Export limit exceeded: 402905 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (402905 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-107220 | 2026-10-07 | 6.5 Medium | ||
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.7.1 to 2.11.0, mergeCellsParser leaves the cached rectangle empty for an empty mergeCell ref and then passes that empty slice to cellInRange without a length check. GetCellValue reaches mergeCellsParser, which passes an empty rectangle derived from the mergeCell ref attribute into cellInRange. When a crafted worksheet contains an empty mergeCell ref and a non-streaming cell API reads the worksheet, cellInRange indexes four positions in an empty slice, allowing an attacker to panic on the first affected cell operation. No fixed version is available as of this review. | ||||
| CVE-2026-107219 | 2026-10-07 | 7.5 High | ||
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.3.1 to 2.11.0, agile decryption accepts an attacker-controlled spinCount and performs that many password-key derivation iterations before verifier validation. OpenFile reaches agileDecrypt, which passes the unbounded spinCount to convertPasswdToKey before password verification. When a crafted OLE encrypted-workbook header supplies an excessive spinCount and the file is opened, the key-derivation loop performs unbounded attacker-selected work and cannot be cancelled, allowing an attacker to consume a CPU core for an attacker-controlled duration. No fixed version is available as of this review. | ||||
| CVE-2026-20173 | 1 Cisco | 1 Nx-os Software | 2026-10-07 | 5.8 Medium |
| A vulnerability in Cisco NX-OS Software could allow an unauthenticated, remote attacker to exhaust system resources, causing a denial of service (DoS) condition. This vulnerability exists because rate limiting was improperly applied to some protocols. An attacker could exploit this vulnerability by sending a high rate of UDP or TCP connections to a data plane interface on an affected device. A successful exploit could allow the attacker to cause instability to various routing and control plane protocols through some packet loss and temporary disruptions, causing a DoS condition. This DoS condition will clear without manual intervention soon after the high rate of traffic is stopped. | ||||
| CVE-2026-76452 | 2026-10-07 | 4.9 Medium | ||
| A vulnerability in the web-based management interface of Cisco License On-Prem, formerly Cisco Smart Software Manager On-Prem (SSM On-Prem), could allow an authenticated, remote attacker to conduct SQL injection attacks against an affected application. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to read additional contents of the internal database of an affected application that should not normally be accessible to administrative users, thus impacting system confidentiality. To exploit this vulnerability, the attacker must have valid administrative user credentials on the affected application. | ||||
| CVE-2026-107212 | 2026-10-07 | 7.5 High | ||
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.1.0 to 2.11.0, Rows.Columns accepts a look-ahead row number above TotalRows without applying the limit enforced by Rows.Next. File.GetRows relies on Rows.Next and Rows.Columns, but Rows.Columns consumes the row r attribute without the limit check in Rows.Next. When a crafted worksheet places an oversized row number after an ordinary valid row and the application calls GetRows or iterates Rows, the iterator advances through every missing row number instead of rejecting the workbook, allowing an attacker to consume a CPU core for an attacker-controlled duration. No fixed version is available as of this review. | ||||
| CVE-2026-107204 | 1 Lmcache | 1 Lmcache | 2026-10-07 | 9.8 Critical |
| LMCache through 0.5.5 contains an unauthenticated remote code execution vulnerability that allows remote attackers to execute Python code by posting scripts to the /run_script endpoint. Attackers can recover real builtins through the injected FastAPI app object, bypassing the guarded __import__, to import os and run operating system commands as the LMCache process. | ||||
| CVE-2026-107218 | 2026-10-07 | 5.3 Medium | ||
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.10.1 to 2.11.0, RIGHT validates the requested length with UTF-16 code-unit counts but slices a rune array using Unicode code-point counts. RIGHT reaches leftRight through CalcCellValue, where countUTF16String validates one unit but utf8.RuneCountInString supplies the slice index in another. When RIGHT evaluates supplementary-plane text with a requested character count between the rune count and UTF-16 code-unit count, the inconsistent units produce a negative rune-slice index, allowing an attacker to panic during formula evaluation. No fixed version is available as of this review. | ||||
| CVE-2026-107217 | 2026-10-07 | 7.5 High | ||
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.0.0 to 2.11.0 in github.com/xuri/excelize/v2 and from 1.1.0 to 1.4.1 in github.com/xuri/excelize, ColumnNameToNumber accumulates a bijective base-26 value in int64 without detecting overflow, allowing an invalid long column name to wrap to zero with no error. ColumnNameToNumber accepts the overflowing name VGWQHXLSDVIKWV, after which checkSheetR0 and xlsxWorksheet.checkRow use the wrapped column value as an index. When a crafted worksheet uses an overflowing column name in a row normalized by checkSheetR0 or checkRow, the wrapped zero column becomes a negative slice index during worksheet normalization, allowing an attacker to panic and terminate the calling process. No fixed version is available as of this review. | ||||
| CVE-2026-107313 | 2026-10-07 | 4.2 Medium | ||
| pgjdbc, the PostgreSQL JDBC Driver, versions 42.7.4 and 42.7.5 can send the previous contents of the GSS send buffer in place of the first part of a value on a connection with GSS encryption (gssEncMode=prefer or require), and the server stores the value without an error. The buffer is 16320 bytes with MIT Kerberos. The stored value then holds bytes of the messages the driver sent just before it on the same connection, such as the statement's SQL text, its other parameters, and earlier rows of the same batch, instead of the bytes the application supplied. Values at least as long as the buffer are affected when the driver writes them from a byte array: bind parameters set with setString, setBytes, or a ByteStreamWriter, CopyIn.writeToCopy, and LargeObject.write. Most such writes fail with an ArrayIndexOutOfBoundsException instead. The default, gssEncMode=allow, does not start GSS encryption, and connections without GSS encryption are not affected. Versions 42.7.3 and earlier are not affected, and 42.7.6 fixes the problem. | ||||
| CVE-2026-97146 | 2026-10-07 | N/A | ||
| Apache YuniKorn 1.9.0 and earlier allows bypassing the check for the user annotation by setting a secondary label on the pod. If the pod has the label 'app=yunikorn' the checks limiting the user annotation content are not run. The label is used to identify the YuniKorn application itself in the deployments. The bypass allows any user to specify an arbitrary user info annotation. The arbitrary user information could allow access to a queue that the user normally would not have access to. Quota usage for the queue might be impacted if the application runs in the incorrect queue. User based quota enforcement is also based on the user annotation. User quota tracking could be side stepped even if the application runs in the correct queue. Users are recommended to upgrade to version 1.10.0, which fixes this issue. | ||||
| CVE-2026-96408 | 2026-10-07 | N/A | ||
| A code injection vulnerability exists in the upgrade script of Movable Type, which may allow an unauthenticated attacker to execute an arbitrary Perl script or an SQL query on the affected product. | ||||
| CVE-2026-95534 | 2026-10-07 | 8.8 High | ||
| Deserialization of Untrusted Data vulnerability in Unlimited Elements Unlimited Elements For Elementor (Free Widgets, Addons, Templates) allows Object Injection. This issue affects Unlimited Elements For Elementor (Free Widgets, Addons, Templates): from n/a through 2.0.19. | ||||
| CVE-2026-92532 | 1 Bugtracker.net | 1 Bugtracker.net | 2026-10-07 | N/A |
| Unrestricted file upload vulnerability in the BugTracker.NET attachment functionality. An authenticated user with administrator privileges could modify the application configuration to store files in a directory accessible via the web interface. Due to the lack of proper file extension validation, an attacker could upload a malicious ASPX file and subsequently execute it on the server. A successful exploit could allow arbitrary code execution with the privileges of the account used by the web service. | ||||
| CVE-2026-92415 | 2026-10-07 | N/A | ||
| — Use of Externally-Controlled Input to Select Classes or Code vulnerability in Apache Jackrabbit's WebDAV/Davex client. A malicious WebDAV/DavEx server, or an attacker able to intercept the connection, can cause the client to instantiate arbitrary classes from its classpath, which can lead to arbitrary file creation or truncation. Only applications that use jackrabbit-spi2dav (directly or through jackrabbit-jcr2dav) to connect to a remote repository are affected. Jackrabbit servers are not affected. Category: unsafe reflection on wire data (HIGH). This issue affects Apache Jackrabbit: from 2.23.0 through 2.23.5, from 2.22.0 through 2.22.4, from 2.20.0 through 2.20.17. Users are recommended to upgrade to versions 2.23.6, 2.22.5, or 2.20.18 which fix the issue. | ||||
| CVE-2026-92393 | 2026-10-07 | N/A | ||
| Apache YuniKorn 1.9.0 and earlier does not implement label and user annotation checks for workload UPDATE action bypassing all checks. Workloads in YuniKorn are defined as the following Kubernetes objects: "deployments", "replicasets", "statefulsets", "daemonsets", "jobs", "cronjobs". The CREATE action correctly enforces the checks for all object types. The bypass allows any user to specify an arbitrary user info annotation. The same bypass also allows changing the application ID for the workload. The combination of the two applied in one UPDATE could allow access to a queue that the user normally would not have access to. Quota usage for the queue might be impacted if the application runs in the incorrect queue. User based quota enforcement is also based on the user annotation. User quota tracking could be side stepped even if the application runs in the correct queue. Users are recommended to upgrade to version 1.10.0, which fixes this issue. | ||||
| CVE-2026-79818 | 1 Hewlett Packard Enterprise (hpe) | 1 Clearpass Policy Manager (cppm) | 2026-10-07 | 5.3 Medium |
| A vulnerability in an API interface of ClearPass Policy Manager could allow an unauthenticated remote attacker to circumvent existing authentication controls. Successful exploitation could allow an attacker to obtain sensitive information from the affected system. | ||||
| CVE-2026-79817 | 1 Hewlett Packard Enterprise (hpe) | 1 Clearpass Policy Manager (cppm) | 2026-10-07 | 5.5 Medium |
| A sensitive information disclosure vulnerability exists in the client software of HPE Networking ClearPass Policy Manager. Successful exploitation could allow an attacker with local access to the affected system to obtain sensitive information. | ||||
| CVE-2026-79816 | 1 Hewlett Packard Enterprise (hpe) | 1 Clearpass Policy Manager (cppm) | 2026-10-07 | 5.4 Medium |
| A vulnerability in a client interface of HPE Networking ClearPass Policy Manager could allow an unauthenticated remote attacker to conduct a DOM-based cross-site scripting (XSS) attack against a user of the affected client interface. Successful exploitation could allow an attacker to execute arbitrary script code in a victim's browser context within the affected client interface. | ||||
| CVE-2026-78243 | 2026-10-07 | N/A | ||
| Apache YuniKorn 1.8.0 and later, if configured with the LDAP group resolver, crashes due to an out of bounds read processing group membership entries.If the LDAP server returns a group membership entry, memberOf attribute, for a user specified in the pod the server crashes if a membership record does not start with "CN=". This only affects install that have the non default LDAP group provider configured. Users are recommended to upgrade to version 1.10.0, which fixes this issue. | ||||
| CVE-2026-76741 | 2026-10-07 | 6.5 Medium | ||
| Buffer overflow vulnerabilities exist in the affected interface of AOS-S. Successful exploitation could allow an authenticated remote attacker to cause a denial-of-service condition on the affected system. | ||||