| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: tcp - fix packet extraction from stream
When processing TCP stream data in ovpn_tcp_recv, we receive large
cloned skbs from __strp_rcv that may contain multiple coalesced packets.
The current implementation has two bugs:
1. Header offset overflow: Using pskb_pull with large offsets on
coalesced skbs causes skb->data - skb->head to exceed the u16 storage
of skb->network_header. This causes skb_reset_network_header to fail
on the inner decapsulated packet, resulting in packet drops.
2. Unaligned protocol headers: Extracting packets from arbitrary
positions within the coalesced TCP stream provides no alignment
guarantees for the packet data causing performance penalties on
architectures without efficient unaligned access. Additionally,
openvpn's 2-byte length prefix on TCP packets causes the subsequent
4-byte opcode and packet ID fields to be inherently misaligned.
Fix both issues by allocating a new skb for each openvpn packet and
using skb_copy_bits to extract only the packet content into the new
buffer, skipping the 2-byte length prefix. Also, check the length before
invoking the function that performs the allocation to avoid creating an
invalid skb.
If the packet has to be forwarded to userspace the 2-byte prefix can be
pushed to the head safely, without misalignment.
As a side effect, this approach also avoids the expensive linearization
that pskb_pull triggers on cloned skbs with page fragments. In testing,
this resulted in TCP throughput improvements of up to 74%. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: move wait_on_sem() out of spinlock
With iommu.strict=1, the existing completion wait path can cause soft
lockups under stressed environment, as wait_on_sem() busy-waits under the
spinlock with interrupts disabled.
Move the completion wait in iommu_completion_wait() out of the spinlock.
wait_on_sem() only polls the hardware-updated cmd_sem and does not require
iommu->lock, so holding the lock during the busy wait unnecessarily
increases contention and extends the time with interrupts disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: in-kernel: always set ID as avail when rm endp
Syzkaller managed to find a combination of actions that was generating
this warning:
WARNING: net/mptcp/pm_kernel.c:1074 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline], CPU#1: syz.7.48/2535
WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline], CPU#1: syz.7.48/2535
WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline], CPU#1: syz.7.48/2535
WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538, CPU#1: syz.7.48/2535
Modules linked in:
CPU: 1 UID: 0 PID: 2535 Comm: syz.7.48 Not tainted 6.18.0-03987-gea5f5e676cf5 #17 PREEMPT(voluntary)
Hardware name: QEMU Ubuntu 25.10 PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline]
RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline]
RIP: 0010:mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline]
RIP: 0010:mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538
Code: 89 c7 e8 c5 8c 73 fe e9 f7 fd ff ff 49 83 ef 80 e8 b7 8c 73 fe 4c 89 ff be 03 00 00 00 e8 4a 29 e3 fe eb ac e8 a3 8c 73 fe 90 <0f> 0b 90 e9 3d ff ff ff e8 95 8c 73 fe b8 a1 ff ff ff eb 1a e8 89
RSP: 0018:ffffc9001535b820 EFLAGS: 00010287
netdevsim0: tun_chr_ioctl cmd 1074025677
RAX: ffffffff82da294d RBX: 0000000000000001 RCX: 0000000000080000
RDX: ffffc900096d0000 RSI: 00000000000006d6 RDI: 00000000000006d7
netdevsim0: linktype set to 823
RBP: ffff88802cdb2240 R08: 00000000000104ae R09: ffffffffffffffff
R10: ffffffff82da27d4 R11: 0000000000000000 R12: 0000000000000000
R13: ffff88801246d8c0 R14: ffffc9001535b8b8 R15: ffff88802cdb1800
FS: 00007fc6ac5a76c0(0000) GS:ffff8880f90c8000(0000) knlGS:0000000000000000
netlink: 'syz.3.50': attribute type 5 has an invalid length.
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
netlink: 1232 bytes leftover after parsing attributes in process `syz.3.50'.
CR2: 0000200000010000 CR3: 0000000025b1a000 CR4: 0000000000350ef0
Call Trace:
<TASK>
mptcp_pm_set_flags net/mptcp/pm_netlink.c:277 [inline]
mptcp_pm_nl_set_flags_doit+0x1d7/0x210 net/mptcp/pm_netlink.c:282
genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x4ab/0x5b0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:718 [inline]
__sock_sendmsg+0xc9/0xf0 net/socket.c:733
____sys_sendmsg+0x272/0x3b0 net/socket.c:2608
___sys_sendmsg+0x2de/0x320 net/socket.c:2662
__sys_sendmsg net/socket.c:2694 [inline]
__do_sys_sendmsg net/socket.c:2699 [inline]
__se_sys_sendmsg net/socket.c:2697 [inline]
__x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2697
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xed/0x360 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc6adb66f6d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fc6ac5a6ff8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fc6addf5fa0 RCX: 00007fc6adb66f6d
RDX: 0000000000048084 RSI: 00002000000002c0 RDI: 000000000000000e
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
HID: prodikeys: Check presence of pm->input_ep82
Fake USB devices can send their own report descriptors for which the
input_mapping() hook does not get called. In this case, pm->input_ep82 stays
NULL, which leads to a crash later.
This does not happen with the real device, but can be provoked by imposing as
one. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke()
The ChipIdea UDC driver can encounter "not page aligned sg buffer"
errors when a USB device is reconnected after being disconnected
during an active transfer. This occurs because _ep_nuke() returns
requests to the gadget layer without properly unmapping DMA buffers
or cleaning up scatter-gather bounce buffers.
Root cause:
When a disconnect happens during a multi-segment DMA transfer, the
request's num_mapped_sgs field and sgt.sgl pointer remain set with
stale values. The request is returned to the gadget driver with status
-ESHUTDOWN but still has active DMA state. If the gadget driver reuses
this request on reconnect without reinitializing it, the stale DMA
state causes _hardware_enqueue() to skip DMA mapping (seeing non-zero
num_mapped_sgs) and attempt to use freed/invalid DMA addresses,
leading to alignment errors and potential memory corruption.
The normal completion path via _hardware_dequeue() properly calls
usb_gadget_unmap_request_by_dev() and sglist_do_debounce() before
returning the request. The _ep_nuke() path must do the same cleanup
to ensure requests are returned in a clean, reusable state.
Fix:
Add DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirror
the cleanup sequence in _hardware_dequeue():
- Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set
- Call sglist_do_debounce() with copy=false if bounce buffer exists
This ensures that when requests are returned due to endpoint shutdown,
they don't retain stale DMA mappings. The 'false' parameter to
sglist_do_debounce() prevents copying data back (appropriate for
shutdown path where transfer was aborted). |
| In the Linux kernel, the following vulnerability has been resolved:
9p/xen: protect xen_9pfs_front_free against concurrent calls
The xenwatch thread can race with other back-end change notifications
and call xen_9pfs_front_free() twice, hitting the observed general
protection fault due to a double-free. Guard the teardown path so only
one caller can release the front-end state at a time, preventing the
crash.
This is a fix for the following double-free:
[ 27.052347] Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 27.052357] CPU: 0 UID: 0 PID: 32 Comm: xenwatch Not tainted 6.18.0-02087-g51ab33fc0a8b-dirty #60 PREEMPT(none)
[ 27.052363] RIP: e030:xen_9pfs_front_free+0x1d/0x150
[ 27.052368] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 41 55 41 54 55 48 89 fd 48 c7 c7 48 d0 92 85 53 e8 cb cb 05 00 48 8b 45 08 48 8b 55 00 <48> 3b 28 0f 85 f9 28 35 fe 48 3b 6a 08 0f 85 ef 28 35 fe 48 89 42
[ 27.052377] RSP: e02b:ffffc9004016fdd0 EFLAGS: 00010246
[ 27.052381] RAX: 6b6b6b6b6b6b6b6b RBX: ffff88800d66e400 RCX: 0000000000000000
[ 27.052385] RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000000 RDI: 0000000000000000
[ 27.052389] RBP: ffff88800a887040 R08: 0000000000000000 R09: 0000000000000000
[ 27.052393] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888009e46b68
[ 27.052397] R13: 0000000000000200 R14: 0000000000000000 R15: ffff88800a887040
[ 27.052404] FS: 0000000000000000(0000) GS:ffff88808ca57000(0000) knlGS:0000000000000000
[ 27.052408] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 27.052412] CR2: 00007f9714004360 CR3: 0000000004834000 CR4: 0000000000050660
[ 27.052418] Call Trace:
[ 27.052420] <TASK>
[ 27.052422] xen_9pfs_front_changed+0x5d5/0x720
[ 27.052426] ? xenbus_otherend_changed+0x72/0x140
[ 27.052430] ? __pfx_xenwatch_thread+0x10/0x10
[ 27.052434] xenwatch_thread+0x94/0x1c0
[ 27.052438] ? __pfx_autoremove_wake_function+0x10/0x10
[ 27.052442] kthread+0xf8/0x240
[ 27.052445] ? __pfx_kthread+0x10/0x10
[ 27.052449] ? __pfx_kthread+0x10/0x10
[ 27.052452] ret_from_fork+0x16b/0x1a0
[ 27.052456] ? __pfx_kthread+0x10/0x10
[ 27.052459] ret_from_fork_asm+0x1a/0x30
[ 27.052463] </TASK>
[ 27.052465] Modules linked in:
[ 27.052471] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: move vdpa group bound check to vhost_vdpa
Remove duplication by consolidating these here. This reduces the
posibility of a parent driver missing them.
While we're at it, fix a bug in vdpa_sim where a valid ASID can be
assigned to a group equal to ngroups, causing an out of bound write. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Fix SError of kernel panic when closed
SError of kernel panic rarely happened while testing fluster.
The root cause was to enter suspend mode because timeout of autosuspend
delay happened.
[ 48.834439] SError Interrupt on CPU0, code 0x00000000bf000000 -- SError
[ 48.834455] CPU: 0 UID: 0 PID: 1067 Comm: v4l2h265dec0:sr Not tainted 6.12.9-gc9e21a1ebd75-dirty #7
[ 48.834461] Hardware name: ti Texas Instruments J721S2 EVM/Texas Instruments J721S2 EVM, BIOS 2025.01-00345-gbaf3aaa8ecfa 01/01/2025
[ 48.834464] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 48.834468] pc : wave5_dec_clr_disp_flag+0x40/0x80 [wave5]
[ 48.834488] lr : wave5_dec_clr_disp_flag+0x40/0x80 [wave5]
[ 48.834495] sp : ffff8000856e3a30
[ 48.834497] x29: ffff8000856e3a30 x28: ffff0008093f6010 x27: ffff000809158130
[ 48.834504] x26: 0000000000000000 x25: ffff00080b625000 x24: ffff000804a9ba80
[ 48.834509] x23: ffff000802343028 x22: ffff000809158150 x21: ffff000802218000
[ 48.834513] x20: ffff0008093f6000 x19: ffff0008093f6000 x18: 0000000000000000
[ 48.834518] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff74009618
[ 48.834523] x14: 000000010000000c x13: 0000000000000000 x12: 0000000000000000
[ 48.834527] x11: ffffffffffffffff x10: ffffffffffffffff x9 : ffff000802343028
[ 48.834532] x8 : ffff00080b6252a0 x7 : 0000000000000038 x6 : 0000000000000000
[ 48.834536] x5 : ffff00080b625060 x4 : 0000000000000000 x3 : 0000000000000000
[ 48.834541] x2 : 0000000000000000 x1 : ffff800084bf0118 x0 : ffff800084bf0000
[ 48.834547] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 48.834549] CPU: 0 UID: 0 PID: 1067 Comm: v4l2h265dec0:sr Not tainted 6.12.9-gc9e21a1ebd75-dirty #7
[ 48.834554] Hardware name: ti Texas Instruments J721S2 EVM/Texas Instruments J721S2 EVM, BIOS 2025.01-00345-gbaf3aaa8ecfa 01/01/2025
[ 48.834556] Call trace:
[ 48.834559] dump_backtrace+0x94/0xec
[ 48.834574] show_stack+0x18/0x24
[ 48.834579] dump_stack_lvl+0x38/0x90
[ 48.834585] dump_stack+0x18/0x24
[ 48.834588] panic+0x35c/0x3e0
[ 48.834592] nmi_panic+0x40/0x8c
[ 48.834595] arm64_serror_panic+0x64/0x70
[ 48.834598] do_serror+0x3c/0x78
[ 48.834601] el1h_64_error_handler+0x34/0x4c
[ 48.834605] el1h_64_error+0x64/0x68
[ 48.834608] wave5_dec_clr_disp_flag+0x40/0x80 [wave5]
[ 48.834615] wave5_vpu_dec_clr_disp_flag+0x54/0x80 [wave5]
[ 48.834622] wave5_vpu_dec_buf_queue+0x19c/0x1a0 [wave5]
[ 48.834628] __enqueue_in_driver+0x3c/0x74 [videobuf2_common]
[ 48.834639] vb2_core_qbuf+0x508/0x61c [videobuf2_common]
[ 48.834646] vb2_qbuf+0xa4/0x168 [videobuf2_v4l2]
[ 48.834656] v4l2_m2m_qbuf+0x80/0x238 [v4l2_mem2mem]
[ 48.834666] v4l2_m2m_ioctl_qbuf+0x18/0x24 [v4l2_mem2mem]
[ 48.834673] v4l_qbuf+0x48/0x5c [videodev]
[ 48.834704] __video_do_ioctl+0x180/0x3f0 [videodev]
[ 48.834725] video_usercopy+0x2ec/0x68c [videodev]
[ 48.834745] video_ioctl2+0x18/0x24 [videodev]
[ 48.834766] v4l2_ioctl+0x40/0x60 [videodev]
[ 48.834786] __arm64_sys_ioctl+0xa8/0xec
[ 48.834793] invoke_syscall+0x44/0x100
[ 48.834800] el0_svc_common.constprop.0+0xc0/0xe0
[ 48.834804] do_el0_svc+0x1c/0x28
[ 48.834809] el0_svc+0x30/0xd0
[ 48.834813] el0t_64_sync_handler+0xc0/0xc4
[ 48.834816] el0t_64_sync+0x190/0x194
[ 48.834820] SMP: stopping secondary CPUs
[ 48.834831] Kernel Offset: disabled
[ 48.834833] CPU features: 0x08,00002002,80200000,4200421b
[ 48.834837] Memory Limit: none
[ 49.161404] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c/tw9906: Fix potential memory leak in tw9906_probe()
In one of the error paths in tw9906_probe(), the memory allocated in
v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that
by calling v4l2_ctrl_handler_free() on the handler in that error path. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: ->d_compare() must not block
... so don't use __getname() there. Switch it (and ntfs_d_hash(), while
we are at it) to kmalloc(PATH_MAX, GFP_NOWAIT). Yes, ntfs_d_hash()
almost certainly can do with smaller allocations, but let ntfs folks
deal with that - keep the allocation size as-is for now.
Stop abusing names_cachep in ntfs, period - various uses of that thing
in there have nothing to do with pathnames; just use k[mz]alloc() and
be done with that. For now let's keep sizes as-in, but AFAICS none of
the users actually want PATH_MAX. |
| In the Linux kernel, the following vulnerability has been resolved:
kcm: fix zero-frag skb in frag_list on partial sendmsg error
Syzkaller reported a warning in kcm_write_msgs() when processing a
message with a zero-fragment skb in the frag_list.
When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb,
it allocates a new skb (tskb) and links it into the frag_list before
copying data. If the copy subsequently fails (e.g. -EFAULT from
user memory), tskb remains in the frag_list with zero fragments:
head skb (msg being assembled, NOT yet in sk_write_queue)
+-----------+
| frags[17] | (MAX_SKB_FRAGS, all filled with data)
| frag_list-+--> tskb
+-----------+ +----------+
| frags[0] | (empty! copy failed before filling)
+----------+
For SOCK_SEQPACKET with partial data already copied, the error path
saves this message via partial_message for later completion. For
SOCK_SEQPACKET, sock_write_iter() automatically sets MSG_EOR, so a
subsequent zero-length write(fd, NULL, 0) completes the message and
queues it to sk_write_queue. kcm_write_msgs() then walks the
frag_list and hits:
WARN_ON(!skb_shinfo(skb)->nr_frags)
TCP has a similar pattern where skbs are enqueued before data copy
and cleaned up on failure via tcp_remove_empty_skb(). KCM was
missing the equivalent cleanup.
Fix this by tracking the predecessor skb (frag_prev) when allocating
a new frag_list entry. On error, if the tail skb has zero frags,
use frag_prev to unlink and free it in O(1) without walking the
singly-linked frag_list. frag_prev is safe to dereference because
the entire message chain is only held locally (or in kcm->seq_skb)
and is not added to sk_write_queue until MSG_EOR, so the send path
cannot free it underneath us.
Also change the WARN_ON to WARN_ON_ONCE to avoid flooding the log
if the condition is somehow hit repeatedly.
There are currently no KCM selftests in the kernel tree; a simple
reproducer is available at [1].
[1] https://gist.github.com/mrpre/a94d431c757e8d6f168f4dd1a3749daa |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add signal type check for dcn401 get_phyd32clk_src
Trying to access link enc on a dpia link will cause a crash otherwise |
| In the Linux kernel, the following vulnerability has been resolved:
soc: ti: k3-socinfo: Fix regmap leak on probe failure
The mmio regmap allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds access
Number of MW LUTs depends on NTB configuration and can be set to MAX_MWS,
This patch protects against invalid index out of bounds access to mw_sizes
When invalid access print message to user that configuration is not valid. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kexec: add a sanity check on previous kernel's ima kexec buffer
When the second-stage kernel is booted via kexec with a limiting command
line such as "mem=<size>", the physical range that contains the carried
over IMA measurement list may fall outside the truncated RAM leading to a
kernel panic.
BUG: unable to handle page fault for address: ffff97793ff47000
RIP: ima_restore_measurement_list+0xdc/0x45a
#PF: error_code(0x0000) – not-present page
Other architectures already validate the range with page_is_ram(), as done
in commit cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer
against memory bounds") do a similar check on x86.
Without carrying the measurement list across kexec, the attestation
would fail. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: prevent races in ->query_interfaces()
It was possible for two query interface works to be concurrently trying
to update the interfaces.
Prevent this by checking and updating iface_last_update under
iface_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_skbedit: fix divide-by-zero in tcf_skbedit_hash()
Commit 38a6f0865796 ("net: sched: support hash selecting tx queue")
added SKBEDIT_F_TXQ_SKBHASH support. The inclusive range size is
computed as:
mapping_mod = queue_mapping_max - queue_mapping + 1;
The range size can be 65536 when the requested range covers all possible
u16 queue IDs (e.g. queue_mapping=0 and queue_mapping_max=U16_MAX).
That value cannot be represented in a u16 and previously wrapped to 0,
so tcf_skbedit_hash() could trigger a divide-by-zero:
queue_mapping += skb_get_hash(skb) % params->mapping_mod;
Compute mapping_mod in a wider type and reject ranges larger than U16_MAX
to prevent params->mapping_mod from becoming 0 and avoid the crash. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Refactor amdgpu_gem_va_ioctl for Handling Last Fence Update and Timeline Management v4
This commit simplifies the amdgpu_gem_va_ioctl function, key updates
include:
- Moved the logic for managing the last update fence directly into
amdgpu_gem_va_update_vm.
- Introduced checks for the timeline point to enable conditional
replacement or addition of fences.
v2: Addressed review comments from Christian.
v3: Updated comments (Christian).
v4: The previous version selected the fence too early and did not manage its
reference correctly, which could lead to stale or freed fences being used.
This resulted in refcount underflows and could crash when updating GPU
timelines.
The fence is now chosen only after the VA mapping work is completed, and its
reference is taken safely. After exporting it to the VM timeline syncobj, the
driver always drops its local fence reference, ensuring balanced refcounting
and avoiding use-after-free on dma_fence.
Crash signature:
[ 205.828135] refcount_t: underflow; use-after-free.
[ 205.832963] WARNING: CPU: 30 PID: 7274 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
...
[ 206.074014] Call Trace:
[ 206.076488] <TASK>
[ 206.078608] amdgpu_gem_va_ioctl+0x6ea/0x740 [amdgpu]
[ 206.084040] ? __pfx_amdgpu_gem_va_ioctl+0x10/0x10 [amdgpu]
[ 206.089994] drm_ioctl_kernel+0x86/0xe0 [drm]
[ 206.094415] drm_ioctl+0x26e/0x520 [drm]
[ 206.098424] ? __pfx_amdgpu_gem_va_ioctl+0x10/0x10 [amdgpu]
[ 206.104402] amdgpu_drm_ioctl+0x4b/0x80 [amdgpu]
[ 206.109387] __x64_sys_ioctl+0x96/0xe0
[ 206.113156] do_syscall_64+0x66/0x2d0
...
[ 206.553351] BUG: unable to handle page fault for address: ffffffffc0dfde90
...
[ 206.553378] RIP: 0010:dma_fence_signal_timestamp_locked+0x39/0xe0
...
[ 206.553405] Call Trace:
[ 206.553409] <IRQ>
[ 206.553415] ? __pfx_drm_sched_fence_free_rcu+0x10/0x10 [gpu_sched]
[ 206.553424] dma_fence_signal+0x30/0x60
[ 206.553427] drm_sched_job_done.isra.0+0x123/0x150 [gpu_sched]
[ 206.553434] dma_fence_signal_timestamp_locked+0x6e/0xe0
[ 206.553437] dma_fence_signal+0x30/0x60
[ 206.553441] amdgpu_fence_process+0xd8/0x150 [amdgpu]
[ 206.553854] sdma_v4_0_process_trap_irq+0x97/0xb0 [amdgpu]
[ 206.554353] edac_mce_amd(E) ee1004(E)
[ 206.554270] amdgpu_irq_dispatch+0x150/0x230 [amdgpu]
[ 206.554702] amdgpu_ih_process+0x6a/0x180 [amdgpu]
[ 206.555101] amdgpu_irq_handler+0x23/0x60 [amdgpu]
[ 206.555500] __handle_irq_event_percpu+0x4a/0x1c0
[ 206.555506] handle_irq_event+0x38/0x80
[ 206.555509] handle_edge_irq+0x92/0x1e0
[ 206.555513] __common_interrupt+0x3e/0xb0
[ 206.555519] common_interrupt+0x80/0xa0
[ 206.555525] </IRQ>
[ 206.555527] <TASK>
...
[ 206.555650] RIP: 0010:dma_fence_signal_timestamp_locked+0x39/0xe0
...
[ 206.555667] Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
drm/atmel-hlcdc: fix use-after-free of drm_crtc_commit after release
The atmel_hlcdc_plane_atomic_duplicate_state() callback was copying
the atmel_hlcdc_plane state structure without properly duplicating the
drm_plane_state. In particular, state->commit remained set to the old
state commit, which can lead to a use-after-free in the next
drm_atomic_commit() call.
Fix this by calling
__drm_atomic_helper_duplicate_plane_state(), which correctly clones
the base drm_plane_state (including the ->commit pointer).
It has been seen when closing and re-opening the device node while
another DRM client (e.g. fbdev) is still attached:
=============================================================================
BUG kmalloc-64 (Not tainted): Poison overwritten
-----------------------------------------------------------------------------
0xc611b344-0xc611b344 @offset=836. First byte 0x6a instead of 0x6b
FIX kmalloc-64: Restoring Poison 0xc611b344-0xc611b344=0x6b
Allocated in drm_atomic_helper_setup_commit+0x1e8/0x7bc age=178 cpu=0
pid=29
drm_atomic_helper_setup_commit+0x1e8/0x7bc
drm_atomic_helper_commit+0x3c/0x15c
drm_atomic_commit+0xc0/0xf4
drm_framebuffer_remove+0x4cc/0x5a8
drm_mode_rmfb_work_fn+0x6c/0x80
process_one_work+0x12c/0x2cc
worker_thread+0x2a8/0x400
kthread+0xc0/0xdc
ret_from_fork+0x14/0x28
Freed in drm_atomic_helper_commit_hw_done+0x100/0x150 age=8 cpu=0
pid=169
drm_atomic_helper_commit_hw_done+0x100/0x150
drm_atomic_helper_commit_tail+0x64/0x8c
commit_tail+0x168/0x18c
drm_atomic_helper_commit+0x138/0x15c
drm_atomic_commit+0xc0/0xf4
drm_atomic_helper_set_config+0x84/0xb8
drm_mode_setcrtc+0x32c/0x810
drm_ioctl+0x20c/0x488
sys_ioctl+0x14c/0xc20
ret_fast_syscall+0x0/0x54
Slab 0xef8bc360 objects=21 used=16 fp=0xc611b7c0
flags=0x200(workingset|zone=0)
Object 0xc611b340 @offset=832 fp=0xc611b7c0 |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: Add missing platform data entries for SM8750
Two platform-data fields for SM8750 were missed:
- get_vpu_buffer_size = iris_vpu33_buf_size
Without this, the driver fails to allocate the required internal
buffers, leading to basic decode/encode failures during session
bring-up.
- max_core_mbps = ((7680 * 4320) / 256) * 60
Without this capability exposed, capability checks are incomplete and
v4l2-compliance for encoder fails. |
