| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Incorrect permission assignment for critical resource in Windows Accessibility Infrastructure (ATBroker.exe) allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: release admin tagset if init fails
nvme_fabrics creates an NVMe/FC controller in following path:
nvmf_dev_write()
-> nvmf_create_ctrl()
-> nvme_fc_create_ctrl()
-> nvme_fc_init_ctrl()
nvme_fc_init_ctrl() allocates the admin blk-mq resources right after
nvme_add_ctrl() succeeds. If any of the subsequent steps fail (changing
the controller state, scheduling connect work, etc.), we jump to the
fail_ctrl path, which tears down the controller references but never
frees the admin queue/tag set. The leaked blk-mq allocations match the
kmemleak report seen during blktests nvme/fc.
Check ctrl->ctrl.admin_tagset in the fail_ctrl path and call
nvme_remove_admin_tag_set() when it is set so that all admin queue
allocations are reclaimed whenever controller setup aborts. |
| A cross-origin issue in the Navigation API was addressed with improved input validation. This issue is fixed in Background Security Improvements for iOS 26.3.1, iPadOS 26.3.1, macOS 26.3.1, and macOS 26.3.2. Processing maliciously crafted web content may bypass Same Origin Policy. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Enable exception fixup for specific ADE subcode
This patch allows the LoongArch BPF JIT to handle recoverable memory
access errors generated by BPF_PROBE_MEM* instructions.
When a BPF program performs memory access operations, the instructions
it executes may trigger ADEM exceptions. The kernel’s built-in BPF
exception table mechanism (EX_TYPE_BPF) will generate corresponding
exception fixup entries in the JIT compilation phase; however, the
architecture-specific trap handling function needs to proactively call
the common fixup routine to achieve exception recovery.
do_ade(): fix EX_TYPE_BPF memory access exceptions for BPF programs,
ensure safe execution.
Relevant test cases: illegal address access tests in module_attach and
subprogs_extable of selftests/bpf. |
| A vulnerability has been found in TP-Link TL-WR841N v11, TL-WR842ND v2 and TL-WR494N v3. The vulnerability exists in the /userRpm/WlanNetworkRpm.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was found in OpenShift AI that allows for authentication bypass and privilege escalation across models within the same namespace. When deploying AI models, the UI provides the option to protect models with authentication. However, credentials from one model can be used to access other models and APIs within the same namespace. The exposed ServiceAccount tokens, visible in the UI, can be utilized with oc --token={token} to exploit the elevated view privileges associated with the ServiceAccount, leading to unauthorized access to additional resources. |
| Mirotalk before commit 9de226 was discovered to contain a DOM-based cross-site scripting (XSS) vulnerability which allows attackers to execute arbitrary code via sending crafted payloads in messages to other users over RTC connections. |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. Starting in version 4.4.0 and prior to version 4.14.3, a stack-based buffer overflow vulnerability exists in the Wazuh Database synchronization module (`wdb_delta_event.c`). The SQL query construction logic allows for an integer underflow when calculating the remaining buffer size. This occurs because the code incorrectly aggregates the return value of `snprintf`. If a specific database synchronization payload exceeds the size of the query buffer (2048 bytes), the size calculation wraps around to a massive integer, effectively removing bounds checking for subsequent writes. This allows an attacker to corrupt the stack, leading to a Denial of Service (DoS) or potentially RCE. Version 4.14.3 fixes the issue. |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. Starting in version 3.9.0 and prior to version 4.14.3, multiple stack-based buffer overflows exist in the Security Configuration Assessment (SCA) decoder (`wazuh-analysisd`). The use of `sprintf` with a floating-point (`%lf`) format specifier on a fixed-size 128-byte buffer allows a remote attacker to overflow the stack. A specially crafted JSON event can trigger this overflow, leading to a denial of service (crash) or potential RCE on the Wazuh manager. The vulnerability is located in `/src/analysisd/decoders/security_configuration_assessment.c`, within the `FillScanInfo` and `FillCheckEventInfo` functions. In multiple locations, a 128-byte buffer (`char value[OS_SIZE_128];`) is allocated on the stack to hold the string representation of a number from a JSON event. The code checks if the number is an integer or a double. If it's a double, it uses `sprintf(value, "%lf", ...)` to perform the conversion. This `sprintf` call is unbounded. If a floating-point number with a large exponent (e.g., `1.0e150`) is provided, `sprintf` will attempt to write its full string representation (a "1" followed by 150 zeros), which is larger than the 128-byte buffer, corrupting the stack. Version 4.14.3 patches the issue. |
| The Add Custom Fields to Media plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 2.0.3. This is due to missing nonce validation on the field deletion functionality in the admin display template. The plugin properly validates a nonce for the 'add field' operation (line 24-36), but the 'delete field' operation (lines 38-49) processes the $_GET['delete'] parameter and calls update_option() without any nonce verification. This makes it possible for unauthenticated attackers to delete arbitrary custom media fields via a forged request, granted they can trick a site administrator into performing an action such as clicking on a link. |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. Starting in version 3.9.0 and prior to version 4.14.3, a privilege escalation vulnerability exists in the Wazuh Manager's cluster synchronization protocol. The `wazuh-clusterd` service allows authenticated nodes to write arbitrary files to the manager’s file system with the permissions of the `wazuh` system user. Due to insecure default permissions, the `wazuh` user has write access to the manager's main configuration file (`/var/ossec/etc/ossec.conf`). By leveraging the cluster protocol to overwrite `ossec.conf`, an attacker can inject a malicious `<localfile>` command block. The `wazuh-logcollector` service, which runs as root, parses this configuration and executes the injected command. This chain allows an attacker with cluster credentials to gain full Root Remote Code Execution, violating the principle of least privilege and bypassing the intended security model. Version 4.14.3 fixes the issue. |
| A vulnerability in the web-based management interface of Cisco Secure Firewall Management Center (FMC) Software could allow an unauthenticated, remote attacker to execute arbitrary Java code as root on an affected device.
This vulnerability is due to insecure deserialization of a user-supplied Java byte stream. An attacker could exploit this vulnerability by sending a crafted serialized Java object to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the device and elevate privileges to root.
Note: If the FMC management interface does not have public internet access, the attack surface that is associated with this vulnerability is reduced. |
| A flaw was found in libarchive. This heap out-of-bounds read vulnerability exists in the RAR archive processing logic due to improper validation of the LZSS sliding window size after transitions between compression methods. A remote attacker can exploit this by providing a specially crafted RAR archive, leading to the disclosure of sensitive heap memory information without requiring authentication or user interaction. |
| IBM QRadar SIEM 7.5.0 through 7.5.0 Update Package 14 is vulnerable to cross-site scripting. This vulnerability allows an authenticated user to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. |
| The Hytale Modding Wiki is a free service for Hytale mods to host their documentation & wikis. An Insecure Direct Object Reference (IDOR) vulnerability in versions of the wiki prior to 1.0.0 exposes mod authors' personal information - including full names and email addresses - to any authenticated user who visits a mod page. Any user who creates an account can access sensitive author details by simply navigating to a mod's page via its slug. Version 1.0.0 fixes the issue. |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to 9.6.0-alpha.21 and 8.6.45, an unauthenticated attacker can crash the Parse Server process by sending a single request with deeply nested query condition operators. This terminates the server and denies service to all connected clients. Starting in version 9.6.0-alpha.21 and 8.6.45, a depth limit for query condition operator nesting has been added via the `requestComplexity.queryDepth` server option. The option is disabled by default to avoid a breaking change. To mitigate, upgrade and set the option to a value appropriate for your app. No known workarounds are available. |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to 9.6.0-alpha.28 and 8.6.48, the password reset mechanism does not enforce single-use guarantees for reset tokens. When a user requests a password reset, the generated token can be consumed by multiple concurrent requests within a short time window. An attacker who has intercepted a password reset token can race the legitimate user's password reset request, causing both requests to succeed. This may result in the legitimate user believing their password was changed successfully while the attacker's password takes effect instead. All Parse Server deployments that use the password reset feature are affected. Starting in versions 9.6.0-alpha.28 and 8.6.48, the password reset token is now atomically validated and consumed as part of the password update operation. The database query that updates the password includes the reset token as a condition, ensuring that only one concurrent request can successfully consume the token. Subsequent requests using the same token will fail because the token has already been cleared. There is no known workaround other than upgrading. |
| BMC FootPrints ITSM versions 20.20.02 through 20.24.01.001 contain a deserialization of untrusted data vulnerability in the ASP.NET servlet's VIEWSTATE handling that allows authenticated attackers to execute arbitrary code. Attackers can supply crafted serialized objects to the VIEWSTATE parameter to achieve remote code execution and fully compromise the application. The following hotfixes remediate the vulnerability: 20.20.02, 20.20.03.002, 20.21.01.001, 20.21.02.002, 20.22.01, 20.22.01.001, 20.23.01, 20.23.01.002, and 20.24.01. |
| BMC FootPrints ITSM versions 20.20.02 through 20.24.01.001 contain a blind server-side request forgery vulnerability in the externalfeed/RSS API component that allows authenticated attackers to trigger arbitrary outbound requests from the server. Attackers can exploit insufficient validation of externally supplied resource references to interact with internal services or cause resource exhaustion impacting availability. The following hotfixes remediate the vulnerability: 20.20.02, 20.20.03.002, 20.21.01.001, 20.21.02.002, 20.22.01, 20.22.01.001, 20.23.01, 20.23.01.002, and 20.24.01. |
| BMC FootPrints ITSM versions 20.20.02 through 20.24.01.001 contain a blind server-side request forgery vulnerability in the searchWeb API component that allows authenticated attackers to cause the server to initiate arbitrary outbound requests. Attackers can exploit improper URL validation to perform internal network scanning or interact with internal services, impacting system availability. The following hotfixes remediate the vulnerability: 20.20.02, 20.20.03.002, 20.21.01.001, 20.21.02.002, 20.22.01, 20.22.01.001, 20.23.01, 20.23.01.002, and 20.24.01. |
