| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix accesses to uninit stack slots
Privileged programs are supposed to be able to read uninitialized stack
memory (ever since 6715df8d5) but, before this patch, these accesses
were permitted inconsistently. In particular, accesses were permitted
above state->allocated_stack, but not below it. In other words, if the
stack was already "large enough", the access was permitted, but
otherwise the access was rejected instead of being allowed to "grow the
stack". This undesired rejection was happening in two places:
- in check_stack_slot_within_bounds()
- in check_stack_range_initialized()
This patch arranges for these accesses to be permitted. A bunch of tests
that were relying on the old rejection had to change; all of them were
changed to add also run unprivileged, in which case the old behavior
persists. One tests couldn't be updated - global_func16 - because it
can't run unprivileged for other reasons.
This patch also fixes the tracking of the stack size for variable-offset
reads. This second fix is bundled in the same commit as the first one
because they're inter-related. Before this patch, writes to the stack
using registers containing a variable offset (as opposed to registers
with fixed, known values) were not properly contributing to the
function's needed stack size. As a result, it was possible for a program
to verify, but then to attempt to read out-of-bounds data at runtime
because a too small stack had been allocated for it.
Each function tracks the size of the stack it needs in
bpf_subprog_info.stack_depth, which is maintained by
update_stack_depth(). For regular memory accesses, check_mem_access()
was calling update_state_depth() but it was passing in only the fixed
part of the offset register, ignoring the variable offset. This was
incorrect; the minimum possible value of that register should be used
instead.
This tracking is now fixed by centralizing the tracking of stack size in
grow_stack_state(), and by lifting the calls to grow_stack_state() to
check_stack_access_within_bounds() as suggested by Andrii. The code is
now simpler and more convincingly tracks the correct maximum stack size.
check_stack_range_initialized() can now rely on enough stack having been
allocated for the access; this helps with the fix for the first issue.
A few tests were changed to also check the stack depth computation. The
one that fails without this patch is verifier_var_off:stack_write_priv_vs_unpriv. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: core: Fix refcount error in del_mtd_device()
del_mtd_device() will call of_node_put() to mtd_get_of_node(mtd), which
is mtd->dev.of_node. However, memset(&mtd->dev, 0) is called before
of_node_put(). As the result, of_node_put() won't do anything in
del_mtd_device(), and causes the refcount leak.
del_mtd_device()
memset(&mtd->dev, 0, sizeof(mtd->dev) # clear mtd->dev
of_node_put()
mtd_get_of_node(mtd) # mtd->dev is cleared, can't locate of_node
# of_node_put(NULL) won't do anything
Fix the error by caching the pointer of the device_node.
OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry: attach
overlay node /spi/spi-sram@0
CPU: 3 PID: 275 Comm: python3 Tainted: G N 6.1.0-rc3+ #54
0d8a1edddf51f172ff5226989a7565c6313b08e2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x67/0x83
kobject_get+0x155/0x160
of_node_get+0x1f/0x30
of_fwnode_get+0x43/0x70
fwnode_handle_get+0x54/0x80
fwnode_get_nth_parent+0xc9/0xe0
fwnode_full_name_string+0x3f/0xa0
device_node_string+0x30f/0x750
pointer+0x598/0x7a0
vsnprintf+0x62d/0x9b0
...
cfs_overlay_release+0x30/0x90
config_item_release+0xbe/0x1a0
config_item_put+0x5e/0x80
configfs_rmdir+0x3bd/0x540
vfs_rmdir+0x18c/0x320
do_rmdir+0x198/0x330
__x64_sys_rmdir+0x2c/0x40
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[<miquel.raynal@bootlin.com>: Light reword of the commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Do mark_chain_precision for ARG_CONST_ALLOC_SIZE_OR_ZERO
Precision markers need to be propagated whenever we have an ARG_CONST_*
style argument, as the verifier cannot consider imprecise scalars to be
equivalent for the purposes of states_equal check when such arguments
refine the return value (in this case, set mem_size for PTR_TO_MEM). The
resultant mem_size for the R0 is derived from the constant value, and if
the verifier incorrectly prunes states considering them equivalent where
such arguments exist (by seeing that both registers have reg->precise as
false in regsafe), we can end up with invalid programs passing the
verifier which can do access beyond what should have been the correct
mem_size in that explored state.
To show a concrete example of the problem:
0000000000000000 <prog>:
0: r2 = *(u32 *)(r1 + 80)
1: r1 = *(u32 *)(r1 + 76)
2: r3 = r1
3: r3 += 4
4: if r3 > r2 goto +18 <LBB5_5>
5: w2 = 0
6: *(u32 *)(r1 + 0) = r2
7: r1 = *(u32 *)(r1 + 0)
8: r2 = 1
9: if w1 == 0 goto +1 <LBB5_3>
10: r2 = -1
0000000000000058 <LBB5_3>:
11: r1 = 0 ll
13: r3 = 0
14: call bpf_ringbuf_reserve
15: if r0 == 0 goto +7 <LBB5_5>
16: r1 = r0
17: r1 += 16777215
18: w2 = 0
19: *(u8 *)(r1 + 0) = r2
20: r1 = r0
21: r2 = 0
22: call bpf_ringbuf_submit
00000000000000b8 <LBB5_5>:
23: w0 = 0
24: exit
For the first case, the single line execution's exploration will prune
the search at insn 14 for the branch insn 9's second leg as it will be
verified first using r2 = -1 (UINT_MAX), while as w1 at insn 9 will
always be 0 so at runtime we don't get error for being greater than
UINT_MAX/4 from bpf_ringbuf_reserve. The verifier during regsafe just
sees reg->precise as false for both r2 registers in both states, hence
considers them equal for purposes of states_equal.
If we propagated precise markers using the backtracking support, we
would use the precise marking to then ensure that old r2 (UINT_MAX) was
within the new r2 (1) and this would never be true, so the verification
would rightfully fail.
The end result is that the out of bounds access at instruction 19 would
be permitted without this fix.
Note that reg->precise is always set to true when user does not have
CAP_BPF (or when subprog count is greater than 1 (i.e. use of any static
or global functions)), hence this is only a problem when precision marks
need to be explicitly propagated (i.e. privileged users with CAP_BPF).
A simplified test case has been included in the next patch to prevent
future regressions. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: avoid skb access on nf_stolen
When verdict is NF_STOLEN, the skb might have been freed.
When tracing is enabled, this can result in a use-after-free:
1. access to skb->nf_trace
2. access to skb->mark
3. computation of trace id
4. dump of packet payload
To avoid 1, keep a cached copy of skb->nf_trace in the
trace state struct.
Refresh this copy whenever verdict is != STOLEN.
Avoid 2 by skipping skb->mark access if verdict is STOLEN.
3 is avoided by precomputing the trace id.
Only dump the packet when verdict is not "STOLEN". |
| In the Linux kernel, the following vulnerability has been resolved:
staging: vchiq_arm: Avoid NULL ptr deref in vchiq_dump_platform_instances
vchiq_get_state() can return a NULL pointer. So handle this cases and
avoid a NULL pointer derefence in vchiq_dump_platform_instances. |
| When libcurl uses libssh2 with a hashed `known_hosts` file, an unrelated
initial entry can cause host key validation to report a key *mismatch* as a
*missing* key to the `CURLOPT_SSH_KEYFUNCTION` callback. |
| Enabling `CURLOPT_CRLF` causes curl to advertise the raw input byte count in
the `IMAP APPEND {N}` literal while transmitting line-ending expanded data.
The server reads only $N$ bytes for the payload, causing the remaining
overflow bytes to be interpreted and executed as pipelined IMAP commands
within the authenticated session. |
| An authenticated HTTPS origin can supply an HSTS `max-age` value that the
parser accepts, but time serialization later fails to process. On 64-bit
systems, extreme max-age values compute an absolute expiry within standard
time integer limits that exceeds calendar time structure bounds. During cache
saves, the original HSTS file is truncated before writing a temporary
replacement; when serialization fails, the temporary file is deleted, leaving
an empty or partial cache. Because the save error is silently ignored during
cleanup, curl exits successfully despite the data loss. |
| Importing a `includeSubDomains` parent HSTS entry before a longer-lived child
entry, silently drops the child. Consequently, when the parent expires, the
child's valid HSTS policy is lost, causing curl to issue unencrypted HTTP
requests rather than upgrading to HTTPS. |
| When using ambient user credentials, an HTTP request directed to one origin
may be dispatched over a connection previously authenticated via Negotiate for
a different origin, leaving the request's intended credentials unused. |
| libcurl's connection cache match function never considers the automatic client
certificate option, so a cached, already authenticated Schannel connection can
be handed to a transfer that got redirected to a different origin, even though
the code explicitly switched off the auto client cert option for that transfer
to prevent exactly this. |
| An HTTP proxy can trick libcurl into sending the origin's credentials (Basic
password, or a Negotiate/Kerberos ticket) to the proxy itself, by answering
the `CONNECT` tunnel request with 401 `WWW-Authenticate:` instead of the
expected 407 `Proxy-Authenticate:`. |
| When using an *ambient user* in a first transfer doing Negotiate
authentication and asked to follow redirects, curl could pass on its
credential details to an unrelated second origin when asked to redirect there. |
| The system certificate authority (CA) store in Red Hat products, distributed via ca-certificates RPM packages, included multiple root CA certificates of authorities, which signed intermediate CA certificates with weak private keys issued by the eMudhra certificate authority. A man-in-the-middle attacker could use this flaw to issue certificates for arbitrary host names signed by the weak intermediate CA certificates, which would be considered trusted by a TLS/SSL client using system CA store and cause such clients to connect to malicious sites.
Due to inability to only distrust specific intermediate certificates in all clients using the system CA store, root CA certificates of authorities that signed weak intermediate CA certificates are being removed. |
| FOSSBilling before 0.8.9 contains a Cross-Site Request Forgery vulnerability in the staff guest login endpoint (POST /api/guest/staff/login) that allows remote attackers to force authentication because checkGuestClientAuthentication() only allowlists client_login and client_create, leaving staff_login without CSRF or Origin validation. Attackers can host an auto-submitting HTML form with attacker-controlled credentials to silently log a victim's browser into the attacker's staff account. |
| A NULL pointer dereference vulnerability in the Qt QCborValue to JSON conversion of the Qt Core module. |
| Dell OpenManage Enterprise, versions prior to 4.8.0, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution. |
| Płatnik performs client-side authentication. An attacker with access to any application instance connected to the backend server can bypass the login verification process and authenticate as an arbitrary user.
This issue was fixed in metric 242 in version 10.02.002. |
| Use of a weak password encoding algorithm in Płatnik software allows a user who obtains encoded password to easily decode it.
This issue was fixed in metric 242 in version 10.02.002. |
| Płatnik uses HTTP protocol to download updates, libraries and support files. It allows an attacker to conduct a Man-In-The-Middle attack, obtain transmitted data and replace the original files with their own.
This issue was fixed in metric 242 in version 10.02.002. |
