| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: r8152: fix resume reset deadlock
rtl8152 can trigger device reset during reset which
potentially can result in a deadlock:
**** DPM device timeout after 10 seconds; 15 seconds until panic ****
Call Trace:
<TASK>
schedule+0x483/0x1370
schedule_preempt_disabled+0x15/0x30
__mutex_lock_common+0x1fd/0x470
__rtl8152_set_mac_address+0x80/0x1f0
dev_set_mac_address+0x7f/0x150
rtl8152_post_reset+0x72/0x150
usb_reset_device+0x1d0/0x220
rtl8152_resume+0x99/0xc0
usb_resume_interface+0x3e/0xc0
usb_resume_both+0x104/0x150
usb_resume+0x22/0x110
The problem is that rtl8152 resume calls reset under
tp->control mutex while reset basically re-enters rtl8152
and attempts to acquire the same tp->control lock once
again.
Reset INACCESSIBLE device outside of tp->control mutex
scope to avoid recursive mutex_lock() deadlock. |
| Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. Prior to version 8.2.6.3, a command injection vulnerability exists in the `/config/compare/<service>/<server_ip>/show` endpoint, allowed authenticated users to execute arbitrary system commands on the app host. The vulnerability exists in `app/modules/config/config.py` on line 362, where user input is directly formatted in the template string that is eventually executed. Version 8.2.6.3 fixes the issue. |
| PX4 is an open-source autopilot stack for drones and unmanned vehicles. Versions 1.17.0-rc2 and below are vulnerable to Stack-based Buffer Overflow through the MavlinkLogHandler, and are triggered via MAVLink log request. The LogEntry.filepath buffer is 60 bytes, but the sscanf function parses paths from the log list file with no width specifier, allowing a path longer than 60 characters to overflow the buffer. An attacker with MAVLink link access can trigger this by first creating deeply nested directories via MAVLink FTP, then requesting the log list. The flight controller MAVLink task crashes, losing telemetry and command capability and causing DoS. This issue has been fixed in this commit: https://github.com/PX4/PX4-Autopilot/commit/616b25a280e229c24d5cf12a03dbf248df89c474. |
| Postal is an open source SMTP server. Postal versions less than 3.3.5 had a HTML injection vulnerability that allowed unescaped data to be included in the admin interface. The primary way for unescaped data to be added is via the API's "send/raw" method. This could allow arbitrary HTML to be injected in to the page which may modify the page in a misleading way or allow for unauthorised javascript to be executed. Fixed in 3.3.5 and higher. |
| In the Linux kernel, the following vulnerability has been resolved:
linkwatch: use __dev_put() in callers to prevent UAF
After linkwatch_do_dev() calls __dev_put() to release the linkwatch
reference, the device refcount may drop to 1. At this point,
netdev_run_todo() can proceed (since linkwatch_sync_dev() sees an
empty list and returns without blocking), wait for the refcount to
become 1 via netdev_wait_allrefs_any(), and then free the device
via kobject_put().
This creates a use-after-free when __linkwatch_run_queue() tries to
call netdev_unlock_ops() on the already-freed device.
Note that adding netdev_lock_ops()/netdev_unlock_ops() pair in
netdev_run_todo() before kobject_put() would not work, because
netdev_lock_ops() is conditional - it only locks when
netdev_need_ops_lock() returns true. If the device doesn't require
ops_lock, linkwatch won't hold any lock, and netdev_run_todo()
acquiring the lock won't provide synchronization.
Fix this by moving __dev_put() from linkwatch_do_dev() to its
callers. The device reference logically pairs with de-listing the
device, so it's reasonable for the caller that did the de-listing
to release it. This allows placing __dev_put() after all device
accesses are complete, preventing UAF.
The bug can be reproduced by adding mdelay(2000) after
linkwatch_do_dev() in __linkwatch_run_queue(), then running:
ip tuntap add mode tun name tun_test
ip link set tun_test up
ip link set tun_test carrier off
ip link set tun_test carrier on
sleep 0.5
ip tuntap del mode tun name tun_test
KASAN report:
==================================================================
BUG: KASAN: use-after-free in netdev_need_ops_lock include/net/netdev_lock.h:33 [inline]
BUG: KASAN: use-after-free in netdev_unlock_ops include/net/netdev_lock.h:47 [inline]
BUG: KASAN: use-after-free in __linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245
Read of size 8 at addr ffff88804de5c008 by task kworker/u32:10/8123
CPU: 0 UID: 0 PID: 8123 Comm: kworker/u32:10 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: events_unbound linkwatch_event
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x156/0x4c9 mm/kasan/report.c:482
kasan_report+0xdf/0x1a0 mm/kasan/report.c:595
netdev_need_ops_lock include/net/netdev_lock.h:33 [inline]
netdev_unlock_ops include/net/netdev_lock.h:47 [inline]
__linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245
linkwatch_event+0x8f/0xc0 net/core/link_watch.c:304
process_one_work+0x9c2/0x1840 kernel/workqueue.c:3257
process_scheduled_works kernel/workqueue.c:3340 [inline]
worker_thread+0x5da/0xe40 kernel/workqueue.c:3421
kthread+0x3b3/0x730 kernel/kthread.c:463
ret_from_fork+0x754/0xaf0 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
</TASK>
================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count()
In iscsit_dec_session_usage_count(), the function calls complete() while
holding the sess->session_usage_lock. Similar to the connection usage count
logic, the waiter signaled by complete() (e.g., in the session release
path) may wake up and free the iscsit_session structure immediately.
This creates a race condition where the current thread may attempt to
execute spin_unlock_bh() on a session structure that has already been
deallocated, resulting in a KASAN slab-use-after-free.
To resolve this, release the session_usage_lock before calling complete()
to ensure all dereferences of the sess pointer are finished before the
waiter is allowed to proceed with deallocation. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: correctly handle FDA objects of length zero
Fix a bug where an empty FDA (fd array) object with 0 fds would cause an
out-of-bounds error. The previous implementation used `skip == 0` to
mean "this is a pointer fixup", but 0 is also the correct skip length
for an empty FDA. If the FDA is at the end of the buffer, then this
results in an attempt to write 8-bytes out of bounds. This is caught and
results in an EINVAL error being returned to userspace.
The pattern of using `skip == 0` as a special value originates from the
C-implementation of Binder. As part of fixing this bug, this pattern is
replaced with a Rust enum.
I considered the alternate option of not pushing a fixup when the length
is zero, but I think it's cleaner to just get rid of the zero-is-special
stuff.
The root cause of this bug was diagnosed by Gemini CLI on first try. I
used the following prompt:
> There appears to be a bug in @drivers/android/binder/thread.rs where
> the Fixups oob bug is triggered with 316 304 316 324. This implies
> that we somehow ended up with a fixup where buffer A has a pointer to
> buffer B, but the pointer is located at an index in buffer A that is
> out of bounds. Please investigate the code to find the bug. You may
> compare with @drivers/android/binder.c that implements this correctly. |
| Malicious configuration can lead to unauthorized file access in Apache Livy.
This issue affects Apache Livy 0.7.0 and 0.8.0 when connecting to Apache Spark 3.1 or later.
A request that includes a Spark configuration value supported from Apache Spark version 3.1 can lead to users gaining access to files they do not have permissions to.
For the vulnerability to be exploitable, the user needs to have access to Apache Livy's REST or JDBC interface and be able to send requests with arbitrary Spark configuration values.
Users are recommended to upgrade to version 0.9.0 or later, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/dmem: avoid pool UAF
An UAF issue was observed:
BUG: KASAN: slab-use-after-free in page_counter_uncharge+0x65/0x150
Write of size 8 at addr ffff888106715440 by task insmod/527
CPU: 4 UID: 0 PID: 527 Comm: insmod 6.19.0-rc7-next-20260129+ #11
Tainted: [O]=OOT_MODULE
Call Trace:
<TASK>
dump_stack_lvl+0x82/0xd0
kasan_report+0xca/0x100
kasan_check_range+0x39/0x1c0
page_counter_uncharge+0x65/0x150
dmem_cgroup_uncharge+0x1f/0x260
Allocated by task 527:
Freed by task 0:
The buggy address belongs to the object at ffff888106715400
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 64 bytes inside of
freed 512-byte region [ffff888106715400, ffff888106715600)
The buggy address belongs to the physical page:
Memory state around the buggy address:
ffff888106715300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888106715380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888106715400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888106715480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888106715500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
The issue occurs because a pool can still be held by a caller after its
associated memory region is unregistered. The current implementation frees
the pool even if users still hold references to it (e.g., before uncharge
operations complete).
This patch adds a reference counter to each pool, ensuring that a pool is
only freed when its reference count drops to zero. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: Intel-thc-hid: Intel-thc: Add safety check for reading DMA buffer
Add DMA buffer readiness check before reading DMA buffer to avoid
unexpected NULL pointer accessing. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: preserve error state in block data length handler
When a block read returns an invalid length, zero or >I2C_SMBUS_BLOCK_MAX,
the length handler sets the state to IMX_I2C_STATE_FAILED. However,
i2c_imx_master_isr() unconditionally overwrites this with
IMX_I2C_STATE_READ_CONTINUE, causing an endless read loop that overruns
buffers and crashes the system.
Guard the state transition to preserve error states set by the length
handler. |
| There is a memory corruption vulnerability due to an out-of-bounds read when loading a corrupted file in Digilent DASYLab. This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted file. This vulnerability affects all versions of Digilent DASYLab. |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to 9.6.0-alpha.15 and 8.6.41, an attacker who is allowed to upload files can bypass the file extension filter by appending a MIME parameter (e.g. `;charset=utf-8`) to the `Content-Type` header. This causes the extension validation to fail matching against the blocklist, allowing active content to be stored and served under the application's domain. In addition, certain XML-based file extensions that can render scripts in web browsers are not included in the default blocklist. This can lead to stored XSS attacks, compromising session tokens, user credentials, or other sensitive data accessible via the browser's local storage. The fix in versions 9.6.0-alpha.15 and 8.6.41 strips MIME parameters from the `Content-Type` header before validating the file extension against the blocklist. The default blocklist has also been extended to include additional XML-based extensions (`xsd`, `rng`, `rdf`, `rdf+xml`, `owl`, `mathml`, `mathml+xml`) that can render active content in web browsers. Note that the `fileUpload.fileExtensions` option is intended to be configured as an allowlist of file extensions that are valid for a specific application, not as a denylist. The default denylist is provided only as a basic default that covers most common problematic extensions. It is not intended to be an exhaustive list of all potentially dangerous extensions. Developers should not rely on the default value, as new extensions that can render active content in browsers might emerge in the future. As a workaround, configure the `fileUpload.fileExtensions` option to use an allowlist of only the file extensions that your application needs, rather than relying on the default blocklist. |
| There is a memory corruption vulnerability due to an out-of-bounds read when loading a corrupted file in Digilent DASYLab. This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted file. This vulnerability affects all versions of Digilent DASYLab. |
| There is a memory corruption vulnerability due to an out-of-bounds write when loading a corrupted DSB file in Digilent DASYLab. This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted .DSB file. This vulnerability affects all versions of Digilent DASYLab. |
| There is a memory corruption vulnerability due to an out-of-bounds write when loading a corrupted file in Digilent DASYLab. This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted file. This vulnerability affects all versions of Digilent DASYLab. |
| OpenCTI is an open source platform for managing cyber threat intelligence knowledge and observables. Prior to 6.8.16, the OpenCTI platform’s data ingestion feature accepts user-supplied URLs without validation and uses the Axios HTTP client with its default configuration (allowAbsoluteUrls: true). This allows attackers to craft requests to arbitrary endpoints, including internal services, because Axios will accept and process absolute URLs. This results in a semi-blind SSRF, as responses may not be fully visible but can still impact internal systems. This vulnerability is fixed in 6.8.16. |
| FastGPT is an AI Agent building platform. In 4.14.7 and earlier, FastGPT's Python Sandbox (fastgpt-sandbox) includes guardrails intended to prevent file writes (static detection + seccomp). These guardrails are bypassable by remapping stdout (fd 1) to an arbitrary writable file descriptor using fcntl. After remapping, writing via sys.stdout.write() still satisfies the seccomp rule write(fd==1), enabling arbitrary file creation/overwrite inside the sandbox container despite the intended no file writes restriction. |
| Winter is a free, open-source content management system (CMS) based on the Laravel PHP framework. Prior to 1.0.477, 1.1.12, and 1.2.12, Winter CMS allowed authenticated backend users to escalate their accounts level of access to the system by modifying the roles / permissions assigned to their account through specially crafted requests to the backend while logged in. To actively exploit this security issue, an attacker would need access to the Backend with a user account with any level of access. This vulnerability is fixed in 1.0.477, 1.1.12, and 1.2.12. |
| Hyperterse is a tool-first MCP framework for building AI-ready backend surfaces from declarative config. Prior to v2.2.0, the search tool allows LLMs to search for tools using natural language. While returning results, Hyperterse also returned the raw SQL queries, exposing statements which were supposed to be executed under the hood, and protected from being displayed publicly. This issue has been fixed as of v2.2.0. |
