| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| dotCMS versions 24.03.22 and after, identified a Boolean-based blind SQLi vulnerability in the /api/v1/contenttype endpoint. This endpoint uses the sites query parameter, which accepts a comma-separated list of site identifiers or keys.
The vulnerability was triggered via the sites parameter, which was directly concatenated into a SQL query without proper sanitization.
Exploitation allowed an authenticated attacker with low privileges to extract data from database, perform privilege escalation, or trigger denial-of-service conditions.
The vulnerability was verified using tools such as SQLMap and confirmed to allow full database exfiltration and potential denial-of-service conditions via crafted payloads.
The vulnerability is fixed in the following versions of dotCMS stack: 25.08.14 / 25.07.10-1v2 LTS / 24.12.27v10 LTS / 24.04.24v21 LTS |
| A flaw in the binding process of Govee’s cloud platform and devices allows a remote attacker to bind an existing, online Govee device to the attacker’s account, resulting in full control of the device and removal of the device from its legitimate owner’s account.
The server‑side API allows device association using a set of identifiers: "device", "sku", "type", and a client‑computed "value", that are not cryptographically bound to a secret originating from the device itself.
The vulnerability has been verified for the Govee H6056 - lamp device in firmware version 1.08.13, but may affect also other Govee cloud‑connected devices. The vendor is investigating other potentially affected models.
The vendor has deployed server-side security enhancements and automatic firmware updates for model H6056. Most of H6056 devices have been successfully patched through automatic updates. Remaining H6056 users with upgradeable hardware versions must manually update firmware through the Govee Home app while keeping their device WiFi-connected. Users should open the Govee Home app, tap their H6056 device card to enter the device details page, tap the settings icon in the upper right corner, navigate to Device Information section (Firmware Version), and tap the Update button to install the security patch immediately.
Govee H6056 devices with hardware versions 1.00.10 or 1.00.11 cannot receive firmware update due to hardware limitations. |
| Kieback & Peter's DDC4000 series is vulnerable to a path traversal vulnerability, which may allow an unauthenticated attacker to read files on the system. |
| A binding to an unrestricted IP address vulnerability was discovered in Productivity Suite software version v4.4.1.19. The vulnerability allows an unauthenticated remote attacker to interact with the ProductivityService PLC simulator and read, write, or delete arbitrary files and folders on the target machine |
| FLIR Thermal Camera PT-Series firmware version 8.0.0.64 contains multiple unauthenticated remote command injection vulnerabilities in the controllerFlirSystem.php script. Attackers can execute arbitrary system commands as root by exploiting unsanitized POST parameters in the execFlirSystem() function through shell_exec() calls. Exploitation evidence was observed by the Shadowserver Foundation on 2026-01-06 (UTC). |
| Unauthenticated access to the "/cgi-bin/CliniNET.prd/GetActiveSessions.pl" endpoint allows takeover of any user session logged into the system, including users with admin privileges. |
| The vulnerability allows unauthenticated users to download a file containing session ID data by directly accessing the "/cgi-bin/CliniNET.prd/utils/userlogxls.pl" endpoint. |
| The configuration file containing database logins and passwords is readable by any local user. |
| INIM Electronics Smartliving SmartLAN/G/SI <=6.x contains hard-coded credentials in its Linux distribution image that cannot be changed through normal device operations. Attackers can exploit these persistent credentials to log in and gain unauthorized system access across multiple SmartLiving device models. |
| An unrestricted upload of file with dangerous type vulnerability in the upload file function of Galaxy Software Services Corporation Vitals ESP Forum Module through 1.3 version allows remote authenticated users to execute arbitrary system commands via a malicious file. |
| Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in I-O DATA network attached hard disk 'HDL-T Series' firmware Ver.1.21 and earlier when 'Remote Link3 function' is enabled. If exploited, a remote unauthenticated attacker may execute an arbitrary OS command. |
| A critical security vulnerability exists in remote cache extensions for common build systems utilizing bucket-based remote cache (such as those using Amazon S3, Google Cloud Storage, or similar object storage) that allows any contributor with pull request privileges to inject compromised artifacts from an untrusted environment into trusted production environments without detection.
The vulnerability exploits a fundamental design flaw in the "first-to-cache wins" principle, where artifacts built in untrusted environments (feature branches, pull requests) can poison the cache used by trusted environments (protected branches, production deployments).
This attack bypasses all traditional security measures including encryption, access controls, and checksum validation because the poisoning occurs during the artifact construction phase, before any security measures are applied. |
| An unauthenticated command injection vulnerability exists in AVTECH DVR devices via Search.cgi?action=cgi_query. The use of wget without input sanitization allows attackers to inject shell commands through the username or queryb64str parameters, executing commands as root. Exploitation evidence was observed by the Shadowserver Foundation on 2025-01-04 UTC. |
| AnyShare contains a critical unauthenticated remote code execution vulnerability in the ServiceAgent API exposed on port 10250. The endpoint /api/ServiceAgent/start_service accepts user-supplied input via POST and fails to sanitize command-like payloads. An attacker can inject shell syntax that is interpreted by the backend, enabling arbitrary command execution. The vulnerability is presumed to affect builds released prior to August 2025 and is said to be remediated in newer versions of the product, though the exact affected range remains undefined. Exploitation evidence was first observed by the Shadowserver Foundation on 2025-07-11 UTC. |
| A remote code execution vulnerability exists in CryptoLog (PHP version, discontinued since 2009) due to a chained exploitation of SQL injection and command injection vulnerabilities. An unauthenticated attacker can gain shell access as the web server user by first exploiting a SQL injection flaw in login.php to bypass authentication, followed by command injection in logshares_ajax.php to execute arbitrary operating system commands.
The login bypass is achieved by submitting crafted SQL via the user POST parameter. Once authenticated, the attacker can abuse the lsid POST parameter in the logshares_ajax.php endpoint to inject and execute a command using $(...) syntax, resulting in code execution under the web context.
This exploitation path does not exist in the ASP.NET version of CryptoLog released since 2009. |
| Missing Authentication for Critical Function vulnerability in ABB ALS-mini-s4 IP, ABB ALS-mini-s8 IP.This issue affects .
All firmware versions with the Serial Number from 2000 to 5166 |
| Legacy Vivotek Device firmware uses default credetials for the root and user login accounts. |
| New Site Server developed by CyberTutor has a Use of Client-Side Authentication vulnerability, allowing unauthenticated remote attackers to modify the frontend code to gain administrator privileges on the website. |
| A vulnerability has been identified in SIMATIC RTLS Locating Manager (6GT2780-0DA00) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA30) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA30) (All versions < V3.0.1.1). The affected systems use symmetric cryptography with a hard-coded key to protect the communication between client and server. This could allow an unauthenticated remote attacker to compromise confidentiality and integrity of the communication and, subsequently, availability of the system.
A successful exploit requires the attacker to gain knowledge of the hard-coded key and to be able to intercept the communication between client and server on the network. |
| A vulnerability has been identified in SIMATIC RTLS Locating Manager (6GT2780-0DA00) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA30) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA30) (All versions < V3.0.1.1). Affected systems transmit client-side resources without proper cryptographic protection. This could allow an attacker to eavesdrop on and modify resources in transit. A successful exploit requires an attacker to be in the network path between the RTLS Locating Manager server and a client (MitM). |
