| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability with the Ethernet VPN (EVPN) Layer 2 ingress packet processing of Cisco Nexus 3600 Platform Switches and Cisco Nexus 9500-R Series Switching Platforms could allow an unauthenticated, adjacent attacker to trigger a Layer 2 traffic loop.
This vulnerability is due to a logic error when processing a crafted Layer 2 ingress frame. An attacker could exploit this vulnerability by sending a stream of crafted Ethernet frames through the targeted device. A successful exploit could allow the attacker to cause a Layer 2 Virtual eXtensible LAN (VxLAN) traffic loop, which, in turn, could result in a denial of service (DoS) condition. This Layer 2 loop could oversubscribe the bandwidth on network interfaces, which would result in all data plane traffic being dropped. To exploit this vulnerability, the attacker must be Layer 2-adjacent to the affected device.
Note: To stop active exploitation of this vulnerability, manual intervention is required to both stop the crafted traffic and flap all involved network interfaces. For additional assistance if a Layer 2 loop that is related to this vulnerability is suspected, contact the Cisco Technical Assistance Center (TAC) or the proper support provider. |
| The Go MCP SDK used Go's standard encoding/json.Unmarshal for JSON-RPC and MCP protocol message parsing in versions prior to 1.3.1. Go's standard library performs case-insensitive matching of JSON keys to struct field tags — a field tagged json:"method" would also match "Method", "METHOD", etc. This violated the JSON-RPC 2.0 specification, which defines exact field names. A malicious MCP peer may have been able to send protocol messages with non-standard field casing that the SDK would silently accept. This had the potential for bypassing intermediary inspection and coss-implementation inconsistency. Go's standard JSON unmarshaling was replaced with a case-sensitive decoder in commit 7b8d81c. Users are advised to update to v1.3.1 to resolve this issue. |
| BigBlueButton is an open-source virtual classroom. In versions on the 3.x branch prior to 3.0.20, the string received with errorRedirectUrl lacks validation, using it directly in the respondWithRedirect function leads to an Open Redirect vulnerability. BigBlueButton 3.0.20 patches the issue. No known workarounds are available. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, additional exploits in the expression evaluation of n8n have been identified and patched following CVE-2025-68613. An authenticated user with permission to create or modify workflows could abuse crafted expressions in workflow parameters to trigger unintended system command execution on the host running n8n. The issues have been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate all known vulnerabilities. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or deploy n8n in a hardened environment with restricted operating system privileges and network access to reduce the impact of potential exploitation. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| ZITADEL is an open source identity management platform. Zitadel Action V2 (introduced as early preview in 2.59.0, beta in 3.0.0 and GA in 4.0.0) is a webhook based approach to allow developers act on API request to Zitadel and customize flows such the issue of a token. Zitadel's Action target URLs can point to local hosts, potentially allowing adversaries to gather internal network information and connect to internal services. When the URL points to a local host / IP address, an adversary might gather information about the internal network structure, the services exposed on internal hosts etc. This is sometimes called a Server-Side Request Forgery (SSRF). Zitadel Actions expect responses according to specific schemas, which reduces the threat vector. The patch in version 4.11.1 resolves the issue by checking the target URL against a denylist. By default localhost, resp. loopback IPs are denied. Note that this fix was only released on v4.x. Due to the stage (preview / beta) in which the functionality was in v2.x and v3.x, the changes that have been applied to it since then and the severity, respectively the actual thread vector, a backport to the corresponding versions was not feasible. Please check the workaround section for alternative solutions if an upgrade to v4.x is not possible. If an upgrade is not possible, prevent actions from using unintended endpoints by setting network policies or firewall rules in one's own infrastructure. Note that this is outside of the functionality provided by Zitadel. |
| The WP Responsive Images plugin for WordPress is vulnerable to Path Traversal in all versions up to, and including, 1.0 via the 'src' parameter. This makes it possible for unauthenticated attackers to read the contents of arbitrary files on the server, which can contain sensitive information. |
| The Worry Proof Backup plugin for WordPress is vulnerable to Path Traversal in all versions up to, and including, 0.2.4 via the backup upload functionality. This makes it possible for authenticated attackers, with Subscriber-level access and above, to upload a malicious ZIP archive with path traversal sequences to write arbitrary files anywhere on the server, including executable PHP files. This can lead to remote code execution. |
| SIMPLE.ERP is vulnerable to the SQL Injection in search functionality in "Obroty na kontach" window. Lack of input validation allows an authenticated attacker to prepare a malicious query to the database that will be executed.
This issue was fixed in 6.30@A04.4_u06. |
| A vulnerability in the CLI and web-based management interface of Cisco UCS Manager Software could allow an authenticated, remote attacker with valid administrative privileges to execute arbitrary commands on the underlying operating system of an affected device.
This vulnerability is due to insufficient input validation of command arguments that are supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system of an affected device with root-level privileges. |
| The User Registration & Membership plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 5.1.2. This is due to incorrect authentication in the 'register_member' function. This makes it possible for unauthenticated attackers to log in a newly registered user on the site who has the 'urm_user_just_created' user meta set. |
| Some HTTP security headers are not properly set by the web server when sending responses to the client application. |
| An XSS vulnerability affects the OAuth web services used by the WebVue, WebScheduler, TouchVue and SnapVue features of PcVue in version 12.0.0 through 16.3.3 included. It might allow a remote attacker to trick a legitimate user into loading content from another site upon unsuccessful user authentication on an unknown application (unknown client_id).
This vulnerability only affects the error page of the OAuth server. |
| The OAuth grant type Resource Owner Password Credentials (ROPC) flow is still used by the werbservices used by the WebVue, WebScheduler, TouchVue and Snapvue features of PcVue in version 12.0.0 through 16.3.3 included despite being deprecated. It might allow a remote attacker to steal user credentials. |
| NetExec is a network execution tool. Prior to version 1.5.1, the module spider_plus improperly creates the output file and folder path when saving files from SMB shares. It does not take into account that it is possible for Linux SMB shares to have path traversal characters such as `../` in them. An attacker can craft a filename in an SMB share that includes these characters, which when spider_plus crawls and downloads, can write or overwrite arbitrary files. The issue is patched in v1.5.1. As a workaround, do not run spider_plus with DOWNLOAD=true against targets. |
| ZITADEL is an open source identity management platform. Prior to versions 4.11.1 and 3.4.7, a vulnerability in Zitadel's self-management capability allowed users to mark their email and phone as verified without going through an actual verification process. The patch in versions 4.11.1 and 3.4.7 resolves the issue by requiring the correct permission in case the verification flag is provided and only allows self-management of the email address and/or phone number itself. If an upgrade is not possible, an action (v2) could be used to prevent setting the verification flag on the own user. |
| ZITADEL is an open source identity management platform. Starting in version 2.31.0 and prior to versions 3.4.7 and 4.11.0, opaque OIDC access tokens in the v2 format truncated to 80 characters are still considered valid. Zitadel uses a symmetric AES encryption for opaque tokens. The cleartext payload is a concatenation of a couple of identifiers, such as a token ID and user ID. Internally Zitadel has 2 different versions of token payloads. v1 tokens are no longer created, but are still verified as to not invalidate existing session after upgrade. The cleartext payload has a format of `<token_id>:<user_id>`. v2 tokens distinguished further where the `token_id` is of the format `v2_<oidc_session_id>-at_<access_token_id>`. V1 token authZ/N session data is retrieved from the database using the (simple) `token_id` value and `user_id` value. The `user_id` (called `subject` in some parts of our code) was used as being the trusted user ID. V2 token authZ/N session data is retrieved from the database using the `oidc_session_id` and `access_token_id` and in this case the `user_id` from the token is ignored and taken from the session data in the database. By truncating the token to 80 chars, the user_id is now missing from the cleartext of the v2 token. The back-end still accepts this for above reasons. This issue is not considered exploitable, but may look awkward when reproduced. The patch in versions 4.11.0 and 3.4.7 resolves the issue by verifying the `user_id` from the token against the session data from the database. No known workarounds are available. |
| Improper Resource Shutdown or Release vulnerability in KrakenD, SLU KrakenD-CE (CircuitBreaker modules), KrakenD, SLU KrakenD-EE (CircuitBreaker modules). This issue affects KrakenD-CE: before 2.13.1; KrakenD-EE: before 2.12.5. |
| A flaw has been found in Chia Blockchain 2.1.0. The affected element is the function send_transaction/get_private_key of the component RPC Server Master Passphrase Handler. This manipulation causes missing authentication. The attack can only be executed locally. The attack's complexity is rated as high. The exploitability is described as difficult. The exploit has been published and may be used. The vendor was informed early via email. A separate report via bugbounty was rejected with the reason "This is by design. The user is responsible for host security". |
| The User Registration & Membership – Custom Registration Form, Login Form, and User Profile plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 5.1.2 via the 'register_member' function, due to missing validation on the 'member_id' user controlled key. This makes it possible for unauthenticated attackers to delete arbitrary user accounts that newly registered on the site who has the 'urm_user_just_created' user meta set. |
| The Livemesh Addons for Beaver Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the `[labb_pricing_item]` shortcode's `title` and `value` attributes in all versions up to, and including, 3.9.2 due to insufficient input sanitization and output escaping. Specifically, the plugin uses `htmlspecialchars_decode()` after `wp_kses_post()`, which decodes HTML entities back into executable code after sanitization has occurred. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
