| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| djehuty is a research data repository system developed by 4TU.ResearchData. Prior to version 26.3.2, An unauthenticated attacker can inject SPARQL into the search/listing queries through three separate parameters. Because the affected queries are read (SELECT) queries, this does not write to the store, but it allows: Cross-graph data exfiltration — e.g. UNION-ing in triples from graphs the request was never scoped to (drafts/private/internal data held in the RDF store); denial of service — expensive or malformed queries that tie up the SPARQL backend / web workers. No account or user interaction is required. This issue has been patched in version 26.3.2. |
| Starlette is a lightweight ASGI framework/toolkit. Prior to version 1.0.1, the HTTP `Host` request header was not validated before being used to reconstruct `request.url`. Because the routing algorithm relies on the raw HTTP path while `request.url` is rebuilt from the `Host` header, a malformed header could make `request.url.path` differ from the path that was actually requested. Middleware and endpoints that apply security restrictions based on `request.url` (rather than the raw `scope` path) could therefore be bypassed. Users should upgrade to a version greater than or equal to version 1.0.1, which validates the `Host` header against the grammar of RFC 9112 §3.2 / RFC 3986 §3.2.2 when constructing `request.url` and falls back to `scope["server"]` for malformed values. |
| A flaw was found in rubygem-hammer_cli. A command injection vulnerability exists in Hammer CLI and the Railties (Ruby on Rails) component distributed with Satellite due to the insecure interpolation of the $EDITOR environment variable into the Ruby system() method. By passing a single interpolated string to system(), the application invokes a system shell (/bin/sh) that interprets shell metacharacters (e.g., ;, |, &). |
| A flaw was found in Foreman. The Red Hat Satellite /unattended/provision API endpoint is vulnerable to an authentication bypass due to a semantic logic flaw in host_verifier.rb. The application verifies the database state of a provisioning token rather than its actual presence in the incoming HTTP request. Because a host actively undergoing provisioning has an unexpired token in the database, the server's valid_host_token? method evaluates to true, granting access to the kickstart template even if the requester provides no token at all in the URL. |
| TP-Link TL-WR841N contains an authenticated OS command injection vulnerability in the IPv6 WAN configuration. A crafted IPv6 Gateway value is improperly incorporated into a system command, allowing an authenticated administrator to execute arbitrary operating system commands.
Successful exploitation may allow unauthorized access to sensitive information, modification of device configuration or services, and disruption of device operation. |
| iControl is affected by an insecure Cross-Origin Resource Sharing (CORS) policy vulnerability, which could allow a malicious website to execute cross-origin requests with included credentials, enabling an attacker to access and exfiltrate sensitive data within the context of the victim's active session. |
| Authentication bypass by capture-replay in mod_auth_digest in Apache Software Foundation Apache HTTP Server 2.4.x on all platforms allows a man-in-the-middle (MITM) attacker to replay captured digest authentication credentials via crafted requests that trigger garbage collection of the client's shared memory entry when AuthDigestNonceLifetime is set to 0.
Users are recommended to upgrade to version 2.4.69, which fixes this issue. |
| Use after free in mod_auth_digest in Apache Software Foundation Apache HTTP Server before 2.4.69 on all platforms allows an unauthenticated remote client to cause authentication state corruption via concurrent Digest authentication requests when AuthDigestNcCheck is enabled or AuthDigestNonceLifetime is set to 0.
Users are recommended to upgrade to version 2.4.69, which fixes this issue. |
| Integer overflow in mod_dav_fs in Apache HTTP Server through 2.4.68 allows an authenticated WebDAV client with write access to crash worker processes and persistently corrupt a directory's property database via PROPPATCH requests declaring many XML namespaces. |
| A NULL pointer dereference in mod_xml2enc in Apache Software Foundation Apache HTTP Server before 2.4.69 on all platforms allows an untrusted backend server to cause a denial of service via a proxied response with a charset whose conversion partially succeeds then fails.
Users are recommended to upgrade to version 2.4.69, which fixes this issue. |
| Roundcube Webmail before 1.5.12 and 1.6 before 1.6.12 is prone to a Cross-Site-Scripting (XSS) vulnerability via the animate tag in an SVG document. |
| Podgrab contains an unauthenticated denial-of-service vulnerability caused by unsynchronized concurrent access to shared maps (activePlayers and allConnections) in its WebSocket handler, where Wshandler and HandleWebsocketMessages goroutines read and write these maps without a mutex. A remote attacker can open multiple WebSocket connections to the /ws endpoint and send messages in a loop to trigger a Go runtime data race that crashes the process, causing a denial of service that requires operator intervention to restore service. |
| NULL Pointer Dereference vulnerability in Apache HTTP Servers mod_heartmonitor over unicast listener.
This issue affects Apache HTTP Server: from 2.4.0 through 2.4.68. |
| An OS
command injection vulnerability in the TDDP module of Deco BE11000 and Deco M9 Plus allows an
adjacent network attacker to execute arbitrary commands with root privileges by
sending a crafted UDP packet.
Successful exploitation may lead to complete
device compromise, including unauthorized command execution, modification of
device settings, and loss of confidentiality, integrity, and availability |
| Protection mechanism failure for some Intel(R) oneCCL Bindings for PyTorch before version v2.8.0 within Ring 3: User Applications may allow an escalation of privilege. Unprivileged software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires passive user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: cap out-of-range rx MCS instead of leaving bogus rate
ath11k can receive HT/VHT/HE frames whose reported MCS is above the
maximum that can be expressed in the corresponding mac80211 rate space
(e.g. an HE frame reported with MCS 12, while HE tops out at MCS 11).
The frame itself is valid and decodes correctly, but for such a frame
ath11k_dp_rx_h_rate() leaves rx_status->rate_idx set to the out-of-range
value and never assigns rx_status->encoding, so it stays RX_ENC_LEGACY
from the ath11k_dp_rx_h_ppdu() initialization. Once that frame reaches
mac80211 it trips the rate sanity check and the frame is dropped with a
splat:
ath11k_pci 0000:03:00.0: Received with invalid mcs in HE mode 12
WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:5433 ieee80211_rx_list+0xb0a/0xe90 [mac80211]
Dropping the frame would discard otherwise valid data, so instead cap the
reported MCS to the maximum the rate space can express and deliver the
frame. Set rx_status->encoding before the range check and assign rate_idx
from the capped value, so a frame with an out-of-range MCS no longer
leaves partial or bogus rate metadata behind. Also downgrade the logging
level since they are not treated as invalid frames now. The only loss is
that such a frame is reported as the capped MCS in the rx rate statistics.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom_wcnss: Fix handling the lack of PD regulators in v3
The changes introduced to handle single power domain platforms have
swapped the info pointer increment from num_pd_vregs to num_pds, which
would shift the info pointer past the end of the array for pronto-v3,
which does not list power domain regulators in vregs.
This showed up as a difference between GCC- and LLVM-compiled kernels
on SDM632 devices, where only with LLVM one would get the
"regulator request with no identifier" error, because the out-of-bounds
memory ended up being zeroed. Fix by skipping the increment when there
are more power domains than regulators. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: tps6594: Fix device node reference leaks in multiphase loop
In tps6594_regulator_probe(), the multi-phase configuration loop calls
of_find_node_by_name() to find buck nodes by name, and of_get_parent()
twice to navigate to the PMIC parent node. None of the acquired node
references (np, intermediate parent, np_pmic_parent) are ever released
via of_node_put(), causing a reference leak on every loop iteration.
Additionally, of_find_node_by_name() can return NULL, but the result was
immediately passed to of_node_full_name() and of_get_parent() without a
NULL check, which could lead to a NULL pointer dereference.
Fix this by:
- Adding a NULL check for np after of_find_node_by_name()
- Storing the intermediate parent node in a local variable np_parent
- Calling of_node_put() on np, np_parent and np_pmic_parent at the
end of each loop iteration |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/pt: Fix stop/start with no update
If pt_event_stop() is called without PERF_EF_UPDATE flag, then
perf_aux_output_end() is not called. A subsequent call to pt_event_start()
will call perf_aux_output_begin() again which violates the rule against
nesting and triggers a WARNING in perf_aux_output_begin().
Originally, pt_event_stop() was never called without PERF_EF_UPDATE,
because the only code paths to do so are from event overflow, and Intel PT
does not do that.
However the introduction of group throttling by commit 9734e25fbf5ae
("perf: Fix the throttle logic for a group") meant that an Intel PT event
could be throttled if it was part of a group. Throttling calls PMU
->stop() / ->start() callbacks without flags.
An example is when AUX area sampling is used. The following commands
hit the issue:
echo 10000 > /proc/sys/kernel/perf_event_max_sample_rate
perf record -F32000 --aux-sample -e '{intel_pt//u,cycles:u}' \
-- bash -c 'for i in `seq 1 100000` ; do true ; done'
Use PERF_HES_UPTODATE to track whether perf_aux_output_begin() and
perf_aux_output_end() are balanced. A cleared PERF_HES_UPTODATE bit
indicates that an AUX output context is still open.
Amend pt_event_start() / pt_event_stop() accordingly so that begin/end
stay balanced:
- In non-snapshot mode, stop() always closes the buffer (the buffer may
have run out of space, and that accounting is done by the update), so
a following start() opens a fresh one as before.
- In snapshot/overwrite mode, stop() without PERF_EF_UPDATE leaves the
buffer open so that pt_event_snapshot_aux() can still copy from it,
and start() then only re-enables tracing instead of calling
perf_aux_output_begin() again.
Note that pt_event_del() calls pt_event_stop() with PERF_EF_UPDATE flag set
(as is required by the documentation), so a final call to
perf_aux_output_end() is assured. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: embed f2fs_gc_kthread in f2fs_sb_info
Instead of allocating f2fs_gc_kthread dynamically, embed it in
f2fs_sb_info. This simplifies lifetime management and prepares for
fixing race conditions during teardown.
- __sbi_store - remount|shutdown
- f2fs_stop_gc_thread
- access sbi->gc_thread
- sbi->gc_thread = NULL
- access sbi->gc_thread->f2fs_gc_task |
