| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01775984; Issue ID: MSV-8907. |
| In afe, there is a possible memory corruption due to use after free. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11431394; Issue ID: MSV-9921. |
| In usb, there is a possible memory corruption due to use after free. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11411985; Issue ID: MSV-9750. |
| In usb, there is a possible memory corruption due to double free. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11411924; Issue ID: MSV-9748. |
| In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01338165; Issue ID: MSV-9660. |
| In the Linux kernel, the following vulnerability has been resolved:
asymmetric_keys: reject trust keys without IDs
The PKCS#8 parser deliberately leaves the asym_key_ids payload slot
empty. key_or_keyring_common() unconditionally dereferences that slot
when a PKCS#8 key is supplied to a key_or_keyring restriction. Both the
plain and :chain forms reach this branch, allowing an unprivileged caller
to trigger a NULL pointer dereference through KEYCTL_RESTRICT_KEYRING
followed by add_key().
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:key_or_keyring_common (crypto/asymmetric_keys/restrict.c:205 crypto/asymmetric_keys/restrict.c:279)
Call Trace:
<TASK>
__key_create_or_update (security/keys/key.c:884)
key_create_or_update (security/keys/key.c:1021)
__do_sys_add_key (security/keys/keyctl.c:134)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Kernel panic - not syncing: Fatal exception
Reject an asymmetric restriction key without key IDs. A PKCS#8 private
key cannot identify the signer of a candidate certificate and is not a
valid trust anchor. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: Protect the read method check against type removal
keyctl_read_key() checks key->type->read without holding key->sem.
A reference keeps the key alive, but does not pin the module containing
its type. A surviving RxRPC key can therefore be read while AF_RXRPC
is being unloaded:
KEYCTL_READ task Module unload and key GC
---------------- ------------------------
lookup_user_key()
permission / possession checks
load key->type
af_rxrpc_exit()
unregister_key_type()
GC: down_write(key->sem)
GC: retype to key_type_dead
GC: up_write(key->sem)
unregister_key_type() returns
free_module()
read saved type's read member
The final access can read freed module storage. The read invocation in
__keyctl_read_key() is already protected by key->sem, but the earlier
method check is outside that critical section.
Move the method check into __keyctl_read_key(), after key_validate() and
under its existing read hold on key->sem. The check and invocation then
use the same protected type for length queries and every read retry.
The GC cannot retype the key until the semaphore is released, and type
unregistration waits for that GC pass before the module can be freed.
Return -EOPNOTSUPP when validation succeeds and the type has no read
method. A temporary buffer may now be allocated before this result;
allocation and copying to userspace remain outside the semaphore. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: make keyring indexes independent of kernel addresses
KEYCTL_READ returns the serial numbers in a keyring in associative-array
traversal order. The first word of the index is a public, deterministic
hash of the type pointer, domain pointer and description. An unprivileged
user can therefore insert keys with known descriptions, predict their
order for each possible KASLR slide, and recover the kernel image address.
On an x86-64 build with 16 MiB alignment, 45 user keys suffice to
distinguish the candidate slides.
Remove the addresses from the whole index, not just its first hash word.
Assign each key type and domain a nonzero 64-bit ID and hash those IDs and
the description with a once-initialized SipHash key. Use the full IDs in
the later index chunks as well. Truncating or hashing the IDs there would
lose the guarantee that distinct type/domain/description tuples have a
differing index bit.
Allocate IDs lazily since private key types need not be registered. Cache
them in the index key so tree walks and copies of an existing index do not
need to dereference a type descriptor that may have been unregistered.
Keep the 32-bit chunk layout and diff_objects() bit offsets consistent,
and retain the separate root slot for keyrings used by recursive search.
The key comparison, permissions and userspace data format are unchanged;
only the address-dependent in-memory ordering is replaced. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: Avoid the owner account dereference in named keyring lookup
Named keyring lookup must keep the storage containing the owner UID
alive through the namespace mapping check. find_keyring_by_name()
reads keyring->user->uid under keyring_name_lock, but that lock protects
the keyring's name entry and allocation, not its separate key_user.
A named session-keyring join can overlap a privileged KEYCTL_CHOWN on
another CPU. If the keyring holds the last reference to its old dynamic
key_user and the ownership transfer succeeds, the following ordering is
possible:
Named join Chown
find_keyring_by_name() keyctl_chown_key()
read_lock(keyring_name_lock) down_write(key->sem)
load old keyring->user
replace key->user and key->uid
up_write(key->sem)
key_put(key)
key_user_put(old user): free
read old user->uid
read_unlock(keyring_name_lock)
Chown neither takes keyring_name_lock nor key_session_mutex, so it can
free the old account between the pointer load and the UID read. The
lookup then reads freed memory even though the keyring itself is alive.
Use keyring->uid for the mapping check. key_alloc() initializes this
inline owner UID and keyctl_chown_key() updates it on chown.
The existing name lock keeps its containing keyring allocated throughout
the check, so lookup no longer depends on the account's lifetime. This
also matches the owner UID used by the permission check.
KASAN report as below:
BUG: KASAN: slab-use-after-free in find_keyring_by_name+0x577/0x5d0
Read of size 4 at addr ffff8881128ae2ec by task keycase/500 |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/cmd: don't leave list poison in ->hash_node
io_uring_cmd_del_cancelable() uses hlist_del() to take a command off
->cancelable_uring_cmd, which leaves LIST_POISON1/2 behind in
->hash_node. Requests are recycled through the request cache without
being reinitialised, and not every user of ->hash_node sets it up before
it is used:
If a vectored futex wait is woken while futex_wait_multiple_setup() is
still queueing the futexes, io_futexv_wait() doesn't add the request to
->futex_list, and leaves the completion to the task_work queued by the
wake up. io_futexv_complete() ends in __io_futex_complete(), whose
hlist_del_init() is fine for a request that is unhashed, which is how all
other users of the node leave it. If the request was a cancelable
uring_cmd in its previous life, e.g. a ublk FETCH_REQ, it writes through
LIST_POISON2:
Oops: general protection fault, probably for non-canonical address
KASAN: maybe wild-memory-access in range [0xdead000000000120-...]
RIP: 0010:io_futexv_complete+0x219/0x420
Call Trace:
tctx_task_work_run+0x804/0x950
tctx_task_work+0x71/0xa0
task_work_run+0x118/0x200
Leave the node unhashed. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/waitid: own the request before clearing ->head
io_waitid_remove_wq() only takes the wait queue lock if ->head is set.
io_waitid_wait() clears ->head first thing, before it tries to become the
owner of the request by bumping ->refs. If somebody else owns the request
at that point, nothing keeps it from completing the request while the
wake up handler is still going to touch it:
CPU0 (io_waitid_wait) CPU1 (io_waitid, holds a ref)
list_del_init(&wait->entry)
smp_store_release(&iw->head, NULL)
__do_wait() finds another child
io_waitid_remove_wq()
// ->head == NULL, no locking
io_waitid_finish(), IOU_COMPLETE
// request freed and reused
atomic_fetch_inc(&iw->refs)
The same goes for __io_waitid_cancel() if it claims the request in that
window. ->refs is part of the per opcode data of the request, so this
increments whatever the next user of the request keeps there. If that
happens to be zero, the handler concludes that it owns the request, and
queues io_waitid_cb() for it. With the window held open by a delay, and
the request reused for a receive that is waiting for data:
BUG: KASAN: slab-use-after-free in __wake_up_common+0x1ca/0x1f0
__wake_up_sync_key+0x36/0x50
sock_def_readable+0xf1/0x420
unix_stream_sendmsg+0x60b/0x1110
Allocated by task 87:
io_arm_apoll+0x1ed/0x940
Freed by task 87:
__io_submit_flush_completions+0x118d/0x1a10
tctx_task_work_run+0x327/0x950
Only clear ->head once the handler owns the request. If it doesn't, the
owner finds ->head set and has to wait for the lock, which is held by the
caller of the handler. Deleting the already deleted entry again is
harmless. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Unregister field variable histograms when the command fails
An action that names a field on another event needs that field as a
variable, so create_field_var_hist() registers a second hist trigger on
that event to provide it, and records it in
target_hist_data->field_var_hists[].
If a later part of the same command fails, create_actions() returns an
error and event_hist_trigger_parse() jumps to out_free. The write fails
with -EINVAL and sched_switch gets no trigger, but:
# echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> \
events/sched/sched_waking/trigger
# echo 'my_synth u64 lat; int a; int b' >> synthetic_events
# echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:\
onmatch(sched.sched_waking).my_synth($wakeup_lat,prio,nosuchfld)'\
>> events/sched/sched_switch/trigger
# cat events/sched/sched_waking/trigger
hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active]
hist:keys=pid:vals=hitcount:synthetic_prio=prio:sort=hitcount:size=2048 [active]
The second histogram is the one created for 'prio'. It is still active and
still counting.
out_free reaches destroy_field_var_hists(), which frees the
field_var_hists[] entries, but never unregister_field_var_hists(), which is
what removes the triggers and runs only from event_hist_trigger_free(). The
entry is freed and the trigger is left with nothing tracking it.
Unregister the field variable histograms in out_free as well, and record
each one as soon as its trigger is registered rather than after the lookup
that follows it, so no exit can leave a registered trigger untracked. The
entry then belongs to field_var_hists[] and is released by
destroy_field_var_hists(), so freeing it on that exit would be a double
free. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Reject incomplete event filter expressions
A non-empty expression normally finishes in predicate_parse()'s inner
loop, which resolves the pending logical operators before jumping to
finalization. If the input ends after an operator, possibly followed by
unary '!' tokens, the outer loop instead falls through with unresolved
operator state.
For example, "common_pid == 1 || common_pid == 2 &&" leaves
prog[0].target equal to -1. The second pass then reads prog[-1] before
the forward-jump check can reject it. Depending on adjacent slab
contents, it can also copy an out-of-bounds word into a branch target
that passes the forward-only check. A self-targeted perf tracepoint
counting event can reach this path through PERF_EVENT_IOC_SET_FILTER.
Reject the outer-loop fallthrough when a predicate has already been
parsed. This ensures that non-empty expressions only reach finalization
after the inner loop has resolved their operators. Keep the existing
no-filter error for input that has no predicates. Add a regression test
for trailing logical operators and unary negations. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/waitid: prevent cancel reference wrap
io_waitid packs the cancellation state into bit 31 of ->refs and uses
bits 30:0 as a 31-bit reference counter:
#define IO_WAITID_CANCEL_FLAG BIT(31)
#define IO_WAITID_REF_MASK GENMASK(30, 0)
__io_waitid_cancel() marks a request canceled, then increments the low
bits of ->refs to claim completion ownership. When another path owns the
request, the increment remains even though cancellation returns false.
The request remains discoverable by cancellation, so repeated failed
attempts can wrap the 31-bit reference field to zero. A later
cancellation can claim ownership and complete the request a second time.
Use atomic_fetch_or() when setting the cancel flag and inspect the old
flag value. The first cancel attempt continues to the existing ownership
increment, preserving its wake and issuer handoff semantics. Later
attempts see the cancel flag and return without incrementing the
reference field.
This makes repeated failed cancellation attempts idempotent while
leaving the first-cancel state transitions unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: don't lose the signal that ends work
When a thread exits, only its tracked requests are cancelled. Then its
io-wq is torn down. io_wq_exit_workers() signals every worker, to get it
out of an interruptible sleep, and waits for all of them to exit. Before
they do, they go through the work that is left. Unbounded work is
cancelled. Bounded work is run, as it is expected to end by itself.
Not all of it does. An open has no file yet, so it counts as bounded, and
the open of a FIFO waits for the other end. That is what the signal is for.
But the workers are signalled once, and a worker that hasn't started the
work by then loses the signal:
io_wq_exit_workers() io_worker_handle_work()
io_wq_worker_wake()
set TIF_NOTIFY_SIGNAL
io_assign_current_work()
io_run_task_work()
clear TIF_NOTIFY_SIGNAL
io_wq_submit_work()
fifo_open()
wait_for_partner()
wait_for_completion_timeout()
The thread never gets out of do_exit():
IORING_OP_OPENAT of a FIFO without a writer, IOSQE_ASYNC
exit of the thread that has submitted it
hangs in more than 9 of 10 attempts (4 CPUs, KVM), until the process is
killed.
Set TIF_NOTIFY_SIGNAL for bounded work that is started with IO_WQ_BIT_EXIT
set. The bit is set before the workers are signalled, and it is tested
after the flag has been cleared, with clear_notify_signal() providing the
barrier. So either the flag stays, or the bit is seen.
Work that is started while the io-wq exits is treated like work that is
being run at that time: it isn't interrupted unless it waits
interruptibly. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/histograms: Verify event_call identity when updating synth_event refcount
In event_hist_trigger_parse() and hist_unreg_all(), the histogram
registration and unregistration paths look up find_synth_event() using
trace_event_name(file->event_call) and adjust se->ref if a match is
found.
Because find_synth_event() only compares the event basename, registering
or removing a histogram on a non-synthetic trace event whose basename
matches a synthetic event erroneously modifies the synthetic event's
reference count. If a histogram is registered on the non-synthetic
event before the synthetic event is created and removed afterwards,
se->ref is decremented without a matching increment, allowing the
synthetic event to be freed while an active histogram action still holds
a pointer to it.
Introduce find_synth_event_call() to verify that &se->call matches
file->event_call before adjusting se->ref. |
| Protection mechanism failure for some Intel(R) LLM Library for PyTorch within Ring 3: User Applications may allow an escalation of privilege. Unprivileged software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires passive user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Protection mechanism failure for some Intel Extension for TensorFlow software before version 2.15.0.3 within Ring 3: User Applications may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires passive user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| A security vulnerability has been detected in AndyFactory newspaper4k up to 0.9.6. This affects the function Article.parse of the file newspaper/extractors/image_extractor.py of the component Image Extractor. Such manipulation leads to server-side request forgery. It is possible to launch the attack remotely. Upgrading to version 0.9.6.1 mitigates this issue. The name of the patch is eec5fab21897c14667c98f5ba1831ebd3a692dd4. Upgrading the affected component is advised. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| An authorization issue was addressed with improved state management. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2. An app may be able to read the device's name. |
