| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix bc_ackers underflow on duplicate GRP_ACK_MSG
The GRP_ACK_MSG handler in tipc_group_proto_rcv() currently decrements
bc_ackers on every inbound group ACK, even when the same member has
already acknowledged the current broadcast round.
Because bc_ackers is a u16, a duplicate ACK received after the last
legitimate ACK wraps the counter to 65535. Once wrapped,
tipc_group_bc_cong() keeps reporting congestion and later group
broadcasts on the affected socket stay blocked until the group is
recreated.
Fix this by ignoring duplicate or stale ACKs before touching bc_acked or
bc_ackers. This makes repeated GRP_ACK_MSG handling idempotent and
prevents the underflow path. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: hold dev ref until after transport_finish NF_HOOK
After async crypto completes, xfrm_input_resume() calls dev_put()
immediately on re-entry before the skb reaches transport_finish.
The skb->dev pointer is then used inside NF_HOOK and its okfn,
which can race with device teardown.
Remove the dev_put from the async resumption entry and instead
drop the reference after the NF_HOOK call in transport_finish,
using a saved device pointer since NF_HOOK may consume the skb.
This covers NF_DROP, NF_QUEUE and NF_STOLEN paths that skip
the okfn.
For non-transport exits (decaps, gro, drop) and secondary
async return points, release the reference inline when
async is set. |
| In the Linux kernel, the following vulnerability has been resolved:
seg6: separate dst_cache for input and output paths in seg6 lwtunnel
The seg6 lwtunnel uses a single dst_cache per encap route, shared
between seg6_input_core() and seg6_output_core(). These two paths
can perform the post-encap SID lookup in different routing contexts
(e.g., ip rules matching on the ingress interface, or VRF table
separation). Whichever path runs first populates the cache, and the
other reuses it blindly, bypassing its own lookup.
Fix this by splitting the cache into cache_input and cache_output,
so each path maintains its own cached dst independently. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rt2x00usb: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the USB anchor lifetime so that it is released on driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
NFC: nxp-nci: allow GPIOs to sleep
Allow the firmware and enable GPIOs to sleep.
This fixes a `WARN_ON' and allows the driver to operate GPIOs which are
connected to I2C GPIO expanders.
-- >8 --
kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98
-- >8 -- |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: cp2615: fix serial string NULL-deref at probe
The cp2615 driver uses the USB device serial string as the i2c adapter
name but does not make sure that the string exists.
Verify that the device has a serial number before accessing it to avoid
triggering a NULL-pointer dereference (e.g. with malicious devices). |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-dw-dma: fix print error log when wait finish transaction
If an error occurs, the device may not have a current message. In this
case, the system will crash.
In this case, it's better to use dev from the struct ctlr (struct spi_controller*). |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (powerz) Fix use-after-free on USB disconnect
After powerz_disconnect() frees the URB and releases the mutex, a
subsequent powerz_read() call can acquire the mutex and call
powerz_read_data(), which dereferences the freed URB pointer.
Fix by:
- Setting priv->urb to NULL in powerz_disconnect() so that
powerz_read_data() can detect the disconnected state.
- Adding a !priv->urb check at the start of powerz_read_data()
to return -ENODEV on a disconnected device.
- Moving usb_set_intfdata() before hwmon registration so the
disconnect handler can always find the priv pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Use scratch field in MMIO fragment to hold small write values
When exiting to userspace to service an emulated MMIO write, copy the
to-be-written value to a scratch field in the MMIO fragment if the size
of the data payload is 8 bytes or less, i.e. can fit in a single chunk,
instead of pointing the fragment directly at the source value.
This fixes a class of use-after-free bugs that occur when the emulator
initiates a write using an on-stack, local variable as the source, the
write splits a page boundary, *and* both pages are MMIO pages. Because
KVM's ABI only allows for physically contiguous MMIO requests, accesses
that split MMIO pages are separated into two fragments, and are sent to
userspace one at a time. When KVM attempts to complete userspace MMIO in
response to KVM_RUN after the first fragment, KVM will detect the second
fragment and generate a second userspace exit, and reference the on-stack
variable.
The issue is most visible if the second KVM_RUN is performed by a separate
task, in which case the stack of the initiating task can show up as truly
freed data.
==================================================================
BUG: KASAN: use-after-free in complete_emulated_mmio+0x305/0x420
Read of size 1 at addr ffff888009c378d1 by task syz-executor417/984
CPU: 1 PID: 984 Comm: syz-executor417 Not tainted 5.10.0-182.0.0.95.h2627.eulerosv2r13.x86_64 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Call Trace:
dump_stack+0xbe/0xfd
print_address_description.constprop.0+0x19/0x170
__kasan_report.cold+0x6c/0x84
kasan_report+0x3a/0x50
check_memory_region+0xfd/0x1f0
memcpy+0x20/0x60
complete_emulated_mmio+0x305/0x420
kvm_arch_vcpu_ioctl_run+0x63f/0x6d0
kvm_vcpu_ioctl+0x413/0xb20
__se_sys_ioctl+0x111/0x160
do_syscall_64+0x30/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
RIP: 0033:0x42477d
Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007faa8e6890e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000004d7338 RCX: 000000000042477d
RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000005
RBP: 00000000004d7330 R08: 00007fff28d546df R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d733c
R13: 0000000000000000 R14: 000000000040a200 R15: 00007fff28d54720
The buggy address belongs to the page:
page:0000000029f6a428 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9c37
flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0000000 0000000000000000 ffffea0000270dc8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888009c37780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888009c37800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff888009c37880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff888009c37900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888009c37980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
The bug can also be reproduced with a targeted KVM-Unit-Test by hacking
KVM to fill a large on-stack variable in complete_emulated_mmio(), i.e. by
overwrite the data value with garbage.
Limit the use of the scratch fields to 8-byte or smaller accesses, and to
just writes, as larger accesses and reads are not affected thanks to
implementation details in the emulator, but add a sanity check to ensure
those details don't change in the future. Specifically, KVM never uses
on-stack variables for accesses larger that 8 bytes, e.g. uses an operand
in the emulator context, and *al
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Lock all vCPUs when synchronzing VMSAs for SNP launch finish
Lock all vCPUs when synchronizing and encrypting VMSAs for SNP guests, as
allowing userspace to manipulate and/or run a vCPU while its state is being
synchronized would at best corrupt vCPU state, and at worst crash the host
kernel.
Opportunistically assert that vcpu->mutex is held when synchronizing its
VMSA (the SEV-ES path already locks vCPUs). |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: pci-epf-vntb: Stop cmd_handler work in epf_ntb_epc_cleanup
Disable the delayed work before clearing BAR mappings and doorbells to
avoid running the handler after resources have been torn down.
Unable to handle kernel paging request at virtual address ffff800083f46004
[...]
Internal error: Oops: 0000000096000007 [#1] SMP
[...]
Call trace:
epf_ntb_cmd_handler+0x54/0x200 [pci_epf_vntb] (P)
process_one_work+0x154/0x3b0
worker_thread+0x2c8/0x400
kthread+0x148/0x210
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
staging: sm750fb: fix division by zero in ps_to_hz()
ps_to_hz() is called from hw_sm750_crtc_set_mode() without validating
that pixclock is non-zero. A zero pixclock passed via FBIOPUT_VSCREENINFO
causes a division by zero.
Fix by rejecting zero pixclock in lynxfb_ops_check_var(), consistent
with other framebuffer drivers. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: avoid double-free in smb_direct_free_sendmsg after smb_direct_flush_send_list()
smb_direct_flush_send_list() already calls smb_direct_free_sendmsg(),
so we should not call it again after post_sendmsg()
moved it to the batch list. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid double-free in smbd_free_send_io() after smbd_send_batch_flush()
smbd_send_batch_flush() already calls smbd_free_send_io(),
so we should not call it again after smbd_post_send()
moved it to the batch list. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete()
A broken/bored/mean USB host can overflow the skb_shared_info->frags[]
array on a Linux gadget exposing a Phonet function by sending an
unbounded sequence of full-page OUT transfers.
pn_rx_complete() finalizes the skb only when req->actual < req->length,
where req->length is set to PAGE_SIZE by the gadget. If the host always
sends exactly PAGE_SIZE bytes per transfer, fp->rx.skb will never be
reset and each completion will add another fragment via
skb_add_rx_frag(). Once nr_frags exceeds MAX_SKB_FRAGS (default 17),
subsequent frag stores overwrite memory adjacent to the shinfo on the
heap.
Drop the skb and account a length error when the frag limit is reached,
matching the fix applied in t7xx by commit f0813bcd2d9d ("net: wwan:
t7xx: fix potential skb->frags overflow in RX path"). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: tdfxfb: avoid divide-by-zero on FBIOPUT_VSCREENINFO
Much like commit 19f953e74356 ("fbdev: fb_pm2fb: Avoid potential divide
by zero error"), we also need to prevent that same crash from happening
in the udlfb driver as it uses pixclock directly when dividing, which
will crash. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: fireworks: bound device-supplied status before string array lookup
The status field in an EFW response is a 32-bit value supplied by the
firewire device. efr_status_names[] has 17 entries so a status value
outside that range goes off into the weeds when looking at the %s value.
Even worse, the status could return EFR_STATUS_INCOMPLETE which is
0x80000000, and is obviously not in that array of potential strings.
Fix this up by properly bounding the index against the array size and
printing "unknown" if it's not recognized. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: us144mkii: fix NULL deref on missing interface 0
A malicious USB device with the TASCAM US-144MKII device id can have a
configuration containing bInterfaceNumber=1 but no interface 0. USB
configuration descriptors are not required to assign interface numbers
sequentially, so usb_ifnum_to_if(dev, 0) returns will NULL, which will
then be dereferenced directly.
Fix this up by checking the return value properly. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: s3c24xx: check the size of the SMBUS message before using it
The first byte of an i2c SMBUS message is the size, and it should be
verified to ensure that it is in the range of 0..I2C_SMBUS_BLOCK_MAX
before processing it.
This is the same logic that was added in commit a6e04f05ce0b ("i2c:
tegra: check msg length in SMBUS block read") to the i2c tegra driver. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: add missing return after LLCP_CLOSED checks
In nfc_llcp_recv_hdlc() and nfc_llcp_recv_disc(), when the socket
state is LLCP_CLOSED, the code correctly calls release_sock() and
nfc_llcp_sock_put() but fails to return. Execution falls through to
the remainder of the function, which calls release_sock() and
nfc_llcp_sock_put() again. This results in a double release_sock()
and a refcount underflow via double nfc_llcp_sock_put(), leading to
a use-after-free.
Add the missing return statements after the LLCP_CLOSED branches
in both functions to prevent the fall-through. |
