| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: csa unmap use uninterruptible lock
After process exit to unmap csa and free GPU vm, if signal is accepted
and then waiting to take vm lock is interrupted and return, it causes
memory leaking and below warning backtrace.
Change to use uninterruptible wait lock fix the issue.
WARNING: CPU: 69 PID: 167800 at amd/amdgpu/amdgpu_kms.c:1525
amdgpu_driver_postclose_kms+0x294/0x2a0 [amdgpu]
Call Trace:
<TASK>
drm_file_free.part.0+0x1da/0x230 [drm]
drm_close_helper.isra.0+0x65/0x70 [drm]
drm_release+0x6a/0x120 [drm]
amdgpu_drm_release+0x51/0x60 [amdgpu]
__fput+0x9f/0x280
____fput+0xe/0x20
task_work_run+0x67/0xa0
do_exit+0x217/0x3c0
do_group_exit+0x3b/0xb0
get_signal+0x14a/0x8d0
arch_do_signal_or_restart+0xde/0x100
exit_to_user_mode_loop+0xc1/0x1a0
exit_to_user_mode_prepare+0xf4/0x100
syscall_exit_to_user_mode+0x17/0x40
do_syscall_64+0x69/0xc0
(cherry picked from commit 7dbbfb3c171a6f63b01165958629c9c26abf38ab) |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
DSA has 2 kinds of drivers:
1. Those who call dsa_switch_suspend() and dsa_switch_resume() from
their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz
2. Those who don't: all others. The above methods should be optional.
For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(),
and dsa_switch_resume() calls dsa_user_resume() -> phylink_start().
These seem good candidates for setting mac_managed_pm = true because
that is essentially its definition [1], but that does not seem to be the
biggest problem for now, and is not what this change focuses on.
Talking strictly about the 2nd category of DSA drivers here (which
do not have MAC managed PM, meaning that for their attached PHYs,
mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full),
I have noticed that the following warning from mdio_bus_phy_resume() is
triggered:
WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY &&
phydev->state != PHY_UP);
because the PHY state machine is running.
It's running as a result of a previous dsa_user_open() -> ... ->
phylink_start() -> phy_start() having been initiated by the user.
The previous mdio_bus_phy_suspend() was supposed to have called
phy_stop_machine(), but it didn't. So this is why the PHY is in state
PHY_NOLINK by the time mdio_bus_phy_resume() runs.
mdio_bus_phy_suspend() did not call phy_stop_machine() because for
phylink, the phydev->adjust_link function pointer is NULL. This seems a
technicality introduced by commit fddd91016d16 ("phylib: fix PAL state
machine restart on resume"). That commit was written before phylink
existed, and was intended to avoid crashing with consumer drivers which
don't use the PHY state machine - phylink always does, when using a PHY.
But phylink itself has historically not been developed with
suspend/resume in mind, and apparently not tested too much in that
scenario, allowing this bug to exist unnoticed for so long. Plus, prior
to the WARN_ON(), it would have likely been invisible.
This issue is not in fact restricted to type 2 DSA drivers (according to
the above ad-hoc classification), but can be extrapolated to any MAC
driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where
the issue was reported. Assuming mac_managed_pm is set correctly, a
quick search indicates the following other drivers might be affected:
$ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm
drivers/net/ethernet/atheros/ag71xx.c
drivers/net/ethernet/microchip/sparx5/sparx5_main.c
drivers/net/ethernet/microchip/lan966x/lan966x_main.c
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
drivers/net/ethernet/freescale/ucc_geth.c
drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
drivers/net/ethernet/marvell/mvneta.c
drivers/net/ethernet/marvell/prestera/prestera_main.c
drivers/net/ethernet/mediatek/mtk_eth_soc.c
drivers/net/ethernet/altera/altera_tse_main.c
drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
drivers/net/ethernet/meta/fbnic/fbnic_phylink.c
drivers/net/ethernet/tehuti/tn40_phy.c
drivers/net/ethernet/mscc/ocelot_net.c
Make the existing conditions dependent on the PHY device having a
phydev->phy_link_change() implementation equal to the default
phy_link_change() provided by phylib. Otherwise, we implicitly know that
the phydev has the phylink-provided phylink_phy_change() callback, and
when phylink is used, the PHY state machine always needs to be stopped/
started on the suspend/resume path. The code is structured as such that
if phydev->phy_link_change() is absent, it is a matter of time until the
kernel will crash - no need to further complicate the test.
Thus, for the situation where the PM is not managed b
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in ksmbd_session_rpc_open
A UAF issue can occur due to a race condition between
ksmbd_session_rpc_open() and __session_rpc_close().
Add rpc_lock to the session to protect it. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix RCU stall while reaping monitor destination ring
While processing the monitor destination ring, MSDUs are reaped from the
link descriptor based on the corresponding buf_id.
However, sometimes the driver cannot obtain a valid buffer corresponding
to the buf_id received from the hardware. This causes an infinite loop
in the destination processing, resulting in a kernel crash.
kernel log:
ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309
ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed
ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309
ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed
Fix this by skipping the problematic buf_id and reaping the next entry,
replacing the break with the next MSDU processing.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
Fix memory leak in posix_clock_open()
If the clk ops.open() function returns an error, we don't release the
pccontext we allocated for this clock.
Re-organize the code slightly to make it all more obvious. |
| A flaw was found in Undertow. Servlets using a method that calls HttpServletRequestImpl.getParameterNames() can cause an OutOfMemoryError when the client sends a request with large parameter names. This issue can be exploited by an unauthorized user to cause a remote denial-of-service (DoS) attack. |
| SiYuan is a personal knowledge management system. Versions prior to 3.5.4 contain a logic vulnerability in the /api/file/globalCopyFiles endpoint. The function allows authenticated users to copy files from any location on the server's filesystem into the application's workspace without proper path validation. The vulnerability exists in the api/file.go source code. The function globalCopyFiles accepts a list of source paths (srcs) from the JSON request body. While the code checks if the source file exists using filelock.IsExist(src), it fails to validate whether the source path resides within the authorized workspace directory. Version 3.5.4 patches the issue. |
| SiYuan is a personal knowledge management system. Versions prior to 3.5.4 have a stored Cross-Site Scripting (XSS) vulnerability that allows an attacker to inject arbitrary HTML attributes into the `icon` attribute of a block via the `/api/attr/setBlockAttrs` API. The payload is later rendered in the dynamic icon feature in an unsanitized context, leading to stored XSS and, in the desktop environment, potential remote code execution (RCE). This issue bypasses the previous fix for issue `#15970` (XSS → RCE via dynamic icons). Version 3.5.4 contains an updated fix. |
| Kyocera Command Center RX ECOSYS M2035dn contains a directory traversal vulnerability that allows unauthenticated attackers to read sensitive system files by manipulating file paths under the /js/ path. Attackers can exploit the issue by sending requests like /js/../../../../.../etc/passwd%00.jpg (null-byte appended traversal) to access critical files such as /etc/passwd and /etc/shadow. |
| birkir prime <= 0.4.0.beta.0 contains a cross-site request forgery vulnerability in its GraphQL endpoint that allows attackers to exploit GET-based query requests. Attackers can craft malicious GET requests to trigger unauthorized actions against privileged users by manipulating GraphQL query parameters. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on
SRX1600, SRX2300, SRX 4000 Series, and SRX5000 Series with SPC3
allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
If a sequence of specific PIM packets is received, this will cause a flowd crash and restart.
This issue affects Junos OS:
* all versions before 21.2R3-S9,
* 21.4 versions before 21.4R3-S11,
* 22.2 versions before 22.2R3-S7,
* 22.4 versions before 22.4R3-S6,
* 23.2 versions before 23.2R2-S4,
* 23.4 versions before 23.4R2-S4,
* 24.2 versions before 24.2R2.
This is a similar, but different vulnerability than the issue reported as
CVE-2024-47503, published in JSA88133. |
| A vulnerability was detected in quickjs-ng quickjs up to 0.11.0. Affected is an unknown function of the file quickjs.c of the component Atomics Ops Handler. The manipulation results in use after free. The attack can be executed remotely. The exploit is now public and may be used. The patch is identified as ea3e9d77454e8fc9cb3ef3c504e9c16af5a80141. Applying a patch is advised to resolve this issue. |
| A flaw has been found in quickjs-ng quickjs up to 0.11.0. Affected by this vulnerability is the function js_typed_array_constructor_ta of the file quickjs.c. This manipulation causes heap-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been published and may be used. Patch name: 53aebe66170d545bb6265906fe4324e4477de8b4. It is suggested to install a patch to address this issue. |
| A flaw in Zephyr’s network stack allows an IPv4 packet containing ICMP type 128 to be misclassified as an ICMPv6 Echo Request. This results in an out-of-bounds memory read and creates a potential information-leak vulnerability in the networking subsystem. |
| vLLM is an inference and serving engine for large language models (LLMs). Starting in version 0.10.1 and prior to version 0.14.0, vLLM loads Hugging Face `auto_map` dynamic modules during model resolution without gating on `trust_remote_code`, allowing attacker-controlled Python code in a model repo/path to execute at server startup. An attacker who can influence the model repo/path (local directory or remote Hugging Face repo) can achieve arbitrary code execution on the vLLM host during model load. This happens before any request handling and does not require API access. Version 0.14.0 fixes the issue. |
| vLLM is an inference and serving engine for large language models (LLMs). Prior to version 0.14.1, a Server-Side Request Forgery (SSRF) vulnerability exists in the `MediaConnector` class within the vLLM project's multimodal feature set. The load_from_url and load_from_url_async methods obtain and process media from URLs provided by users, using different Python parsing libraries when restricting the target host. These two parsing libraries have different interpretations of backslashes, which allows the host name restriction to be bypassed. This allows an attacker to coerce the vLLM server into making arbitrary requests to internal network resources. This vulnerability is particularly critical in containerized environments like `llm-d`, where a compromised vLLM pod could be used to scan the internal network, interact with other pods, and potentially cause denial of service or access sensitive data. For example, an attacker could make the vLLM pod send malicious requests to an internal `llm-d` management endpoint, leading to system instability by falsely reporting metrics like the KV cache state. Version 0.14.1 contains a patch for the issue. |
| Typebot is an open-source chatbot builder. In versions prior to 3.13.2, client-side script execution in Typebot allows stealing all stored credentials from any user. When a victim previews a malicious typebot by clicking "Run", JavaScript executes in their browser and exfiltrates their OpenAI keys, Google Sheets tokens, and SMTP passwords. The `/api/trpc/credentials.getCredentials` endpoint returns plaintext API keys without verifying credential ownership. Version 3.13.2 fixes the issue. |
| A denial-of-service (DoS) vulnerability exists in google.protobuf.json_format.ParseDict() in Python, where the max_recursion_depth limit can be bypassed when parsing nested google.protobuf.Any messages.
Due to missing recursion depth accounting inside the internal Any-handling logic, an attacker can supply deeply nested Any structures that bypass the intended recursion limit, eventually exhausting Python’s recursion stack and causing a RecursionError. |
| Typebot is an open-source chatbot builder. In versions prior to 3.13.1, a Server-Side Request Forgery (SSRF) vulnerability in the Typebot webhook block (HTTP Request component) functionality allows authenticated users to make arbitrary HTTP requests from the server, including access to AWS Instance Metadata Service (IMDS). By bypassing IMDSv2 protection through custom header injection, attackers can extract temporary AWS IAM credentials for the EKS node role, leading to complete compromise of the Kubernetes cluster and associated AWS infrastructure. Version 3.13.1 fixes the issue. |
| Typebot is an open-source chatbot builder. In version 3.9.0 up to but excluding version 3.13.0, an Insecure Direct Object Reference (IDOR) vulnerability exists in the API token management endpoint. An authenticated attacker can delete any user's API token and retrieve its value by simply knowing the target user's ID and token ID, without requiring authorization checks. Version 3.13.0 fixes the issue. |
