupt the user's encrypted data. This action leads to a permanent loss of the stored information. Devices using the LUKS formats other than LUKS1 are not affected by this issue. |
| Insufficient validation of untrusted input in Skia in Google Chrome prior to 148.0.7778.168 allowed a remote attacker who had compromised the renderer process to perform an out of bounds memory write via a crafted print file. (Chromium security severity: Medium) |
| This affects versions of the package exifreader before 4.39.0. A crafted image containing an ICC mluc tag can set an attacker-controlled record count together with a zero record size. During parsing, ExifReader repeatedly processes the same record and appends entries to an array without sufficient bounds validation, causing excessive memory growth. In applications that parse attacker-supplied images, this may lead to denial of service through memory exhaustion. |
| Insufficient validation of untrusted input in SiteIsolation in Google Chrome prior to 148.0.7778.168 allowed a remote attacker who had compromised the renderer process to bypass Site Isolation via a crafted HTML page. (Chromium security severity: High) |
| Insufficient validation of untrusted input in DataTransfer in Google Chrome prior to 148.0.7778.168 allowed a remote attacker who convinced a user to engage in specific UI gestures to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: Critical) |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final and 4.1.133.Final, Netty's DNS codec does not enforce RFC 1035 domain name constraints during either encoding or decoding. This creates a bidirectional attack surface: malicious DNS responses can exploit the decoder, and user-influenced hostnames can exploit the encoder. This vulnerability is fixed in 4.2.13.Final and 4.1.133.Final. |
| Denial-of-service condition in M-Files Server versions before 26.5.16015.0, before 26.2 LTS, and before 25.8 LTS SR3 allows an authenticated user to cause the MFserver process to crash |
| Insufficient parameter sanitization in TEE SOC Driver could allow an attacker to issue a malformed DRV_SOC_CMD_ID_SRIOV_COPY_VF_CHIPLET_REGS to write invalid data to a remote Die, potentially resulting in unexpected behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: require minimum ACE size in smb_check_perm_dacl()
Both ACE-walk loops in smb_check_perm_dacl() only guard against an
under-sized remaining buffer, not against an ACE whose declared
`ace->size` is smaller than the struct it claims to describe:
if (offsetof(struct smb_ace, access_req) > aces_size)
break;
ace_size = le16_to_cpu(ace->size);
if (ace_size > aces_size)
break;
The first check only requires the 4-byte ACE header to be in bounds;
it does not require access_req (4 bytes at offset 4) to be readable.
An attacker who has set a crafted DACL on a file they own can declare
ace->size == 4 with aces_size == 4, pass both checks, and then
granted |= le32_to_cpu(ace->access_req); /* upper loop */
compare_sids(&sid, &ace->sid); /* lower loop */
reads access_req at offset 4 (OOB by up to 4 bytes) and ace->sid at
offset 8 (OOB by up to CIFS_SID_BASE_SIZE + SID_MAX_SUB_AUTHORITIES
* 4 bytes).
Tighten both loops to require
ace_size >= offsetof(struct smb_ace, sid) + CIFS_SID_BASE_SIZE
which is the smallest valid on-wire ACE layout (4-byte header +
4-byte access_req + 8-byte sid base with zero sub-auths). Also
reject ACEs whose sid.num_subauth exceeds SID_MAX_SUB_AUTHORITIES
before letting compare_sids() dereference sub_auth[] entries.
parse_sec_desc() already enforces an equivalent check (lines 441-448);
smb_check_perm_dacl() simply grew weaker validation over time.
Reachability: authenticated SMB client with permission to set an ACL
on a file. On a subsequent CREATE against that file, the kernel
walks the stored DACL via smb_check_perm_dacl() and triggers the
OOB read. Not pre-auth, and the OOB read is not reflected to the
attacker, but KASAN reports and kernel state corruption are
possible. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.5 before 18.9.7, 18.10 before 18.10.6, and 18.11 before 18.11.3 that could have allowed an unauthenticated user to cause denial of service by sending specially crafted payloads on certain API endpoints. |
| Vvveb is a powerful and easy to use CMS with page builder to build websites, blogs or ecommerce stores. Prior to 1.0.8.2, Vvveb CMS does not validate the sign of the quantity parameter on the cart-add endpoint. Submitting a negative integer is accepted by the server and treated as a normal positive line-item, but with the sign carried through into every downstream computation: line total, sub-total, taxes, and grand total all become negative numbers. The customer-facing cart UI then displays a negative grand total to the user, the checkout flow accepts the negative cart, and the resulting order is persisted in the merchant's database with a negative total column. From the merchant's order management dashboard, this surfaces as a real order with a negative total — an "the merchant owes the customer money" record that no legitimate workflow ever creates. This vulnerability is fixed in 1.0.8.2. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.3 before 18.9.7, 18.10 before 18.10.6, and 18.11 before 18.11.3 that could have allowed an authenticated user with developer-role permissions to bypass package protection rules due to improper access control. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER
When registering VTL0 memory via MSHV_ADD_VTL0_MEMORY, the kernel
computes pgmap->vmemmap_shift as the number of trailing zeros in the
OR of start_pfn and last_pfn, intending to use the largest compound
page order both endpoints are aligned to.
However, this value is not clamped to MAX_FOLIO_ORDER, so a
sufficiently aligned range (e.g. physical range
[0x800000000000, 0x800080000000), corresponding to start_pfn=0x800000000
with 35 trailing zeros) can produce a shift larger than what
memremap_pages() accepts, triggering a WARN and returning -EINVAL:
WARNING: ... memremap_pages+0x512/0x650
requested folio size unsupported
The MAX_FOLIO_ORDER check was added by
commit 646b67d57589 ("mm/memremap: reject unreasonable folio/compound
page sizes in memremap_pages()").
Fix this by clamping vmemmap_shift to MAX_FOLIO_ORDER so we always
request the largest order the kernel supports, in those cases, rather
than an out-of-range value.
Also fix the error path to propagate the actual error code from
devm_memremap_pages() instead of hard-coding -EFAULT, which was
masking the real -EINVAL return. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipa: fix event ring index not programmed for IPA v5.0+
For IPA v5.0+, the event ring index field moved from CH_C_CNTXT_0 to
CH_C_CNTXT_1. The v5.0 register definition intended to define this
field in the CH_C_CNTXT_1 fmask array but used the old identifier of
ERINDEX instead of CH_ERINDEX.
Without a valid event ring, GSI channels could never signal transfer
completions. This caused gsi_channel_trans_quiesce() to block
forever in wait_for_completion().
At least for IPA v5.2 this resolves an issue seen where runtime
suspend, system suspend, and remoteproc stop all hanged forever. It
also meant the IPA data path was completely non functional. |
| Insufficient parameter sanitization in TEE SOC Driver could allow an attacker to issue a malformed DRV_SOC_CMD_ID_SRIOV_CHECK_TA_COMPAT to cause incorrect shared memory mapping, potentially resulting in unexpected behavior. |
| Improper Input Validation vulnerability in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.21, from 10.1.0-M1 through 10.1.54, from 9.0.0.M1 through 9.0.117, from 10.0.0-M1 through 10.0.27.
Older, end of support versions may also be affected.
Users are recommended to upgrade to version [FIXED_VERSION], which fixes the issue. |
