| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: ohci: fix NULL pointer dereference in ar_context_release
During the error handling path of the driver's probe function, a NULL
pointer dereference can occur in ar_context_release().
When pci_probe() fails early (e.g., if pcim_enable_device() or MMIO mapping
fails), the devres cleanup mechanism invokes release_ohci(). This function
unconditionally calls ar_context_release() to clean up the asynchronous
receive contexts. However, if ar_context_init() was not yet called,
ctx->ohci remains NULL (as the fw_ohci structure is zero-initialized by
devres_alloc()).
ar_context_release() immediately dereferences ctx->ohci to get the dev
pointer before checking if the context was actually initialized, leading to
a crash:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:ar_context_release+0x3f/0x380 drivers/firewire/ohci.c:543
Call Trace:
release_ohci+0x3f/0x60 drivers/firewire/ohci.c:3567
release_nodes drivers/base/devres.c:546 [inline]
devres_release_all+0x1a8/0x260 drivers/base/devres.c:576
device_unbind_cleanup drivers/base/dd.c:597 [inline]
really_probe+0x451/0xae0 drivers/base/dd.c:772
To fix this, move the assignment of the dev pointer after the !ctx->buffer
check. If ctx->buffer is NULL, it indicates that the context was never
successfully initialized and there is nothing to release, safely avoiding
the dereference of the uninitialized ctx->ohci pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
regmap: sdw-mbq: don't call an unset readable_reg callback
regmap_sdw_mbq_poll_busy() decides whether to poll the Function Busy bit
by calling ctx->readable_reg(), which is a straight copy of
config->readable_reg. That callback is optional: regmap_readable() treats
a NULL ->readable_reg as "every register is readable", and drivers rely on
that. es9356 and tac5xx2-sdw both build an MBQ regmap without one.
Since commit ca1b11b36d82 ("regmap: sdw-mbq: Allow defers on undeferrable
controls") the poll runs on every -ENODATA, not only for Controls the
driver marked deferrable, so any of those devices answering
COMMAND_IGNORED takes the kernel through a NULL function pointer.
Treat a missing callback the way the rest of regmap does and poll. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain
tcf_action_exec() handles TC_ACT_GOTO_CHAIN by first checking
rcu_access_pointer(a->goto_chain) and then calling
tcf_action_goto_chain_exec(), which does a second, independent
rcu_dereference_bh(a->goto_chain) read and immediately dereferences
chain->filter_chain. A concurrent tcf_action_set_ctrlact() (e.g. the gact
replace path) can clear a->goto_chain between the two reads, so the second
read returns NULL and tcf_action_goto_chain_exec() dereferences NULL.
Fix the race by doing a single rcu_dereference_bh() read of a->goto_chain
in tcf_action_exec(), checking it once for NULL, and passing the resulting
chain pointer into tcf_action_goto_chain_exec(). This turns the split
check/use into a single check/use on one value. |
| Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, and FW1060.00 through FW1060.80 is affected by a vulnerability in the host firmware boot process image validation path. An attacker with service access to the service processor can supply a maliciously crafted code update image, allowing arbitrary code to be executed on the host system. Successful exploitation could result in a confidentiality, integrity, and availability impact to the affected host system. |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7 (patched in 13.6.12 (LTS) and 13.9.0 (STS)), allow a physically proximate attacker to escalate privileges by booting from a USB device with a valid root filesystem. This occurs because of insecure default settings in the Legacy GRUB Bootloader. |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7 (patched in 13.6.12 (LTS) and 13.9.0 (STS)), might allow a physically proximate attacker to gain access to the EOL legacy bootloader. |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7 (patched in 13.6.12 (LTS) and 13.9.0 (STS)), allow a physically proximate attacker to escalate privileges by editing the Legacy GRUB bootloader configuration to start a root shell upon boot of the host OS. This is called F06. |
| libgit2 versions before 1.8.7 and 1.9.0 before 1.9.7 built with the libssh2 SSH backend (USE_SSH=libssh2) contain a shell command injection vulnerability that allows remote attackers to execute arbitrary commands on an SSH server by supplying a repository path containing unescaped shell metacharacters such as single quotes, semicolons, or pipes. The gen_proto() function in ssh_libssh2.c inserts the repository path directly into a shell command string without escaping special characters before passing it to libssh2_channel_exec(), enabling an attacker to craft a malicious submodule URL in a .gitmodules file that, when processed during a recursive clone, causes the remote server's shell to interpret injected commands under the victim's SSH user account. |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7 (patched in 13.6.12 (LTS) and 13.9.0 (STS)), allow a physically proximate attacker to modify or erase tamper events via the Chassis management board. |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7 (patched in 13.6.12 (LTS) and 13.9.0 (STS)), allow a user with OS root access to alter firmware on the Chassis Management Board (without Authentication). This is called F04. |
| The Chassis Management Board in Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7 (patched in 13.6.12 (LTS) and 13.9.0 (STS)), allows a physically proximate attacker to persistently modify firmware and influence the (insecurely configured) appliance boot process. To exploit this, the attacker must modify the firmware via JTAG or perform an upgrade to the chassis management board firmware. This is called F03. |
| IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to obtain sensitive information due to external control of system configuration. |
| Vulnerability in the Siebel CRM Integration product of Oracle Siebel CRM (component: REST). Supported versions that are affected are 17.0-26.6. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTPS to compromise Siebel CRM Integration. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Siebel CRM Integration accessible data as well as unauthorized access to critical data or complete access to all Siebel CRM Integration accessible data. CVSS 3.1 Base Score 7.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N). |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7 (patched in 13.6.12 (LTS) and 13.9.0 (STS)), allow a Physically Proximate Attacker to Escalate Privileges by enabling the USB interface through chassis probe insertion during system boot, aka "Unauthorized Reactivation of the USB interface" or F01. |
| EFence developed by Thinking Software Technology has an Arbitrary File Upload vulnerability. Authenticated remote attackers can upload and execute web shell backdoors, thereby enabling arbitrary code execution on the server. |
| A flaw was found in the file-xwd plugin in GIMP. When processing a specially crafted XWD image file, the plugin validates the image width and bytes-per-line parameters independently rather than ensuring their combined values are consistent with the allocated buffer size. This incorrect validation leads to improper bounds checking, causing a heap out-of-bounds read. This issue can result in an application crash, leading to a denial of service, or a limited information disclosure of heap memory contents into the produced image. |
| The Simple Newsletter Plugin WordPress plugin before 4.3.3 does not verify that the requester is the subscriber named in a public request before rendering that subscriber's stored details, allowing unauthenticated users to disclose a subscriber's personal data along with the key that authorises changes to their record. |
| The Directorist: AI-Powered Business Directory, Listings & Classified Ads WordPress plugin before 8.9.3 does not sanitize a user-supplied image reference before using it as the source of a file move, allowing users with a subscriber-level account to relocate arbitrary server-readable image files into a publicly accessible directory, and to delete them from their original location. |
| The Kirki WordPress plugin before 6.0.14 does not perform a capability check on some endpoints of one of its public AJAX actions, allowing unauthenticated users to retrieve the email addresses of registered users and comment authors, as well as non-public page content and settings. |
| The AI Engine WordPress plugin before 3.7.2 does not confine a caller-supplied URL when mapping it to a local filesystem path before reading the file and forwarding its contents to an external service, allowing users with a subscriber-level account to read arbitrary files from the server and exfiltrate them off-host. Reaching the issue at subscriber level requires a non-default public API feature to be enabled; otherwise the same issue is reachable by an administrator, which on multisite allows a non-super subsite administrator to read the network-shared configuration and its secrets. |
