| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix race condition during IPSec ESN update
In IPSec full offload mode, the device reports an ESN (Extended
Sequence Number) wrap event to the driver. The driver validates this
event by querying the IPSec ASO and checking that the esn_event_arm
field is 0x0, which indicates an event has occurred. After handling
the event, the driver must re-arm the context by setting esn_event_arm
back to 0x1.
A race condition exists in this handling path. After validating the
event, the driver calls mlx5_accel_esp_modify_xfrm() to update the
kernel's xfrm state. This function temporarily releases and
re-acquires the xfrm state lock.
So, need to acknowledge the event first by setting esn_event_arm to
0x1. This prevents the driver from reprocessing the same ESN update if
the hardware sends events for other reason. Since the next ESN update
only occurs after nearly 2^31 packets are received, there's no risk of
missing an update, as it will happen long after this handling has
finished.
Processing the event twice causes the ESN high-order bits (esn_msb) to
be incremented incorrectly. The driver then programs the hardware with
this invalid ESN state, which leads to anti-replay failures and a
complete halt of IPSec traffic.
Fix this by re-arming the ESN event immediately after it is validated,
before calling mlx5_accel_esp_modify_xfrm(). This ensures that any
spurious, duplicate events are correctly ignored, closing the race
window. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: add NULL checks for idev in SRv6 paths
__in6_dev_get() can return NULL when the device has no IPv6 configuration
(e.g. MTU < IPV6_MIN_MTU or after NETDEV_UNREGISTER).
Add NULL checks for idev returned by __in6_dev_get() in both
seg6_hmac_validate_skb() and ipv6_srh_rcv() to prevent potential NULL
pointer dereferences. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Prevent concurrent access to IPSec ASO context
The query or updating IPSec offload object is through Access ASO WQE.
The driver uses a single mlx5e_ipsec_aso struct for each PF, which
contains a shared DMA-mapped context for all ASO operations.
A race condition exists because the ASO spinlock is released before
the hardware has finished processing WQE. If a second operation is
initiated immediately after, it overwrites the shared context in the
DMA area.
When the first operation's completion is processed later, it reads
this corrupted context, leading to unexpected behavior and incorrect
results.
This commit fixes the race by introducing a private context within
each IPSec offload object. The shared ASO context is now copied to
this private context while the ASO spinlock is held. Subsequent
processing uses this saved, per-object context, ensuring its integrity
is maintained. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor: Fix previous acpi_processor_errata_piix4() fix
After commi f132e089fe89 ("ACPI: processor: Fix NULL-pointer dereference
in acpi_processor_errata_piix4()"), device pointers may be dereferenced
after dropping references to the device objects pointed to by them,
which may cause a use-after-free to occur.
Moreover, debug messages about enabling the errata may be printed
if the errata flags corresponding to them are unset.
Address all of these issues by moving message printing to the points
in the code where the errata flags are set. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure
ieee80211_tx_prepare_skb() has three error paths, but only two of them
free the skb. The first error path (ieee80211_tx_prepare() returning
TX_DROP) does not free it, while invoke_tx_handlers() failure and the
fragmentation check both do.
Add kfree_skb() to the first error path so all three are consistent,
and remove the now-redundant frees in callers (ath9k, mt76,
mac80211_hwsim) to avoid double-free.
Document the skb ownership guarantee in the function's kdoc. |
| In the Linux kernel, the following vulnerability has been resolved:
igc: fix page fault in XDP TX timestamps handling
If an XDP application that requested TX timestamping is shutting down
while the link of the interface in use is still up the following kernel
splat is reported:
[ 883.803618] [ T1554] BUG: unable to handle page fault for address: ffffcfb6200fd008
...
[ 883.803650] [ T1554] Call Trace:
[ 883.803652] [ T1554] <TASK>
[ 883.803654] [ T1554] igc_ptp_tx_tstamp_event+0xdf/0x160 [igc]
[ 883.803660] [ T1554] igc_tsync_interrupt+0x2d5/0x300 [igc]
...
During shutdown of the TX ring the xsk_meta pointers are left behind, so
that the IRQ handler is trying to touch them.
This issue is now being fixed by cleaning up the stale xsk meta data on
TX shutdown. TX timestamps on other queues remain unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: aqc111: Do not perform PM inside suspend callback
syzbot reports "task hung in rpm_resume"
This is caused by aqc111_suspend calling
the PM variant of its write_cmd routine.
The simplified call trace looks like this:
rpm_suspend()
usb_suspend_both() - here udev->dev.power.runtime_status == RPM_SUSPENDING
aqc111_suspend() - called for the usb device interface
aqc111_write32_cmd()
usb_autopm_get_interface()
pm_runtime_resume_and_get()
rpm_resume() - here we call rpm_resume() on our parent
rpm_resume() - Here we wait for a status change that will never happen.
At this point we block another task which holds
rtnl_lock and locks up the whole networking stack.
Fix this by replacing the write_cmd calls with their _nopm variants |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cdc_ncm: add ndpoffset to NDP32 nframes bounds check
The same bounds-check bug fixed for NDP16 in the previous patch also
exists in cdc_ncm_rx_verify_ndp32(). The DPE array size is validated
against the total skb length without accounting for ndpoffset, allowing
out-of-bounds reads when the NDP32 is placed near the end of the NTB.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly.
Compile-tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cdc_ncm: add ndpoffset to NDP16 nframes bounds check
cdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPE
entries fit within the skb. The first check correctly accounts for
ndpoffset:
if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len)
but the second check omits it:
if ((sizeof(struct usb_cdc_ncm_ndp16) +
ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len)
This validates the DPE array size against the total skb length as if
the NDP were at offset 0, rather than at ndpoffset. When the NDP is
placed near the end of the NTB (large wNdpIndex), the DPE entries can
extend past the skb data buffer even though the check passes.
cdc_ncm_rx_fixup() then reads out-of-bounds memory when iterating
the DPE array.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: prevent potential infinite loop in bond_header_parse()
bond_header_parse() can loop if a stack of two bonding devices is setup,
because skb->dev always points to the hierarchy top.
Add new "const struct net_device *dev" parameter to
(struct header_ops)->parse() method to make sure the recursion
is bounded, and that the final leaf parse method is called. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssg-prueth: Fix memory leak in XDP_DROP for non-zero-copy mode
Page recycling was removed from the XDP_DROP path in emac_run_xdp() to
avoid conflicts with AF_XDP zero-copy mode, which uses xsk_buff_free()
instead.
However, this causes a memory leak when running XDP programs that drop
packets in non-zero-copy mode (standard page pool mode). The pages are
never returned to the page pool, leading to OOM conditions.
Fix this by handling cleanup in the caller, emac_rx_packet().
When emac_run_xdp() returns ICSSG_XDP_CONSUMED for XDP_DROP, the
caller now recycles the page back to the page pool. The zero-copy
path, emac_rx_packet_zc() already handles cleanup correctly with
xsk_buff_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: fix use-after-free in mana_hwc_destroy_channel() by reordering teardown
A potential race condition exists in mana_hwc_destroy_channel() where
hwc->caller_ctx is freed before the HWC's Completion Queue (CQ) and
Event Queue (EQ) are destroyed. This allows an in-flight CQ interrupt
handler to dereference freed memory, leading to a use-after-free or
NULL pointer dereference in mana_hwc_handle_resp().
mana_smc_teardown_hwc() signals the hardware to stop but does not
synchronize against IRQ handlers already executing on other CPUs. The
IRQ synchronization only happens in mana_hwc_destroy_cq() via
mana_gd_destroy_eq() -> mana_gd_deregister_irq(). Since this runs
after kfree(hwc->caller_ctx), a concurrent mana_hwc_rx_event_handler()
can dereference freed caller_ctx (and rxq->msg_buf) in
mana_hwc_handle_resp().
Fix this by reordering teardown to reverse-of-creation order: destroy
the TX/RX work queues and CQ/EQ before freeing hwc->caller_ctx. This
ensures all in-flight interrupt handlers complete before the memory they
access is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_h323: fix OOB read in decode_int() CONS case
In decode_int(), the CONS case calls get_bits(bs, 2) to read a length
value, then calls get_uint(bs, len) without checking that len bytes
remain in the buffer. The existing boundary check only validates the
2 bits for get_bits(), not the subsequent 1-4 bytes that get_uint()
reads. This allows a malformed H.323/RAS packet to cause a 1-4 byte
slab-out-of-bounds read.
Add a boundary check for len bytes after get_bits() and before
get_uint(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: fix use-after-free in ctnetlink_dump_exp_ct()
ctnetlink_dump_exp_ct() stores a conntrack pointer in cb->data for the
netlink dump callback ctnetlink_exp_ct_dump_table(), but drops the
conntrack reference immediately after netlink_dump_start(). When the
dump spans multiple rounds, the second recvmsg() triggers the dump
callback which dereferences the now-freed conntrack via nfct_help(ct),
leading to a use-after-free on ct->ext.
The bug is that the netlink_dump_control has no .start or .done
callbacks to manage the conntrack reference across dump rounds. Other
dump functions in the same file (e.g. ctnetlink_get_conntrack) properly
use .start/.done callbacks for this purpose.
Fix this by adding .start and .done callbacks that hold and release the
conntrack reference for the duration of the dump, and move the
nfct_help() call after the cb->args[0] early-return check in the dump
callback to avoid dereferencing ct->ext unnecessarily.
BUG: KASAN: slab-use-after-free in ctnetlink_exp_ct_dump_table+0x4f/0x2e0
Read of size 8 at addr ffff88810597ebf0 by task ctnetlink_poc/133
CPU: 1 UID: 0 PID: 133 Comm: ctnetlink_poc Not tainted 7.0.0-rc2+ #3 PREEMPTLAZY
Call Trace:
<TASK>
ctnetlink_exp_ct_dump_table+0x4f/0x2e0
netlink_dump+0x333/0x880
netlink_recvmsg+0x3e2/0x4b0
? aa_sk_perm+0x184/0x450
sock_recvmsg+0xde/0xf0
Allocated by task 133:
kmem_cache_alloc_noprof+0x134/0x440
__nf_conntrack_alloc+0xa8/0x2b0
ctnetlink_create_conntrack+0xa1/0x900
ctnetlink_new_conntrack+0x3cf/0x7d0
nfnetlink_rcv_msg+0x48e/0x510
netlink_rcv_skb+0xc9/0x1f0
nfnetlink_rcv+0xdb/0x220
netlink_unicast+0x3ec/0x590
netlink_sendmsg+0x397/0x690
__sys_sendmsg+0xf4/0x180
Freed by task 0:
slab_free_after_rcu_debug+0xad/0x1e0
rcu_core+0x5c3/0x9c0 |
| In the Linux kernel, the following vulnerability has been resolved:
net/rose: fix NULL pointer dereference in rose_transmit_link on reconnect
syzkaller reported a bug [1], and the reproducer is available at [2].
ROSE sockets use four sk->sk_state values: TCP_CLOSE, TCP_LISTEN,
TCP_SYN_SENT, and TCP_ESTABLISHED. rose_connect() already rejects
calls for TCP_ESTABLISHED (-EISCONN) and TCP_CLOSE with SS_CONNECTING
(-ECONNREFUSED), but lacks a check for TCP_SYN_SENT.
When rose_connect() is called a second time while the first connection
attempt is still in progress (TCP_SYN_SENT), it overwrites
rose->neighbour via rose_get_neigh(). If that returns NULL, the socket
is left with rose->state == ROSE_STATE_1 but rose->neighbour == NULL.
When the socket is subsequently closed, rose_release() sees
ROSE_STATE_1 and calls rose_write_internal() ->
rose_transmit_link(skb, NULL), causing a NULL pointer dereference.
Per connect(2), a second connect() while a connection is already in
progress should return -EALREADY. Add this missing check for
TCP_SYN_SENT to complete the state validation in rose_connect().
[1] https://syzkaller.appspot.com/bug?extid=d00f90e0af54102fb271
[2] https://gist.github.com/mrpre/9e6779e0d13e2c66779b1653fef80516 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix use-after-free in l2cap_unregister_user
After commit ab4eedb790ca ("Bluetooth: L2CAP: Fix corrupted list in
hci_chan_del"), l2cap_conn_del() uses conn->lock to protect access to
conn->users. However, l2cap_register_user() and l2cap_unregister_user()
don't use conn->lock, creating a race condition where these functions can
access conn->users and conn->hchan concurrently with l2cap_conn_del().
This can lead to use-after-free and list corruption bugs, as reported
by syzbot.
Fix this by changing l2cap_register_user() and l2cap_unregister_user()
to use conn->lock instead of hci_dev_lock(), ensuring consistent locking
for the l2cap_conn structure. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: fsl: qbman: fix race condition in qman_destroy_fq
When QMAN_FQ_FLAG_DYNAMIC_FQID is set, there's a race condition between
fq_table[fq->idx] state and freeing/allocating from the pool and
WARN_ON(fq_table[fq->idx]) in qman_create_fq() gets triggered.
Indeed, we can have:
Thread A Thread B
qman_destroy_fq() qman_create_fq()
qman_release_fqid()
qman_shutdown_fq()
gen_pool_free()
-- At this point, the fqid is available again --
qman_alloc_fqid()
-- so, we can get the just-freed fqid in thread B --
fq->fqid = fqid;
fq->idx = fqid * 2;
WARN_ON(fq_table[fq->idx]);
fq_table[fq->idx] = fq;
fq_table[fq->idx] = NULL;
And adding some logs between qman_release_fqid() and
fq_table[fq->idx] = NULL makes the WARN_ON() trigger a lot more.
To prevent that, ensure that fq_table[fq->idx] is set to NULL before
gen_pool_free() is called by using smp_wmb(). |
| Hirschmann HiOS devices versions prior to 08.1.00 and 07.1.01 contain a denial of service vulnerability in the EtherNet/IP stack where improper handling of packet length fields allows remote attackers to crash or hang the device. Attackers can send specially crafted UDP EtherNet/IP packets with a length value larger than the actual packet size to render the device inoperable. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: fix incorrect pte restoration for lazyfree folios
We batch unmap anonymous lazyfree folios by folio_unmap_pte_batch. If the
batch has a mix of writable and non-writable bits, we may end up setting
the entire batch writable. Fix this by respecting writable bit during
batching.
Although on a successful unmap of a lazyfree folio, the soft-dirty bit is
lost, preserve it on pte restoration by respecting the bit during
batching, to make the fix consistent w.r.t both writable bit and
soft-dirty bit.
I was able to write the below reproducer and crash the kernel.
Explanation of reproducer (set 64K mTHP to always):
Fault in a 64K large folio. Split the VMA at mid-point with
MADV_DONTFORK. fork() - parent points to the folio with 8 writable ptes
and 8 non-writable ptes. Merge the VMAs with MADV_DOFORK so that
folio_unmap_pte_batch() can determine all the 16 ptes as a batch. Do
MADV_FREE on the range to mark the folio as lazyfree. Write to the memory
to dirty the pte, eventually rmap will dirty the folio. Then trigger
reclaim, we will hit the pte restoration path, and the kernel will crash
with the trace given below.
The BUG happens at:
BUG_ON(atomic_inc_return(&ptc->anon_map_count) > 1 && rw);
The code path is asking for anonymous page to be mapped writable into the
pagetable. The BUG_ON() firing implies that such a writable page has been
mapped into the pagetables of more than one process, which breaks
anonymous memory/CoW semantics.
[ 21.134473] kernel BUG at mm/page_table_check.c:118!
[ 21.134497] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
[ 21.135917] Modules linked in:
[ 21.136085] CPU: 1 UID: 0 PID: 1735 Comm: dup-lazyfree Not tainted 7.0.0-rc1-00116-g018018a17770 #1028 PREEMPT
[ 21.136858] Hardware name: linux,dummy-virt (DT)
[ 21.137019] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 21.137308] pc : page_table_check_set+0x28c/0x2a8
[ 21.137607] lr : page_table_check_set+0x134/0x2a8
[ 21.137885] sp : ffff80008a3b3340
[ 21.138124] x29: ffff80008a3b3340 x28: fffffdffc3d14400 x27: ffffd1a55e03d000
[ 21.138623] x26: 0040000000000040 x25: ffffd1a55f7dd000 x24: 0000000000000001
[ 21.139045] x23: 0000000000000001 x22: 0000000000000001 x21: ffffd1a55f217f30
[ 21.139629] x20: 0000000000134521 x19: 0000000000134519 x18: 005c43e000040000
[ 21.140027] x17: 0001400000000000 x16: 0001700000000000 x15: 000000000000ffff
[ 21.140578] x14: 000000000000000c x13: 005c006000000000 x12: 0000000000000020
[ 21.140828] x11: 0000000000000000 x10: 005c000000000000 x9 : ffffd1a55c079ee0
[ 21.141077] x8 : 0000000000000001 x7 : 005c03e000040000 x6 : 000000004000ffff
[ 21.141490] x5 : ffff00017fffce00 x4 : 0000000000000001 x3 : 0000000000000002
[ 21.141741] x2 : 0000000000134510 x1 : 0000000000000000 x0 : ffff0000c08228c0
[ 21.141991] Call trace:
[ 21.142093] page_table_check_set+0x28c/0x2a8 (P)
[ 21.142265] __page_table_check_ptes_set+0x144/0x1e8
[ 21.142441] __set_ptes_anysz.constprop.0+0x160/0x1a8
[ 21.142766] contpte_set_ptes+0xe8/0x140
[ 21.142907] try_to_unmap_one+0x10c4/0x10d0
[ 21.143177] rmap_walk_anon+0x100/0x250
[ 21.143315] try_to_unmap+0xa0/0xc8
[ 21.143441] shrink_folio_list+0x59c/0x18a8
[ 21.143759] shrink_lruvec+0x664/0xbf0
[ 21.144043] shrink_node+0x218/0x878
[ 21.144285] __node_reclaim.constprop.0+0x98/0x338
[ 21.144763] user_proactive_reclaim+0x2a4/0x340
[ 21.145056] reclaim_store+0x3c/0x60
[ 21.145216] dev_attr_store+0x20/0x40
[ 21.145585] sysfs_kf_write+0x84/0xa8
[ 21.145835] kernfs_fop_write_iter+0x130/0x1c8
[ 21.145994] vfs_write+0x2b8/0x368
[ 21.146119] ksys_write+0x70/0x110
[ 21.146240] __arm64_sys_write+0x24/0x38
[ 21.146380] invoke_syscall+0x50/0x120
[ 21.146513] el0_svc_common.constprop.0+0x48/0xf8
[ 21.146679] do_el0_svc+0x28/0x40
[ 21.146798] el0_svc+0x34/0x110
[ 21.146926] el0t
---truncated--- |
| Piwigo is an open source photo gallery application for the web. Prior to version 16.3.0, a SQL Injection vulnerability exists in the pwg.users.getList Web Service API method. The filter parameter is directly concatenated into a SQL query without proper sanitization, allowing authenticated administrators to execute arbitrary SQL commands. This issue has been patched in version 16.3.0. |
