| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| `Element.findall()` and fully-consumed `Element.iterfind()` exhibit `O(n^2)` time complexity when using XPath index predicates (e.g. `[1]`, `[last()]`, `[last()-N]`) on XML documents with many same-tag siblings. `Element.find()` is only affected when the first match is near the end of the sibling list, such as with `[last()]` or `[last()-N]`; `.//item[1]` short-circuits after the first match. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-eth: put MAC endpoint device on disconnect
fsl_mc_get_endpoint() returns the MAC endpoint device with a reference
taken through device_find_child(). The Ethernet connect path stores that
device in mac->mc_dev and keeps it for the lifetime of the connected MAC
object.
However, the disconnect path only disconnects and closes the MAC before
freeing the dpaa2_mac object. It does not drop the endpoint device
reference stored in mac->mc_dev, so every successful connect leaks that
device reference when the MAC is later disconnected.
Drop the endpoint device reference after closing the MAC and before
freeing the dpaa2_mac object. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: fix memory leak on slave unregistration by removing synced VLANs
When an HSR master device is brought UP, it auto-adds VLAN 0 via
vlan_vid0_add(), which propagates VID 0 to its slave devices (slave A and B).
If a slave device is later unregistered while HSR is active (e.g., during
netns cleanup or interface destruction), hsr_del_port() is called to
detach the slave port from the HSR master. However, hsr_del_port() currently
does not delete the VLAN IDs that were synced to the slave device by HSR.
As a result, the slave device retains a refcount on VID 0 (and any other
synced VLANs). When the slave device is destroyed, its vlan_info /
vlan_vid_info structure remains allocated, leading to a memory leak.
Fix this by calling vlan_vids_del_by_dev(port->dev, master->dev) in
hsr_del_port() before unlinking slave A or slave B ports, matching the
propagation logic in hsr_ndo_vlan_rx_add_vid() / hsr_ndo_vlan_rx_kill_vid()
and the cleanup behavior in bonding and team drivers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: detect_link_and_local_sink: DP alt mode timeout path leaks prev_sink reference
prev_sink is unconditionally retained via dc_sink_retain at function
entry, but the DP alt mode timeout path inside SIGNAL_TYPE_DISPLAY_PORT
returns false without releasing prev_sink. All other return paths in the
function correctly call dc_sink_release(prev_sink), making this the only
missing cleanup.
(cherry picked from commit 45510cf662dcf46b5d8926d454f338809f107b9d) |
| The WP MAPS PRO WordPress plugin before 6.1.3 does not perform a capability check in one of its AJAX actions, which is also available to unauthenticated users, and does not restrict the operation it dispatches, allowing unauthenticated attackers to trigger uncontrolled recursion that exhausts server resources, resulting in a Denial of Service. |
| Consul Community Edition and Consul Enterprise 1.3.0 through 2.0.2 are vulnerable to an unauthenticated denial of service in several agent HTTP API endpoints. A remote caller could cause the agent to consume substantial memory before the request was rejected. This vulnerability, CVE-2026-19113, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: defer destroy_previous_session() until after NTLM authentication
In ntlm_authenticate(), destroy_previous_session() is called using a
user pointer resolved from the client-supplied NTLM blob username field
before the NTLMv2 response is validated. An authenticated attacker can
set the NTLM blob username to match a victim account and set
PreviousSessionId to the victim's session ID; destroy_previous_session()
destroys the victim's session while ksmbd_decode_ntlmssp_auth_blob()
subsequently rejects the request with -EPERM.
Move destroy_previous_session() and the prev_id assignment to after
ksmbd_decode_ntlmssp_auth_blob() returns success and use sess->user
rather than the pre-authentication lookup result. This matches the
ordering already used by krb5_authenticate(), where
destroy_previous_session() is called only after
ksmbd_krb5_authenticate() returns success. |
| A vulnerability has been found in lmammino oidc-authorizer 0.4.0. This issue affects the function parse_token_from_header of the file src/parse_token_from_header.rs of the component Authorization Header Parsing. The manipulation of the argument authorization_token leads to denial of service. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| .NET Denial of Service Vulnerability |
| .NET Denial of Service Vulnerability |
| Windows DNS Client Denial of Service Vulnerability |
| .NET and Visual Studio Denial of Service Vulnerability |
| Klever-Go is the Go implementation of the Klever blockchain protocol. Prior to 1.7.18, the P2P resolver request handling logic is vulnerable to hash-array amplification. A connected peer can send a compressed RequestDataType_HashArrayType direct request that is only 442 bytes on the wire but expands into 200,000 decoded hash entries inside the resolver path. The resolver's antiflood logic counts only a single logical message and the compressed wire size, and while Batch.Decompress() caps the decompressed byte size, it never limits the number of decoded repeated-field items. As a result, both TxResolver and TrieNodeResolver preallocate and iterate over the entire unchecked set of decoded hashes, causing remote memory and CPU amplification against any node that accepts P2P peer connections. This issue is fixed in version 1.7.18. |
| Klever-Go is the Go implementation of the Klever blockchain protocol. In versions 1.7.14 through 1.7.17, the direct-message ingress handler spawns a new goroutine for every incoming direct message before the processor-level antiflood layer makes any admission decision, with no semaphore, throttler, or bound on the number of concurrent in-flight spawns. Because the antiflood check runs inside the spawned goroutine rather than before it, a single connected peer can open a direct-send stream and send a stream of well-formed messages to force unbounded goroutine creation, where each goroutine allocates its own stack and holds a message reference until processing completes, adding scheduler and garbage-collection pressure faster than the runtime can drain it. This lets one peer degrade the node's availability and its ability to process legitimate traffic, resulting in a remotely triggerable denial of service. The issue is fixed in 1.7.18. |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.11, XhtmlParser.java imposes no maximum element nesting depth, so a deeply nested text.div narrative triggers unbounded recursion between parseElementInner() and parseElement(), raising a StackOverflowError. An attacker who can submit FHIR resources containing such narratives can thus crash a parsing or validation worker thread, affecting validator services and any application that parses attacker-supplied FHIR JSON or XML. This issue is fixed in version 6.9.11. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.15.0, a crafted PDF can cause large memory consumption when pypdf/_cmap.py function parse_bfrange parses unusually large source-code or destination-string tokens in a font /ToUnicode CMap during text extraction. This issue is fixed in 6.15.0. |
| Hono is a Web application framework that provides support for any JavaScript runtime. From 4.12.0 to 4.12.33, the languageDetector middleware is vulnerable to algorithmic complexity denial of service when processing a crafted language tag containing a large number of hyphen separated subtags. To implement progressive language tag truncation, normalizeLanguage() repeatedly calls parts.slice(0, i).join('-') for every possible prefix, so the total amount of string processing grows quadratically with the number of subtags. Language values may come from a query parameter, cookie, Accept-Language header, or URL path, depending on the detector configuration, and the default detector order enables query string, cookie, and header detection, so applications using languageDetector() may expose this processing to unauthenticated requests. An attacker may repeatedly send requests containing long, hyphen separated language tags, causing excessive CPU consumption and preventing unrelated requests from being processed. This issue is fixed in version 4.12.34. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.136.Final and 4.2.16.Final, the RedisArrayAggregator Redis codec clears retained partial aggregate state when the maxNestedArrayDepth limit is exceeded, but it does not clear the same state when the sibling maxElements limit is exceeded. A peer can start a valid RESP array, send a bulk string child, then send a nested array header longer than the configured maxElements. Netty throws a decoder exception in decodeRedisArrayHeader, but the existing partial aggregate remains retained in the handler. If the application leaves the channel alive after the exception, later messages are still consumed into the pre-error aggregate, allowing an unauthenticated peer to keep attacker-controlled aggregate state alive across a security-limit exception and pin retained pooled buffers. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. |
| aiosend is a synchronous and asynchronous Crypto Pay API client. Pror to version 3.0.7, `WebhookHandler.feed_update()` deserializes the entire request body before verifying the HMAC signature. This allows an unauthenticated attacker to force expensive parsing of arbitrary JSON payloads that will ultimately be rejected, leading to unnecessary CPU and memory consumption. Version 3.0.7 fixes the issue. Some workarounds are available. Restrict request body size at the reverse proxy or web framework, rate-limit webhook endpoints, and/or reject oversized requests before JSON parsing. |
| In sol commit 373d848 (2024-12-12), the broker does not fully release resources when handling malformed or duplicate CONNECT packets. When clients send invalid CONNECT packets - either due to repeated attempts or failed authentication - the server may silently drop the connection or send a CONNACK but fail to close the session or deallocate internal resources. This behavior allows an attacker to create numerous half-open connections that consume memory and file descriptors indefinitely, potentially triggering the Linux OOM killer and causing a denial of service. |
