| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: rivafb: fix divide error in nv3_arb()
A userspace program can trigger the RIVA NV3 arbitration code by calling
the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver
recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz
(derived from the PRAMDAC MCLK PLL) as a divisor without validating it
first.
In a normal setup, state->mclk_khz is provided by the real hardware and is
non-zero. However, an attacker can construct a malicious or misconfigured
device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL
configuration, causing state->mclk_khz to become zero. Once
nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns
calculation causes a divide error and crashes the kernel.
Fix this by checking whether state->mclk_khz is zero and bailing out before
doing the division.
The following log reveals it:
rivafb: setting virtual Y resolution to 2184
divide error: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline]
RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546
Call Trace:
nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603
nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline]
CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246
riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779
rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196
fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033
do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109
fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188
__x64_sys_ioctl+0x122/0x190 fs/ioctl.c:856 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix IS_CHECKPOINTED flag inconsistency issue caused by concurrent atomic commit and checkpoint writes
During SPO tests, when mounting F2FS, an -EINVAL error was returned from
f2fs_recover_inode_page. The issue occurred under the following scenario
Thread A Thread B
f2fs_ioc_commit_atomic_write
- f2fs_do_sync_file // atomic = true
- f2fs_fsync_node_pages
: last_folio = inode folio
: schedule before folio_lock(last_folio) f2fs_write_checkpoint
- block_operations// writeback last_folio
- schedule before f2fs_flush_nat_entries
: set_fsync_mark(last_folio, 1)
: set_dentry_mark(last_folio, 1)
: folio_mark_dirty(last_folio)
- __write_node_folio(last_folio)
: f2fs_down_read(&sbi->node_write)//block
- f2fs_flush_nat_entries
: {struct nat_entry}->flag |= BIT(IS_CHECKPOINTED)
- unblock_operations
: f2fs_up_write(&sbi->node_write)
f2fs_write_checkpoint//return
: f2fs_do_write_node_page()
f2fs_ioc_commit_atomic_write//return
SPO
Thread A calls f2fs_need_dentry_mark(sbi, ino), and the last_folio has
already been written once. However, the {struct nat_entry}->flag did not
have the IS_CHECKPOINTED set, causing set_dentry_mark(last_folio, 1) and
write last_folio again after Thread B finishes f2fs_write_checkpoint.
After SPO and reboot, it was detected that {struct node_info}->blk_addr
was not NULL_ADDR because Thread B successfully write the checkpoint.
This issue only occurs in atomic write scenarios. For regular file
fsync operations, the folio must be dirty. If
block_operations->f2fs_sync_node_pages successfully submit the folio
write, this path will not be executed. Otherwise, the
f2fs_write_checkpoint will need to wait for the folio write submission
to complete, as sbi->nr_pages[F2FS_DIRTY_NODES] > 0. Therefore, the
situation where f2fs_need_dentry_mark checks that the {struct
nat_entry}->flag /wo the IS_CHECKPOINTED flag, but the folio write has
already been submitted, will not occur.
Therefore, for atomic file fsync, sbi->node_write should be acquired
through __write_node_folio to ensure that the IS_CHECKPOINTED flag
correctly indicates that the checkpoint write has been completed. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix unprivileged local user can do privileged policy management
An unprivileged local user can load, replace, and remove profiles by
opening the apparmorfs interfaces, via a confused deputy attack, by
passing the opened fd to a privileged process, and getting the
privileged process to write to the interface.
This does require a privileged target that can be manipulated to do
the write for the unprivileged process, but once such access is
achieved full policy management is possible and all the possible
implications that implies: removing confinement, DoS of system or
target applications by denying all execution, by-passing the
unprivileged user namespace restriction, to exploiting kernel bugs for
a local privilege escalation.
The policy management interface can not have its permissions simply
changed from 0666 to 0600 because non-root processes need to be able
to load policy to different policy namespaces.
Instead ensure the task writing the interface has privileges that
are a subset of the task that opened the interface. This is already
done via policy for confined processes, but unconfined can delegate
access to the opened fd, by-passing the usual policy check. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: validate DFA start states are in bounds in unpack_pdb
Start states are read from untrusted data and used as indexes into the
DFA state tables. The aa_dfa_next() function call in unpack_pdb() will
access dfa->tables[YYTD_ID_BASE][start], and if the start state exceeds
the number of states in the DFA, this results in an out-of-bound read.
==================================================================
BUG: KASAN: slab-out-of-bounds in aa_dfa_next+0x2a1/0x360
Read of size 4 at addr ffff88811956fb90 by task su/1097
...
Reject policies with out-of-bounds start states during unpacking
to prevent the issue. |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. While most alignment records store DNA sequence and quality values, the format also allows them to omit this data in certain cases to save space. Due to some quirks of the CRAM format, it is necessary to handle these records carefully as they will actually store data that needs to be consumed and then discarded. Unfortunately the `cram_decode_seq()` did not handle this correctly in some cases. Where this happened it could result in reading a single byte from beyond the end of a heap allocation, followed by writing a single attacker-controlled byte to the same location. Exploiting this bug causes a heap buffer overflow. If a user opens a file crafted to exploit this issue, it could lead to the program crashing, or overwriting of data and heap structures in ways not expected by the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. |
| pkgutil.get_data() did not validate the resource argument as documented, allowing path traversals. |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. As one method of removing redundant data, CRAM uses reference-based compression so that instead of storing the full sequence for each alignment record it stores a location in an external reference sequence along with a list of differences to the reference at that location as a sequence of "features". When decoding these features, an out-by-one error in a test for CRAM features that appear beyond the extent of the CRAM record sequence could result in an invalid write of one attacker-controlled byte beyond the end of a heap buffer. Exploiting this bug causes a heap buffer overflow. If a user opens a file crafted to exploit this issue, it could lead to the program crashing, or overwriting of data and heap structures in ways not expected by the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data using a variety of encodings and compression methods. While most alignment records store DNA sequence and quality values, the format also allows them to omit this data in certain cases to save space. Due to some quirks of the CRAM format, it is necessary to handle these records carefully as they will actually store data that needs to be consumed and then discarded. Unfortunately the `CONST`, `XPACK` and `XRLE` encodings did not properly implement the interface needed to do this. Trying to decode records with omitted sequence or quality data using these encodings would result in an attempt to write to a NULL pointer. Exploiting this bug causes a NULL pointer dereference. Typically this will cause the program to crash. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. In the `cram_decode_slice()` function called while reading CRAM records, validation of the reference id field occurred too late, allowing two out of bounds reads to occur before the invalid data was detected. The bug does allow two values to be leaked to the caller, however as the function reports an error it may be difficult to exploit them. It is also possible that the program will crash due to trying to access invalid memory. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. As one method of removing redundant data, CRAM uses reference-based compression so that instead of storing the full sequence for each alignment record it stores a location in an external reference sequence along with a list of differences to the reference at that location as a sequence of "features". When decoding CRAM records, the reference data is stored in a char array, and parts matching the alignment record sequence are copied over as necessary. Due to insufficient validation of the feature data series, it was possible to make the `cram_decode_seq()` function copy data from either before the start, or after the end of the stored reference either into the buffer used to store the output sequence for the cram record, or into the buffer used to build the SAM `MD` tag. This allowed arbitrary data to be leaked to the calling function. This bug may allow information about program state to be leaked. It may also cause a program crash through an attempt to access invalid memory. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. In the `cram_decode_slice()` function called while reading CRAM records, the value of the mate reference id field was not validated. Later use of this value, for example when converting the data to SAM format, could result in the out of bounds array reads when looking up the corresponding reference name. If the array value obtained also happened to be a valid pointer, it would be interpreted as a string and an attempt would be made to write the data as part of the SAM record. This bug may allow information about program state to be leaked. It may also cause a program crash through an attempt to access invalid memory. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data using a variety of encodings and compression methods. For the `VARINT` and `CONST` encodings, incomplete validation of the context in which the encodings were used could result in up to eight bytes being written beyond the end of a heap allocation, or up to eight bytes being written to the location of a one byte variable on the stack, possibly causing the values to adjacent variables to change unexpectedly. Depending on the data stream this could result either in a heap buffer overflow or a stack overflow. If a user opens a file crafted to exploit this issue it could lead to the program crashing, overwriting of data structures on the heap or stack in ways not expected by the program, or changing the control flow of the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. |
| Improper certificate validation in Devolutions Hub Reporting Service
2025.3.1.1 and earlier allows a network attacker to perform a
man-in-the-middle attack via disabled TLS certificate verification. |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data using a variety of encodings and compression methods. When reading data encoded using the `BYTE_ARRAY_STOP` method, an out-by-one error in the `cram_byte_array_stop_decode_char()` function check for a full output buffer could result in a single attacker-controlled byte being written beyond the end of a heap allocation. Exploiting this bug causes a heap buffer overflow. If a user opens a file crafted to exploit this issue, it could lead to the program crashing, or overwriting of data and heap structures in ways not expected by the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. |
| HTSlib is a library for reading and writing bioinformatics file formats. GZI files are used to index block-compressed GZIP [BGZF] files. In the GZI loading function, `bgzf_index_load_hfile()`, it was possible to trigger an integer overflow, leading to an under- or zero-sized buffer being allocated to store the index. Sixteen zero bytes would then be written to this buffer, and, depending on the result of the overflow the rest of the file may also be loaded into the buffer as well. If the function did attempt to load the data, it would eventually fail due to not reading the expected number of records, and then try to free the overflowed heap buffer. Exploiting this bug causes a heap buffer overflow. If a user opens a file crafted to exploit this issue, it could lead to the program crashing, or overwriting of data and heap structures in ways not expected by the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. The easiest work-around is to discard any `.gzi` index files from untrusted sources, and use the `bgzip -r` option to recreate them. |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data using a variety of encodings and compression methods. When reading data encoded using the `BYTE_ARRAY_LEN` method, the `cram_byte_array_len_decode()` failed to validate that the amount of data being unpacked matched the size of the output buffer where it was to be stored. Depending on the data series being read, this could result either in a heap or a stack overflow with attacker-controlled bytes. Depending on the data stream this could result either in a heap buffer overflow or a stack overflow. If a user opens a file crafted to exploit this issue it could lead to the program crashing, overwriting of data structures on the heap or stack in ways not expected by the program, or changing the control flow of the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. |
| OpenEMR is a free and open source electronic health records and medical practice management application. In versions up to and including 8.0.0, the message/note update endpoint (e.g. PUT or POST) updates by message/note ID only and does not verify that the message belongs to the current patient (or that the user is allowed to edit that patient’s notes). An authenticated user with notes permission can modify any patient’s messages by supplying another message ID. Commit 92a2ff9eaaa80674b3a934a6556e35e7aded5a41 contains a fix for the issue. |
| SAMtools is a program for reading, manipulating and writing bioinformatics file formats. The `mpileup` command outputs DNA sequences that have been aligned against a known reference. On each output line it writes the reference position, optionally the reference DNA base at that position (obtained from a separate file) and all of the DNA bases that aligned to that position. As the output is ordered by position, reference data that is no longer needed is discarded once it has been printed out. Under certain conditions the data could be discarded too early, leading to an attempt to read from a pointer to freed memory. This bug may allow information about program state to be leaked. It may also cause a program crash through an attempt to access invalid memory. This bug is fixed in versions 1.21.1 and 1.22. There is no workaround for this issue. |
| SAMtools is a program for reading, manipulating and writing bioinformatics file formats. Starting in version 1.17, in the cram-size command, used to write information about how well CRAM files are compressed, a check to see if the `cram_decode_compression_header()` was missing. If the function returned an error, this could lead to a NULL pointer dereference. Exploiting this bug causes a NULL pointer dereference. Typically this will cause the program to crash. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. |
| ClipBucket v5 is an open source video sharing platform. An authenticated time-based blind SQL injection vulnerability exists in ClipBucket prior to 5.5.3 #80 within the `actions/ajax.php` endpoint. Due to insufficient input sanitization of the `userid` parameter, an authenticated attacker can execute arbitrary SQL queries, leading to full database disclosure and potential administrative account takeover. Version 5.5.3 #80 fixes the issue. |
