| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Do not let BPF test infra emit invalid GSO types to stack
Yinhao et al. reported that their fuzzer tool was able to trigger a
skb_warn_bad_offload() from netif_skb_features() -> gso_features_check().
When a BPF program - triggered via BPF test infra - pushes the packet
to the loopback device via bpf_clone_redirect() then mentioned offload
warning can be seen. GSO-related features are then rightfully disabled.
We get into this situation due to convert___skb_to_skb() setting
gso_segs and gso_size but not gso_type. Technically, it makes sense
that this warning triggers since the GSO properties are malformed due
to the gso_type. Potentially, the gso_type could be marked non-trustworthy
through setting it at least to SKB_GSO_DODGY without any other specific
assumptions, but that also feels wrong given we should not go further
into the GSO engine in the first place.
The checks were added in 121d57af308d ("gso: validate gso_type in GSO
handlers") because there were malicious (syzbot) senders that combine
a protocol with a non-matching gso_type. If we would want to drop such
packets, gso_features_check() currently only returns feature flags via
netif_skb_features(), so one location for potentially dropping such skbs
could be validate_xmit_unreadable_skb(), but then otoh it would be
an additional check in the fast-path for a very corner case. Given
bpf_clone_redirect() is the only place where BPF test infra could emit
such packets, lets reject them right there. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Initialize allocated memory before use
KMSAN reports: Multiple uninitialized values detected:
- KMSAN: uninit-value in ntfs_read_hdr (3)
- KMSAN: uninit-value in bcmp (3)
Memory is allocated by __getname(), which is a wrapper for
kmem_cache_alloc(). This memory is used before being properly
cleared. Change kmem_cache_alloc() to kmem_cache_zalloc() to
properly allocate and clear memory before use. |
| In the Linux kernel, the following vulnerability has been resolved:
team: Move team device type change at the end of team_port_add
Attempting to add a port device that is already up will expectedly fail,
but not before modifying the team device header_ops.
In the case of the syzbot reproducer the gre0 device is
already in state UP when it attempts to add it as a
port device of team0, this fails but before that
header_ops->create of team0 is changed from eth_header to ipgre_header
in the call to team_dev_type_check_change.
Later when we end up in ipgre_header() struct ip_tunnel* points to nonsense
as the private data of the device still holds a struct team.
Example sequence of iproute2 commands to reproduce the hang/BUG():
ip link add dev team0 type team
ip link add dev gre0 type gre
ip link set dev gre0 up
ip link set dev gre0 master team0
ip link set dev team0 up
ping -I team0 1.1.1.1
Move team_dev_type_check_change down where all other checks have passed
as it changes the dev type with no way to restore it in case
one of the checks that follow it fail.
Also make sure to preserve the origial mtu assignment:
- If port_dev is not the same type as dev, dev takes mtu from port_dev
- If port_dev is the same type as dev, port_dev takes mtu from dev
This is done by adding a conditional before the call to dev_set_mtu
to prevent it from assigning port_dev->mtu = dev->mtu and instead
letting team_dev_type_check_change assign dev->mtu = port_dev->mtu.
The conditional is needed because the patch moves the call to
team_dev_type_check_change past dev_set_mtu.
Testing:
- team device driver in-tree selftests
- Add/remove various devices as slaves of team device
- syzbot |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: delete radeon_fence_process in is_signaled, no deadlock
Delete the attempt to progress the queue when checking if fence is
signaled. This avoids deadlock.
dma-fence_ops::signaled can be called with the fence lock in unknown
state. For radeon, the fence lock is also the wait queue lock. This can
cause a self deadlock when signaled() tries to make forward progress on
the wait queue. But advancing the queue is unneeded because incorrectly
returning false from signaled() is perfectly acceptable.
(cherry picked from commit 527ba26e50ec2ca2be9c7c82f3ad42998a75d0db) |
| In the Linux kernel, the following vulnerability has been resolved:
ksm: use range-walk function to jump over holes in scan_get_next_rmap_item
Currently, scan_get_next_rmap_item() walks every page address in a VMA to
locate mergeable pages. This becomes highly inefficient when scanning
large virtual memory areas that contain mostly unmapped regions, causing
ksmd to use large amount of cpu without deduplicating much pages.
This patch replaces the per-address lookup with a range walk using
walk_page_range(). The range walker allows KSM to skip over entire
unmapped holes in a VMA, avoiding unnecessary lookups. This problem was
previously discussed in [1].
Consider the following test program which creates a 32 TiB mapping in the
virtual address space but only populates a single page:
#include <unistd.h>
#include <stdio.h>
#include <sys/mman.h>
/* 32 TiB */
const size_t size = 32ul * 1024 * 1024 * 1024 * 1024;
int main() {
char *area = mmap(NULL, size, PROT_READ | PROT_WRITE,
MAP_NORESERVE | MAP_PRIVATE | MAP_ANON, -1, 0);
if (area == MAP_FAILED) {
perror("mmap() failed\n");
return -1;
}
/* Populate a single page such that we get an anon_vma. */
*area = 0;
/* Enable KSM. */
madvise(area, size, MADV_MERGEABLE);
pause();
return 0;
}
$ ./ksm-sparse &
$ echo 1 > /sys/kernel/mm/ksm/run
Without this patch ksmd uses 100% of the cpu for a long time (more then 1
hour in my test machine) scanning all the 32 TiB virtual address space
that contain only one mapped page. This makes ksmd essentially deadlocked
not able to deduplicate anything of value. With this patch ksmd walks
only the one mapped page and skips the rest of the 32 TiB virtual address
space, making the scan fast using little cpu. |
| Gogs is an open source self-hosted Git service. In version 0.13.3 and prior, due to the insufficient patch for CVE-2024-56731, it's still possible to update files in the .git directory and achieve remote command execution. This issue has been patched in versions 0.13.4 and 0.14.0+dev. |
| In the Linux kernel, the following vulnerability has been resolved:
usbnet: Fix using smp_processor_id() in preemptible code warnings
Syzbot reported the following warning:
BUG: using smp_processor_id() in preemptible [00000000] code: dhcpcd/2879
caller is usbnet_skb_return+0x74/0x490 drivers/net/usb/usbnet.c:331
CPU: 1 UID: 0 PID: 2879 Comm: dhcpcd Not tainted 6.15.0-rc4-syzkaller-00098-g615dca38c2ea #0 PREEMPT(voluntary)
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120
check_preemption_disabled+0xd0/0xe0 lib/smp_processor_id.c:49
usbnet_skb_return+0x74/0x490 drivers/net/usb/usbnet.c:331
usbnet_resume_rx+0x4b/0x170 drivers/net/usb/usbnet.c:708
usbnet_change_mtu+0x1be/0x220 drivers/net/usb/usbnet.c:417
__dev_set_mtu net/core/dev.c:9443 [inline]
netif_set_mtu_ext+0x369/0x5c0 net/core/dev.c:9496
netif_set_mtu+0xb0/0x160 net/core/dev.c:9520
dev_set_mtu+0xae/0x170 net/core/dev_api.c:247
dev_ifsioc+0xa31/0x18d0 net/core/dev_ioctl.c:572
dev_ioctl+0x223/0x10e0 net/core/dev_ioctl.c:821
sock_do_ioctl+0x19d/0x280 net/socket.c:1204
sock_ioctl+0x42f/0x6a0 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
For historical and portability reasons, the netif_rx() is usually
run in the softirq or interrupt context, this commit therefore add
local_bh_disable/enable() protection in the usbnet_resume_rx(). |
| In the Linux kernel, the following vulnerability has been resolved:
tls: Use __sk_dst_get() and dst_dev_rcu() in get_netdev_for_sock().
get_netdev_for_sock() is called during setsockopt(),
so not under RCU.
Using sk_dst_get(sk)->dev could trigger UAF.
Let's use __sk_dst_get() and dst_dev_rcu().
Note that the only ->ndo_sk_get_lower_dev() user is
bond_sk_get_lower_dev(), which uses RCU. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix recursive locking in RPC handle list access
Since commit 305853cce3794 ("ksmbd: Fix race condition in RPC handle list
access"), ksmbd_session_rpc_method() attempts to lock sess->rpc_lock.
This causes hung connections / tasks when a client attempts to open
a named pipe. Using Samba's rpcclient tool:
$ rpcclient //192.168.1.254 -U user%password
$ rpcclient $> srvinfo
<connection hung here>
Kernel side:
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/0:0 state:D stack:0 pid:5021 tgid:5021 ppid:2 flags:0x00200000
Workqueue: ksmbd-io handle_ksmbd_work
Call trace:
__schedule from schedule+0x3c/0x58
schedule from schedule_preempt_disabled+0xc/0x10
schedule_preempt_disabled from rwsem_down_read_slowpath+0x1b0/0x1d8
rwsem_down_read_slowpath from down_read+0x28/0x30
down_read from ksmbd_session_rpc_method+0x18/0x3c
ksmbd_session_rpc_method from ksmbd_rpc_open+0x34/0x68
ksmbd_rpc_open from ksmbd_session_rpc_open+0x194/0x228
ksmbd_session_rpc_open from create_smb2_pipe+0x8c/0x2c8
create_smb2_pipe from smb2_open+0x10c/0x27ac
smb2_open from handle_ksmbd_work+0x238/0x3dc
handle_ksmbd_work from process_scheduled_works+0x160/0x25c
process_scheduled_works from worker_thread+0x16c/0x1e8
worker_thread from kthread+0xa8/0xb8
kthread from ret_from_fork+0x14/0x38
Exception stack(0x8529ffb0 to 0x8529fff8)
The task deadlocks because the lock is already held:
ksmbd_session_rpc_open
down_write(&sess->rpc_lock)
ksmbd_rpc_open
ksmbd_session_rpc_method
down_read(&sess->rpc_lock) <-- deadlock
Adjust ksmbd_session_rpc_method() callers to take the lock when necessary. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix race condition in RPC handle list access
The 'sess->rpc_handle_list' XArray manages RPC handles within a ksmbd
session. Access to this list is intended to be protected by
'sess->rpc_lock' (an rw_semaphore). However, the locking implementation was
flawed, leading to potential race conditions.
In ksmbd_session_rpc_open(), the code incorrectly acquired only a read lock
before calling xa_store() and xa_erase(). Since these operations modify
the XArray structure, a write lock is required to ensure exclusive access
and prevent data corruption from concurrent modifications.
Furthermore, ksmbd_session_rpc_method() accessed the list using xa_load()
without holding any lock at all. This could lead to reading inconsistent
data or a potential use-after-free if an entry is concurrently removed and
the pointer is dereferenced.
Fix these issues by:
1. Using down_write() and up_write() in ksmbd_session_rpc_open()
to ensure exclusive access during XArray modification, and ensuring
the lock is correctly released on error paths.
2. Adding down_read() and up_read() in ksmbd_session_rpc_method()
to safely protect the lookup. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - flush misc workqueue during device shutdown
Repeated loading and unloading of a device specific QAT driver, for
example qat_4xxx, in a tight loop can lead to a crash due to a
use-after-free scenario. This occurs when a power management (PM)
interrupt triggers just before the device-specific driver (e.g.,
qat_4xxx.ko) is unloaded, while the core driver (intel_qat.ko) remains
loaded.
Since the driver uses a shared workqueue (`qat_misc_wq`) across all
devices and owned by intel_qat.ko, a deferred routine from the
device-specific driver may still be pending in the queue. If this
routine executes after the driver is unloaded, it can dereference freed
memory, resulting in a page fault and kernel crash like the following:
BUG: unable to handle page fault for address: ffa000002e50a01c
#PF: supervisor read access in kernel mode
RIP: 0010:pm_bh_handler+0x1d2/0x250 [intel_qat]
Call Trace:
pm_bh_handler+0x1d2/0x250 [intel_qat]
process_one_work+0x171/0x340
worker_thread+0x277/0x3a0
kthread+0xf0/0x120
ret_from_fork+0x2d/0x50
To prevent this, flush the misc workqueue during device shutdown to
ensure that all pending work items are completed before the driver is
unloaded.
Note: This approach may slightly increase shutdown latency if the
workqueue contains jobs from other devices, but it ensures correctness
and stability. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: sr: Fix MAC comparison to be constant-time
To prevent timing attacks, MACs need to be compared in constant time.
Use the appropriate helper function for this. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: linearize cloned gso packets in sctp_rcv
A cloned head skb still shares these frag skbs in fraglist with the
original head skb. It's not safe to access these frag skbs.
syzbot reported two use-of-uninitialized-memory bugs caused by this:
BUG: KMSAN: uninit-value in sctp_inq_pop+0x15b7/0x1920 net/sctp/inqueue.c:211
sctp_inq_pop+0x15b7/0x1920 net/sctp/inqueue.c:211
sctp_assoc_bh_rcv+0x1a7/0xc50 net/sctp/associola.c:998
sctp_inq_push+0x2ef/0x380 net/sctp/inqueue.c:88
sctp_backlog_rcv+0x397/0xdb0 net/sctp/input.c:331
sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1122
__release_sock+0x1da/0x330 net/core/sock.c:3106
release_sock+0x6b/0x250 net/core/sock.c:3660
sctp_wait_for_connect+0x487/0x820 net/sctp/socket.c:9360
sctp_sendmsg_to_asoc+0x1ec1/0x1f00 net/sctp/socket.c:1885
sctp_sendmsg+0x32b9/0x4a80 net/sctp/socket.c:2031
inet_sendmsg+0x25a/0x280 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:718 [inline]
and
BUG: KMSAN: uninit-value in sctp_assoc_bh_rcv+0x34e/0xbc0 net/sctp/associola.c:987
sctp_assoc_bh_rcv+0x34e/0xbc0 net/sctp/associola.c:987
sctp_inq_push+0x2a3/0x350 net/sctp/inqueue.c:88
sctp_backlog_rcv+0x3c7/0xda0 net/sctp/input.c:331
sk_backlog_rcv+0x142/0x420 include/net/sock.h:1148
__release_sock+0x1d3/0x330 net/core/sock.c:3213
release_sock+0x6b/0x270 net/core/sock.c:3767
sctp_wait_for_connect+0x458/0x820 net/sctp/socket.c:9367
sctp_sendmsg_to_asoc+0x223a/0x2260 net/sctp/socket.c:1886
sctp_sendmsg+0x3910/0x49f0 net/sctp/socket.c:2032
inet_sendmsg+0x269/0x2a0 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:712 [inline]
This patch fixes it by linearizing cloned gso packets in sctp_rcv(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject narrower access to pointer ctx fields
The following BPF program, simplified from a syzkaller repro, causes a
kernel warning:
r0 = *(u8 *)(r1 + 169);
exit;
With pointer field sk being at offset 168 in __sk_buff. This access is
detected as a narrower read in bpf_skb_is_valid_access because it
doesn't match offsetof(struct __sk_buff, sk). It is therefore allowed
and later proceeds to bpf_convert_ctx_access. Note that for the
"is_narrower_load" case in the convert_ctx_accesses(), the insn->off
is aligned, so the cnt may not be 0 because it matches the
offsetof(struct __sk_buff, sk) in the bpf_convert_ctx_access. However,
the target_size stays 0 and the verifier errors with a kernel warning:
verifier bug: error during ctx access conversion(1)
This patch fixes that to return a proper "invalid bpf_context access
off=X size=Y" error on the load instruction.
The same issue affects multiple other fields in context structures that
allow narrow access. Some other non-affected fields (for sk_msg,
sk_lookup, and sockopt) were also changed to use bpf_ctx_range_ptr for
consistency.
Note this syzkaller crash was reported in the "Closes" link below, which
used to be about a different bug, fixed in
commit fce7bd8e385a ("bpf/verifier: Handle BPF_LOAD_ACQ instructions
in insn_def_regno()"). Because syzbot somehow confused the two bugs,
the new crash and repro didn't get reported to the mailing list. |
| In the Linux kernel, the following vulnerability has been resolved:
genirq/irq_sim: Initialize work context pointers properly
Initialize `ops` member's pointers properly by using kzalloc() instead of
kmalloc() when allocating the simulation work context. Otherwise the
pointers contain random content leading to invalid dereferencing. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check dce_hwseq before dereferencing it
[WHAT]
hws was checked for null earlier in dce110_blank_stream, indicating hws
can be null, and should be checked whenever it is used.
(cherry picked from commit 79db43611ff61280b6de58ce1305e0b2ecf675ad) |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: fix race between nfsd registration and exports_proc
As of now nfsd calls create_proc_exports_entry() at start of init_nfsd
and cleanup by remove_proc_entry() at last of exit_nfsd.
Which causes kernel OOPs if there is race between below 2 operations:
(i) exportfs -r
(ii) mount -t nfsd none /proc/fs/nfsd
for 5.4 kernel ARM64:
CPU 1:
el1_irq+0xbc/0x180
arch_counter_get_cntvct+0x14/0x18
running_clock+0xc/0x18
preempt_count_add+0x88/0x110
prep_new_page+0xb0/0x220
get_page_from_freelist+0x2d8/0x1778
__alloc_pages_nodemask+0x15c/0xef0
__vmalloc_node_range+0x28c/0x478
__vmalloc_node_flags_caller+0x8c/0xb0
kvmalloc_node+0x88/0xe0
nfsd_init_net+0x6c/0x108 [nfsd]
ops_init+0x44/0x170
register_pernet_operations+0x114/0x270
register_pernet_subsys+0x34/0x50
init_nfsd+0xa8/0x718 [nfsd]
do_one_initcall+0x54/0x2e0
CPU 2 :
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
PC is at : exports_net_open+0x50/0x68 [nfsd]
Call trace:
exports_net_open+0x50/0x68 [nfsd]
exports_proc_open+0x2c/0x38 [nfsd]
proc_reg_open+0xb8/0x198
do_dentry_open+0x1c4/0x418
vfs_open+0x38/0x48
path_openat+0x28c/0xf18
do_filp_open+0x70/0xe8
do_sys_open+0x154/0x248
Sometimes it crashes at exports_net_open() and sometimes cache_seq_next_rcu().
and same is happening on latest 6.14 kernel as well:
[ 0.000000] Linux version 6.14.0-rc5-next-20250304-dirty
...
[ 285.455918] Unable to handle kernel paging request at virtual address 00001f4800001f48
...
[ 285.464902] pc : cache_seq_next_rcu+0x78/0xa4
...
[ 285.469695] Call trace:
[ 285.470083] cache_seq_next_rcu+0x78/0xa4 (P)
[ 285.470488] seq_read+0xe0/0x11c
[ 285.470675] proc_reg_read+0x9c/0xf0
[ 285.470874] vfs_read+0xc4/0x2fc
[ 285.471057] ksys_read+0x6c/0xf4
[ 285.471231] __arm64_sys_read+0x1c/0x28
[ 285.471428] invoke_syscall+0x44/0x100
[ 285.471633] el0_svc_common.constprop.0+0x40/0xe0
[ 285.471870] do_el0_svc_compat+0x1c/0x34
[ 285.472073] el0_svc_compat+0x2c/0x80
[ 285.472265] el0t_32_sync_handler+0x90/0x140
[ 285.472473] el0t_32_sync+0x19c/0x1a0
[ 285.472887] Code: f9400885 93407c23 937d7c27 11000421 (f86378a3)
[ 285.473422] ---[ end trace 0000000000000000 ]---
It reproduced simply with below script:
while [ 1 ]
do
/exportfs -r
done &
while [ 1 ]
do
insmod /nfsd.ko
mount -t nfsd none /proc/fs/nfsd
umount /proc/fs/nfsd
rmmod nfsd
done &
So exporting interfaces to user space shall be done at last and
cleanup at first place.
With change there is no Kernel OOPs. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: make sure that ptp_rate is not 0 before configuring EST
If the ptp_rate recorded earlier in the driver happens to be 0, this
bogus value will propagate up to EST configuration, where it will
trigger a division by 0.
Prevent this division by 0 by adding the corresponding check and error
code. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Replace Mutex with Spinlock for RLCG register access to avoid Priority Inversion in SRIOV
RLCG Register Access is a way for virtual functions to safely access GPU
registers in a virtualized environment., including TLB flushes and
register reads. When multiple threads or VFs try to access the same
registers simultaneously, it can lead to race conditions. By using the
RLCG interface, the driver can serialize access to the registers. This
means that only one thread can access the registers at a time,
preventing conflicts and ensuring that operations are performed
correctly. Additionally, when a low-priority task holds a mutex that a
high-priority task needs, ie., If a thread holding a spinlock tries to
acquire a mutex, it can lead to priority inversion. register access in
amdgpu_virt_rlcg_reg_rw especially in a fast code path is critical.
The call stack shows that the function amdgpu_virt_rlcg_reg_rw is being
called, which attempts to acquire the mutex. This function is invoked
from amdgpu_sriov_wreg, which in turn is called from
gmc_v11_0_flush_gpu_tlb.
The [ BUG: Invalid wait context ] indicates that a thread is trying to
acquire a mutex while it is in a context that does not allow it to sleep
(like holding a spinlock).
Fixes the below:
[ 253.013423] =============================
[ 253.013434] [ BUG: Invalid wait context ]
[ 253.013446] 6.12.0-amdstaging-drm-next-lol-050225 #14 Tainted: G U OE
[ 253.013464] -----------------------------
[ 253.013475] kworker/0:1/10 is trying to lock:
[ 253.013487] ffff9f30542e3cf8 (&adev->virt.rlcg_reg_lock){+.+.}-{3:3}, at: amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.013815] other info that might help us debug this:
[ 253.013827] context-{4:4}
[ 253.013835] 3 locks held by kworker/0:1/10:
[ 253.013847] #0: ffff9f3040050f58 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x3f5/0x680
[ 253.013877] #1: ffffb789c008be40 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_one_work+0x1d6/0x680
[ 253.013905] #2: ffff9f3054281838 (&adev->gmc.invalidate_lock){+.+.}-{2:2}, at: gmc_v11_0_flush_gpu_tlb+0x198/0x4f0 [amdgpu]
[ 253.014154] stack backtrace:
[ 253.014164] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Tainted: G U OE 6.12.0-amdstaging-drm-next-lol-050225 #14
[ 253.014189] Tainted: [U]=USER, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[ 253.014203] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/18/2024
[ 253.014224] Workqueue: events work_for_cpu_fn
[ 253.014241] Call Trace:
[ 253.014250] <TASK>
[ 253.014260] dump_stack_lvl+0x9b/0xf0
[ 253.014275] dump_stack+0x10/0x20
[ 253.014287] __lock_acquire+0xa47/0x2810
[ 253.014303] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.014321] lock_acquire+0xd1/0x300
[ 253.014333] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.014562] ? __lock_acquire+0xa6b/0x2810
[ 253.014578] __mutex_lock+0x85/0xe20
[ 253.014591] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.014782] ? sched_clock_noinstr+0x9/0x10
[ 253.014795] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.014808] ? local_clock_noinstr+0xe/0xc0
[ 253.014822] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.015012] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.015029] mutex_lock_nested+0x1b/0x30
[ 253.015044] ? mutex_lock_nested+0x1b/0x30
[ 253.015057] amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.015249] amdgpu_sriov_wreg+0xc5/0xd0 [amdgpu]
[ 253.015435] gmc_v11_0_flush_gpu_tlb+0x44b/0x4f0 [amdgpu]
[ 253.015667] gfx_v11_0_hw_init+0x499/0x29c0 [amdgpu]
[ 253.015901] ? __pfx_smu_v13_0_update_pcie_parameters+0x10/0x10 [amdgpu]
[ 253.016159] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.016173] ? smu_hw_init+0x18d/0x300 [amdgpu]
[ 253.016403] amdgpu_device_init+0x29ad/0x36a0 [amdgpu]
[ 253.016614] amdgpu_driver_load_kms+0x1a/0xc0 [amdgpu]
[ 253.0170
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
espintcp: fix skb leaks
A few error paths are missing a kfree_skb. |
