| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the wireless controller manager of Cisco IOS XE could allow an unauthenticated, adjacent attacker to cause a restart of the switch and result in a denial of service (DoS) condition. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by submitting a crafted association request. An exploit could allow the attacker to cause the switch to restart. This vulnerability affects Cisco Catalyst 3650 and 3850 switches running IOS XE Software versions 16.1 through 16.3.3, and acting as wireless LAN controllers (WLC). Cisco Bug IDs: CSCvd45069. |
| A vulnerability in the dynamic access control list (ACL) feature of Cisco IOS XE Software running on Cisco Catalyst 4000 Series Switches could allow an unauthenticated, adjacent attacker to cause dynamic ACL assignment to fail and the port to fail open. This could allow the attacker to pass traffic to the default VLAN of the affected port. The vulnerability is due to an uncaught error condition that may occur during the reassignment of the auth-default-ACL dynamic ACL to a switch port after 802.1x authentication fails. A successful exploit of this issue could allow a physically adjacent attacker to bypass 802.1x authentication and cause the affected port to fail open, allowing the attacker to pass traffic to the default VLAN of the affected switch port. Cisco Bug IDs: CSCvc72751. |
| A vulnerability in the web-based Wireless Controller GUI of Cisco IOS XE Software for Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, and Cisco New Generation Wireless Controllers (NGWC) 3850 could allow an authenticated, remote attacker to elevate their privileges on an affected device. The vulnerability is due to incomplete input validation of HTTP requests by the affected GUI, if the GUI connection state or protocol changes. An attacker could exploit this vulnerability by authenticating to the Wireless Controller GUI as a Lobby Administrator user of an affected device and subsequently changing the state or protocol for their connection to the GUI. A successful exploit could allow the attacker to elevate their privilege level to administrator and gain full control of the affected device. This vulnerability affects the following Cisco products if they are running Cisco IOS XE Software Release 3.7.0E, 3.7.1E, 3.7.2E, 3.7.3E, 3.7.4E, or 3.7.5E: Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, Cisco New Generation Wireless Controllers (NGWC) 3850. Cisco Bug IDs: CSCvd73746. |
| A vulnerability in the Local Packet Transport Services (LPTS) ingress frame-processing functionality of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause one of the LPTS processes on an affected system to restart unexpectedly, resulting in a brief denial of service (DoS) condition. The vulnerability is due to incomplete LPTS frame validation by the affected software. An attacker could exploit this vulnerability by sending crafted XML requests to the management interface of an affected system. A successful exploit could allow the attacker to cause one of the LPTS processes on the affected system to restart unexpectedly, which would impact LPTS traffic and cause a brief DoS condition while the process restarts. Cisco Bug IDs: CSCvf76332. |
| A vulnerability in the IPv6 Simple Network Management Protocol (SNMP) code of Cisco IOS and Cisco IOS XE Software could allow an authenticated, remote attacker to cause high CPU usage or a reload of the device. The vulnerability is due to IPv6 sub block corruption. An attacker could exploit this vulnerability by polling the affected device IPv6 information. An exploit could allow the attacker to trigger high CPU usage or a reload of the device. Known Affected Releases: Denali-16.3.1. Cisco Bug IDs: CSCvb14640. |
| A vulnerability in the implementation of the Locator/ID Separation Protocol (LISP) in Cisco IOS XE 3.2 through 16.5 could allow an unauthenticated, remote attacker using an x tunnel router to bypass authentication checks performed when registering an Endpoint Identifier (EID) to a Routing Locator (RLOC) in the map server/map resolver (MS/MR). The vulnerability is due to a logic error introduced via a code regression for the affected software. An attacker could exploit this vulnerability by sending specific valid map-registration requests, which will be accepted by the MS/MR even if the authentication keys do not match, to the affected software. A successful exploit could allow the attacker to inject invalid mappings of EIDs to RLOCs in the MS/MR of the affected software. This vulnerability affects Cisco devices that are configured with LISP acting as an IPv4 or IPv6 map server. This vulnerability affects Cisco IOS XE Software release trains 3.9E and Everest 16.4. Cisco Bug IDs: CSCvc18008. |
| A vulnerability in the IOS daemon (IOSd) web-based management interface of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the web-based management interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvf60862. |
| A vulnerability in the REST API of the web-based user interface (web UI) of Cisco IOS XE 3.1 through 16.5 could allow an unauthenticated, remote attacker to bypass authentication to the REST API of the web UI of the affected software. The vulnerability is due to insufficient input validation for the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious API request to an affected device. A successful exploit could allow the attacker to bypass authentication and gain access to the web UI of the affected software. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuz46036. |
| A vulnerability in Google-defined remote procedure call (gRPC) handling in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause the Event Management Service daemon (emsd) to crash due to a system memory leak, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco IOS XR Software with gRPC enabled. More Information: CSCvb14433. Known Affected Releases: 6.1.1.BASE 6.2.1.BASE. Known Fixed Releases: 6.2.1.22i.MGBL 6.1.22.9i.MGBL 6.1.21.12i.MGBL 6.1.2.13i.MGBL. |
| A vulnerability in conditional, verbose debug logging for the IPsec feature of Cisco IOS XE Software could allow an authenticated, local attacker to display sensitive IPsec information in the system log file. The vulnerability is due to incorrect implementation of IPsec conditional, verbose debug logging that causes sensitive information to be written to the log file. This information should be restricted. An attacker who has valid administrative credentials could exploit this vulnerability by authenticating to the device and enabling conditional, verbose debug logging for IPsec and viewing the log file. An exploit could allow the attacker to access sensitive information related to the IPsec configuration. Cisco Bug IDs: CSCvf12081. |
| A vulnerability in the gRPC code of Cisco IOS XR Software for Cisco Network Convergence System (NCS) 5500 Series Routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition when the emsd service stops. The vulnerability is due to the software's inability to process HTTP/2 packets. An attacker could exploit this vulnerability by sending a malformed HTTP/2 frame to the affected device. A successful exploit could allow the attacker to create a DoS condition when the emsd service stops. Cisco Bug IDs: CSCvb99388. |
| A vulnerability in the web framework code of Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web interface of the affected software. The vulnerability is due to insufficient input validation of some parameters that are passed to the web server of the affected software. An attacker could exploit this vulnerability by convincing a user of the web interface to access a malicious link or by intercepting a user request for the affected web interface and injecting malicious code into the request. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected web interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvb09516. |
| Cisco IOS 12.0 through 15.6, Adaptive Security Appliance (ASA) Software 7.0.1 through 9.7.1.2, NX-OS 4.0 through 12.0, and IOS XE 3.6 through 3.18 are affected by a vulnerability involving the Open Shortest Path First (OSPF) Routing Protocol Link State Advertisement (LSA) database. This vulnerability could allow an unauthenticated, remote attacker to take full control of the OSPF Autonomous System (AS) domain routing table, allowing the attacker to intercept or black-hole traffic. The attacker could exploit this vulnerability by injecting crafted OSPF packets. Successful exploitation could cause the targeted router to flush its routing table and propagate the crafted OSPF LSA type 1 update throughout the OSPF AS domain. To exploit this vulnerability, an attacker must accurately determine certain parameters within the LSA database on the target router. This vulnerability can only be triggered by sending crafted unicast or multicast OSPF LSA type 1 packets. No other LSA type packets can trigger this vulnerability. OSPFv3 is not affected by this vulnerability. Fabric Shortest Path First (FSPF) protocol is not affected by this vulnerability. Cisco Bug IDs: CSCva74756, CSCve47393, CSCve47401. |
| A vulnerability in the Autonomic Networking feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to reset the Autonomic Control Plane (ACP) of an affected system and view ACP packets that are transferred in clear text within an affected system, an Information Disclosure Vulnerability. More Information: CSCvd51214. Known Affected Releases: Denali-16.2.1 Denali-16.3.1. |
| A vulnerability in Simple Network Management Protocol (SNMP) functions of Cisco ASR 1000 Series Aggregation Services Routers running Cisco IOS XE Software Release 3.13.6S, 3.16.2S, or 3.17.1S could allow an authenticated, remote attacker to cause high CPU usage on an affected device, resulting in a denial of service (DoS) condition. More Information: CSCux68796. Known Affected Releases: 15.5(3)S2.1 15.6(1)S1.1. Known Fixed Releases: 15.4(3)S6.1 15.4(3)S6.2 15.5(3)S2.2 15.5(3)S3 15.6(0.22)S0.23 15.6(1)S2 16.2(0.295) 16.3(0.94) 15.5.3S3. |
| Cisco IOS before 15.2(4)S6 does not initialize an unspecified variable, which might allow remote authenticated users to cause a denial of service (CPU consumption, watchdog timeout, crash) by walking specific SNMP objects. |
| Cisco IOS before 12.2(33)SXI allows remote authenticated users to cause a denial of service (device reboot). |
| A vulnerability in the Cisco Network Plug and Play application of Cisco IOS 12.4 through 15.6 and Cisco IOS XE 3.3 through 16.4 could allow an unauthenticated, remote attacker to gain unauthorized access to sensitive data by using an invalid certificate. The vulnerability is due to insufficient certificate validation by the affected software. An attacker could exploit this vulnerability by supplying a crafted certificate to an affected device. A successful exploit could allow the attacker to conduct man-in-the-middle attacks to decrypt confidential information on user connections to the affected software. Cisco Bug IDs: CSCvc33171. |
| A vulnerability in motherboard console ports of line cards for Cisco ASR 1000 Series Aggregation Services Routers and Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, physical attacker to access an affected device's operating system. The vulnerability exists because an engineering console port is available on the motherboard of the affected line cards. An attacker could exploit this vulnerability by physically connecting to the console port on the line card. A successful exploit could allow the attacker to gain full access to the affected device's operating system. This vulnerability affects only Cisco ASR 1000 Series Routers that have removable line cards and Cisco cBR-8 Converged Broadband Routers, if they are running certain Cisco IOS XE 3.16 through 16.5 releases. Cisco Bug IDs: CSCvc65866, CSCve77132. |
| Cisco IOS before 12.2(33)SXI allows local users to cause a denial of service (device reboot). |
