| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmscan: fix a bug calling wakeup_kswapd() with a wrong zone index
With numa balancing on, when a numa system is running where a numa node
doesn't have its local memory so it has no managed zones, the following
oops has been observed. It's because wakeup_kswapd() is called with a
wrong zone index, -1. Fixed it by checking the index before calling
wakeup_kswapd().
> BUG: unable to handle page fault for address: 00000000000033f3
> #PF: supervisor read access in kernel mode
> #PF: error_code(0x0000) - not-present page
> PGD 0 P4D 0
> Oops: 0000 [#1] PREEMPT SMP NOPTI
> CPU: 2 PID: 895 Comm: masim Not tainted 6.6.0-dirty #255
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
> rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
> RIP: 0010:wakeup_kswapd (./linux/mm/vmscan.c:7812)
> Code: (omitted)
> RSP: 0000:ffffc90004257d58 EFLAGS: 00010286
> RAX: ffffffffffffffff RBX: ffff88883fff0480 RCX: 0000000000000003
> RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88883fff0480
> RBP: ffffffffffffffff R08: ff0003ffffffffff R09: ffffffffffffffff
> R10: ffff888106c95540 R11: 0000000055555554 R12: 0000000000000003
> R13: 0000000000000000 R14: 0000000000000000 R15: ffff88883fff0940
> FS: 00007fc4b8124740(0000) GS:ffff888827c00000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 00000000000033f3 CR3: 000000026cc08004 CR4: 0000000000770ee0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> PKRU: 55555554
> Call Trace:
> <TASK>
> ? __die
> ? page_fault_oops
> ? __pte_offset_map_lock
> ? exc_page_fault
> ? asm_exc_page_fault
> ? wakeup_kswapd
> migrate_misplaced_page
> __handle_mm_fault
> handle_mm_fault
> do_user_addr_fault
> exc_page_fault
> asm_exc_page_fault
> RIP: 0033:0x55b897ba0808
> Code: (omitted)
> RSP: 002b:00007ffeefa821a0 EFLAGS: 00010287
> RAX: 000055b89983acd0 RBX: 00007ffeefa823f8 RCX: 000055b89983acd0
> RDX: 00007fc2f8122010 RSI: 0000000000020000 RDI: 000055b89983acd0
> RBP: 00007ffeefa821a0 R08: 0000000000000037 R09: 0000000000000075
> R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
> R13: 00007ffeefa82410 R14: 000055b897ba5dd8 R15: 00007fc4b8340000
> </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fixed integer types and null check locations
[why]:
issues fixed:
- comparison with wider integer type in loop condition which can cause
infinite loops
- pointer dereference before null check |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/sme: Always exit sme_alloc() early with existing storage
When sme_alloc() is called with existing storage and we are not flushing we
will always allocate new storage, both leaking the existing storage and
corrupting the state. Fix this by separating the checks for flushing and
for existing storage as we do for SVE.
Callers that reallocate (eg, due to changing the vector length) should
call sme_free() themselves. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Fix coverity issue with unintentional integer overflow
1. Instead of multiplying 2 variable of different types. Change to
assign a value of one variable and then multiply the other variable.
2. Add a int variable for multiplier calculation instead of calculating
different types multiplier with dma_addr_t variable directly. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: staging: rtl8723bs: Fix deadlock in rtw_surveydone_event_callback()
There is a deadlock in rtw_surveydone_event_callback(),
which is shown below:
(Thread 1) | (Thread 2)
| _set_timer()
rtw_surveydone_event_callback()| mod_timer()
spin_lock_bh() //(1) | (wait a time)
... | rtw_scan_timeout_handler()
del_timer_sync() | spin_lock_bh() //(2)
(wait timer to stop) | ...
We hold pmlmepriv->lock in position (1) of thread 1 and use
del_timer_sync() to wait timer to stop, but timer handler
also need pmlmepriv->lock in position (2) of thread 2.
As a result, rtw_surveydone_event_callback() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_bh(), which could let timer handler to obtain
the needed lock. What`s more, we change spin_lock_bh() in
rtw_scan_timeout_handler() to spin_lock_irq(). Otherwise,
spin_lock_bh() will also cause deadlock() in timer handler. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: fix memory leak during D3hot to D0 transition
If 'vfio_pci_core_device::needs_pm_restore' is set (PCI device does
not have No_Soft_Reset bit set in its PMCSR config register), then
the current PCI state will be saved locally in
'vfio_pci_core_device::pm_save' during D0->D3hot transition and same
will be restored back during D3hot->D0 transition.
For saving the PCI state locally, pci_store_saved_state() is being
used and the pci_load_and_free_saved_state() will free the allocated
memory.
But for reset related IOCTLs, vfio driver calls PCI reset-related
API's which will internally change the PCI power state back to D0. So,
when the guest resumes, then it will get the current state as D0 and it
will skip the call to vfio_pci_set_power_state() for changing the
power state to D0 explicitly. In this case, the memory pointed by
'pm_save' will never be freed. In a malicious sequence, the state changing
to D3hot followed by VFIO_DEVICE_RESET/VFIO_DEVICE_PCI_HOT_RESET can be
run in a loop and it can cause an OOM situation.
This patch frees the earlier allocated memory first before overwriting
'pm_save' to prevent the mentioned memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
kernel/resource: fix kfree() of bootmem memory again
Since commit ebff7d8f270d ("mem hotunplug: fix kfree() of bootmem
memory"), we could get a resource allocated during boot via
alloc_resource(). And it's required to release the resource using
free_resource(). Howerver, many people use kfree directly which will
result in kernel BUG. In order to fix this without fixing every call
site, just leak a couple of bytes in such corner case. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: dev: check return value when calling dev_set_name()
If dev_set_name() fails, the dev_name() is null, check the return
value of dev_set_name() to avoid the null-ptr-deref. |
| A vulnerability was found in Linux Kernel. It has been classified as problematic. This affects the function find_prog_by_sec_insn of the file tools/lib/bpf/libbpf.c of the component BPF. The manipulation leads to null pointer dereference. It is recommended to apply a patch to fix this issue. The identifier VDB-211749 was assigned to this vulnerability. |
| NVIDIA CUDA Toolkit for all platforms contains a vulnerability in the nvdisasm binary where a user may cause an out-of-bounds read by passing a malformed ELF file to nvdisasm. A successful exploit of this vulnerability may lead to a partial denial of service. |
| NVIDIA CUDA Toolkit for all platforms contains a vulnerability in nvdisasm where a user may cause an out-of-bounds write by running nvdisasm on a malicious ELF file. A successful exploit of this vulnerability may lead to denial of service. |
| NVIDIA CUDA Toolkit for all platforms contains a vulnerability in the nvdisasm binary where a user may cause an out-of-bounds read by passing a malformed ELF file to nvdisasm. A successful exploit of this vulnerability may lead to a partial denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
vmxnet3: unregister xdp rxq info in the reset path
vmxnet3 does not unregister xdp rxq info in the
vmxnet3_reset_work() code path as vmxnet3_rq_destroy()
is not invoked in this code path. So, we get below message with a
backtrace.
Missing unregister, handled but fix driver
WARNING: CPU:48 PID: 500 at net/core/xdp.c:182
__xdp_rxq_info_reg+0x93/0xf0
This patch fixes the problem by moving the unregister
code of XDP from vmxnet3_rq_destroy() to vmxnet3_rq_cleanup(). |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid journaling sb update on error if journal is destroying
Presently we always BUG_ON if trying to start a transaction on a journal marked
with JBD2_UNMOUNT, since this should never happen. However, while ltp running
stress tests, it was observed that in case of some error handling paths, it is
possible for update_super_work to start a transaction after the journal is
destroyed eg:
(umount)
ext4_kill_sb
kill_block_super
generic_shutdown_super
sync_filesystem /* commits all txns */
evict_inodes
/* might start a new txn */
ext4_put_super
flush_work(&sbi->s_sb_upd_work) /* flush the workqueue */
jbd2_journal_destroy
journal_kill_thread
journal->j_flags |= JBD2_UNMOUNT;
jbd2_journal_commit_transaction
jbd2_journal_get_descriptor_buffer
jbd2_journal_bmap
ext4_journal_bmap
ext4_map_blocks
...
ext4_inode_error
ext4_handle_error
schedule_work(&sbi->s_sb_upd_work)
/* work queue kicks in */
update_super_work
jbd2_journal_start
start_this_handle
BUG_ON(journal->j_flags &
JBD2_UNMOUNT)
Hence, introduce a new mount flag to indicate journal is destroying and only do
a journaled (and deferred) update of sb if this flag is not set. Otherwise, just
fallback to an un-journaled commit.
Further, in the journal destroy path, we have the following sequence:
1. Set mount flag indicating journal is destroying
2. force a commit and wait for it
3. flush pending sb updates
This sequence is important as it ensures that, after this point, there is no sb
update that might be journaled so it is safe to update the sb outside the
journal. (To avoid race discussed in 2d01ddc86606)
Also, we don't need a similar check in ext4_grp_locked_error since it is only
called from mballoc and AFAICT it would be always valid to schedule work here. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: bnxt: fix out-of-range access of vnic_info array
The bnxt_queue_{start | stop}() access vnic_info as much as allocated,
which indicates bp->nr_vnics.
So, it should not reach bp->vnic_info[bp->nr_vnics]. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: goto right label 'out_mmap_sem' in ext4_setattr()
Otherwise, if ext4_inode_attach_jinode() fails, a hung task will
happen because filemap_invalidate_unlock() isn't called to unlock
mapping->invalidate_lock. Like this:
EXT4-fs error (device sda) in ext4_setattr:5557: Out of memory
INFO: task fsstress:374 blocked for more than 122 seconds.
Not tainted 6.14.0-rc1-next-20250206-xfstests-dirty #726
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:fsstress state:D stack:0 pid:374 tgid:374 ppid:373
task_flags:0x440140 flags:0x00000000
Call Trace:
<TASK>
__schedule+0x2c9/0x7f0
schedule+0x27/0xa0
schedule_preempt_disabled+0x15/0x30
rwsem_down_read_slowpath+0x278/0x4c0
down_read+0x59/0xb0
page_cache_ra_unbounded+0x65/0x1b0
filemap_get_pages+0x124/0x3e0
filemap_read+0x114/0x3d0
vfs_read+0x297/0x360
ksys_read+0x6c/0xe0
do_syscall_64+0x4b/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix adding folio to bio
>4GB folio is possible on some ARCHs, such as aarch64, 16GB hugepage
is supported, then 'offset' of folio can't be held in 'unsigned int',
cause warning in bio_add_folio_nofail() and IO failure.
Fix it by adjusting 'page' & trimming 'offset' so that `->bi_offset` won't
be overflow, and folio can be added to bio successfully. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid accessing uninitialized curseg
syzbot reports a f2fs bug as below:
F2FS-fs (loop3): Stopped filesystem due to reason: 7
kworker/u8:7: attempt to access beyond end of device
BUG: unable to handle page fault for address: ffffed1604ea3dfa
RIP: 0010:get_ckpt_valid_blocks fs/f2fs/segment.h:361 [inline]
RIP: 0010:has_curseg_enough_space fs/f2fs/segment.h:570 [inline]
RIP: 0010:__get_secs_required fs/f2fs/segment.h:620 [inline]
RIP: 0010:has_not_enough_free_secs fs/f2fs/segment.h:633 [inline]
RIP: 0010:has_enough_free_secs+0x575/0x1660 fs/f2fs/segment.h:649
<TASK>
f2fs_is_checkpoint_ready fs/f2fs/segment.h:671 [inline]
f2fs_write_inode+0x425/0x540 fs/f2fs/inode.c:791
write_inode fs/fs-writeback.c:1525 [inline]
__writeback_single_inode+0x708/0x10d0 fs/fs-writeback.c:1745
writeback_sb_inodes+0x820/0x1360 fs/fs-writeback.c:1976
wb_writeback+0x413/0xb80 fs/fs-writeback.c:2156
wb_do_writeback fs/fs-writeback.c:2303 [inline]
wb_workfn+0x410/0x1080 fs/fs-writeback.c:2343
process_one_work kernel/workqueue.c:3236 [inline]
process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3317
worker_thread+0x870/0xd30 kernel/workqueue.c:3398
kthread+0x7a9/0x920 kernel/kthread.c:464
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Commit 8b10d3653735 ("f2fs: introduce FAULT_NO_SEGMENT") allows to trigger
no free segment fault in allocator, then it will update curseg->segno to
NULL_SEGNO, though, CP_ERROR_FLAG has been set, f2fs_write_inode() missed
to check the flag, and access invalid curseg->segno directly in below call
path, then resulting in panic:
- f2fs_write_inode
- f2fs_is_checkpoint_ready
- has_enough_free_secs
- has_not_enough_free_secs
- __get_secs_required
- has_curseg_enough_space
- get_ckpt_valid_blocks
: access invalid curseg->segno
To avoid this issue, let's:
- check CP_ERROR_FLAG flag in prior to f2fs_is_checkpoint_ready() in
f2fs_write_inode().
- in has_curseg_enough_space(), save curseg->segno into a temp variable,
and verify its validation before use. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Clear affinity hint before calling ath12k_pci_free_irq() in error path
If a shared IRQ is used by the driver due to platform limitation, then the
IRQ affinity hint is set right after the allocation of IRQ vectors in
ath12k_pci_msi_alloc(). This does no harm unless one of the functions
requesting the IRQ fails and attempt to free the IRQ.
This may end up with a warning from the IRQ core that is expecting the
affinity hint to be cleared before freeing the IRQ:
kernel/irq/manage.c:
/* make sure affinity_hint is cleaned up */
if (WARN_ON_ONCE(desc->affinity_hint))
desc->affinity_hint = NULL;
So to fix this issue, clear the IRQ affinity hint before calling
ath12k_pci_free_irq() in the error path. The affinity will be cleared once
again further down the error path due to code organization, but that does
no harm. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: reject on-disk inodes of an unsupported type
Syzbot has reported the following BUG:
kernel BUG at fs/inode.c:668!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 3 UID: 0 PID: 139 Comm: jfsCommit Not tainted 6.12.0-rc4-syzkaller-00085-g4e46774408d9 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
RIP: 0010:clear_inode+0x168/0x190
Code: 4c 89 f7 e8 ba fe e5 ff e9 61 ff ff ff 44 89 f1 80 e1 07 80 c1 03 38 c1 7c c1 4c 89 f7 e8 90 ff e5 ff eb b7
0b e8 01 5d 7f ff 90 0f 0b e8 f9 5c 7f ff 90 0f 0b e8 f1 5c 7f
RSP: 0018:ffffc900027dfae8 EFLAGS: 00010093
RAX: ffffffff82157a87 RBX: 0000000000000001 RCX: ffff888104d4b980
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: ffffc900027dfc90 R08: ffffffff82157977 R09: fffff520004fbf38
R10: dffffc0000000000 R11: fffff520004fbf38 R12: dffffc0000000000
R13: ffff88811315bc00 R14: ffff88811315bda8 R15: ffff88811315bb80
FS: 0000000000000000(0000) GS:ffff888135f00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005565222e0578 CR3: 0000000026ef0000 CR4: 00000000000006f0
Call Trace:
<TASK>
? __die_body+0x5f/0xb0
? die+0x9e/0xc0
? do_trap+0x15a/0x3a0
? clear_inode+0x168/0x190
? do_error_trap+0x1dc/0x2c0
? clear_inode+0x168/0x190
? __pfx_do_error_trap+0x10/0x10
? report_bug+0x3cd/0x500
? handle_invalid_op+0x34/0x40
? clear_inode+0x168/0x190
? exc_invalid_op+0x38/0x50
? asm_exc_invalid_op+0x1a/0x20
? clear_inode+0x57/0x190
? clear_inode+0x167/0x190
? clear_inode+0x168/0x190
? clear_inode+0x167/0x190
jfs_evict_inode+0xb5/0x440
? __pfx_jfs_evict_inode+0x10/0x10
evict+0x4ea/0x9b0
? __pfx_evict+0x10/0x10
? iput+0x713/0xa50
txUpdateMap+0x931/0xb10
? __pfx_txUpdateMap+0x10/0x10
jfs_lazycommit+0x49a/0xb80
? _raw_spin_unlock_irqrestore+0x8f/0x140
? lockdep_hardirqs_on+0x99/0x150
? __pfx_jfs_lazycommit+0x10/0x10
? __pfx_default_wake_function+0x10/0x10
? __kthread_parkme+0x169/0x1d0
? __pfx_jfs_lazycommit+0x10/0x10
kthread+0x2f2/0x390
? __pfx_jfs_lazycommit+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x4d/0x80
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
This happens when 'clear_inode()' makes an attempt to finalize an underlying
JFS inode of unknown type. According to JFS layout description from
https://jfs.sourceforge.net/project/pub/jfslayout.pdf, inode types from 5 to
15 are reserved for future extensions and should not be encountered on a valid
filesystem. So add an extra check for valid inode type in 'copy_from_dinode()'. |
