| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Jenkins Job Import Plugin 143.v044a_2e819b_27 and earlier does not perform a permission check in an HTTP endpoint, allowing attackers with Overall/Read permission to enumerate credentials IDs of credentials stored in Jenkins. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential UAF and double free in smb2_open_file()
Zero out @err_iov and @err_buftype before retrying SMB2_open() to
prevent an UAF bug if @data != NULL, otherwise a double free. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix UMR hang in LAG error state unload
During firmware reset in LAG mode, a race condition causes the driver
to hang indefinitely while waiting for UMR completion during device
unload. See [1].
In LAG mode the bond device is only registered on the master, so it
never sees sys_error events from the slave.
During firmware reset this causes UMR waits to hang forever on unload
as the slave is dead but the master hasn't entered error state yet, so
UMR posts succeed but completions never arrive.
Fix this by adding a sys_error notifier that gets registered before
MLX5_IB_STAGE_IB_REG and stays alive until after ib_unregister_device().
This ensures error events reach the bond device throughout teardown.
[1]
Call Trace:
__schedule+0x2bd/0x760
schedule+0x37/0xa0
schedule_preempt_disabled+0xa/0x10
__mutex_lock.isra.6+0x2b5/0x4a0
__mlx5_ib_dereg_mr+0x606/0x870 [mlx5_ib]
? __xa_erase+0x4a/0xa0
? _cond_resched+0x15/0x30
? wait_for_completion+0x31/0x100
ib_dereg_mr_user+0x48/0xc0 [ib_core]
? rdmacg_uncharge_hierarchy+0xa0/0x100
destroy_hw_idr_uobject+0x20/0x50 [ib_uverbs]
uverbs_destroy_uobject+0x37/0x150 [ib_uverbs]
__uverbs_cleanup_ufile+0xda/0x140 [ib_uverbs]
uverbs_destroy_ufile_hw+0x3a/0xf0 [ib_uverbs]
ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs]
remove_client_context+0x8b/0xd0 [ib_core]
disable_device+0x8c/0x130 [ib_core]
__ib_unregister_device+0x10d/0x180 [ib_core]
ib_unregister_device+0x21/0x30 [ib_core]
__mlx5_ib_remove+0x1e4/0x1f0 [mlx5_ib]
auxiliary_bus_remove+0x1e/0x30
device_release_driver_internal+0x103/0x1f0
bus_remove_device+0xf7/0x170
device_del+0x181/0x410
mlx5_rescan_drivers_locked.part.10+0xa9/0x1d0 [mlx5_core]
mlx5_disable_lag+0x253/0x260 [mlx5_core]
mlx5_lag_disable_change+0x89/0xc0 [mlx5_core]
mlx5_eswitch_disable+0x67/0xa0 [mlx5_core]
mlx5_unload+0x15/0xd0 [mlx5_core]
mlx5_unload_one+0x71/0xc0 [mlx5_core]
mlx5_sync_reset_reload_work+0x83/0x100 [mlx5_core]
process_one_work+0x1a7/0x360
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x116/0x130
? kthread_flush_work_fn+0x10/0x10
ret_from_fork+0x22/0x40 |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: use READ_ONCE() to read struct ublksrv_ctrl_cmd
struct ublksrv_ctrl_cmd is part of the io_uring_sqe, which may lie in
userspace-mapped memory. It's racy to access its fields with normal
loads, as userspace may write to them concurrently. Use READ_ONCE() to
copy the ublksrv_ctrl_cmd from the io_uring_sqe to the stack. Use the
local copy in place of the one in the io_uring_sqe. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Stop job scheduling across aie2_release_resource()
Running jobs on a hardware context while it is in the process of
releasing resources can lead to use-after-free and crashes.
Fix this by stopping job scheduling before calling
aie2_release_resource() and restarting it after the release completes.
Additionally, aie2_sched_job_run() now checks whether the hardware
context is still active. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccree - fix a memory leak in cc_mac_digest()
Add cc_unmap_result() if cc_map_hash_request_final()
fails to prevent potential memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix re-decryption of RESPONSE packets
If a RESPONSE packet gets a temporary failure during processing, it may end
up in a partially decrypted state - and then get requeued for a retry.
Fix this by just discarding the packet; we will send another CHALLENGE
packet and thereby elicit a further response. Similarly, discard an
incoming CHALLENGE packet if we get an error whilst generating a RESPONSE;
the server will send another CHALLENGE. |
| In the Linux kernel, the following vulnerability has been resolved:
of: unittest: fix use-after-free in testdrv_probe()
The function testdrv_probe() retrieves the device_node from the PCI
device, applies an overlay, and then immediately calls of_node_put(dn).
This releases the reference held by the PCI core, potentially freeing
the node if the reference count drops to zero. Later, the same freed
pointer 'dn' is passed to of_platform_default_populate(), leading to a
use-after-free.
The reference to pdev->dev.of_node is owned by the device model and
should not be released by the driver. Remove the erroneous of_node_put()
to prevent premature freeing. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: Fix potentially leftover ep1_in_urb at error path
The previous fix for handling the error from setup_card() missed that
an internal URB cdev->ep1_in_urb might have been already submitted
beforehand. In the normal case, this URB gets killed at the
disconnection, but in the error path, we didn't do it, hence there can
be a potential leak.
Fix it in the error path for setup_card(), too. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Add spectre boundry for syscall dispatch table
The LoongArch syscall number is directly controlled by userspace, but
does not have a array_index_nospec() boundry to prevent access past the
syscall function pointer tables. |
| Webmin before 2.640 does not safely construct a filename for saving of an attachment within the mailboxes component. This occurs in mailboxes/detachall.cgi. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cio: Fix device lifecycle handling in css_alloc_subchannel()
`css_alloc_subchannel()` calls `device_initialize()` before setting up
the DMA masks. If `dma_set_coherent_mask()` or `dma_set_mask()` fails,
the error path frees the subchannel structure directly, bypassing
the device model reference counting.
Once `device_initialize()` has been called, the embedded struct device
must be released via `put_device()`, allowing the release callback to
free the container structure.
Fix the error path by dropping the initial device reference with
`put_device()` instead of calling `kfree()` directly.
This ensures correct device lifetime handling and avoids potential
use-after-free or double-free issues. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Fix use-after-free in iomap inline data write path
The inline data buffer head (dibh) is being released prematurely in
gfs2_iomap_begin() via release_metapath() while iomap->inline_data
still points to dibh->b_data. This causes a use-after-free when
iomap_write_end_inline() later attempts to write to the inline data
area.
The bug sequence:
1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode
metadata into dibh
2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode)
3. Calls release_metapath() which calls brelse(dibh), dropping refcount
to 0
4. kswapd reclaims the page (~39ms later in the syzbot report)
5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data
6. KASAN detects use-after-free write to freed memory
Fix by storing dibh in iomap->private and incrementing its refcount
with get_bh() in gfs2_iomap_begin(). The buffer is then properly
released in gfs2_iomap_end() after the inline write completes,
ensuring the page stays alive for the entire iomap operation.
Note: A C reproducer is not available for this issue. The fix is based
on analysis of the KASAN report and code review showing the buffer head
is freed before use.
[agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid
leaks in gfs2_iomap_get() and gfs2_iomap_alloc().] |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't set EXT4_GET_BLOCKS_CONVERT when splitting before submitting I/O
When allocating blocks during within-EOF DIO and writeback with
dioread_nolock enabled, EXT4_GET_BLOCKS_PRE_IO was set to split an
existing large unwritten extent. However, EXT4_GET_BLOCKS_CONVERT was
set when calling ext4_split_convert_extents(), which may potentially
result in stale data issues.
Assume we have an unwritten extent, and then DIO writes the second half.
[UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUUUUUUUUUUU] extent status tree
|<- ->| ----> dio write this range
First, ext4_iomap_alloc() call ext4_map_blocks() with
EXT4_GET_BLOCKS_PRE_IO, EXT4_GET_BLOCKS_UNWRIT_EXT and
EXT4_GET_BLOCKS_CREATE flags set. ext4_map_blocks() find this extent and
call ext4_split_convert_extents() with EXT4_GET_BLOCKS_CONVERT and the
above flags set.
Then, ext4_split_convert_extents() calls ext4_split_extent() with
EXT4_EXT_MAY_ZEROOUT, EXT4_EXT_MARK_UNWRIT2 and EXT4_EXT_DATA_VALID2
flags set, and it calls ext4_split_extent_at() to split the second half
with EXT4_EXT_DATA_VALID2, EXT4_EXT_MARK_UNWRIT1, EXT4_EXT_MAY_ZEROOUT
and EXT4_EXT_MARK_UNWRIT2 flags set. However, ext4_split_extent_at()
failed to insert extent since a temporary lack -ENOSPC. It zeroes out
the first half but convert the entire on-disk extent to written since
the EXT4_EXT_DATA_VALID2 flag set, but left the second half as unwritten
in the extent status tree.
[0000000000SSSSSS] data S: stale data, 0: zeroed
[WWWWWWWWWWWWWWWW] on-disk extent W: written extent
[WWWWWWWWWWUUUUUU] extent status tree
Finally, if the DIO failed to write data to the disk, the stale data in
the second half will be exposed once the cached extent entry is gone.
Fix this issue by not passing EXT4_GET_BLOCKS_CONVERT when splitting
an unwritten extent before submitting I/O, and make
ext4_split_convert_extents() to zero out the entire extent range
to zero for this case, and also mark the extent in the extent status
tree for consistency. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Sync interrupt shadow to cached vmcb12 after VMRUN of L2
After VMRUN in guest mode, nested_sync_control_from_vmcb02() syncs
fields written by the CPU from vmcb02 to the cached vmcb12. This is
because the cached vmcb12 is used as the authoritative copy of some of
the controls, and is the payload when saving/restoring nested state.
int_state is also written by the CPU, specifically bit 0 (i.e.
SVM_INTERRUPT_SHADOW_MASK) for nested VMs, but it is not sync'd to
cached vmcb12. This does not cause a problem if KVM_SET_NESTED_STATE
preceeds KVM_SET_VCPU_EVENTS in the restore path, as an interrupt shadow
would be correctly restored to vmcb02 (KVM_SET_VCPU_EVENTS overwrites
what KVM_SET_NESTED_STATE restored in int_state).
However, if KVM_SET_VCPU_EVENTS preceeds KVM_SET_NESTED_STATE, an
interrupt shadow would be restored into vmcb01 instead of vmcb02. This
would mostly be benign for L1 (delays an interrupt), but not for L2. For
L2, the vCPU could hang (e.g. if a wakeup interrupt is delivered before
a HLT that should have been in an interrupt shadow).
Sync int_state to the cached vmcb12 in nested_sync_control_from_vmcb02()
to avoid this problem. With that, KVM_SET_NESTED_STATE restores the
correct interrupt shadow state, and if KVM_SET_VCPU_EVENTS follows it
would overwrite it with the same value. |
| uniget is a universal installer and updater for (container) tools. Prior to 0.27.1, a command injection vulnerability exists in uniget due to unsafe execution of the check field from metadata files using /bin/bash -c. Because the check field is loaded directly from untrusted JSON metadata without validation or sanitization, an attacker can craft malicious metadata that executes arbitrary shell commands on the victim’s system when common uniget operations such as describe, install, update, or inspect are performed. This vulnerability can lead to arbitrary code execution with the privileges of the user running uniget. This vulnerability is fixed in 0.27.1. |
| OpenLearnX is an open-source, decentralized learning and assessment platform. Prior to 2.0.4, a critical authentication vulnerability was identified in OpenLearnX that could allow unauthorized access to user accounts under specific conditions. This vulnerability is fixed in 2.0.4. |
| FastNetMon Community Edition through 1.2.9 contains a configuration injection vulnerability in the Juniper router integration plugin. In src/juniper_plugin/fastnetmon_juniper.php, the $IP_ATTACK variable (received from argv[1]) is directly interpolated into Juniper NETCONF set-configuration commands at lines 69 and 90 without any validation or sanitization. Line 69: $conn->load_set_configuration("set routing-options static route {$IP_ATTACK} community 65535:666 discard"). Line 90: $conn->load_set_configuration("delete routing-options static route {$IP_ATTACK}/32"). An attacker who can control the IP address string can inject additional Juniper CLI configuration commands by embedding newline characters followed by arbitrary set/delete commands. This could modify the router's routing table, firewall filters, user accounts, or any other configuration element accessible via NETCONF. The impact is full router compromise. |
| SpSoft AppLock (com.sp.protector.free) 7.9.40 for Android allows a local attacker with physical access to bypass fingerprint or PIN authentication. Although the app integrates Android's biometric mechanisms, the lock is implemented with a custom overlay that fails to consistently enforce authentication. By navigating cascading interface flows - insecure navigation through exposed routes facilitates app control evasion {I.N.T.E.R.F.A.C.E] via advertisement or browser intents - an attacker can exit the lock interface without re-authentication and access protected apps (e.g., Chrome). This results in information disclosure and privilege escalation. |
| A NULL pointer dereference in GPAC MP4Box: when parsing certain truncated MP4 files, an unknown/invalid stsd entry can result in missing descriptor fields (e.g., codec/mime/profile strings). gf_media_map_esd then calls strlen() on a NULL pointer, triggering a crash (ASan SEGV). |
