| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: libwx: fix VF illegal register access
Register WX_CFG_PORT_ST is a PF restricted register. When a VF is
initialized, attempting to read this register triggers an illegal
register access, which lead to a system hang.
When the device is VF, the bus function ID can be obtained directly from
the PCI_FUNC(pdev->devfn). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-schemes: protect memcg_path kfree() with damon_sysfs_lock
Patch series "mm/damon/sysfs-schemes: fix use-after-free for [memcg_]path".
Reads of 'memcg_path' and 'path' files in DAMON sysfs interface could race
with their writes, results in use-after-free. Fix those.
This patch (of 2):
damon_sysfs_scheme_filter->mmecg_path can be read and written by users,
via DAMON sysfs memcg_path file. It can also be indirectly read, for the
parameters {on,off}line committing to DAMON. The reads for parameters
committing are protected by damon_sysfs_lock to avoid the sysfs files
being destroyed while any of the parameters are being read. But the
user-driven direct reads and writes are not protected by any lock, while
the write is deallocating the memcg_path-pointing buffer. As a result,
the readers could read the already freed buffer (user-after-free). Note
that the user-reads don't race when the same open file is used by the
writer, due to kernfs's open file locking. Nonetheless, doing the reads
and writes with separate open files would be common. Fix it by protecting
both the user-direct reads and writes with damon_sysfs_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: validate WMT event SKB length before struct access
btmtk_usb_hci_wmt_sync() casts the WMT event response SKB data to
struct btmtk_hci_wmt_evt (7 bytes) and struct btmtk_hci_wmt_evt_funcc
(9 bytes) without first checking that the SKB contains enough data.
A short firmware response causes out-of-bounds reads from SKB tailroom.
Use skb_pull_data() to validate and advance past the base WMT event
header. For the FUNC_CTRL case, pull the additional status field bytes
before accessing them. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: b43: enforce bounds check on firmware key index in b43_rx()
The firmware-controlled key index in b43_rx() can exceed the dev->key[]
array size (58 entries). The existing B43_WARN_ON is non-enforcing in
production builds, allowing an out-of-bounds read.
Make the B43_WARN_ON check enforcing by dropping the frame when the
firmware returns an invalid key index. |
| Mistune is a Python Markdown parser with renderers and plugins. In 3.2.0 and realier, in src/mistune/directives/image.py, the render_figure() function concatenates figclass and figwidth options directly into HTML attributes without escaping. This allows attribute injection and XSS even when HTMLRenderer(escape=True) is used, because these values bypass the inline renderer. |
| Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.2.1, HTMLRenderer.heading() builds the opening <hN> tag by string-concatenating the id attribute value directly into the HTML — with no call to escape(), safe_entity(), or any other sanitisation function. A double-quote character " in the id value terminates the attribute, allowing an attacker to inject arbitrary additional attributes (event handlers, src=, href=, etc.) into the heading element. This vulnerability is fixed in 3.2.1. |
| Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.2.1, render_toc_ul() builds a <ul> table-of-contents tree from a list of (level, id, text) tuples. Both the id value (used as href="#<id>") and the text value (used as the visible link label) are inserted into <a> tags via a plain Python format string — with no HTML escaping applied to either value. When heading IDs are derived from user-supplied heading text (the standard use-case for readable slug anchors), an attacker can craft a heading whose text breaks out of the href="#..." attribute context, injecting arbitrary HTML tags including <script> blocks directly into the rendered TOC. This vulnerability is fixed in 3.2.1. |
| A weakness has been identified in UTT HiPER 1200GW up to 2.5.3-170306. Affected is an unknown function of the file /goform/formPptpClientConfig of the component Web Management Interface. This manipulation of the argument PPTP server address/username/password/tunnel name causes stack-based buffer overflow. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. |
| Apache Shiro’s Jakarta EE module used the HTTP Referer header in certain cases to issue redirect after a user login.
In affected versions, insufficient validation of this client-controlled value could allow an attacker to influence the redirect target in applications using the Jakarta EE module.
This issue affects Apache Shiro from 2.0-alpha to 2.2.0, and 3.0.0-alpha-1, only when using shiro-jakarta-ee integration module. |
| Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.2.1, the Image directive plugin validates the :width: and :height: options with a regex compiled as _num_re = re.compile(r"^\d+(?:\.\d*)?"). When the validated value is not a plain integer, render_block_image() inserts it directly into a style="width:...;" or style="height:...;" attribute. Because the value was accepted by the prefix-only regex, any CSS after the leading digits reaches the style= attribute verbatim and without escaping. This vulnerability is fixed in 3.2.1. |
| A vulnerability was identified in JeecgBoot up to 3.9.1. The impacted element is an unknown function of the file /sys/comment/add. Such manipulation leads to improper access controls. The attack can be executed remotely. The exploit is publicly available and might be used. Upgrading to version 3.9.2 is sufficient to resolve this issue. Upgrading the affected component is recommended. |
| Tanium addressed an unauthorized code execution vulnerability in Connect. |
| A improper access control vulnerability in Fortinet FortiAuthenticator 8.0.2, FortiAuthenticator 8.0.0, FortiAuthenticator 6.6.0 through 6.6.8, FortiAuthenticator 6.5.0 through 6.5.6 may allow attacker to execute unauthorized code or commands via crafted requests. |
| The Eupago Gateway For Woocommerce WordPress plugin before 4.7.2 does not properly restrict access to its refund request handler, allowing unauthenticated attackers to initiate refunds against any WooCommerce order using the merchant's payment gateway credentials, and for applicable payment methods, to redirect refunded funds to an attacker-controlled bank account. |
| Vim is an open source, command line text editor. Prior to version 9.2.0073, an OS command injection vulnerability exists in the `netrw` standard plugin bundled with Vim. By inducing a user to open a crafted URL (e.g., using the `scp://` protocol handler), an attacker can execute arbitrary shell commands with the privileges of the Vim process. Version 9.2.0073 fixes the issue. |
| Vim is an open source, command line text editor. Versions prior to 9.2.0077 have a heap-buffer-overflow and a segmentation fault (SEGV) exist in Vim's swap file recovery logic. Both are caused by unvalidated fields read from crafted pointer blocks within a swap file. Version 9.2.0077 fixes the issue. |
| A stack-based buffer overflow condition exists in WOSDefaultHttpModule.dll when processing a long URL path starting with /woshome |
| IBM Langflow OSS 1.0.0 through 1.9.1 could allow remote code execution due to improper validation of symbolic links during archive extraction. |
| RELATE is a web-based courseware package. Versions prior to commit 555f0efb1c5bd7531c07cd73724d7e566a81f620 have a stored cross-site scripting vulnerability that allows any enrolled student to execute arbitrary JavaScript in an administrator's browser session, potentially leading to full admin account takeover. The `get_user()` method in `ParticipationAdmin` renders user-controlled input using `mark_safe` combined with Python's % string formatting. This bypasses Django\'s automatic HTML escaping entirely. The value returned by `get_full_name` is derived directly from the `first_name` and `last_name` fields of the User model. These fields are freely editable by any authenticated user through the profile page (`/profile/`) with no sanitization applied. When an admin views the Participation list in the Django admin panel, the unsanitized value is rendered directly into the HTML response, causing the injected script to execute in the admin's browser. Commit 555f0efb1c5bd7531c07cd73724d7e566a81f620 fixes the issue. |
| Tanium addressed an unauthorized code execution vulnerability in Connect. |
