| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: proc: size address buffers for %pISpc output
The AF_RXRPC procfs helpers format local and remote socket addresses into
fixed 50-byte stack buffers with "%pISpc".
That is too small for the longest current-tree IPv6-with-port form the
formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a
dotted-quad tail not only for v4mapped addresses, but also for ISATAP
addresses via ipv6_addr_is_isatap().
As a result, a case such as
[ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535
is possible with the current formatter. That is 50 visible characters, so
51 bytes including the trailing NUL, which does not fit in the existing
char[50] buffers used by net/rxrpc/proc.c.
Size the buffers from the formatter's maximum textual form and switch the
call sites to scnprintf().
Changes since v1:
- correct the changelog to cite the actual maximum current-tree case
explicitly
- frame the proof around the ISATAP formatting path instead of the earlier
mapped-v4 example |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix buffer overread in rxgk_do_verify_authenticator()
Fix rxgk_do_verify_authenticator() to check the buffer size before checking
the nonce. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: fix page_pool error handling in lan966x_fdma_rx_alloc_page_pool()
page_pool_create() can return an ERR_PTR on failure. The return value
is used unconditionally in the loop that follows, passing the error
pointer through xdp_rxq_info_reg_mem_model() into page_pool_use_xdp_mem(),
which dereferences it, causing a kernel oops.
Add an IS_ERR check after page_pool_create() to return early on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix RxGK token loading to check bounds
rxrpc_preparse_xdr_yfs_rxgk() reads the raw key length and ticket length
from the XDR token as u32 values and passes each through round_up(x, 4)
before using the rounded value for validation and allocation. When the raw
length is >= 0xfffffffd, round_up() wraps to 0, so the bounds check and
kzalloc both use 0 while the subsequent memcpy still copies the original
~4 GiB value, producing a heap buffer overflow reachable from an
unprivileged add_key() call.
Fix this by:
(1) Rejecting raw key lengths above AFSTOKEN_GK_KEY_MAX and raw ticket
lengths above AFSTOKEN_GK_TOKEN_MAX before rounding, consistent with
the caps that the RxKAD path already enforces via AFSTOKEN_RK_TIX_MAX.
(2) Sizing the flexible-array allocation from the validated raw key
length via struct_size_t() instead of the rounded value.
(3) Caching the raw lengths so that the later field assignments and
memcpy calls do not re-read from the token, eliminating a class of
TOCTOU re-parse.
The control path (valid token with lengths within bounds) is unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix call removal to use RCU safe deletion
Fix rxrpc call removal from the rxnet->calls list to use list_del_rcu()
rather than list_del_init() to prevent stuffing up reading
/proc/net/rxrpc/calls from potentially getting into an infinite loop.
This, however, means that list_empty() no longer works on an entry that's
been deleted from the list, making it harder to detect prior deletion. Fix
this by:
Firstly, make rxrpc_destroy_all_calls() only dump the first ten calls that
are unexpectedly still on the list. Limiting the number of steps means
there's no need to call cond_resched() or to remove calls from the list
here, thereby eliminating the need for rxrpc_put_call() to check for that.
rxrpc_put_call() can then be fixed to unconditionally delete the call from
the list as it is the only place that the deletion occurs. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: move async event work off nvmet-wq
For target nvmet_ctrl_free() flushes ctrl->async_event_work.
If nvmet_ctrl_free() runs on nvmet-wq, the flush re-enters workqueue
completion for the same worker:-
A. Async event work queued on nvmet-wq (prior to disconnect):
nvmet_execute_async_event()
queue_work(nvmet_wq, &ctrl->async_event_work)
nvmet_add_async_event()
queue_work(nvmet_wq, &ctrl->async_event_work)
B. Full pre-work chain (RDMA CM path):
nvmet_rdma_cm_handler()
nvmet_rdma_queue_disconnect()
__nvmet_rdma_queue_disconnect()
queue_work(nvmet_wq, &queue->release_work)
process_one_work()
lock((wq_completion)nvmet-wq) <--------- 1st
nvmet_rdma_release_queue_work()
C. Recursive path (same worker):
nvmet_rdma_release_queue_work()
nvmet_rdma_free_queue()
nvmet_sq_destroy()
nvmet_ctrl_put()
nvmet_ctrl_free()
flush_work(&ctrl->async_event_work)
__flush_work()
touch_wq_lockdep_map()
lock((wq_completion)nvmet-wq) <--------- 2nd
Lockdep splat:
============================================
WARNING: possible recursive locking detected
6.19.0-rc3nvme+ #14 Tainted: G N
--------------------------------------------
kworker/u192:42/44933 is trying to acquire lock:
ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90
but task is already holding lock:
ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660
3 locks held by kworker/u192:42/44933:
#0: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660
#1: ffffc9000e6cbe28 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x660
#2: ffffffff82d4db60 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530
Workqueue: nvmet-wq nvmet_rdma_release_queue_work [nvmet_rdma]
Call Trace:
__flush_work+0x268/0x530
nvmet_ctrl_free+0x140/0x310 [nvmet]
nvmet_cq_put+0x74/0x90 [nvmet]
nvmet_rdma_free_queue+0x23/0xe0 [nvmet_rdma]
nvmet_rdma_release_queue_work+0x19/0x50 [nvmet_rdma]
process_one_work+0x206/0x660
worker_thread+0x184/0x320
kthread+0x10c/0x240
ret_from_fork+0x319/0x390
Move async event work to a dedicated nvmet-aen-wq to avoid reentrant
flush on nvmet-wq. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: fix use-after-free and leak in lan966x_fdma_reload()
When lan966x_fdma_reload() fails to allocate new RX buffers, the restore
path restarts DMA using old descriptors whose pages were already freed
via lan966x_fdma_rx_free_pages(). Since page_pool_put_full_page() can
release pages back to the buddy allocator, the hardware may DMA into
memory now owned by other kernel subsystems.
Additionally, on the restore path, the newly created page pool (if
allocation partially succeeded) is overwritten without being destroyed,
leaking it.
Fix both issues by deferring the release of old pages until after the
new allocation succeeds. Save the old page array before the allocation
so old pages can be freed on the success path. On the failure path, the
old descriptors, pages and page pool are all still valid, making the
restore safe. Also ensure the restore path re-enables NAPI and wakes
the netdev, matching the success path. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Make kvm_get_vcpu_by_cpuid() more robust
kvm_get_vcpu_by_cpuid() takes a cpuid parameter whose type is int, so
cpuid can be negative. Let kvm_get_vcpu_by_cpuid() return NULL for this
case so as to make it more robust.
This fix an out-of-bounds access to kvm_arch::phyid_map::phys_map[]. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix missing NULL checks for kstrdup()
1. Replace "of_find_node_by_path("/")" with "of_root" to avoid multiple
calls to "of_node_put()".
2. Fix a potential kernel oops during early boot when memory allocation
fails while parsing CPU model from device tree. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix PREEMPT_RT raw/bh spinlock nesting for async VC handling
Switch from using the completion's raw spinlock to a local lock in the
idpf_vc_xn struct. The conversion is safe because complete/_all() are
called outside the lock and there is no reason to share the completion
lock in the current logic. This avoids invalid wait context reported by
the kernel due to the async handler taking BH spinlock:
[ 805.726977] =============================
[ 805.726991] [ BUG: Invalid wait context ]
[ 805.727006] 7.0.0-rc2-net-devq-031026+ #28 Tainted: G S OE
[ 805.727026] -----------------------------
[ 805.727038] kworker/u261:0/572 is trying to lock:
[ 805.727051] ff190da6a8dbb6a0 (&vport_config->mac_filter_list_lock){+...}-{3:3}, at: idpf_mac_filter_async_handler+0xe9/0x260 [idpf]
[ 805.727099] other info that might help us debug this:
[ 805.727111] context-{5:5}
[ 805.727119] 3 locks held by kworker/u261:0/572:
[ 805.727132] #0: ff190da6db3e6148 ((wq_completion)idpf-0000:83:00.0-mbx){+.+.}-{0:0}, at: process_one_work+0x4b5/0x730
[ 805.727163] #1: ff3c6f0a6131fe50 ((work_completion)(&(&adapter->mbx_task)->work)){+.+.}-{0:0}, at: process_one_work+0x1e5/0x730
[ 805.727191] #2: ff190da765190020 (&x->wait#34){+.+.}-{2:2}, at: idpf_recv_mb_msg+0xc8/0x710 [idpf]
[ 805.727218] stack backtrace:
...
[ 805.727238] Workqueue: idpf-0000:83:00.0-mbx idpf_mbx_task [idpf]
[ 805.727247] Call Trace:
[ 805.727249] <TASK>
[ 805.727251] dump_stack_lvl+0x77/0xb0
[ 805.727259] __lock_acquire+0xb3b/0x2290
[ 805.727268] ? __irq_work_queue_local+0x59/0x130
[ 805.727275] lock_acquire+0xc6/0x2f0
[ 805.727277] ? idpf_mac_filter_async_handler+0xe9/0x260 [idpf]
[ 805.727284] ? _printk+0x5b/0x80
[ 805.727290] _raw_spin_lock_bh+0x38/0x50
[ 805.727298] ? idpf_mac_filter_async_handler+0xe9/0x260 [idpf]
[ 805.727303] idpf_mac_filter_async_handler+0xe9/0x260 [idpf]
[ 805.727310] idpf_recv_mb_msg+0x1c8/0x710 [idpf]
[ 805.727317] process_one_work+0x226/0x730
[ 805.727322] worker_thread+0x19e/0x340
[ 805.727325] ? __pfx_worker_thread+0x10/0x10
[ 805.727328] kthread+0xf4/0x130
[ 805.727333] ? __pfx_kthread+0x10/0x10
[ 805.727336] ret_from_fork+0x32c/0x410
[ 805.727345] ? __pfx_kthread+0x10/0x10
[ 805.727347] ret_from_fork_asm+0x1a/0x30
[ 805.727354] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix integer underflow in chain mode
The jumbo_frm() chain-mode implementation unconditionally computes
len = nopaged_len - bmax;
where nopaged_len = skb_headlen(skb) (linear bytes only) and bmax is
BUF_SIZE_8KiB or BUF_SIZE_2KiB. However, the caller stmmac_xmit()
decides to invoke jumbo_frm() based on skb->len (total length including
page fragments):
is_jumbo = stmmac_is_jumbo_frm(priv, skb->len, enh_desc);
When a packet has a small linear portion (nopaged_len <= bmax) but a
large total length due to page fragments (skb->len > bmax), the
subtraction wraps as an unsigned integer, producing a huge len value
(~0xFFFFxxxx). This causes the while (len != 0) loop to execute
hundreds of thousands of iterations, passing skb->data + bmax * i
pointers far beyond the skb buffer to dma_map_single(). On IOMMU-less
SoCs (the typical deployment for stmmac), this maps arbitrary kernel
memory to the DMA engine, constituting a kernel memory disclosure and
potential memory corruption from hardware.
Fix this by introducing a buf_len local variable clamped to
min(nopaged_len, bmax). Computing len = nopaged_len - buf_len is then
always safe: it is zero when the linear portion fits within a single
descriptor, causing the while (len != 0) loop to be skipped naturally,
and the fragment loop in stmmac_xmit() handles page fragments afterward. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix deadlock during netdev reset with active connections
Resolve deadlock that occurs when user executes netdev reset while RDMA
applications (e.g., rping) are active. The netdev reset causes ice
driver to remove irdma auxiliary driver, triggering device_delete and
subsequent client removal. During client removal, uverbs_client waits
for QP reference count to reach zero while cma_client holds the final
reference, creating circular dependency and indefinite wait in iWARP
mode. Skip QP reference count wait during device reset to prevent
deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/stat: deallocate damon_call() failure leaking damon_ctx
damon_stat_start() always allocates the module's damon_ctx object
(damon_stat_context). Meanwhile, if damon_call() in the function fails,
the damon_ctx object is not deallocated. Hence, if the damon_call() is
failed, and the user writes Y to “enabled” again, the previously
allocated damon_ctx object is leaked.
This cannot simply be fixed by deallocating the damon_ctx object when
damon_call() fails. That's because damon_call() failure doesn't guarantee
the kdamond main function, which accesses the damon_ctx object, is
completely finished. In other words, if damon_stat_start() deallocates
the damon_ctx object after damon_call() failure, the not-yet-terminated
kdamond could access the freed memory (use-after-free).
Fix the leak while avoiding the use-after-free by keeping returning
damon_stat_start() without deallocating the damon_ctx object after
damon_call() failure, but deallocating it when the function is invoked
again and the kdamond is completely terminated. If the kdamond is not yet
terminated, simply return -EAGAIN, as the kdamond will soon be terminated.
The issue was discovered [1] by sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs: dealloc repeat_call_control if damon_call() fails
damon_call() for repeat_call_control of DAMON_SYSFS could fail if somehow
the kdamond is stopped before the damon_call(). It could happen, for
example, when te damon context was made for monitroing of a virtual
address processes, and the process is terminated immediately, before the
damon_call() invocation. In the case, the dyanmically allocated
repeat_call_control is not deallocated and leaked.
Fix the leak by deallocating the repeat_call_control under the
damon_call() failure.
This issue is discovered by sashiko [1]. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vma: fix memory leak in __mmap_region()
commit 605f6586ecf7 ("mm/vma: do not leak memory when .mmap_prepare
swaps the file") handled the success path by skipping get_file() via
file_doesnt_need_get, but missed the error path.
When /dev/zero is mmap'd with MAP_SHARED, mmap_zero_prepare() calls
shmem_zero_setup_desc() which allocates a new shmem file to back the
mapping. If __mmap_new_vma() subsequently fails, this replacement
file is never fput()'d - the original is released by
ksys_mmap_pgoff(), but nobody releases the new one.
Add fput() for the swapped file in the error path.
Reproducible with fault injection.
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 1
CPU: 2 UID: 0 PID: 366 Comm: syz.7.14 Not tainted 7.0.0-rc6 #2 PREEMPT(full)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x164/0x1f0
should_fail_ex+0x525/0x650
should_failslab+0xdf/0x140
kmem_cache_alloc_noprof+0x78/0x630
vm_area_alloc+0x24/0x160
__mmap_region+0xf6b/0x2660
mmap_region+0x2eb/0x3a0
do_mmap+0xc79/0x1240
vm_mmap_pgoff+0x252/0x4c0
ksys_mmap_pgoff+0xf8/0x120
__x64_sys_mmap+0x12a/0x190
do_syscall_64+0xa9/0x580
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
BUG: memory leak
unreferenced object 0xffff8881118aca80 (size 360):
comm "syz.7.14", pid 366, jiffies 4294913255
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff c0 28 4d ae ff ff ff ff .........(M.....
backtrace (crc db0f53bc):
kmem_cache_alloc_noprof+0x3ab/0x630
alloc_empty_file+0x5a/0x1e0
alloc_file_pseudo+0x135/0x220
__shmem_file_setup+0x274/0x420
shmem_zero_setup_desc+0x9c/0x170
mmap_zero_prepare+0x123/0x140
__mmap_region+0xdda/0x2660
mmap_region+0x2eb/0x3a0
do_mmap+0xc79/0x1240
vm_mmap_pgoff+0x252/0x4c0
ksys_mmap_pgoff+0xf8/0x120
__x64_sys_mmap+0x12a/0x190
do_syscall_64+0xa9/0x580
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Found by syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: hold claim backbone gateways by reference
batadv_bla_add_claim() can replace claim->backbone_gw and drop the old
gateway's last reference while readers still follow the pointer.
The netlink claim dump path dereferences claim->backbone_gw->orig and
takes claim->backbone_gw->crc_lock without pinning the underlying
backbone gateway. batadv_bla_check_claim() still has the same naked
pointer access pattern.
Reuse batadv_bla_claim_get_backbone_gw() in both readers so they operate
on a stable gateway reference until the read-side work is complete.
This keeps the dump and claim-check paths aligned with the lifetime
rules introduced for the other BLA claim readers. |
| In the Linux kernel, the following vulnerability has been resolved:
net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit()
When dma_map_single() fails in tse_start_xmit(), the function returns
NETDEV_TX_OK without freeing the skb. Since NETDEV_TX_OK tells the
stack the packet was consumed, the skb is never freed, leaking memory
on every DMA mapping failure.
Add dev_kfree_skb_any() before returning to properly free the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: allocate rx skb before consuming bytes
pn532_receive_buf() reports the number of accepted bytes to the serdev
core. The current code consumes bytes into recv_skb and may already hand
a complete frame to pn533_recv_frame() before allocating a fresh receive
buffer.
If that alloc_skb() fails, the callback returns 0 even though it has
already consumed bytes, and it leaves recv_skb as NULL for the next
receive callback. That breaks the receive_buf() accounting contract and
can also lead to a NULL dereference on the next skb_put_u8().
Allocate the receive skb lazily before consuming the next byte instead.
If allocation fails, return the number of bytes already accepted. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: clear trailing padding in build_polexpire()
build_expire() clears the trailing padding bytes of struct
xfrm_user_expire after setting the hard field via memset_after(),
but the analogous function build_polexpire() does not do this for
struct xfrm_user_polexpire.
The padding bytes after the __u8 hard field are left
uninitialized from the heap allocation, and are then sent to
userspace via netlink multicast to XFRMNLGRP_EXPIRE listeners,
leaking kernel heap memory contents.
Add the missing memset_after() call, matching build_expire(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmsmac: Fix dma_free_coherent() size
dma_alloc_consistent() may change the size to align it. The new size is
saved in alloced.
Change the free size to match the allocation size. |
