| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Prevent excessive number of frames
In this case, the user constructed the parameters with maxpacksize 40
for rate 22050 / pps 1000, and packsize[0] 22 packsize[1] 23. The buffer
size for each data URB is maxpacksize * packets, which in this example
is 40 * 6 = 240; When the user performs a write operation to send audio
data into the ALSA PCM playback stream, the calculated number of frames
is packsize[0] * packets = 264, which exceeds the allocated URB buffer
size, triggering the out-of-bounds (OOB) issue reported by syzbot [1].
Added a check for the number of single data URB frames when calculating
the number of frames to prevent [1].
[1]
BUG: KASAN: slab-out-of-bounds in copy_to_urb+0x261/0x460 sound/usb/pcm.c:1487
Write of size 264 at addr ffff88804337e800 by task syz.0.17/5506
Call Trace:
copy_to_urb+0x261/0x460 sound/usb/pcm.c:1487
prepare_playback_urb+0x953/0x13d0 sound/usb/pcm.c:1611
prepare_outbound_urb+0x377/0xc50 sound/usb/endpoint.c:333 |
| The Micca KE700 system relies on a 6-bit portion of an identifier for authentication within rolling codes, providing only 64 possible combinations. This low entropy allows an attacker to perform a brute-force attack against one component of the rolling code. Successful exploitation simplify an attacker to predict the next valid rolling code, granting unauthorized access to the vehicle. |
| A security flaw has been discovered in Open5GS up to 2.7.6. This vulnerability affects the function ogs_gtp2_parse_tft in the library lib/gtp/v2/types.c of the component SMF. Performing a manipulation of the argument pf[0].content.length results in denial of service. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| eNet SMART HOME server 2.2.1 and 2.3.1 ships with default credentials (user:user, admin:admin) that remain active after installation and commissioning without enforcing a mandatory password change. Unauthenticated attackers can use these default credentials to gain administrative access to sensitive smart home configuration and control functions. |
| eNet SMART HOME server 2.2.1 and 2.3.1 contains a missing authorization vulnerability in the resetUserPassword JSON-RPC method that allows any authenticated low-privileged user (UG_USER) to reset the password of arbitrary accounts, including those in the UG_ADMIN and UG_SUPER_ADMIN groups, without supplying the current password or having sufficient privileges. By sending a crafted JSON-RPC request to /jsonrpc/management, an attacker can overwrite existing credentials, resulting in direct account takeover with full administrative access and persistent privilege escalation. |
| A weakness has been identified in Open5GS up to 2.7.6. This issue affects the function sgwc_s5c_handle_create_session_response of the component SGW-C. Executing a manipulation can lead to memory corruption. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| A security vulnerability has been detected in Open5GS up to 2.7.6. Impacted is an unknown function of the file /src/mme/esm-build.c of the component MME. The manipulation leads to memory corruption. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A flaw has been found in Open5GS 2.7.6. The impacted element is the function mme_s11_handle_create_session_response of the component MME. This manipulation causes denial of service. The attack can be initiated remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was determined in Wavlink WL-WN579A3 up to 20210219. Affected is an unknown function of the file /cgi-bin/login.cgi. Executing a manipulation of the argument key can lead to command injection. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in Wavlink WL-WN579A3 up to 20210219. Affected by this issue is the function DeleteMac of the file /cgi-bin/wireless.cgi. The manipulation of the argument delete_list results in command injection. The attack can be executed remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| A weakness has been identified in Wavlink WL-WN579A3 up to 20210219. This affects the function AddMac of the file /cgi-bin/wireless.cgi. This manipulation of the argument macAddr causes command injection. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in MindsDB up to 25.14.1. This vulnerability affects the function clear_filename of the file mindsdb/utilities/security.py of the component File Upload. Such manipulation leads to server-side request forgery. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. The name of the patch is 74d6f0fd4b630218519a700fbee1c05c7fd4b1ed. It is best practice to apply a patch to resolve this issue. |
| A vulnerability was detected in lintsinghua DeepAudit up to 3.0.3. This issue affects some unknown processing of the file backend/app/api/v1/endpoints/embedding_config.py of the component IP Address Handler. Performing a manipulation results in server-side request forgery. It is possible to initiate the attack remotely. Upgrading to version 3.0.4 and 3.1.0 is capable of addressing this issue. The patch is named da853fdd8cbe9d42053b45d83f25708ba29b8b27. It is suggested to upgrade the affected component. |
| Firebird is an open-source relational database management system. In versions prior to 6.0.0, 5.0.4, 4.0.7 and 3.0.14, when processing an op_slice network packet, the server passes an unprepared structure containing a null pointer to the SDL_info() function, resulting in a null pointer dereference and server crash. An unauthenticated attacker can trigger this by sending a crafted packet to the server port. This issue has been fixed in versions 6.0.0, 5.0.4, 4.0.7 and 3.0.14. |
| Firebird is an open-source relational database management system. In versions prior to 5.0.4, 4.0.7 and 3.0.14, when processing CNCT_specific_data segments during authentication, the server assumes segments arrive in strictly ascending order. If segments arrive out of order, the Array class's grow() method computes a negative size value, causing a SIGSEGV crash. An unauthenticated attacker who knows only the server's IP and port can exploit this to crash the server. This issue has been fixed in versions 5.0.4, 4.0.7 and 3.0.14. |
| Use after free in Windows Container Isolation FS Filter Driver allows an authorized attacker to elevate privileges locally. |
| Out-of-bounds write vulnerability in the WEB module.Impact: Successful exploitation of this vulnerability will affect availability and confidentiality. |
| Out-of-bounds write vulnerability in the WEB module.Impact: Successful exploitation of this vulnerability will affect availability and confidentiality. |
| Out-of-bounds write vulnerability in the kernel module.
Impact: Successful exploitation of this vulnerability will affect availability and confidentiality. |
| Double free vulnerability in the multi-mode input system.
Impact: Successful exploitation of this vulnerability may affect availability. |
