| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix dangling pointer on mgmt_add_adv_patterns_monitor_complete
This fixes the condition checking so mgmt_pending_valid is executed
whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd)
would kfree(cmd) without unlinking it from the list first, leaving a
dangling pointer. Any subsequent list traversal (e.g.,
mgmt_pending_foreach during __mgmt_power_off, or another
mgmt_pending_valid call) would dereference freed memory. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: meson-spicc: Fix double-put in remove path
meson_spicc_probe() registers the controller with
devm_spi_register_controller(), so teardown already drops the
controller reference via devm cleanup.
Calling spi_controller_put() again in meson_spicc_remove()
causes a double-put. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Do not skip unrelated mode changes in DSC validation
Starting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in
atomic check"), amdgpu resets the CRTC state mode_changed flag to false when
recomputing the DSC configuration results in no timing change for a particular
stream.
However, this is incorrect in scenarios where a change in MST/DSC configuration
happens in the same KMS commit as another (unrelated) mode change. For example,
the integrated panel of a laptop may be configured differently (e.g., HDR
enabled/disabled) depending on whether external screens are attached. In this
case, plugging in external DP-MST screens may result in the mode_changed flag
being dropped incorrectly for the integrated panel if its DSC configuration
did not change during precomputation in pre_validate_dsc().
At this point, however, dm_update_crtc_state() has already created new streams
for CRTCs with DSC-independent mode changes. In turn,
amdgpu_dm_commit_streams() will never release the old stream, resulting in a
memory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to
the new stream either, which manifests as a use-after-free when the stream gets
disabled later on:
BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu]
Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977
Workqueue: events drm_mode_rmfb_work_fn
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xa0
print_address_description.constprop.0+0x88/0x320
? dc_stream_release+0x25/0x90 [amdgpu]
print_report+0xfc/0x1ff
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x225/0x4e0
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_report+0xe1/0x180
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_check_range+0x125/0x200
dc_stream_release+0x25/0x90 [amdgpu]
dc_state_destruct+0x14d/0x5c0 [amdgpu]
dc_state_release.part.0+0x4e/0x130 [amdgpu]
dm_atomic_destroy_state+0x3f/0x70 [amdgpu]
drm_atomic_state_default_clear+0x8ee/0xf30
? drm_mode_object_put.part.0+0xb1/0x130
__drm_atomic_state_free+0x15c/0x2d0
atomic_remove_fb+0x67e/0x980
Since there is no reliable way of figuring out whether a CRTC has unrelated
mode changes pending at the time of DSC validation, remember the value of the
mode_changed flag from before the point where a CRTC was marked as potentially
affected by a change in DSC configuration. Reset the mode_changed flag to this
earlier value instead in pre_validate_dsc().
(cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b) |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: validate p_idx bounds in ext4_ext_correct_indexes
ext4_ext_correct_indexes() walks up the extent tree correcting
index entries when the first extent in a leaf is modified. Before
accessing path[k].p_idx->ei_block, there is no validation that
p_idx falls within the valid range of index entries for that
level.
If the on-disk extent header contains a corrupted or crafted
eh_entries value, p_idx can point past the end of the allocated
buffer, causing a slab-out-of-bounds read.
Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at
both access sites: before the while loop and inside it. Return
-EFSCORRUPTED if the index pointer is out of range, consistent
with how other bounds violations are handled in the ext4 extent
tree code. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix leaking event log memory
During the device remove process, the device is reset, causing the
configuration registers to go back to their default state, which is
zero. As the driver is checking if the event log support was enabled
before deallocating, it will fail if a reset happened before.
Do not check if the support was enabled, the check for 'idxd->evl'
being valid (only allocated if the HW capability is available) is
enough. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Limit BO list entry count to prevent resource exhaustion
Userspace can pass an arbitrary number of BO list entries via the
bo_number field. Although the previous multiplication overflow check
prevents out-of-bounds allocation, a large number of entries could still
cause excessive memory allocation (up to potentially gigabytes) and
unnecessarily long list processing times.
Introduce a hard limit of 128k entries per BO list, which is more than
sufficient for any realistic use case (e.g., a single list containing all
buffers in a large scene). This prevents memory exhaustion attacks and
ensures predictable performance.
Return -EINVAL if the requested entry count exceeds the limit
(cherry picked from commit 688b87d39e0aa8135105b40dc167d74b5ada5332) |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: fix use-after-free due to enslave fail after slave array update
Fix a use-after-free which happens due to enslave failure after the new
slave has been added to the array. Since the new slave can be used for Tx
immediately, we can use it after it has been freed by the enslave error
cleanup path which frees the allocated slave memory. Slave update array is
supposed to be called last when further enslave failures are not expected.
Move it after xdp setup to avoid any problems.
It is very easy to reproduce the problem with a simple xdp_pass prog:
ip l add bond1 type bond mode balance-xor
ip l set bond1 up
ip l set dev bond1 xdp object xdp_pass.o sec xdp_pass
ip l add dumdum type dummy
Then run in parallel:
while :; do ip l set dumdum master bond1 1>/dev/null 2>&1; done;
mausezahn bond1 -a own -b rand -A rand -B 1.1.1.1 -c 0 -t tcp "dp=1-1023, flags=syn"
The crash happens almost immediately:
[ 605.602850] Oops: general protection fault, probably for non-canonical address 0xe0e6fc2460000137: 0000 [#1] SMP KASAN NOPTI
[ 605.602916] KASAN: maybe wild-memory-access in range [0x07380123000009b8-0x07380123000009bf]
[ 605.602946] CPU: 0 UID: 0 PID: 2445 Comm: mausezahn Kdump: loaded Tainted: G B 6.19.0-rc6+ #21 PREEMPT(voluntary)
[ 605.602979] Tainted: [B]=BAD_PAGE
[ 605.602998] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 605.603032] RIP: 0010:netdev_core_pick_tx+0xcd/0x210
[ 605.603063] Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 3e 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 6b 08 49 8d 7d 30 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 25 01 00 00 49 8b 45 30 4c 89 e2 48 89 ee 48 89
[ 605.603111] RSP: 0018:ffff88817b9af348 EFLAGS: 00010213
[ 605.603145] RAX: dffffc0000000000 RBX: ffff88817d28b420 RCX: 0000000000000000
[ 605.603172] RDX: 00e7002460000137 RSI: 0000000000000008 RDI: 07380123000009be
[ 605.603199] RBP: ffff88817b541a00 R08: 0000000000000001 R09: fffffbfff3ed8c0c
[ 605.603226] R10: ffffffff9f6c6067 R11: 0000000000000001 R12: 0000000000000000
[ 605.603253] R13: 073801230000098e R14: ffff88817d28b448 R15: ffff88817b541a84
[ 605.603286] FS: 00007f6570ef67c0(0000) GS:ffff888221dfa000(0000) knlGS:0000000000000000
[ 605.603319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 605.603343] CR2: 00007f65712fae40 CR3: 000000011371b000 CR4: 0000000000350ef0
[ 605.603373] Call Trace:
[ 605.603392] <TASK>
[ 605.603410] __dev_queue_xmit+0x448/0x32a0
[ 605.603434] ? __pfx_vprintk_emit+0x10/0x10
[ 605.603461] ? __pfx_vprintk_emit+0x10/0x10
[ 605.603484] ? __pfx___dev_queue_xmit+0x10/0x10
[ 605.603507] ? bond_start_xmit+0xbfb/0xc20 [bonding]
[ 605.603546] ? _printk+0xcb/0x100
[ 605.603566] ? __pfx__printk+0x10/0x10
[ 605.603589] ? bond_start_xmit+0xbfb/0xc20 [bonding]
[ 605.603627] ? add_taint+0x5e/0x70
[ 605.603648] ? add_taint+0x2a/0x70
[ 605.603670] ? end_report.cold+0x51/0x75
[ 605.603693] ? bond_start_xmit+0xbfb/0xc20 [bonding]
[ 605.603731] bond_start_xmit+0x623/0xc20 [bonding] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix memory leak in set_ssp_complete
Fix memory leak in set_ssp_complete() where mgmt_pending_cmd structures
are not freed after being removed from the pending list.
Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") replaced
mgmt_pending_foreach() calls with individual command handling but missed
adding mgmt_pending_free() calls in both error and success paths of
set_ssp_complete(). Other completion functions like set_le_complete()
were fixed correctly in the same commit.
This causes a memory leak of the mgmt_pending_cmd structure and its
associated parameter data for each SSP command that completes.
Add the missing mgmt_pending_free(cmd) calls in both code paths to fix
the memory leak. Also fix the same issue in set_advertising_complete(). |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to detect potential corrupted nid in free_nid_list
As reported, on-disk footer.ino and footer.nid is the same and
out-of-range, let's add sanity check on f2fs_alloc_nid() to detect
any potential corruption in free_nid_list. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix possible UAFs
This attemps to fix possible UAFs caused by struct mgmt_pending being
freed while still being processed like in the following trace, in order
to fix mgmt_pending_valid is introduce and use to check if the
mgmt_pending hasn't been removed from the pending list, on the complete
callbacks it is used to check and in addtion remove the cmd from the list
while holding mgmt_pending_lock to avoid TOCTOU problems since if the cmd
is left on the list it can still be accessed and freed.
BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_sync+0x35/0x50 net/bluetooth/mgmt.c:5223
Read of size 8 at addr ffff8880709d4dc0 by task kworker/u11:0/55
CPU: 0 UID: 0 PID: 55 Comm: kworker/u11:0 Not tainted 6.16.4 #2 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
mgmt_add_adv_patterns_monitor_sync+0x35/0x50 net/bluetooth/mgmt.c:5223
hci_cmd_sync_work+0x210/0x3a0 net/bluetooth/hci_sync.c:332
process_one_work kernel/workqueue.c:3238 [inline]
process_scheduled_works+0xade/0x17b0 kernel/workqueue.c:3321
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402
kthread+0x711/0x8a0 kernel/kthread.c:464
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16.4/arch/x86/entry/entry_64.S:245
</TASK>
Allocated by task 12210:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4364
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
mgmt_pending_new+0x65/0x1e0 net/bluetooth/mgmt_util.c:269
mgmt_pending_add+0x35/0x140 net/bluetooth/mgmt_util.c:296
__add_adv_patterns_monitor+0x130/0x200 net/bluetooth/mgmt.c:5247
add_adv_patterns_monitor+0x214/0x360 net/bluetooth/mgmt.c:5364
hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719
hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839
sock_sendmsg_nosec net/socket.c:714 [inline]
__sock_sendmsg+0x219/0x270 net/socket.c:729
sock_write_iter+0x258/0x330 net/socket.c:1133
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x5c9/0xb30 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 12221:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x62/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2381 [inline]
slab_free mm/slub.c:4648 [inline]
kfree+0x18e/0x440 mm/slub.c:4847
mgmt_pending_free net/bluetooth/mgmt_util.c:311 [inline]
mgmt_pending_foreach+0x30d/0x380 net/bluetooth/mgmt_util.c:257
__mgmt_power_off+0x169/0x350 net/bluetooth/mgmt.c:9444
hci_dev_close_sync+0x754/0x1330 net/bluetooth/hci_sync.c:5290
hci_dev_do_close net/bluetooth/hci_core.c:501 [inline]
hci_dev_close+0x108/0x200 net/bluetooth/hci_core.c:526
sock_do_ioctl+0xd9/0x300 net/socket.c:1192
sock_ioctl+0x576/0x790 net/socket.c:1313
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xf
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
padata: Fix pd UAF once and for all
There is a race condition/UAF in padata_reorder that goes back
to the initial commit. A reference count is taken at the start
of the process in padata_do_parallel, and released at the end in
padata_serial_worker.
This reference count is (and only is) required for padata_replace
to function correctly. If padata_replace is never called then
there is no issue.
In the function padata_reorder which serves as the core of padata,
as soon as padata is added to queue->serial.list, and the associated
spin lock released, that padata may be processed and the reference
count on pd would go away.
Fix this by getting the next padata before the squeue->serial lock
is released.
In order to make this possible, simplify padata_reorder by only
calling it once the next padata arrives. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: spi-nor: sst: Fix SST write failure
'commit 18bcb4aa54ea ("mtd: spi-nor: sst: Factor out common write operation
to `sst_nor_write_data()`")' introduced a bug where only one byte of data
is written, regardless of the number of bytes passed to
sst_nor_write_data(), causing a kernel crash during the write operation.
Ensure the correct number of bytes are written as passed to
sst_nor_write_data().
Call trace:
[ 57.400180] ------------[ cut here ]------------
[ 57.404842] While writing 2 byte written 1 bytes
[ 57.409493] WARNING: CPU: 0 PID: 737 at drivers/mtd/spi-nor/sst.c:187 sst_nor_write_data+0x6c/0x74
[ 57.418464] Modules linked in:
[ 57.421517] CPU: 0 UID: 0 PID: 737 Comm: mtd_debug Not tainted 6.12.0-g5ad04afd91f9 #30
[ 57.429517] Hardware name: Xilinx Versal A2197 Processor board revA - x-prc-02 revA (DT)
[ 57.437600] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 57.444557] pc : sst_nor_write_data+0x6c/0x74
[ 57.448911] lr : sst_nor_write_data+0x6c/0x74
[ 57.453264] sp : ffff80008232bb40
[ 57.456570] x29: ffff80008232bb40 x28: 0000000000010000 x27: 0000000000000001
[ 57.463708] x26: 000000000000ffff x25: 0000000000000000 x24: 0000000000000000
[ 57.470843] x23: 0000000000010000 x22: ffff80008232bbf0 x21: ffff000816230000
[ 57.477978] x20: ffff0008056c0080 x19: 0000000000000002 x18: 0000000000000006
[ 57.485112] x17: 0000000000000000 x16: 0000000000000000 x15: ffff80008232b580
[ 57.492246] x14: 0000000000000000 x13: ffff8000816d1530 x12: 00000000000004a4
[ 57.499380] x11: 000000000000018c x10: ffff8000816fd530 x9 : ffff8000816d1530
[ 57.506515] x8 : 00000000fffff7ff x7 : ffff8000816fd530 x6 : 0000000000000001
[ 57.513649] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[ 57.520782] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0008049b0000
[ 57.527916] Call trace:
[ 57.530354] sst_nor_write_data+0x6c/0x74
[ 57.534361] sst_nor_write+0xb4/0x18c
[ 57.538019] mtd_write_oob_std+0x7c/0x88
[ 57.541941] mtd_write_oob+0x70/0xbc
[ 57.545511] mtd_write+0x68/0xa8
[ 57.548733] mtdchar_write+0x10c/0x290
[ 57.552477] vfs_write+0xb4/0x3a8
[ 57.555791] ksys_write+0x74/0x10c
[ 57.559189] __arm64_sys_write+0x1c/0x28
[ 57.563109] invoke_syscall+0x54/0x11c
[ 57.566856] el0_svc_common.constprop.0+0xc0/0xe0
[ 57.571557] do_el0_svc+0x1c/0x28
[ 57.574868] el0_svc+0x30/0xcc
[ 57.577921] el0t_64_sync_handler+0x120/0x12c
[ 57.582276] el0t_64_sync+0x190/0x194
[ 57.585933] ---[ end trace 0000000000000000 ]---
[pratyush@kernel.org: add Cc stable tag] |
| In the Linux kernel, the following vulnerability has been resolved:
net: Fix icmp host relookup triggering ip_rt_bug
arp link failure may trigger ip_rt_bug while xfrm enabled, call trace is:
WARNING: CPU: 0 PID: 0 at net/ipv4/route.c:1241 ip_rt_bug+0x14/0x20
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:ip_rt_bug+0x14/0x20
Call Trace:
<IRQ>
ip_send_skb+0x14/0x40
__icmp_send+0x42d/0x6a0
ipv4_link_failure+0xe2/0x1d0
arp_error_report+0x3c/0x50
neigh_invalidate+0x8d/0x100
neigh_timer_handler+0x2e1/0x330
call_timer_fn+0x21/0x120
__run_timer_base.part.0+0x1c9/0x270
run_timer_softirq+0x4c/0x80
handle_softirqs+0xac/0x280
irq_exit_rcu+0x62/0x80
sysvec_apic_timer_interrupt+0x77/0x90
The script below reproduces this scenario:
ip xfrm policy add src 0.0.0.0/0 dst 0.0.0.0/0 \
dir out priority 0 ptype main flag localok icmp
ip l a veth1 type veth
ip a a 192.168.141.111/24 dev veth0
ip l s veth0 up
ping 192.168.141.155 -c 1
icmp_route_lookup() create input routes for locally generated packets
while xfrm relookup ICMP traffic.Then it will set input route
(dst->out = ip_rt_bug) to skb for DESTUNREACH.
For ICMP err triggered by locally generated packets, dst->dev of output
route is loopback. Generally, xfrm relookup verification is not required
on loopback interfaces (net.ipv4.conf.lo.disable_xfrm = 1).
Skip icmp relookup for locally generated packets to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: support non-r10 register spill/fill to/from stack in precision tracking
Use instruction (jump) history to record instructions that performed
register spill/fill to/from stack, regardless if this was done through
read-only r10 register, or any other register after copying r10 into it
*and* potentially adjusting offset.
To make this work reliably, we push extra per-instruction flags into
instruction history, encoding stack slot index (spi) and stack frame
number in extra 10 bit flags we take away from prev_idx in instruction
history. We don't touch idx field for maximum performance, as it's
checked most frequently during backtracking.
This change removes basically the last remaining practical limitation of
precision backtracking logic in BPF verifier. It fixes known
deficiencies, but also opens up new opportunities to reduce number of
verified states, explored in the subsequent patches.
There are only three differences in selftests' BPF object files
according to veristat, all in the positive direction (less states).
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
-------------------------------------- ------------- --------- --------- ------------- ---------- ---------- -------------
test_cls_redirect_dynptr.bpf.linked3.o cls_redirect 2987 2864 -123 (-4.12%) 240 231 -9 (-3.75%)
xdp_synproxy_kern.bpf.linked3.o syncookie_tc 82848 82661 -187 (-0.23%) 5107 5073 -34 (-0.67%)
xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 85116 84964 -152 (-0.18%) 5162 5130 -32 (-0.62%)
Note, I avoided renaming jmp_history to more generic insn_hist to
minimize number of lines changed and potential merge conflicts between
bpf and bpf-next trees.
Notice also cur_hist_entry pointer reset to NULL at the beginning of
instruction verification loop. This pointer avoids the problem of
relying on last jump history entry's insn_idx to determine whether we
already have entry for current instruction or not. It can happen that we
added jump history entry because current instruction is_jmp_point(), but
also we need to add instruction flags for stack access. In this case, we
don't want to entries, so we need to reuse last added entry, if it is
present.
Relying on insn_idx comparison has the same ambiguity problem as the one
that was fixed recently in [0], so we avoid that.
[0] https://patchwork.kernel.org/project/netdevbpf/patch/20231110002638.4168352-3-andrii@kernel.org/ |
| D-Link DCS-932L v2.18.01 is vulnerable to Command Injection in the function sub_42EF14 of the file /bin/alphapd. The manipulation of the argument LightSensorControl leads to command injection. |
| VX Search 10.6.18 contains a local buffer overflow vulnerability that allows attackers to overwrite the instruction pointer by supplying an oversized string in the directory field. Attackers can craft a malicious input file containing 271 bytes of junk data followed by a return address to execute arbitrary code with application privileges. |
| Joomla! Component Js Jobs 1.2.0 contains a cross-site request forgery vulnerability that allows attackers to perform state-changing actions without token validation. Attackers can craft malicious HTML forms targeting administrative endpoints like job.jobenforcedelete to delete job entries or modify component settings when administrators visit attacker-controlled pages. |
| A vulnerability was identified in xiandafu beetl up to 3.20.2. Affected is an unknown function of the file beetl-classic-integration/beetl-spring-classic/src/main/java/org/beetl/ext/spring/SpELFunction.java of the component SpELFunction. The manipulation leads to improper neutralization of special elements used in an expression language statement. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Google Drive for WordPress 2.2 contains a path traversal vulnerability that allows unauthenticated attackers to read arbitrary files by injecting directory traversal sequences in the file_name parameter. Attackers can send POST requests to gdrive-ajaxs.php with the ajaxstype parameter set to del_fl_bkp and file_name containing traversal sequences ../../wp-config.php to access sensitive configuration files. |
| A vulnerability was found in adenhq hive up to 0.11.0. This affects the function _read_events_tail of the file core/framework/server/routes_sessions.py of the component Delete Request Handler. Performing a manipulation results in path traversal. The attack may be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
