| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
inet: RAW sockets using IPPROTO_RAW MUST drop incoming ICMP
Yizhou Zhao reported that simply having one RAW socket on protocol
IPPROTO_RAW (255) was dangerous.
socket(AF_INET, SOCK_RAW, 255);
A malicious incoming ICMP packet can set the protocol field to 255
and match this socket, leading to FNHE cache changes.
inner = IP(src="192.168.2.1", dst="8.8.8.8", proto=255)/Raw("TEST")
pkt = IP(src="192.168.1.1", dst="192.168.2.1")/ICMP(type=3, code=4, nexthopmtu=576)/inner
"man 7 raw" states:
A protocol of IPPROTO_RAW implies enabled IP_HDRINCL and is able
to send any IP protocol that is specified in the passed header.
Receiving of all IP protocols via IPPROTO_RAW is not possible
using raw sockets.
Make sure we drop these malicious packets. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix WQ_MEM_RECLAIM warning
When sunrpc is used, if a reset triggered, our wq may lead the
following trace:
workqueue: WQ_MEM_RECLAIM xprtiod:xprt_rdma_connect_worker [rpcrdma]
is flushing !WQ_MEM_RECLAIM hns_roce_irq_workq:flush_work_handle
[hns_roce_hw_v2]
WARNING: CPU: 0 PID: 8250 at kernel/workqueue.c:2644 check_flush_dependency+0xe0/0x144
Call trace:
check_flush_dependency+0xe0/0x144
start_flush_work.constprop.0+0x1d0/0x2f0
__flush_work.isra.0+0x40/0xb0
flush_work+0x14/0x30
hns_roce_v2_destroy_qp+0xac/0x1e0 [hns_roce_hw_v2]
ib_destroy_qp_user+0x9c/0x2b4
rdma_destroy_qp+0x34/0xb0
rpcrdma_ep_destroy+0x28/0xcc [rpcrdma]
rpcrdma_ep_put+0x74/0xb4 [rpcrdma]
rpcrdma_xprt_disconnect+0x1d8/0x260 [rpcrdma]
xprt_rdma_connect_worker+0xc0/0x120 [rpcrdma]
process_one_work+0x1cc/0x4d0
worker_thread+0x154/0x414
kthread+0x104/0x144
ret_from_fork+0x10/0x18
Since QP destruction frees memory, this wq should have the WQ_MEM_RECLAIM. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pf: Fix sysfs initialization
In case of devm_add_action_or_reset() failure the provided cleanup
action will be run immediately on the not yet initialized kobject.
This may lead to errors like:
[ ] kobject: '(null)' (ff110001393608e0): is not initialized, yet kobject_put() is being called.
[ ] WARNING: lib/kobject.c:734 at kobject_put+0xd9/0x250, CPU#0: kworker/0:0/9
[ ] RIP: 0010:kobject_put+0xdf/0x250
[ ] Call Trace:
[ ] xe_sriov_pf_sysfs_init+0x21/0x100 [xe]
[ ] xe_sriov_pf_init_late+0x87/0x2b0 [xe]
[ ] xe_sriov_init_late+0x5f/0x2c0 [xe]
[ ] xe_device_probe+0x5f2/0xc20 [xe]
[ ] xe_pci_probe+0x396/0x610 [xe]
[ ] local_pci_probe+0x47/0xb0
[ ] refcount_t: underflow; use-after-free.
[ ] WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x68/0xb0, CPU#0: kworker/0:0/9
[ ] RIP: 0010:refcount_warn_saturate+0x68/0xb0
[ ] Call Trace:
[ ] kobject_put+0x174/0x250
[ ] xe_sriov_pf_sysfs_init+0x21/0x100 [xe]
[ ] xe_sriov_pf_init_late+0x87/0x2b0 [xe]
[ ] xe_sriov_init_late+0x5f/0x2c0 [xe]
[ ] xe_device_probe+0x5f2/0xc20 [xe]
[ ] xe_pci_probe+0x396/0x610 [xe]
[ ] local_pci_probe+0x47/0xb0
Fix that by calling kobject_init() and kobject_add() separately
and register cleanup action after the kobject is initialized.
Also make this cleanup registration a part of the create helper to
fix another mistake, as in the loop we were wrongly passing parent
kobject while registering cleanup action, and this resulted in some
undetected leaks.
(cherry picked from commit 98b16727f07e26a5d4de84d88805ce7ffcfdd324) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix out-of-bounds stream encoder index v3
eng_id can be negative and that stream_enc_regs[]
can be indexed out of bounds.
eng_id is used directly as an index into stream_enc_regs[], which has
only 5 entries. When eng_id is 5 (ENGINE_ID_DIGF) or negative, this can
access memory past the end of the array.
Add a bounds check using ARRAY_SIZE() before using eng_id as an index.
The unsigned cast also rejects negative values.
This avoids out-of-bounds access.
Fixes the below smatch error:
dcn*_resource.c: stream_encoder_create() may index
stream_enc_regs[eng_id] out of bounds (size 5).
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn351/dcn351_resource.c
1246 static struct stream_encoder *dcn35_stream_encoder_create(
1247 enum engine_id eng_id,
1248 struct dc_context *ctx)
1249 {
...
1255
1256 /* Mapping of VPG, AFMT, DME register blocks to DIO block instance */
1257 if (eng_id <= ENGINE_ID_DIGF) {
ENGINE_ID_DIGF is 5. should <= be <?
Unrelated but, ugh, why is Smatch saying that "eng_id" can be negative?
end_id is type signed long, but there are checks in the caller which prevent it from being negative.
1258 vpg_inst = eng_id;
1259 afmt_inst = eng_id;
1260 } else
1261 return NULL;
1262
...
1281
1282 dcn35_dio_stream_encoder_construct(enc1, ctx, ctx->dc_bios,
1283 eng_id, vpg, afmt,
--> 1284 &stream_enc_regs[eng_id],
^^^^^^^^^^^^^^^^^^^^^^^ This stream_enc_regs[] array has 5 elements so we are one element beyond the end of the array.
...
1287 return &enc1->base;
1288 }
v2: use explicit bounds check as suggested by Roman/Dan; avoid unsigned int cast
v3: The compiler already knows how to compare the two values, so the
cast (int) is not needed. (Roman) |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: fsl_xcvr: Revert fix missing lock in fsl_xcvr_mode_put()
This reverts commit f51424872760 ("ASoC: fsl_xcvr: fix missing lock in fsl_xcvr_mode_put()").
The original patch attempted to acquire the card->controls_rwsem lock in
fsl_xcvr_mode_put(). However, this function is called from the upper ALSA
core function snd_ctl_elem_write(), which already holds the write lock on
controls_rwsem for the whole put operation. So there is no need to simply
hold the lock for fsl_xcvr_activate_ctl() again.
Acquiring the read lock while holding the write lock in the same thread
results in a deadlock and a hung task, as reported by Alexander Stein. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: wpcm-fiu: Fix potential NULL pointer dereference in wpcm_fiu_probe()
platform_get_resource_byname() can return NULL, which would cause a crash
when passed the pointer to resource_size().
Move the fiu->memory_size assignment after the error check for
devm_ioremap_resource() to prevent the potential NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix out-of-bound access in fib6_add_rt2node().
syzbot reported out-of-bound read in fib6_add_rt2node(). [0]
When IPv6 route is created with RTA_NH_ID, struct fib6_info
does not have the trailing struct fib6_nh.
The cited commit started to check !iter->fib6_nh->fib_nh_gw_family
to ensure that rt6_qualify_for_ecmp() will return false for iter.
If iter->nh is not NULL, rt6_qualify_for_ecmp() returns false anyway.
Let's check iter->nh before reading iter->fib6_nh and avoid OOB read.
[0]:
BUG: KASAN: slab-out-of-bounds in fib6_add_rt2node+0x349c/0x3500 net/ipv6/ip6_fib.c:1142
Read of size 1 at addr ffff8880384ba6de by task syz.0.18/5500
CPU: 0 UID: 0 PID: 5500 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xba/0x230 mm/kasan/report.c:482
kasan_report+0x117/0x150 mm/kasan/report.c:595
fib6_add_rt2node+0x349c/0x3500 net/ipv6/ip6_fib.c:1142
fib6_add_rt2node_nh net/ipv6/ip6_fib.c:1363 [inline]
fib6_add+0x910/0x18c0 net/ipv6/ip6_fib.c:1531
__ip6_ins_rt net/ipv6/route.c:1351 [inline]
ip6_route_add+0xde/0x1b0 net/ipv6/route.c:3957
inet6_rtm_newroute+0x268/0x19e0 net/ipv6/route.c:5660
rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa68/0xad0 net/socket.c:2592
___sys_sendmsg+0x2a5/0x360 net/socket.c:2646
__sys_sendmsg net/socket.c:2678 [inline]
__do_sys_sendmsg net/socket.c:2683 [inline]
__se_sys_sendmsg net/socket.c:2681 [inline]
__x64_sys_sendmsg+0x1bd/0x2a0 net/socket.c:2681
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f9316b9aeb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd8809b678 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f9316e15fa0 RCX: 00007f9316b9aeb9
RDX: 0000000000000000 RSI: 0000200000004380 RDI: 0000000000000003
RBP: 00007f9316c08c1f R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f9316e15fac R14: 00007f9316e15fa0 R15: 00007f9316e15fa0
</TASK>
Allocated by task 5499:
kasan_save_stack mm/kasan/common.c:57 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__do_kmalloc_node mm/slub.c:5657 [inline]
__kmalloc_noprof+0x40c/0x7e0 mm/slub.c:5669
kmalloc_noprof include/linux/slab.h:961 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
fib6_info_alloc+0x30/0xf0 net/ipv6/ip6_fib.c:155
ip6_route_info_create+0x142/0x860 net/ipv6/route.c:3820
ip6_route_add+0x49/0x1b0 net/ipv6/route.c:3949
inet6_rtm_newroute+0x268/0x19e0 net/ipv6/route.c:5660
rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa68/0xad0 net/socket.c:2592
___sys_s
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
When reading /proc/[pid]/stat, do_task_stat() accesses task->real_parent
without proper RCU protection, which leads to:
cpu 0 cpu 1
----- -----
do_task_stat
var = task->real_parent
release_task
call_rcu(delayed_put_task_struct)
task_tgid_nr_ns(var)
rcu_read_lock <--- Too late to protect task->real_parent!
task_pid_ptr <--- UAF!
rcu_read_unlock
This patch uses task_ppid_nr_ns() instead of task_tgid_nr_ns() to add
proper RCU protection for accessing task->real_parent. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: cdev: Avoid NULL dereference in linehandle_create()
In linehandle_create(), there is a statement like this:
retain_and_null_ptr(lh);
Soon after, there is a debug printout that dereferences "lh", which
will crash things.
Avoid the crash by using handlereq.lines, which is the same value. |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/timer-sp804: Fix an Oops when read_current_timer is called on ARM32 platforms where the SP804 is not registered as the sched_clock.
On SP804, the delay timer shares the same clkevt instance with
sched_clock. On some platforms, when
sp804_clocksource_and_sched_clock_init is called with use_sched_clock
not set to 1, sched_clkevt is not properly initialized. However,
sp804_register_delay_timer is invoked unconditionally, and
read_current_timer() subsequently calls sp804_read on an uninitialized
sched_clkevt, leading to a kernel Oops when accessing
sched_clkevt->value.
Declare a dedicated clkevt instance exclusively for delay timer,
instead of sharing the same clkevt with sched_clock. This ensures
that read_current_timer continues to work correctly regardless of
whether SP804 is selected as the sched_clock. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS/localio: prevent direct reclaim recursion into NFS via nfs_writepages
LOCALIO is an NFS loopback mount optimization that avoids using the
network for READ, WRITE and COMMIT if the NFS client and server are
determined to be on the same system. But because LOCALIO is still
fundamentally "just NFS loopback mount" it is susceptible to recursion
deadlock via direct reclaim, e.g.: NFS LOCALIO down to XFS and then
back into NFS via nfs_writepages.
Fix LOCALIO's potential for direct reclaim deadlock by ensuring that
all its page cache allocations are done from GFP_NOFS context.
Thanks to Ben Coddington for pointing out commit ad22c7a043c2 ("xfs:
prevent stack overflows from page cache allocation"). |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: fsl-edma: don't explicitly disable clocks in .remove()
The clocks in fsl_edma_engine::muxclk are allocated and enabled with
devm_clk_get_enabled(), which automatically cleans these resources up,
but these clocks are also manually disabled in fsl_edma_remove(). This
causes warnings on driver removal for each clock:
edma_module already disabled
WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1200 clk_core_disable+0x198/0x1c8
[...]
Call trace:
clk_core_disable+0x198/0x1c8 (P)
clk_disable+0x34/0x58
fsl_edma_remove+0x74/0xe8 [fsl_edma]
[...]
---[ end trace 0000000000000000 ]---
edma_module already unprepared
WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1059 clk_core_unprepare+0x1f8/0x220
[...]
Call trace:
clk_core_unprepare+0x1f8/0x220 (P)
clk_unprepare+0x34/0x58
fsl_edma_remove+0x7c/0xe8 [fsl_edma]
[...]
---[ end trace 0000000000000000 ]---
Fix these warnings by removing the unnecessary fsl_disable_clocks() call
in fsl_edma_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
AppArmor: Allow apparmor to handle unaligned dfa tables
The dfa tables can originate from kernel or userspace and 8-byte alignment
isn't always guaranteed and as such may trigger unaligned memory accesses
on various architectures. Resulting in the following
[ 73.901376] WARNING: CPU: 0 PID: 341 at security/apparmor/match.c:316 aa_dfa_unpack+0x6cc/0x720
[ 74.015867] Modules linked in: binfmt_misc evdev flash sg drm drm_panel_orientation_quirks backlight i2c_core configfs nfnetlink autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid sr_mod hid cdrom
sd_mod ata_generic ohci_pci ehci_pci ehci_hcd ohci_hcd pata_ali libata sym53c8xx scsi_transport_spi tg3 scsi_mod usbcore libphy scsi_common mdio_bus usb_common
[ 74.428977] CPU: 0 UID: 0 PID: 341 Comm: apparmor_parser Not tainted 6.18.0-rc6+ #9 NONE
[ 74.536543] Call Trace:
[ 74.568561] [<0000000000434c24>] dump_stack+0x8/0x18
[ 74.633757] [<0000000000476438>] __warn+0xd8/0x100
[ 74.696664] [<00000000004296d4>] warn_slowpath_fmt+0x34/0x74
[ 74.771006] [<00000000008db28c>] aa_dfa_unpack+0x6cc/0x720
[ 74.843062] [<00000000008e643c>] unpack_pdb+0xbc/0x7e0
[ 74.910545] [<00000000008e7740>] unpack_profile+0xbe0/0x1300
[ 74.984888] [<00000000008e82e0>] aa_unpack+0xe0/0x6a0
[ 75.051226] [<00000000008e3ec4>] aa_replace_profiles+0x64/0x1160
[ 75.130144] [<00000000008d4d90>] policy_update+0xf0/0x280
[ 75.201057] [<00000000008d4fc8>] profile_replace+0xa8/0x100
[ 75.274258] [<0000000000766bd0>] vfs_write+0x90/0x420
[ 75.340594] [<00000000007670cc>] ksys_write+0x4c/0xe0
[ 75.406932] [<0000000000767174>] sys_write+0x14/0x40
[ 75.472126] [<0000000000406174>] linux_sparc_syscall+0x34/0x44
[ 75.548802] ---[ end trace 0000000000000000 ]---
[ 75.609503] dfa blob stream 0xfff0000008926b96 not aligned.
[ 75.682695] Kernel unaligned access at TPC[8db2a8] aa_dfa_unpack+0x6e8/0x720
Work around it by using the get_unaligned_xx() helpers. |
| In the Linux kernel, the following vulnerability has been resolved:
pstore/ram: fix buffer overflow in persistent_ram_save_old()
persistent_ram_save_old() can be called multiple times for the same
persistent_ram_zone (e.g., via ramoops_pstore_read -> ramoops_get_next_prz
for PSTORE_TYPE_DMESG records).
Currently, the function only allocates prz->old_log when it is NULL,
but it unconditionally updates prz->old_log_size to the current buffer
size and then performs memcpy_fromio() using this new size. If the
buffer size has grown since the first allocation (which can happen
across different kernel boot cycles), this leads to:
1. A heap buffer overflow (OOB write) in the memcpy_fromio() calls
2. A subsequent OOB read when ramoops_pstore_read() accesses the buffer
using the incorrect (larger) old_log_size
The KASAN splat would look similar to:
BUG: KASAN: slab-out-of-bounds in ramoops_pstore_read+0x...
Read of size N at addr ... by task ...
The conditions are likely extremely hard to hit:
0. Crash with a ramoops write of less-than-record-max-size bytes.
1. Reboot: ramoops registers, pstore_get_records(0) reads old crash,
allocates old_log with size X
2. Crash handler registered, timer started (if pstore_update_ms >= 0)
3. Oops happens (non-fatal, system continues)
4. pstore_dump() writes oops via ramoops_pstore_write() size Y (>X)
5. pstore_new_entry = 1, pstore_timer_kick() called
6. System continues running (not a panic oops)
7. Timer fires after pstore_update_ms milliseconds
8. pstore_timefunc() → schedule_work() → pstore_dowork() → pstore_get_records(1)
9. ramoops_get_next_prz() → persistent_ram_save_old()
10. buffer_size() returns Y, but old_log is X bytes
11. Y > X: memcpy_fromio() overflows heap
Requirements:
- a prior crash record exists that did not fill the record size
(almost impossible since the crash handler writes as much as it
can possibly fit into the record, capped by max record size and
the kmsg buffer almost always exceeds the max record size)
- pstore_update_ms >= 0 (disabled by default)
- Non-fatal oops (system survives)
Free and reallocate the buffer when the new size differs from the
previously allocated size. This ensures old_log always has sufficient
space for the data being copied. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: core: fix locking in regulator_resolve_supply() error path
If late enabling of a supply regulator fails in
regulator_resolve_supply(), the code currently triggers a lockdep
warning:
WARNING: drivers/regulator/core.c:2649 at _regulator_put+0x80/0xa0, CPU#6: kworker/u32:4/596
...
Call trace:
_regulator_put+0x80/0xa0 (P)
regulator_resolve_supply+0x7cc/0xbe0
regulator_register_resolve_supply+0x28/0xb8
as the regulator_list_mutex must be held when calling _regulator_put().
To solve this, simply switch to using regulator_put().
While at it, we should also make sure that no concurrent access happens
to our rdev while we clear out the supply pointer. Add appropriate
locking to ensure that.
While the code in question will be removed altogether in a follow-up
commit, I believe it is still beneficial to have this corrected before
removal for future reference. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix block_group_tree dirty_list corruption
When the incompat flag EXTENT_TREE_V2 is set, we unconditionally add the
block group tree to the switch_commits list before calling
switch_commit_roots, as we do for the tree root and the chunk root.
However, the block group tree uses normal root dirty tracking and in any
transaction that does an allocation and dirties a block group, the block
group root will already be linked to a list by the dirty_list field and
this use of list_add_tail() is invalid and corrupts the prev/next
members of block_group_root->dirty_list.
This is apparent on a subsequent list_del on the prev if we enable
CONFIG_DEBUG_LIST:
[32.1571] ------------[ cut here ]------------
[32.1572] list_del corruption. next->prev should beffff958890202538, but was ffff9588992bd538. (next=ffff958890201538)
[32.1575] WARNING: lib/list_debug.c:65 at 0x0, CPU#3: sync/607
[32.1583] CPU: 3 UID: 0 PID: 607 Comm: sync Not tainted 6.18.0 #24PREEMPT(none)
[32.1585] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS1.17.0-4.fc41 04/01/2014
[32.1587] RIP: 0010:__list_del_entry_valid_or_report+0x108/0x120
[32.1593] RSP: 0018:ffffaa288287fdd0 EFLAGS: 00010202
[32.1594] RAX: 0000000000000001 RBX: ffff95889326e800 RCX:ffff958890201538
[32.1596] RDX: ffff9588992bd538 RSI: ffff958890202538 RDI:ffffffff82a41e00
[32.1597] RBP: ffff958890202538 R08: ffffffff828fc1e8 R09:00000000ffffefff
[32.1599] R10: ffffffff8288c200 R11: ffffffff828e4200 R12:ffff958890201538
[32.1601] R13: ffff95889326e958 R14: ffff958895c24000 R15:ffff958890202538
[32.1603] FS: 00007f0c28eb5740(0000) GS:ffff958af2bd2000(0000)knlGS:0000000000000000
[32.1605] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[32.1607] CR2: 00007f0c28e8a3cc CR3: 0000000109942005 CR4:0000000000370ef0
[32.1609] Call Trace:
[32.1610] <TASK>
[32.1611] switch_commit_roots+0x82/0x1d0 [btrfs]
[32.1615] btrfs_commit_transaction+0x968/0x1550 [btrfs]
[32.1618] ? btrfs_attach_transaction_barrier+0x23/0x60 [btrfs]
[32.1621] __iterate_supers+0xe8/0x190
[32.1622] ? __pfx_sync_fs_one_sb+0x10/0x10
[32.1623] ksys_sync+0x63/0xb0
[32.1624] __do_sys_sync+0xe/0x20
[32.1625] do_syscall_64+0x73/0x450
[32.1626] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[32.1627] RIP: 0033:0x7f0c28d05d2b
[32.1632] RSP: 002b:00007ffc9d988048 EFLAGS: 00000246 ORIG_RAX:00000000000000a2
[32.1634] RAX: ffffffffffffffda RBX: 00007ffc9d988228 RCX:00007f0c28d05d2b
[32.1636] RDX: 00007f0c28e02301 RSI: 00007ffc9d989b21 RDI:00007f0c28dba90d
[32.1637] RBP: 0000000000000001 R08: 0000000000000001 R09:0000000000000000
[32.1639] R10: 0000000000000000 R11: 0000000000000246 R12:000055b96572cb80
[32.1641] R13: 000055b96572b19f R14: 00007f0c28dfa434 R15:000055b96572b034
[32.1643] </TASK>
[32.1644] irq event stamp: 0
[32.1644] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[32.1646] hardirqs last disabled at (0): [<ffffffff81298817>]copy_process+0xb37/0x2260
[32.1648] softirqs last enabled at (0): [<ffffffff81298817>]copy_process+0xb37/0x2260
[32.1650] softirqs last disabled at (0): [<0000000000000000>] 0x0
[32.1652] ---[ end trace 0000000000000000 ]---
Furthermore, this list corruption eventually (when we happen to add a
new block group) results in getting the switch_commits and
dirty_cowonly_roots lists mixed up and attempting to call update_root
on the tree root which can't be found in the tree root, resulting in a
transaction abort:
[87.8269] BTRFS critical (device nvme1n1): unable to find root key (1 0 0) in tree 1
[87.8272] ------------[ cut here ]------------
[87.8274] BTRFS: Transaction aborted (error -117)
[87.8275] WARNING: fs/btrfs/root-tree.c:153 at 0x0, CPU#4: sync/703
[87.8285] CPU: 4 UID: 0 PID: 703 Comm: sync Not tainted 6.18.0 #25 PREEMPT(none)
[87.8287] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-4.fc41 0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: Work around LLVM bug when gp is used as global register variable
On MIPS, __current_thread_info is defined as global register variable
locating in $gp, and is simply assigned with new address during kernel
relocation.
This however is broken with LLVM, which always restores $gp if it finds
$gp is clobbered in any form, including when intentionally through a
global register variable. This is against GCC's documentation[1], which
requires a callee-saved register used as global register variable not to
be restored if it's clobbered.
As a result, $gp will continue to point to the unrelocated kernel after
the epilog of relocate_kernel(), leading to an early crash in init_idle,
[ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000000000000000, epc == ffffffff81afada8, ra == ffffffff81afad90
[ 0.000000] Oops[#1]:
[ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Tainted: G W 6.19.0-rc5-00262-gd3eeb99bbc99-dirty #188 VOLUNTARY
[ 0.000000] Tainted: [W]=WARN
[ 0.000000] Hardware name: loongson,loongson64v-4core-virtio
[ 0.000000] $ 0 : 0000000000000000 0000000000000000 0000000000000001 0000000000000000
[ 0.000000] $ 4 : ffffffff80b80ec0 ffffffff80b53d48 0000000000000000 00000000000f4240
[ 0.000000] $ 8 : 0000000000000100 ffffffff81d82f80 ffffffff81d82f80 0000000000000001
[ 0.000000] $12 : 0000000000000000 ffffffff81776f58 00000000000005da 0000000000000002
[ 0.000000] $16 : ffffffff80b80e40 0000000000000000 ffffffff80b81614 9800000005dfbe80
[ 0.000000] $20 : 00000000540000e0 ffffffff81980000 0000000000000000 ffffffff80f81c80
[ 0.000000] $24 : 0000000000000a26 ffffffff8114fb90
[ 0.000000] $28 : ffffffff80b50000 ffffffff80b53d40 0000000000000000 ffffffff81afad90
[ 0.000000] Hi : 0000000000000000
[ 0.000000] Lo : 0000000000000000
[ 0.000000] epc : ffffffff81afada8 init_idle+0x130/0x270
[ 0.000000] ra : ffffffff81afad90 init_idle+0x118/0x270
[ 0.000000] Status: 540000e2 KX SX UX KERNEL EXL
[ 0.000000] Cause : 00000008 (ExcCode 02)
[ 0.000000] BadVA : 0000000000000000
[ 0.000000] PrId : 00006305 (ICT Loongson-3)
[ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
[ 0.000000] Stack : 9800000005dfbf00 ffffffff8178e950 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 ffffffff81970000 000000000000003f ffffffff810a6528
[ 0.000000] 0000000000000001 9800000005dfbe80 9800000005dfbf00 ffffffff81980000
[ 0.000000] ffffffff810a6450 ffffffff81afb6c0 0000000000000000 ffffffff810a2258
[ 0.000000] ffffffff81d82ec8 ffffffff8198d010 ffffffff81b67e80 ffffffff8197dd98
[ 0.000000] ffffffff81d81c80 ffffffff81930000 0000000000000040 0000000000000000
[ 0.000000] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 000000000000009e ffffffff9fc01000 0000000000000000
[ 0.000000] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 ffffffff81ae86dc ffffffff81b3c741 0000000000000002
[ 0.000000] ...
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff81afada8>] init_idle+0x130/0x270
[ 0.000000] [<ffffffff81afb6c0>] sched_init+0x5c8/0x6c0
[ 0.000000] [<ffffffff81ae86dc>] start_kernel+0x27c/0x7a8
This bug has been reported to LLVM[2] and affects version from (at
least) 18 to 21. Let's work around this by using inline assembly to
assign $gp before a fix is widely available. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Fix PF driver crash with kexec kernel booting
During a kexec reboot the hardware is not power-cycled, so AF state from
the old kernel can persist into the new kernel. When AF and PF drivers
are built as modules, the PF driver may probe before AF reinitializes
the hardware.
The PF driver treats the RVUM block revision as an indication that AF
initialization is complete. If this value is left uncleared at shutdown,
PF may incorrectly assume AF is ready and access stale hardware state,
leading to a crash.
Clear the RVUM block revision during AF shutdown to avoid PF
mis-detecting AF readiness after kexec. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: clear stale link mapping of ahvif->links_map
When an arvif is initialized in non-AP STA mode but MLO connection
preparation fails before the arvif is created
(arvif->is_created remains false), the error path attempts to delete all
links. However, link deletion only executes when arvif->is_created is true.
As a result, ahvif retains a stale entry of arvif that is initialized but
not created.
When a new arvif is initialized with the same link id, this stale mapping
triggers the following WARN_ON.
WARNING: drivers/net/wireless/ath/ath12k/mac.c:4271 at ath12k_mac_op_change_vif_links+0x140/0x180 [ath12k], CPU#3: wpa_supplicant/275
Call trace:
ath12k_mac_op_change_vif_links+0x140/0x180 [ath12k] (P)
drv_change_vif_links+0xbc/0x1a4 [mac80211]
ieee80211_vif_update_links+0x54c/0x6a0 [mac80211]
ieee80211_vif_set_links+0x40/0x70 [mac80211]
ieee80211_prep_connection+0x84/0x450 [mac80211]
ieee80211_mgd_auth+0x200/0x480 [mac80211]
ieee80211_auth+0x14/0x20 [mac80211]
cfg80211_mlme_auth+0x90/0xf0 [cfg80211]
nl80211_authenticate+0x32c/0x380 [cfg80211]
genl_family_rcv_msg_doit+0xc8/0x134
Fix this issue by unassigning the link vif and clearing ahvif->links_map
if arvif is only initialized but not created.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: gfx3d: add parent to parent request map
After commit d228ece36345 ("clk: divider: remove round_rate() in favor
of determine_rate()") determining GFX3D clock rate crashes, because the
passed parent map doesn't provide the expected best_parent_hw clock
(with the roundd_rate path before the offending commit the
best_parent_hw was ignored).
Set the field in parent_req in addition to setting it in the req,
fixing the crash.
clk_hw_round_rate (drivers/clk/clk.c:1764) (P)
clk_divider_bestdiv (drivers/clk/clk-divider.c:336)
divider_determine_rate (drivers/clk/clk-divider.c:358)
clk_alpha_pll_postdiv_determine_rate (drivers/clk/qcom/clk-alpha-pll.c:1275)
clk_core_determine_round_nolock (drivers/clk/clk.c:1606)
clk_core_round_rate_nolock (drivers/clk/clk.c:1701)
__clk_determine_rate (drivers/clk/clk.c:1741)
clk_gfx3d_determine_rate (drivers/clk/qcom/clk-rcg2.c:1268)
clk_core_determine_round_nolock (drivers/clk/clk.c:1606)
clk_core_round_rate_nolock (drivers/clk/clk.c:1701)
clk_core_round_rate_nolock (drivers/clk/clk.c:1710)
clk_round_rate (drivers/clk/clk.c:1804)
dev_pm_opp_set_rate (drivers/opp/core.c:1440 (discriminator 1))
msm_devfreq_target (drivers/gpu/drm/msm/msm_gpu_devfreq.c:51)
devfreq_set_target (drivers/devfreq/devfreq.c:360)
devfreq_update_target (drivers/devfreq/devfreq.c:426)
devfreq_monitor (drivers/devfreq/devfreq.c:458)
process_one_work (arch/arm64/include/asm/jump_label.h:36 include/trace/events/workqueue.h:110 kernel/workqueue.c:3284)
worker_thread (kernel/workqueue.c:3356 (discriminator 2) kernel/workqueue.c:3443 (discriminator 2))
kthread (kernel/kthread.c:467)
ret_from_fork (arch/arm64/kernel/entry.S:861) |
