| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime with its Winch (baseline) non-default compiler backend may allow properly constructed guest Wasm to access host memory outside of its linear-memory sandbox. This vulnerability requires use of the Winch compiler (-Ccompiler=winch). By default, Wasmtime uses its Cranelift backend, not Winch. With Winch, the same incorrect assumption is present in theory on both aarch64 and x86-64. The aarch64 case has an observed-working proof of concept, while the x86-64 case is theoretical and may not be reachable in practice. This Winch compiler bug can allow the Wasm guest to access memory before or after the linear-memory region, independently of whether pre- or post-guard regions are configured. The accessible range in the initial bug proof-of-concept is up to 32KiB before the start of memory, or ~4GiB after the start of memory, independently of the size of pre- or post-guard regions or the use of explicit or guard-region-based bounds checking. However, the underlying bug assumes a 32-bit memory offset stored in a 64-bit register has its upper bits cleared when it may not, and so closely related variants of the initial proof-of-concept may be able to access truly arbitrary memory in-process. This could result in a host process segmentation fault (DoS), an arbitrary data leak from the host process, or with a write, potentially an arbitrary RCE. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Winch compiler backend contains a bug where translating the table.grow operator causes the result to be incorrectly typed. For 32-bit tables this means that the result of the operator, internally in Winch, is tagged as a 64-bit value instead of a 32-bit value. This invalid internal representation of Winch's compiler state compounds into further issues depending on how the value is consumed. The primary consequence of this bug is that bytes in the host's address space can be stored/read from. This is only applicable to the 16 bytes before linear memory, however, as the only significant return value of table.grow that can be misinterpreted is -1. The bytes before linear memory are, by default, unmapped memory. Wasmtime will detect this fault and abort the process, however, because wasm should not be able to access these bytes. Overall this this bug in Winch represents a DoS vector by crashing the host process, a correctness issue within Winch, and a possible leak of up to 16-bytes before linear memory. Wasmtime's default compiler is Cranelift, not Winch, and Wasmtime's default settings are to place guard pages before linear memory. This means that Wasmtime's default configuration is not affected by this issue, and when explicitly choosing Winch Wasmtime's otherwise default configuration leads to a DoS. Disabling guard pages before linear memory is required to possibly leak up to 16-bytes of host data. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of transcoding strings between components contains a bug where the return value of a guest component's realloc is not validated before the host attempts to write through the pointer. This enables a guest to cause the host to write arbitrary transcoded string bytes to an arbitrary location up to 4GiB away from the base of linear memory. These writes on the host could hit unmapped memory or could corrupt host data structures depending on Wasmtime's configuration. Wasmtime by default reserves 4GiB of virtual memory for a guest's linear memory meaning that this bug will by default on hosts cause the host to hit unmapped memory and abort the process due to an unhandled fault. Wasmtime can be configured, however, to reserve less memory for a guest and to remove all guard pages, so some configurations of Wasmtime may lead to corruption of data outside of a guest's linear memory, such as host data structures or other guests's linear memories. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. |
| Soft Serve is a self-hostable Git server for the command line. Prior to 0.7.5, it is possible for a user who can commit files to a repository hosted by Soft Serve to execute arbitrary code via environment manipulation and Git. The issue is that Soft Serve passes all environment variables given by the client to git subprocesses. This includes environment variables that control program execution, such as LD_PRELOAD. This vulnerability is fixed in 0.7.5. |
| Vacron Camera ping Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Vacron Camera devices. Authentication is required to exploit this vulnerability.
The specific flaw exists within the webs.cgi endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-25892. |
| A command injection vulnerability has been identified in bwdpi. A remote, authenticated attacker could leverage this vulnerability to potentially execute arbitrary commands, leading to the device executing unintended instructions.
Refer to the 'Security Update for ASUS Router Firmware' section on the ASUS Security Advisory for more information. |
| A vulnerability was found in D-Link DI-8100G, DI-8200G and DI-8003G 17.12.20A1/19.12.10A1. Affected by this issue is the function sub_433F7C of the file version_upgrade.asp of the component jhttpd. The manipulation of the argument path results in os command injection. The attack may be launched remotely. The exploit has been made public and could be used. |
| An OS command injection vulnerability exists in the OptiLink ONT1GEW GPON router firmware version V2.1.11_X101 Build 1127.190306 and earlier. The router’s web management interface fails to properly sanitize user input in the target_addr parameter of the formTracert and formPing administrative endpoints. An authenticated attacker can inject arbitrary operating system commands, which are executed with root privileges, leading to remote code execution. Successful exploitation enables full compromise of the device. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-04 UTC. |
| Velocidex WinPmem versions below 4.1 suffer from an Out of Bounds Write vulnerability. By using an IO Control, a user space program can trick the driver into writing a 0 into any chosen memory location. In conjunction with information leakage from the WinPmem driver, attackers can discover the location in memory for the g_CiOptions global symbol. This can be leveraged to disable signed driver enforcement on the target system - allowing attackers to load unsigned drivers. |
| MicroDicom
DICOM Viewer suffers from an out-of-bounds write vulnerability. Remote attackers are able to exploit this issue to potentially execute arbitrary code on affected installations of DICOM Viewer. User interaction is required to exploit the vulnerability in that the user must either visit a malicious website or open a malicious DICOM file locally. |
| An OS command injection vulnerability exists in Russound MBX-PRE-D67F firmware version 3.1.6, allowing unauthenticated attackers to execute arbitrary commands as root via crafted input to the hostname parameter in network configuration requests. This vulnerability stems from improper neutralization of special elements used in an OS command within the network configuration handler, enabling remote code execution with the highest privileges. |
| The PPPoE configuration interface of the Shenzhen Aitemi M300 Wi-Fi Repeater (hardware model MT02) is vulnerable to command injection via the 'user' parameter. Input is processed unsafely during network setup, allowing attackers to execute arbitrary system commands with root privileges. |
| A command injection vulnerability affects the Shenzhen Aitemi M300 Wi-Fi Repeater (hardware model MT02) during WPA2 configuration. The 'key' parameter is interpreted directly by the system shell, enabling attackers to execute arbitrary commands as root. Exploitation requires no authentication and can be triggered during wireless setup. |
| Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in TUBITAK BILGEM Pardus OS My Computer allows OS Command Injection.This issue affects Pardus OS My Computer: before 0.7.2. |
| WRH-733GBK and WRH-733GWH contain an improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability in the telnet function. If a remote unauthenticated attacker sends a specially crafted request to the affected product, an arbitrary OS command may be executed. |
| A vulnerability, which was classified as critical, was found in Wifi-soft UniBox Controller up to 20250506. This affects an unknown part of the file /billing/pms_check.php. The manipulation of the argument ipaddress leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| An OS command injection vulnerability within the update functionality may allow an authenticated administrator to execute unauthorized arbitrary OS commands.
Users with administrative privileges may upload update packages to upgrade the versions of Nozomi Networks Guardian and CMC.
While these updates are signed and their signatures are validated prior to installation, an improper signature validation check has been identified.
This issue could potentially enable users to execute commands remotely on the appliance, thereby impacting confidentiality, integrity, and availability. |
| CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability exists that could cause the execution of any shell command when executing a netstat command using BLMon Console in an SSH session. |
| CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability exists that could cause command injection in BLMon that is executed in the operating system console when in a SSH session. |
| Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Newtec/iDirect NTC2218, NTC2250, NTC2299 on Linux, PowerPC, ARM allows Local Code Inclusion.This issue affects NTC2218, NTC2250, NTC2299: from 1.0.1.1 through 2.2.6.19.
The `commit_multicast` page used to configure multicasts in the modem's web administration interface uses improperly parses incoming data from the request before passing it to an `eval` statement in a bash script. This allows attackers to inject arbitrary shell commands. |
