| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix SCMI device destroy lifetimes
scmi_child_dev_find() drops the reference returned by
device_find_child() before returning the scmi_device pointer. A
concurrent unregister can then release the device while the destroy path
is still using the returned pointer.
Make the lookup helper return the device_find_child() reference and keep
it until scmi_device_destroy() has finished unregistering the child.
Also split device_unregister() in __scmi_device_destroy() so the SCMI bus
ID is not made reusable until after device_del() has removed the old
scmi_dev.N name from sysfs. This avoids a new SCMI device reusing the
same ID while the old device is still registered.
The final device release callback is also a possible cleanup path when
SCMI children are deleted by driver core recursion rather than
__scmi_device_destroy(). Release the SCMI bus ID from a common helper
used by destroy, register-failure and final-release paths, and clear
scmi_dev->id after freeing it so the final release cannot free the same
ID again. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Only fini scheduler after successful init
msm_ringbuffer_new() destroys a partially initialized ring through
msm_ringbuffer_destroy() when an allocation or scheduler setup step
fails.
If drm_sched_init() fails before it finishes initializing the scheduler,
the failure path still calls drm_sched_fini(). That teardown path assumes
the scheduler work items, lists, and workqueue state were initialized.
Track successful scheduler initialization and call drm_sched_fini() only
after drm_sched_init() returned 0.
This issue was found by a static analysis checker and confirmed by
manual source review.
Patchwork: https://patchwork.freedesktop.org/patch/738905/ |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Zero queue and stack outputs on lock failure
Queue and stack pop/peek helpers accept an uninitialized output buffer
because the verifier expects the helper to initialize it. The empty-map
error path clears the buffer, but a failed lock acquisition returns
-EBUSY without writing it.
Clear the output before returning -EBUSY so BPF programs cannot observe
uninitialized stack contents after a failed helper call. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv, bpf: Fix memory leak in bpf_jit_free
When bpf_int_jit_compile() is called for subprograms, it returns early
during the first pass (!prog->is_func || extra_pass is false), keeping
ctx->offset alive for the subsequent extra pass.
If JIT compilation fails for a later subprogram, the BPF core aborts
and calls bpf_jit_free() to clean up the first subprogram. However,
bpf_jit_free() fails to free jit_data->ctx.offset, which causes a
memory leak of the JIT context offsets array.
Fix this by adding the missing kfree(jit_data->ctx.offset) in
bpf_jit_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix ABBA deadlock in ext4_xattr_inode_cache_find()
Syzbot/stress-ng reported an ABBA deadlock in ext4 when exercising
concurrent xattr workloads (using the ea_inode mount/format option).
The deadlock occurs between the running transaction and the eviction
thread:
- Task 1 (stress-ng): Holds a reference to a shared mbcache_entry (ce)
and calls ext4_xattr_inode_cache_find() -> ext4_iget() to retrieve
the corresponding EA inode. Since the EA inode is currently being
evicted, ext4_iget() blocks in __wait_on_freeing_inode() waiting for
eviction to complete.
- Task 2 (eviction thread): Currently evicting the same EA inode in
ext4_evict_ea_inode(). It calls mb_cache_entry_wait_unused(oe) which
blocks waiting for Task 1 to release the reference to the mbcache_entry.
To break this deadlock, implement a new ext4_iget() configuration flag
named EXT4_IGET_NOWAIT. When set, perform a non-blocking lookup of the
inode via VFS's find_inode_nowait() API.
If the inode is currently being evicted (marked with I_FREEING or
I_WILL_FREE) or created (I_CREATING), or if it is not present in the VFS
inode cache (cache miss), simply skip it (returning -ENOENT) rather than
waiting for eviction/creation to complete, breaking the ABBA cycle.
Since we return -ENOENT immediately on a cache miss, we never attempt to
allocate a new inode or call iget_locked(), completely eliminating any
TOCTOU race window.
If the returned inode is I_NEW, wait for its initialization to clear via
wait_on_new_inode(). If initialization fails and the inode is unhashed
during wait_on_new_inode() waking up (e.g., due to an I/O read error in
another thread), safely drop the reference and return -ENOENT. This
unhashed check is executed unconditionally on all cache-hit pathways to
properly handle concurrent initialization failures.
Finally, standard validation checks (including is_bad_inode,
EXT4_EA_INODE_FL, file_acl, and xattr flags) are executed as normal inside
check_igot_inode() to fully guarantee VFS-layer safety.
In ext4_xattr_inode_cache_find(), invoke ext4_iget() with the new
EXT4_IGET_NOWAIT flag to perform the non-blocking cache search. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: complete object teardown when the destroy command fails
erdma_destroy_qp(), erdma_destroy_cq(), erdma_dereg_mr(), and
erdma_destroy_ah() returned early when erdma_post_cmd_wait() failed,
leaking the queue buffers, MTTs, doorbells and the STAG, QPN, CQN and AHN
identifiers. A command timeout clears ERDMA_CMDQ_STATE_OK_BIT and
permanently disables the command queue, so no retry can succeed; the RDMA
core keeps the object after a failed destructor and forced uverbs cleanup
then nulls the pointers, making the resources unreachable.
Warn on failure but release every software-owned resource and return
success, since during terminal destruction the hardware command result is
only diagnostic. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix WARNING in bpf_tracing_link_release
The trampoline could be corrupted by the blindly
'tr->flags = BPF_TRAMP_F_TAIL_CALL_CTX' in verifier.
1. A fexit attached to a tail_call_reachable prog. 'tr->flags' became
'BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_TAIL_CALL_CTX'. And, the
trampoline would poke the target prog's nop insn using jmp insn instead
of call insn.
2. Another fexit loaded with the same tail_call_reachable prog target.
'tr->flags' became 'BPF_TRAMP_F_TAIL_CALL_CTX'.
3. Close the first fexit link. Due to no BPF_TRAMP_F_CALL_ORIG in
'tr->flags', the trampoline will fail to restore the prog's nop insn
using call insn.
[ 3.410719] WARNING: kernel/bpf/syscall.c:3551 at bpf_tracing_link_release+0x53/0x60, CPU#1: test_progs/98
...
[ 3.428793] bpf_link_free+0x58/0x130
[ 3.429293] bpf_link_release+0x23/0x30
Fix the warning by updating 'tr->flags' with '|=' and lock. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mediatek: use devm_gpiochip_add_data() for GPIO chip
The gpio_chip is allocated with device-managed memory but registered with
the non-managed gpiochip_add_data(). This was harmless while the drivers
were built-in, but once they can be built as modules and unbound/rmmod'd,
devm frees the gpio_chip's memory while it is still registered, causing a
use-after-free.
Register it with devm_gpiochip_add_data() so it shares the same
device-managed lifecycle, which also lets the manual gpiochip_remove()
error paths go away. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Validate string descriptors
The string descriptor length includes a two-byte header while the UTF-16
payload starts after it. utf16s_to_utf8s() expects a count of UTF-16 code
units, not bytes. Passing the payload byte count can make it read beyond
the descriptor buffer.
Validate that the payload has an even byte count, pass a code-unit count to
the converter, and allocate sufficient UTF-8 output space.
The raw string buffer starts after the descriptor header but its size is
bLength. Copying bLength bytes from that pointer can read beyond the
response buffer.
Allocate a zeroed bLength-sized buffer and copy only the UTF-16
payload. This preserves the raw buffer size consumed by the RPMB device-ID
ABI while avoiding the overread. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: oc-tiny: switch to managed controller allocation
The controller is allocated with the non-managed spi_alloc_host() while
the interrupt is registered with devm_request_irq(). During removal,
spi_bitbang_stop() only unregisters the controller; the subsequent
spi_controller_put() then frees the controller together with its
embedded driver-private devdata, which is the IRQ handler's dev_id. The
devm_request_irq() release action (free_irq()), which drains the
handler, does not run until after .remove() returns. A late or latched
interrupt can therefore reach tiny_spi_irq() and dereference
already-freed memory (e.g. hw->base).
Switch to devm_spi_alloc_host() so that the devres LIFO order releases
the controller only after free_irq() has drained the handler, and drop
the now-redundant spi_controller_put() from .remove(). The probe error
path is simplified to direct returns.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Don't fall back to a freed smmu after devm_krealloc()
__tegra241_cmdqv_probe() uses devm_krealloc() to grow @smmu into the larger
tegra241_cmdqv, which frees the original @smmu once it relocates. A failure
after that returned NULL, and the caller then dereferenced the freed @smmu
on its fallback path.
Return an int and take @smmu by reference instead, then update *smmu to the
reallocated pointer after devm_krealloc() succeeds, so the caller and its
fallback path both use the live @smmu rather than the freed original. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Fix VINTF0 leak on the init-failure path
tegra241_cmdqv_init_structures() allocates VINTF0 with kzalloc_obj(), inits
it, and preallocates its logical VCMDQs. Two of its error paths leak.
When tegra241_cmdqv_init_vintf() fails it returns before VINTF0 reaches the
cmdqv->vintfs[] array, so the devres unwind on probe failure cannot reach
it; free it directly there.
A later VCMDQ preallocation failure instead leaves VINTF0 published, and so
this time the unwind does reach tegra241_cmdqv_remove_vintf(), which then
frees it from vintf->hyp_own. But tegra241_vintf_hw_init() sets that flag
only afterward, from a HW read-back, so the still-uninited VINTF0 reads as
guest-owned and leaks, with mutex_destroy() and ida_destroy() run on fields
it never set up.
Decide ownership from vintf->idx instead, the index assigned when its id is
allocated: idx 0 is the kernel-owned VINTF0, while idx >= 1 marks a guest
VINTF. So the in-kernel free decision in tegra241_cmdqv_remove_vintf() and
tegra241_vintf_free_lvcmdq() now keys on idx too, and hyp_own stays a pure
HW-readback state. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mediatek: pllfh: Fix IO remapping leak in register_pllfhs error path
When mtk_clk_register_pllfhs function fails to register a PLL, it
unregisters all PLLs and cleans up itself in its error path before
returning, so the function callers don't need to do it.
But contrary to mtk_clk_unregister_pllfhs function, that does almost
the same sequence, it does not free the IO memory mapped on fhctl node,
leading to a leak.
Fix this leak by factorizing the cleanup sequence in a new private
function and use it both mtk_clk_register_pllfhs and
mtk_clk_unregister_pllfhs functions.
Also, change the loop index start value to avoid the -1 operation on
index at each loop. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix UAF when probe runs concurrent to dyn ID removal
Dynamic IDs are only guaranteed to be valid when dynids.lock is held,
as remove_id_store() can free the node. Thus, make a copy in
pci_match_device(). Also, clarify that the id parameter is only valid
during probe. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cxgb4: Fix dereg_skb leak and double free in write_tpt_entry()
When the device is in the fatal error state, write_tpt_entry() returns -EIO
before handing the caller's preallocated skb to the transmit path; its
allocation-failure returns do the same. c4iw_dereg_mr() ignores the error
and frees mhp, leaking mhp->dereg_skb. c4iw_get_dma_mr() instead frees the
skb a second time after dereg_mem() already consumed it, a double free.
Make write_tpt_entry() the sole owner of a non-NULL skb, freeing it on
every return preceding handoff to c4iw_ofld_send(): fatal error, tpt and
stag allocation failure. c4iw_ofld_send() consumes the skb on success and
error alike, so drop the redundant kfree_skb() in c4iw_get_dma_mr() after
dereg_mem(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Add vm_bind region with kbo range overlap check
When a VM is created, caller has to specify the range of the address space
carve-out set aside for mapping kernel BO's. That means vm_bind mappings of
UM-exposed BO's should not intersect with that region, but at the moment
we're not checking this.
At first, I thought of giving these values to drm_gpuvm_init() through its
reserve_{offset, range} arguments, but it turns out that is meant for VM
address spans that are not managed through the usual drm_gpuvm split/merge
circuit, so storing the end of the user VA range at VM creation time and
doing a quick check in the vm_bind ioctl path was the simplest workaround.
The new check also makes sure vm_bind range doesn't overflow the size of a
64-bit unsigned integer. That was already being done further down the call
stack inside drm_gpuvm_sm_map -> drm_gpuvm_range_valid, but it's best to
fail early in the driver before GPUVM functions are invoked so that we
won't waste time allocating vm_bind context resources. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix overreads in ath12k_wmi_process_csa_switch_count_event()
There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so
the parse infrastructure does not enforce a minimum length for the event
struct. Additionally, the num_vdevs field is taken directly from firmware
and used as a loop bound over the vdev_ids array without checking that it
fits within the TLV payload. Either condition can cause an out-of-bounds
read.
Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so
the parse infrastructure enforces a minimum length for the fixed-size event
struct. Add a helper ath12k_wmi_tlv_data_len() to recover the payload
length of a parsed TLV from the header preceding its data pointer. Use it
in ath12k_wmi_process_csa_switch_count_event() to bound num_vdevs before
the loop.
Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix stride mismatch in mac_phy_caps_parse()
Currently, in ath12k_wmi_mac_phy_caps_parse(), kzalloc() sizes the
mac_phy_caps buffer as tot_phy_id * len, where len is clamped to
min(firmware_len, sizeof(struct ath12k_wmi_mac_phy_caps_params)). The
subsequent memcpy() destination advances by sizeof(full struct) per slot
via C pointer arithmetic, not by the clamped len. When firmware sends
short TLVs, the second and later slots are written past the end of the
allocation.
The reader in ath12k_pull_mac_phy_cap_svc_ready_ext() also indexes the
buffer with full-struct pointer arithmetic, so the allocation must match
that stride.
Fix by using kzalloc_objs(), which derives the element size from the
pointer type, making allocation size and pointer stride provably
consistent regardless of what len the firmware provides.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix stride mismatch in mac_phy_caps_parse()
Currently, in ath11k_wmi_tlv_mac_phy_caps_parse(), kcalloc() sizes the
mac_phy_caps buffer as tot_phy_id * len, where len is clamped to
min(firmware_len, sizeof(struct wmi_mac_phy_capabilities)). The subsequent
memcpy() destination advances by sizeof(full struct) per slot via C
pointer arithmetic, not by the clamped len. When firmware sends short
TLVs, the second and later slots are written past the end of the
allocation.
The reader in ath11k_pull_mac_phy_cap_svc_ready_ext() also indexes the
buffer with full-struct pointer arithmetic, so the allocation must match
that stride.
Fix by using kzalloc_objs(), which derives the element size from the
pointer type, making allocation size and pointer stride provably
consistent regardless of what len the firmware provides.
Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: qcom: scm: Fix NULL dereference in IRQ handler before __scm is published
In qcom_scm_probe(), devm_request_threaded_irq() is called before
smp_store_release(&__scm, scm). Two paths can dereference __scm before
it is published, both causing a NULL pointer dereference.
The IRQ handler receives scm via its data argument but passes only wq_ctx
to qcom_scm_waitq_wakeup() and qcom_scm_get_completion(), which then
dereference __scm directly. Thread scm through both functions so the IRQ
handler path never touches __scm.
Non-atomic SMC calls made during probe (e.g. from qcom_tzmem_init via
qcom_scm_shm_bridge_enable) can return WAITQ_SLEEP, causing
qcom_scm_wait_for_wq_completion() to run before __scm is published and
dereference it. Add platform_set_drvdata(pdev, scm) early in probe and
change qcom_scm_wait_for_wq_completion() to take the device pointer and
use dev_get_drvdata() to reach scm, removing any dependency on __scm. |
