| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix integer overflow in tipc_recvmsg() and tipc_recvstream()
In tipc_recvmsg(), the copy length is computed as:
copy = min_t(int, dlen - offset, buflen);
buflen is size_t but min_t(int, ...) casts it to int. When buflen
exceeds INT_MAX (e.g. 0xFFFFFFFF via io_uring provided buffers), it
wraps negative, wins the comparison, and the negative copy length
propagates to simple_copy_to_iter() where int-to-size_t promotion
makes it SIZE_MAX, triggering a WARN_ON. tipc_recvstream() has the
same pattern.
Kernel panic - not syncing: kernel: panic_on_warn set ...
RIP: 0010:simple_copy_to_iter+0x9e/0xd0 (net/core/datagram.c:521)
Call Trace:
__skb_datagram_iter+0x123/0x8b0 (net/core/datagram.c:402)
skb_copy_datagram_iter+0x77/0x1a0 (net/core/datagram.c:534)
tipc_recvmsg+0x3d7/0xe80 (net/tipc/socket.c:1934)
io_recvmsg+0x47e/0xda0
Fix by changing min_t(int, ...) to min_t(size_t, ...) in both
functions. The result is always <= (dlen - offset), which is bounded
by TIPC maximum message size (0x1ffff bytes), so the implicit
narrowing on assignment to int copy is always safe. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: fix deadlock between reset thread and remove
pci_reset_function() acquires device_lock before performing the reset.
pdsc_remove() is called by the PCI core with device_lock already held.
If pdsc_pci_reset_thread() is running when pdsc_remove() is called,
destroy_workqueue() will block waiting for the work to complete, while
the work is blocked waiting for device_lock - deadlock.
Use pci_try_reset_function() which uses pci_dev_trylock() internally.
This acquires both the device lock and the PCI config access lock
without blocking - if either lock is contended, it returns -EAGAIN
immediately. This avoids the deadlock while also ensuring proper
config space access serialization during the reset.
The pci_dev_get/put calls are also removed as they were unnecessary -
the driver-owned workqueue is destroyed in pdsc_remove(), guaranteeing
the work completes before remove returns. The PCI core holds its
reference to pci_dev throughout the entire unbind sequence. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix possible NULL-pointer deref in mt7996_mcu_sta_bfer_eht()
mt76_connac_get_eht_phy_cap routine can theoretically return NULL so
check cap pointer before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: hvs/v3d: Fix null dereference in unbind
The hvs and v3d drivers use dev_get_drvdata(master) in their unbind
functions. Since the vc4-drm gets removed before its dependent drivers
(vc4_hvs/vc4_v3d) the vc4_hvs_unbind/vc4_v3d_unbind functions try to
get drvdata of its master and fails with a null dereference error.
Use the data pointer passed to the unbind functions directly instead of
dev_get_drvdata(master). This avoids using potentially freed memory. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: analogix_dp: Add missing error check for platform_get_resource()
Add missing error check for platform_get_resource() return value to
prevent NULL pointer dereference when memory resource is not available. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix max_vport related crash on allocation error during init
Set adapter->max_vports only after successful allocation of vports, netdevs
and vport_config buffers. This fixes possible crashes on reset or rmmod,
following failed allocation on init
[ 305.981402] idpf 0000:83:00.0: enabling device (0100 -> 0102)
[ 305.994464] idpf 0000:83:00.0: Device HW Reset initiated
[ 320.416872] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 320.416918] #PF: supervisor read access in kernel mode
[ 320.416942] #PF: error_code(0x0000) - not-present page
[ 320.416963] PGD 2099657067 P4D 0
[ 320.416983] Oops: Oops: 0000 [#1] SMP NOPTI
...
[ 320.417093] RIP: 0010:idpf_remove+0x118/0x200 [idpf]
[ 320.417130] Code: 8b bb 98 09 00 00 e8 17 0f 5b e5 48 8b bb e8 08 00 00 e8 0b 0f 5b e5 66 83 bb 28 06 00 00 00 48 8b bb 20 06 00 00 74 49 31 ed <48> 8b 04 ef 48 85 c0 74 2f 48 8b 78 20 e8 66 58 91 e5 48 8b 83 20
[ 320.417183] RSP: 0018:ff7322212903fdb8 EFLAGS: 00010246
[ 320.417205] RAX: 0000000000000000 RBX: ff4463de40300000 RCX: ff7322212903fd4c
[ 320.417228] RDX: 0000000000000001 RSI: ffffffffa7f7d100 RDI: 0000000000000000
[ 320.417250] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
[ 320.417272] R10: 0000000000000001 R11: ff4463de3a638f58 R12: ff4463be89ac7000
[ 320.417294] R13: ff4463be89ac7198 R14: ff4463be94fc7198 R15: ffffffffc0f10f20
[ 320.417317] FS: 00007f963c0e6740(0000) GS:ff4463fdd65d8000(0000) knlGS:0000000000000000
[ 320.417342] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 320.417362] CR2: 0000000000000000 CR3: 00000020ba674002 CR4: 0000000000773ef0
[ 320.417385] PKRU: 55555554
[ 320.417398] Call Trace:
[ 320.417412] <TASK>
[ 320.417429] pci_device_remove+0x42/0xb0
[ 320.417459] device_release_driver_internal+0x1a9/0x210
[ 320.417492] driver_detach+0x4b/0x90
[ 320.417516] bus_remove_driver+0x70/0x100
[ 320.417539] pci_unregister_driver+0x2e/0xb0
[ 320.417564] __do_sys_delete_module.constprop.0+0x190/0x2f0
[ 320.417592] ? kmem_cache_free+0x31e/0x550
[ 320.417619] ? lockdep_hardirqs_on_prepare+0xde/0x190
[ 320.417644] ? do_syscall_64+0x38/0x6b0
[ 320.417665] do_syscall_64+0xc8/0x6b0
[ 320.417683] ? clear_bhb_loop+0x30/0x80
[ 320.417706] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 320.417727] RIP: 0033:0x7f963bb30beb |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: cdns-dsi: Replace deprecated UNIVERSAL_DEV_PM_OPS()
The deprecated UNIVERSAL_DEV_PM_OPS() macro uses the provided callbacks
for both runtime PM and system sleep. This causes the DSI clocks to be
disabled twice: once during runtime suspend and again during system
suspend, resulting in a WARN message from the clock framework when
attempting to disable already-disabled clocks.
[ 84.384540] clk:231:5 already disabled
[ 84.388314] WARNING: CPU: 2 PID: 531 at /drivers/clk/clk.c:1181 clk_core_disable+0xa4/0xac
...
[ 84.579183] Call trace:
[ 84.581624] clk_core_disable+0xa4/0xac
[ 84.585457] clk_disable+0x30/0x4c
[ 84.588857] cdns_dsi_suspend+0x20/0x58 [cdns_dsi]
[ 84.593651] pm_generic_suspend+0x2c/0x44
[ 84.597661] ti_sci_pd_suspend+0xbc/0x15c
[ 84.601670] dpm_run_callback+0x8c/0x14c
[ 84.605588] __device_suspend+0x1a0/0x56c
[ 84.609594] dpm_suspend+0x17c/0x21c
[ 84.613165] dpm_suspend_start+0xa0/0xa8
[ 84.617083] suspend_devices_and_enter+0x12c/0x634
[ 84.621872] pm_suspend+0x1fc/0x368
To address this issue, replace UNIVERSAL_DEV_PM_OPS() with
RUNTIME_PM_OPS(). Bridge and panel drivers should only deal with runtime
PM, as the DRM framework manages system-wide power transitions through
the bridge enable() and disable() hooks. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Count paired job fence as dependency in prepare_job()
The DRM scheduler's prepare_job() callback counts the remaining
non-signaled native dependencies for a job, preventing job submission
until those (plus job data and fence update) can fit in the job queue's
CCCB.
This means checking which dependencies can be waited upon in the
firmware, i.e. whether they are backed by a UFO object, i.e. whether
their drm_sched_fence::parent has been assigned to a
pvr_queue_fence::base fence. That happens when the job owning the fence
is submitted to the firmware.
Paired geometry and fragment jobs are submitted at the same time, which
means the dependency between them can't be checked this way before
submission.
Update job_count_remaining_native_deps() to take into account the
dependency between paired jobs.
This fixes cases where prepare_job() underestimated the space left in
an almost full fragment CCCB, wrongly unblocking run_job(), which then
returned early without writing the full sequence of commands to the
CCCB.
The above lead to kernel warnings such as the following and potentially
job timeouts (depending on waiters on the missing commands):
[ 375.702979] WARNING: drivers/gpu/drm/imagination/pvr_cccb.c:178 at pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr], CPU#1: kworker/u16:3/47
[ 375.703160] Modules linked in:
[ 375.703571] CPU: 1 UID: 0 PID: 47 Comm: kworker/u16:3 Tainted: G W 7.0.0-rc2-g817eb6b11ad5 #40 PREEMPT
[ 375.703613] Tainted: [W]=WARN
[ 375.703627] Hardware name: Texas Instruments AM625 SK (DT)
[ 375.703645] Workqueue: powervr-sched drm_sched_run_job_work [gpu_sched]
[ 375.703741] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 375.703764] pc : pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr]
[ 375.703847] lr : pvr_queue_submit_job_to_cccb+0x578/0xa70 [powervr]
[ 375.703921] sp : ffff800084a97650
[ 375.703934] x29: ffff800084a97740 x28: 0000000000000958 x27: ffff80008565d000
[ 375.703979] x26: 0000000000000030 x25: ffff800084a97680 x24: 0000000000001000
[ 375.704017] x23: ffff800084a97820 x22: 1ffff00010952ecc x21: 0000000000000008
[ 375.704056] x20: 00000000000006a8 x19: ffff00002ff7da88 x18: 0000000000000000
[ 375.704093] x17: 0000000020020000 x16: 0000000000020000 x15: 0000000000000000
[ 375.704132] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 375.704168] x11: 000000000000f2f2 x10: 00000000f3000000 x9 : 00000000f3f3f3f3
[ 375.704206] x8 : 00000000f2f2f200 x7 : ffff700010952ecc x6 : 0000000000000008
[ 375.704243] x5 : 0000000000000000 x4 : 1ffff00010acba00 x3 : 0000000000000000
[ 375.704279] x2 : 0000000000000007 x1 : 0000000000000fff x0 : 000000000000002f
[ 375.704317] Call trace:
[ 375.704331] pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] (P)
[ 375.704411] pvr_queue_submit_job_to_cccb+0x578/0xa70 [powervr]
[ 375.704487] pvr_queue_run_job+0x3a4/0x990 [powervr]
[ 375.704562] drm_sched_run_job_work+0x580/0xd48 [gpu_sched]
[ 375.704623] process_one_work+0x520/0x1288
[ 375.704658] worker_thread+0x3f0/0xb3c
[ 375.704680] kthread+0x334/0x3d8
[ 375.704706] ret_from_fork+0x10/0x20
[ 375.704736] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: detect_link_and_local_sink: DP alt mode timeout path leaks prev_sink reference
prev_sink is unconditionally retained via dc_sink_retain at function
entry, but the DP alt mode timeout path inside SIGNAL_TYPE_DISPLAY_PORT
returns false without releasing prev_sink. All other return paths in the
function correctly call dc_sink_release(prev_sink), making this the only
missing cleanup.
(cherry picked from commit 45510cf662dcf46b5d8926d454f338809f107b9d) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sysfb: Avoid possible truncation with calculating visible size
Calculating the visible size of the system framebuffer can result in
truncation of the result. The calculation uses 32-bit arithmetics,
which can overflow if the values for height and stride are large. Fix
the issue by multiplying with mul_u32_u32(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate CP_GFX_SHADOW chunk size in CS pass1
Add a minimum-length check for the AMDGPU_CHUNK_ID_CP_GFX_SHADOW chunk in
amdgpu_cs_pass1(), matching the gate already present for the IB, FENCE and
BO_HANDLES chunk types.
The CP_GFX_SHADOW case previously shared a bare break with the dependency
and syncobj chunk types, which do not dereference a fixed-size struct. When
userspace submits this chunk with length_dw == 0, vmemdup_array_user() is
called with size 0 and returns ZERO_SIZE_PTR, which passes the IS_ERR()
check. amdgpu_cs_p2_shadow() then dereferences chunk->kdata as a struct
drm_amdgpu_cs_chunk_cp_gfx_shadow (reading shadow->flags), faulting on the
ZERO_SIZE_PTR and causing a NULL-pointer dereference.
This is reachable by an unprivileged process in the render group. Reject
undersized chunks with -EINVAL during pass1 so the bad submission is
rejected before pass2 ever dereferences the data.
(cherry picked from commit 7f61b2eef7415eccdb40850aca0de94211948657) |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Use sender devcom for MPV master-up
After PCIe DPC recovery, mlx5 reloads the affected functions and
replays multiport affiliation events. In the reported failure, the
first relevant device error was:
pcieport 0000:10:01.1: DPC: containment event
pcieport 0000:10:01.1: PCIe Bus Error: severity=Uncorrected (Fatal)
pcieport 0000:10:01.1: [ 5] SDES (First)
mlx5 recovered the PCI functions and resumed 0000:11:00.1. During
that resume, RDMA multiport binding replayed
MLX5_DRIVER_EVENT_AFFILIATION_DONE and mlx5e sent
MPV_DEVCOM_MASTER_UP. The host then panicked with:
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core]
RDI: 0000000000000000
Call trace included:
mlx5_devcom_comp_set_ready
mlx5e_devcom_event_mpv
mlx5_devcom_send_event
mlx5_ib_bind_slave_port
mlx5r_mp_probe
mlx5_pci_resume
MPV devcom registration publishes mlx5e private data to the component
peer list before mlx5e_devcom_init_mpv() stores the returned component
device in priv->devcom. A concurrent master-up event can therefore
reach a peer whose private data is visible but whose priv->devcom
backpointer is still NULL.
MPV_DEVCOM_MASTER_UP already carries the sender/master mlx5e private
data as event_data. The ready bit is stored on the shared devcom
component, not on an individual peer. Use the sender devcom when
marking the MPV component ready.
This preserves the readiness transition while avoiding a NULL
dereference of the peer devcom pointer during affiliation replay after
PCI error recovery. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/bios: range check LFP Data Block panel_type2
While the panel_type from LFP Data Block is range checked, panel_type2
is not. Add a few helpers for range checking, and use them to not only
check panel_type2, but also improve clarity and correctness in the panel
type selection.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
v2:
- Fix commit message typo (Michał)
- Add is_panel_type_pnp() (Ville)
(cherry picked from commit c9ebe5d2f25729d6cfbbb1235d640bf67f9275df) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix kernel panic during driver load failure
Avoid kernel panic if MES init fails during driver load. The KIQ ring is
falsely marked as ready as ASICs that use MES, KIQ is owned by MES.
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:gfx_v12_1_wait_reg_mem+0x5a/0x1f0 [amdgpu]
Call Trace:
gfx_v12_1_ring_emit_reg_write_reg_wait+0x1f/0x30 [amdgpu]
amdgpu_gmc_fw_reg_write_reg_wait+0xb2/0x190 [amdgpu]
amdgpu_gmc_flush_gpu_tlb+0x1cc/0x230 [amdgpu]
amdgpu_gart_invalidate_tlb+0x81/0xa0 [amdgpu]
amdgpu_gart_unbind+0x72/0x90 [amdgpu]
amdgpu_ttm_backend_unbind+0xa4/0xb0 [amdgpu]
amdgpu_ttm_tt_unpopulate+0x13/0xd0 [amdgpu]
amdttm_tt_unpopulate+0x29/0x70 [amdttm]
ttm_bo_put+0x1eb/0x360 [amdttm]
amdgpu_bo_free_kernel+0xf9/0x1f0 [amdgpu]
amdgpu_ih_ring_fini+0x5a/0x90 [amdgpu]
amdgpu_irq_fini_hw+0x58/0x80 [amdgpu]
amdgpu_device_fini_hw+0x4e0/0x5b0 [amdgpu]
amdgpu_driver_load_kms+0x60/0xa0 [amdgpu]
amdgpu_pci_probe+0x28e/0x6d0 [amdgpu]
pci_device_probe+0x19f/0x220
really_probe+0x1ed/0x340
driver_probe_device+0x1e/0x80
__driver_attach+0xd3/0x1a0
bus_for_each_dev+0x68/0xa0
bus_add_driver+0x19f/0x270
driver_register+0x5d/0xf0
do_one_initcall+0xac/0x200
do_init_module+0x1ec/0x280
__se_sys_finit_module+0x2de/0x310
do_syscall_64+0x6a/0x250
entry_SYSCALL_64_after_hwframe+0x4b/0x53
(cherry picked from commit 4623b958dd6da0f4c3026afdf330626a09ecb0f0) |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: fix peer refcount leak in TCP error paths
When either the TCP RX or TX error path calls ovpn_peer_hold() followed
by schedule_work(&peer->tcp.defer_del_work), and the work item is already
pending from the other path, schedule_work() returns false and the work
runs only once. Since ovpn_tcp_peer_del_work() calls ovpn_peer_put()
exactly once, the extra reference taken by the losing path is never
dropped, leaking the peer object.
The race window:
CPU0 (strparser/RX error): CPU1 (tcp_tx_work/TX error):
ovpn_peer_hold() <- refcnt+1 ovpn_peer_hold() <- refcnt+2
schedule_work() <- queued schedule_work() <- NO-OP
(work already pending)
ovpn_tcp_peer_del_work runs:
ovpn_peer_del()
ovpn_peer_put() <- refcnt+1
<- peer never freed
Fix by checking the return value of schedule_work() in both paths and
calling ovpn_peer_put() to drop the extra reference if the work was
already pending. ovpn_peer_hold() is kept unconditional in the TX path
as it cannot fail at that point. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gpusvm: Fix MM reference leak in drm_gpusvm_range_evict
If kvmalloc_array() fails in drm_gpusvm_range_evict(), the MM
reference acquired earlier is not released, resulting in a reference
leak.
Fix this by dropping the MM reference on the kvmalloc_array()
failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Account for NULL and handle pages in ttm_pool_backup
Pages in ttm_pool_backup can be NULL or backup handles
(ttm_backup_page_ptr_is_handle()), neither of which can be passed to
set_pages_array_wb() or freed. Add a dedicated WB pass before the
dma/purge loop that walks allocations using the same i += num_pages
stride, skipping NULL and handle entries, and calls set_pages_array_wb()
once per contiguous run of real pages. Apply the same NULL/handle guard
to the dma/purge loop.
Fixes the following oops:
Oops: general protection fault, kernel NULL pointer dereference 0x0: 0000 [#1] SMP NOPTI
RIP: 0010:__cpa_process_fault+0xf8/0x770
RSP: 0018:ffffc90000a87718 EFLAGS: 00010287
RAX: 0000000000000000 RBX: ffffc90000a87868 RCX: 0000000000000000
RDX: 0000000000001000 RSI: 0005088000000000 RDI: ffffffff827c5f34
RBP: 0005088000000000 R08: ffffc90000a877cb R09: ffffc90000a877d0
R10: 0000000000000000 R11: 000000000000001b R12: 000ffffffffff000
R13: ffffc90000a87868 R14: ffffc90000a87868 R15: ffff88815b882ae0
FS: 0000000000000000(0000) GS:ffff8884ec840000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f930b844000 CR3: 000000000262e003 CR4: 0000000008f70ef0
PKRU: 55555554
Call Trace:
<TASK>
__change_page_attr_set_clr+0x989/0xe90
? __purge_vmap_area_lazy+0x6c/0x3a0
? _vm_unmap_aliases+0x250/0x2a0
set_pages_array_wb+0x7f/0x120
ttm_pool_backup+0x4c9/0x5b0 [ttm]
? dma_resv_wait_timeout+0x3b/0xf0
ttm_tt_backup+0x32/0x60 [ttm]
ttm_bo_shrink+0x66/0x110 [ttm]
xe_bo_shrink_purge+0x12b/0x1b0 [xe]
xe_bo_shrink+0xbb/0x270 [xe]
__xe_shrinker_walk+0xf7/0x160 [xe]
xe_shrinker_walk+0x9d/0xc0 [xe]
xe_shrinker_scan+0x11f/0x210 [xe]
do_shrink_slab+0x13b/0x270
shrink_slab+0xf1/0x400
shrink_node+0x352/0x8a0
balance_pgdat+0x32c/0x700
kswapd+0x205/0x2f0
? __pfx_autoremove_wake_function+0x10/0x10
? __pfx_kswapd+0x10/0x10
kthread+0xd1/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x1b1/0x200
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
super: fix emergency thaw deadlock on frozen block devices
do_thaw_all_callback() calls bdev_thaw() while holding sb->s_umount
exclusively. If the block device was frozen via bdev_freeze() dropping
the last block layer freeze reference calls fs_bdev_thaw() which
reacquires s_umount:
do_thaw_all_callback(sb)
super_lock_excl(sb) # holds sb->s_umount
bdev_thaw(sb->s_bdev)
mutex_lock(&bdev->bd_fsfreeze_mutex)
# bd_fsfreeze_count drops 1 -> 0
bd_holder_ops->thaw == fs_bdev_thaw
get_bdev_super(bdev)
bdev_super_lock(bdev, true)
super_lock(sb, true)
down_write(&sb->s_umount) # same task: deadlock
The emergency thaw worker deadlocks against itself holding both
s_umount and bd_fsfreeze_mutex. That fscks any subsequent unmount,
freeze, or thaw of that filesystem and block device.
[ 81.878470] sysrq: Show Blocked State
[ 81.880140] task:kworker/0:1 state:D stack:0 pid:11 tgid:11 ppid:2 task_flags:0x4208060 flags:0x00080000
[ 81.884876] Workqueue: events do_thaw_all
[ 81.886656] Call Trace:
[ 81.887759] <TASK>
[ 81.888763] __schedule+0x579/0x1420
[ 81.890372] schedule+0x3a/0x100
[ 81.891794] schedule_preempt_disabled+0x15/0x30
[ 81.893848] rwsem_down_write_slowpath+0x1ea/0x900
[ 81.895191] ? __pfx_do_thaw_all_callback+0x10/0x10
[ 81.896528] down_write+0xbd/0xc0
[ 81.897505] super_lock+0x91/0x180
[ 81.898457] ? __mutex_lock+0xa99/0x1140
[ 81.900748] ? __mutex_unlock_slowpath+0x1f/0x400
[ 81.902069] bdev_super_lock+0x5b/0x150
[ 81.903132] get_bdev_super+0x10/0x60
[ 81.904042] fs_bdev_thaw+0x23/0xf0
[ 81.904755] bdev_thaw+0x82/0x100
[ 81.905484] do_thaw_all_callback+0x2c/0x50
[ 81.906298] __iterate_supers+0x5d/0x130
[ 81.907067] do_thaw_all+0x20/0x40
[ 81.907739] process_one_work+0x206/0x5e0
[ 81.908545] worker_thread+0x1e2/0x3c0
[ 81.909339] ? __pfx_worker_thread+0x10/0x10
[ 81.910171] kthread+0xf4/0x130
[ 81.910799] ? __pfx_kthread+0x10/0x10
[ 81.911528] ret_from_fork+0x2e2/0x3b0
[ 81.912259] ? __pfx_kthread+0x10/0x10
[ 81.913010] ret_from_fork_asm+0x1a/0x30
[ 81.913806] </TASK>
bdev_super_lock() even documents the violated requirement with
lockdep_assert_not_held(&sb->s_umount).
Acquiring bd_fsfreeze_mutex under s_umount also inverts the
bd_fsfreeze_mutex vs. s_umount ordering established by
bdev_{freeze,thaw}() and can thus ABBA against a concurrent block-layer
freeze even when the recursive path isn't hit.
Fix this by not holding s_umount around the bdev_thaw() loop at all. Pin
the superblock with an active reference instead as
filesystems_freeze_callback() does. The active reference keeps the
superblock from being shut down and so ->s_bdev stays valid without
holding s_umount. The block-layer-held freeze is dropped by
fs_bdev_thaw() with FREEZE_MAY_NEST | FREEZE_HOLDER_USERSPACE exactly as
a regular unfreeze would and thaw_super_locked() handles
filesystem-level freezes as before.
The emergency thaw path has deadlocked like this in one form or
another for a long long time but the current exclusively-held
shape dates back to commit [1] where thaw_bdev() already ended in
thaw_super() with s_umount held by do_thaw_all_callback(). |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix PTP Call Trace during PTP release
If a PF reset occurs when the PTP state is ICE_PTP_UNINIT, then
ice_ptp_rebuild() will update the state to ICE_PTP_ERROR. This will
result in the following PTP release call trace during driver unload:
kernel BUG at lib/list_debug.c:52!
ice_ptp_release+0x332/0x3c0 [ice]
ice_deinit_features.part.0+0x10e/0x120 [ice]
ice_remove+0x100/0x220 [ice]
This was observed when passing PF1 through to a VM. ice_ptp_init()
fails because ctrl_pf is NULL and sets the state to ICE_PTP_UNINIT.
Fix by detecting the ICE_PTP_UNINIT state in ice_ptp_rebuild() and
returning without error, preventing the invalid state transition to
ICE_PTP_ERROR. The only valid path to ICE_PTP_ERROR is from
ICE_PTP_RESETTING after a failed rebuild. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/mst: limit DP MST ESI service loop
The loop in intel_dp_check_mst_status() keeps servicing interrupts
originating from the sink without bound. Add an upper bound to the new
interrupts occurring during interrupt processing to not get stuck on
potentially stuck sink devices. Use arbitrary 32 tries to clear incoming
interrupts in one go.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
Note: The condition likely pre-dates the commit in the Fixes: tag, but
this is about as far back as a backport has any chance of
succeeding. Before that, the retry had a goto.
(cherry picked from commit b4ea5272133059acb493cc36599071a9e852ec2e) |
