| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Partial string comparison in Windows HTTP Protocol Stack allows an unauthorized attacker to perform tampering over an adjacent network. |
| Docker Sandboxes (sbx) applies the read-only intent of a runtime host mount to the in-guest container bind only: the underlying virtio-fs host-edge grant is added to the sandbox's policy-share allowlist with no access mode. The directory stays writable at its shared-export path, so unprivileged code inside the sandbox can derive that path and write to a host directory the operator attached read-only. |
| An insecure handling of serialized objects vulnerability was found in the one of the service of GMS application 9.5.1 (Build 9510.1044) and earlier versions. A local attacker with the ability to interact with the service could exploit this behavior to perform unauthorized actions through the affected component. |
| Use after free in Windows Modern Device Management (MDM) allows an authorized attacker to elevate privileges locally. |
| Improper handling of overlap between protected memory ranges for some Intel(R) Xeon(R) 6 processors when using Intel(R) TDX within SMM may allow an escalation of privilege. SMM adversary with a privileged user combined with a high complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present with special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Heap-based buffer overflow in Windows Imaging Component allows an unauthorized attacker to execute code locally. |
| RustFS is a distributed object storage system built in Rust. Prior to 1.0.0-beta.12, an anonymous ListObjectVersions request in rustfs/src/storage/access.rs that lacks a direct bucket-policy grant falls back to an s3:ListBucket check and returns before the policy_allowed path applies deny_anonymous_table_data_plane_if_needed and RestrictPublicBuckets, so a bucket that permits anonymous listing can continue exposing version listings after an operator enables the public-access control. The bypass affects GET /<bucket>?versions= and can disclose object version metadata even though equivalent GetObject requests are denied. This issue is fixed in version 1.0.0-beta.12. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: check access to copy_file_range source with src mounter creds
Commit 5dae222a5ff0c ("vfs: allow copy_file_range to copy across devices")
allowed filesystems that implement the copy_file_range() f_op to decide
if they want to access cross-sb copy from/to the same fs type.
The same commit added checks to verify same sb copy for filesystems that
implement ->copy_file_range() and do not support cross-sb copy at the
time, namely, to ceph, fuse and nfs.
The two remaining fs which implement ->copy_file_range(), cifs and
overlayfs started to support cross-sb copy from this time.
While overlayfs does support cross-sb copy when the two underlying files
are on the same base fs, the copy operation on the two real files from
two different overalyfs filesystems is performed with the mounter
creds of the destination overlayfs and the read permission access hook
for the source file was called with the wrong creds.
This could cause either deny of access to copy which would otherwise be
allowed (e.g. with splice) or allow read access to file which would
otherwise be denied.
Fix the latter case by explicitly verifying read access to source file
with the source overlayfs mounter creds.
The former case remains a quirk of cross-sb overlayfs copy, but
userspace could fall back to regular copy so no harm done. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: sata_dwc_460ex: fix infinite loop in NCQ tag completion bit-scanning
The hand-rolled bit-scanning loop in the NCQ completion path has an
infinite loop bug. When tag_mask has only high bits set (e.g.
0x80000000), the inner while loop left-shifts tag_mask until it
overflows to 0. At that point !(0 & 1) is always true and 0 <<= 1
stays 0, causing an infinite loop in hardirq context with a spinlock
held.
Replace the open-coded bit-scanning with __ffs() which correctly
finds the least significant set bit and is bounded by the width of
the argument. |
| Coturn is a free open source implementation of TURN and STUN Server. Prior to 4.16.0, addr_less_eq() in src/client/ns_turn_ioaddr.c uses a component-wise comparison for native IPv6 min-max intervals in ioa_addr_in_range(), allowing an authenticated TURN client to relay to an IPv6 peer that is numerically within a configured non-prefix-aligned denied-peer-ip range but is classified as outside it. This issue is fixed in version 4.16.0. |
| Coturn is a free open source implementation of TURN and STUN Server. Prior to 4.16.0, dtls_server_input_handler() and create_new_connected_udp_socket() in src/apps/relay/dtls_listener.c retain OpenSSL dtls1_reassemble_fragment() state for a 35-byte fragmented ClientHello declaring a 650,000-byte handshake before cookie validation, allowing an unauthenticated remote sender using fresh UDP tuples to exhaust memory without TURN credentials, a completed handshake, a valid cookie, or source spoofing. This issue is fixed in version 4.16.0. |
| RustFS is a distributed object storage system built in Rust. Prior to 1.0.0-rc.1, RustFS Object Lock enforcement in crates/ecstore/src/bucket/object_lock/objectlock_sys.rs lets check_object_lock_for_deletion, delete_prefix, and lifecycle and scanner sweeps treat ConfigNotFound, unreadable .metadata.bin data, or unparseable metadata as no lock configuration, allowing objects under COMPLIANCE retention to be deleted or expired. This issue is fixed in version 1.0.0-rc.1. |
| RustFS is a distributed object storage system built in Rust. Prior to 1.0.0-beta.12, RustFS handles FTPS MKD in FtpsDriver::mkd in crates/protocols/src/ftps/driver.rs by calling storage.create_bucket without authorize_operation for S3Action::CreateBucket, allowing authenticated FTPS users denied s3:CreateBucket to create buckets. This issue is fixed in version 1.0.0-beta.12. |
| Vulnerability-Lookup contains a server-side request forgery (SSRF) vulnerability in the remote-instance synchronization functionality. Remote instance addresses were validated only for basic URL syntax before being stored, while the synchronization worker later dereferenced these addresses using requests.get() with automatic redirect handling and without enforcing network-boundary restrictions.
An authenticated administrator with the admin:access permission could configure a remote instance whose address points to an internal, loopback, link-local, or cloud metadata HTTP(S) service. When synchronization is performed, the Vulnerability-Lookup server would issue the request from its own network context. An attacker could also use a publicly accessible URL that redirects to an internal destination, because redirects were previously followed without revalidating the destination.
Successful exploitation could allow a privileged attacker to probe or interact with services that are accessible from the Vulnerability-Lookup server but not directly reachable by the attacker, including private network services or cloud instance metadata endpoints. The exact confidentiality, integrity, or availability impact depends on the services reachable from the application server.
The patch introduces a shared outbound URL policy that restricts remote instances to HTTP(S), rejects non-public IP addresses, resolves hostnames at request time, and manually validates each redirect destination before following it. The implementation explicitly blocks private, loopback, link-local, multicast, reserved, and unspecified addresses. |
| RustFS is a distributed object storage system built in Rust. Prior to 1.0.0-beta.12, RustFS get_condition_values folds attacker-controlled request headers from HeaderMap into server-derived userid, username, principaltype, groups, versionid, signatureversion, jwt:, and ldap: condition keys, allowing authenticated callers to satisfy identity-based policy conditions. This issue is fixed in version 1.0.0-beta.12. |
| RustFS is a distributed object storage system built in Rust. From 1.0.0-alpha.64 until 1.0.0-rc.1, RustFS external OPA authorization enabled by RUSTFS_POLICY_PLUGIN_URL in crates/iam/src/sys.rs sets PreparedIamAuth.needs_existing_object_tag incorrectly for PreparedIamMode::Opa, causing maybe_merge_object_tag_conditions to omit s3:ExistingObjectTag/* values and allowing authenticated users to bypass tag-based policy restrictions. This issue is fixed in version 1.0.0-rc.1. |
| RustFS is a distributed object storage system built in Rust. RustFS AddServiceAccount in rustfs/src/admin/handlers/service_account.rs accepts an attacker-controlled target_user after only checking CreateServiceAccountAdminAction, passes it to new_service_account, and prepare_service_account_auth sets is_owner for the resulting root-parent service account. This issue is fixed in version 1.0.0-beta.11. |
| RustFS is a distributed object storage system built in Rust. RustFS authorizes explicit versionId reads in GetObject, CopyObject sources, and UploadPartCopy sources with s3:GetObject instead of s3:GetObjectVersion, allowing principals without historical-version permission to disclose known historical object content. This issue is fixed in version 1.0.0-beta.11. |
| Vulnerability-Lookup contains an
authentication weakness in its account activation and password-recovery
mechanism. Activation and recovery links were generated using stateless
signed tokens containing only the user's login. Although the token
signature and age were validated, the application did not track whether a
token had already been successfully used. As a result, a captured
activation or password-recovery link remained valid for the entire
configured TOKEN_VALIDITY_PERIOD, even after the associated password had been changed.
An attacker who obtains a valid
activation or recovery token could therefore replay it multiple times
during its validity period to set a new password and repeatedly take
control of the affected account. In addition, tokens were not bound to a
specific purpose, allowing the same token mechanism to be used across
activation and recovery workflows. The patch introduces purpose-bound
tokens and a random nonce whose SHA-256 digest is stored with the user
account. The nonce is invalidated after a successful password change,
making tokens single-use, while issuing a new token invalidates any
previously issued token. The password-setting operation now explicitly consumes the token before committing the account change.
Successful exploitation requires
the attacker to obtain a currently valid activation or recovery link,
but does not require knowledge of the victim's existing password or an
authenticated session. |
| Prowler is a cloud security platform. Prior to 5.33.1, an authenticated user with Lighthouse provider configuration access could supply an unvalidated base_url for the openai_compatible provider through POST /api/v1/lighthouse/providers and POST /api/v1/lighthouse/providers/{id}/connection, causing api/src/backend/tasks/jobs/lighthouse_providers.py to send outbound requests, including the API key in the Authorization header, to attacker-controlled or internal endpoints when client.models.list was called. This issue is fixed in version 5.33.1. |
