| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OOM Denial of Service via Unbounded Array Allocation in Apache OpenNLP AbstractModelReader
Versions Affected:
before 2.5.9
before 3.0.0-M3
Description:
The AbstractModelReader methods getOutcomes(), getOutcomePatterns(), and getPredicates() each read a 32-bit signed integer count field from a binary model stream and pass that value directly to an array allocation (new String[numOutcomes], new int[numOCTypes][], new String[NUM_PREDS]) without validating that the value is non-negative or within a reasonable bound. The count is therefore fully attacker-controlled when the model file originates from an untrusted source.
A crafted .bin model file in which any of these count fields is set to Integer.MAX_VALUE (or any value large enough to exhaust the available heap) triggers an OutOfMemoryError at the array allocation itself, before the corresponding label or pattern data is consumed from the stream. The error occurs very early in deserialization: for a GIS model, getOutcomes() is reached after only the model-type string, the correction constant, and the correction parameter have been read; so the attacker pays no meaningful size cost to weaponize a payload, and a single small file can crash a JVM that loads it. Any code path that deserializes a .bin model is affected, including direct use of GenericModelReader and any higher-level component that delegates to it during model load.
The practical impact is denial of service against processes that load model files from untrusted or semi-trusted origins.
Mitigation:
* 2.x users should upgrade to 2.5.9.
* 3.x users should upgrade to 3.0.0-M3.
Note: The fix introduces an upper bound on each of the three count fields, checked before array allocation; counts that are negative or exceed the bound cause an IllegalArgumentException to be thrown and the read to fail fast with no large allocation. The default bound is 10,000,000, which is well above the entry counts of legitimate OpenNLP models but far below any value that would threaten heap exhaustion. Deployments that legitimately need to load models with more entries than the default can raise the limit at JVM startup by setting the OPENNLP_MAX_ENTRIES system property to the desired positive integer (e.g. -DOPENNLP_MAX_ENTRIES=50000000); invalid or non-positive values fall back to the default.
Users who cannot upgrade immediately should treat all .bin model files as untrusted input unless their provenance is verified, and should avoid loading models supplied by end users or fetched from third-party repositories without integrity checks. |
| A security vulnerability has been detected in code-projects BloodBank Managing System 1.0. The affected element is an unknown function of the file get_state.php. The manipulation of the argument G_STATE_ID leads to sql injection. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. |
| A vulnerability was detected in code-projects BloodBank Managing System 1.0. The impacted element is an unknown function of the file request_blood.php. The manipulation results in unrestricted upload. The attack can be executed remotely. The exploit is now public and may be used. |
| Memory corruption while processing IOCTL command when device is in power-save state. |
| A logic error in the split utility of uutils coreutils causes the corruption of output filenames when provided with non-UTF-8 prefix or suffix inputs. The implementation utilizes to_string_lossy() when constructing chunk filenames, which automatically rewrites invalid byte sequences into the UTF-8 replacement character (U+FFFD). This behavior diverges from GNU split, which preserves raw pathname bytes intact. In environments utilizing non-UTF-8 encodings, this vulnerability leads to the creation of files with incorrect names, potentially causing filename collisions, broken automation, or the misdirection of output data. |
| WDR201A WiFi Extender (HW V2.1, FW LFMZX28040922V1.02) contains an OS command injection vulnerability in the makeRequest.cgi binary that allows unauthenticated remote attackers to execute arbitrary shell commands by injecting malicious input into the set_time or StartSniffer functions. Attackers can craft a POST request with specially crafted ampersand-delimited parameters to bypass input sanitization and execute commands with a maximum length of 31 bytes through the date command or channel parameter processing. |
| WDR201A WiFi Extender (HW V2.1, FW LFMZX28040922V1.02) contains an OS command injection vulnerability in the internet.cgi binary that allows unauthenticated remote attackers to execute arbitrary shell commands by injecting malicious input into the gateway POST parameter. Attackers can exploit unsanitized parameter concatenation in the set_add_routing function to inject shell commands that are executed via popen() with partial output reflected in the HTTP response. |
| A Time-of-Check to Time-of-Use (TOCTOU) vulnerability exists in the chcon utility of uutils coreutils during recursive operations. The implementation resolves recursive targets using a fresh path lookup (via fts_accpath) rather than binding the traversal and label application to the specific directory state encountered during traversal. Because these operations are not anchored to file descriptors, a local attacker with write access to a directory tree can exploit timing-sensitive rename or symbolic link races to redirect a privileged recursive relabeling operation to unintended files or directories. This vulnerability breaks the hardening expectations for SELinux administration workflows and can lead to the unauthorized modification of security labels on sensitive system objects. |
| vm2 is an open source vm/sandbox for Node.js. Prior to version 3.11.0, SuppressedError allows attackers to escape the sandbox and run arbitrary code. This issue has been patched in version 3.11.0. |
| WDR201A WiFi Extender (HW V2.1, FW LFMZX28040922V1.02) contains an OS command injection vulnerability in the wireless.cgi binary that allow unauthenticated remote attackers to execute arbitrary shell commands by injecting malicious input into the sz11gChannel or PIN POST parameters. Attackers can exploit unsanitized parameter handling in the set_wifi_basic and set_wifi_do_wps functions to achieve remote code execution without authentication. |
| The cp utility in uutils coreutils, when performing recursive copies (-R), incorrectly treats character and block device nodes as stream sources rather than preserving them. Because the implementation reads bytes into regular files at the destination instead of using mknod, device semantics are destroyed (e.g., /dev/null becomes a regular file). This behavior can lead to runtime denial of service through disk exhaustion or process hangs when reading from unbounded device nodes. |
| vm2 is an open source vm/sandbox for Node.js. In version 3.10.4, vm2 is vulnerable to full sandbox escape with arbitrary code execution. Attacker code inside VM.run() obtains host process object and runs host commands with zero host cooperation. This issue has been patched in version 3.10.5. |
| Buffer overflow due to incorrect authorization in PLC FW |
| XML External Entity (XXE) via Unsanitized Dictionary Parsing in Apache OpenNLP DictionaryEntryPersistor
Versions Affected: before 2.5.9, before 3.0.0-M3
Description: The DictionaryEntryPersistor class initializes a static SAXParserFactory at class-load time without enabling FEATURE_SECURE_PROCESSING or disabling DTD processing. When create(InputStream, EntryInserter) is invoked, the only feature set on the XMLReader is namespace support — external entity resolution and DOCTYPE declarations remain fully enabled. An attacker who can supply a crafted dictionary file (e.g., a stop-word list or domain dictionary) containing a malicious DOCTYPE declaration can trigger local file disclosure via file:// entity references or server-side request forgery via http:// entity references during SAX parsing, before the application processes a single dictionary entry. This is inconsistent with the project's own XmlUtil.createSaxParser() helper, which correctly sets FEATURE_SECURE_PROCESSING and disallow-doctype-decl and is used by all other XML parsing paths in the codebase. The public Dictionary(InputStream) constructor delegates directly to this method and is the documented API for loading user-supplied dictionaries, making untrusted input a realistic scenario.
Mitigation: 2.x users should upgrade to 2.5.9. 3.x users should upgrade to 3.0.0-M3. Users who cannot upgrade immediately should ensure that all dictionary files are sourced from trusted origins and should consider wrapping the Dictionary(InputStream) constructor with input validation that rejects any XML containing a DOCTYPE declaration before it reaches the parser. |
| OpenC3 COSMOS provides the functionality needed to send commands to and receive data from one or more embedded systems. Prior to versions 6.10.5 and 7.0.0-rc3, OpenC3 COSMOS contains a design flaw in the save_tool_config() function that allows saving tool configuration files at arbitrary locations inside the shared /plugins directory tree by supplying crafted configuration filenames. Although the implementation sufficiently mitigates standard path traversal attacks, by canonicalizing filename to an absolute path, all plugins share this same root directory. That enables users to create arbitrary file structures and overwrite existing configuration files within the shared /plugins directory. This issue has been patched in versions 6.10.5 and 7.0.0-rc3. |
| Description:
Improper Control of Generation of Code ('Code Injection') vulnerability in Apache Atlas
Apache Atlas exposes a DSL search endpoint that accepts user-supplied query strings. Attacker can alter Gremlin traversal logic within grammar-allowed characters to access unintended data
Affect Version:
This issue affects Apache Atlas: from 0.8 through 2.4.0.
For the affect version >= 2.0, vulnerability is only when Atlas is deployed with below non-default configuration.
atlas.dsl.executor.traversal=false
Mitigation:
Users are recommended to upgrade to version 2.5.0, which fixes the issue. |
| CVE-2026-40951 is a memory corruption vulnerability on Secure Access
Windows clients prior to 14.50. Attackers with local control of the
Windows client can send malformed data to an API and trigger a denial of
service. |
| The mv utility in uutils coreutils improperly handles directory trees containing symbolic links during moves across filesystem boundaries. Instead of preserving symlinks, the implementation expands them, copying the linked targets as real files or directories at the destination. This can lead to resource exhaustion (disk space or time) if symlinks point to large external directories, unexpected duplication of sensitive data into unintended locations, or infinite recursion and repeated copying in the presence of symlink loops. |
| The printenv utility in uutils coreutils fails to display environment variables containing invalid UTF-8 byte sequences. While POSIX permits arbitrary bytes in environment strings, the uutils implementation silently skips these entries rather than printing the raw bytes. This vulnerability allows malicious environment variables (e.g., adversarial LD_PRELOAD values) to evade inspection by administrators or security auditing tools, potentially allowing library injection or other environment-based attacks to go undetected. |
| An argument parsing error in the kill utility of uutils coreutils incorrectly interprets kill -1 as a request to send the default signal (SIGTERM) to PID -1. Sending a signal to PID -1 causes the kernel to terminate all processes visible to the caller, potentially leading to a system crash or massive process termination. This differs from GNU coreutils, which correctly recognizes -1 as a signal number in this context and would instead report a missing PID argument. |
