| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ism: Fix UAF of sba and ieq during ism_dev_exit()
A ism interrupt handler can be active in parallel with ism_dev_exit(),
accessing freed data structures.
No new interrupts will be generated after unregister_ieq(). Drain ongoing
interrupt handlers by free_irq(), before freeing ism data structures. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-scsi: reject feature changes after endpoint
vhost_scsi_setup_vq_cmds() runs from VHOST_SCSI_SET_ENDPOINT and allocates
each command's protection scatterlist array (prot_sgl) according to the
acknowledged VIRTIO_SCSI_F_T10_PI bit. The command pools are not rebuilt
when VHOST_SET_FEATURES changes that bit later.
Although virtio feature bits must not change after feature negotiation,
vhost_scsi_set_features() currently accepts such a request after the
endpoint is active and updates acked_features. Enabling T10-PI after
endpoint setup therefore leaves prot_sgl NULL while the I/O path follows
the new feature bit.
For a 129-page protection payload, vhost_scsi_mapal() passes the missing
first chunk to sg_alloc_table_chained():
sg_alloc_table_chained(table, 129, first_chunk=NULL,
nents_first_chunk=inline_sg_cnt)
sg_pool_index() then hits:
BUG_ON(nents > SG_CHUNK_SIZE); /* 129 > 128 */
The kernel reported the following call trace and register state:
Call Trace:
<TASK>
? __sg_alloc_table+0x1d8/0x250
? __pfx_vhost_run_work_list+0x10/0x10 [vhost]
sg_alloc_table_chained+0x59/0xf0
? __pfx_sg_pool_alloc+0x10/0x10
? vhost_scsi_calc_sgls.constprop.0+0x43/0x60 [vhost_scsi]
vhost_scsi_handle_vq+0xf02/0x1700 [vhost_scsi]
? __pfx_vhost_scsi_handle_vq+0x10/0x10 [vhost_scsi]
vhost_scsi_handle_kick+0x37/0x50 [vhost_scsi]
vhost_run_work_list+0x8e/0xd0 [vhost]
vhost_task_fn+0xe1/0x210
ret_from_fork+0x348/0x540
</TASK>
RIP: 0010:0x4
CR2 = 0x4
RSP: 0018:ffffc90000dbf940 EFLAGS: 00010202
RAX: ffffffff82396810 RBX: ffff88811dc28b80 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000081
VHOST_F_LOG_ALL is a vhost-specific runtime feature and remains the only
exception.
Reject changes to any feature other than VHOST_F_LOG_ALL while the
endpoint is active. This preserves the existing runtime log toggle while
preventing feature-dependent command resources and data-path state from
becoming inconsistent. Userspace must clear the endpoint before changing
any other negotiated feature and set the endpoint up again afterward. |
| The CM Map Locations – Visualize and share your locations in a few clicks plugin for WordPress is vulnerable to Limited Arbitrary File Upload in all versions up to, and including, 2.1.8 via the uploadMedia function. This is due to insufficient file type validation in the upload handler, which performs incomplete extension filtering without MIME-type checks or upload capability verification before passing attacker-supplied files to move_uploaded_file(). This makes it possible for authenticated attackers, with subscriber-level access and above, to upload files that may be executable, which makes remote code execution possible. The required nonce is exposed to any logged-in Subscriber via the CMLOC_Editor_Images JavaScript object on the front-end location editor page. |
| A flaw was found in glibc. The strfmon and strfmon_l functions are vulnerable to a buffer overflow when processing right-justified width padding. This occurs because an incorrect length is used for an internal memory operation, causing data to be written beyond its intended buffer. An attacker could exploit this by providing specially crafted input, potentially leading to arbitrary code execution or other severe impacts. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: clear skb2->cb[] in ip6ip6_err()
ip6ip6_err() clones an outer IPv6 ICMP error skb, pulls it to the
quoted inner IPv6 packet, and then passes the clone to icmpv6_send().
The clone still carries the outer packet's inet6_skb_parm in skb->cb.
If the outer packet had a Home Address Option, IP6CB(skb2)->dsthao
remains non-zero after skb_pull(). icmpv6_send() later calls
mip6_addr_swap(), which uses that stale dsthao offset against the quoted
inner packet. A malformed inner destination-options header can then make
the HAO lookup and address swap run past the end of the quoted packet
and corrupt skb_shared_info.
Clear skb2->cb[] before pulling the quoted inner IPv6 packet so the
reply path does not reuse metadata left by the outer IPv6 stack. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: bound the hwdep mmap fault offset
snd_us428ctls_vm_fault() turns the faulting page offset into a kernel
address with no bound of any kind:
offset = vmf->pgoff << PAGE_SHIFT;
vaddr = (char *)(...)->us428ctls_sharedmem + offset;
page = virt_to_page(vaddr);
get_page(page);
vmf->page = page;
return 0;
snd_us428ctls_mmap() checks only the length of the mapping, never the
offset, and us428ctls_sharedmem is a single page from
alloc_pages_exact(). For a character device file_mmap_size_max()
returns ULONG_MAX, so the mm layer imposes no ceiling either. Every page
offset above zero resolves to a struct page outside the object, and the
handler installs it into the caller's address space read-write; the vma
is not marked read-only.
The caller picks the page frame with a single mmap() argument and gets
read-write access to a page of kernel memory it does not own; an offset
that lands in an unpopulated vmemmap region oopses instead.
A process that can open the hwdep node of an attached US-X2Y reaches
this after loading the FPGA image through the same node; no capability
check is involved.
On 7.2.0-rc5 (arm64), mmap() with a large offset:
Unable to handle kernel paging request at virtual address fffffdffc45d5ac8
pc : snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y]
Call trace:
snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y]
__do_fault
__handle_mm_fault
handle_mm_fault
el0_da
Reject any offset outside the shared region. The pcm hwdep handler in
usx2yhwdeppcm.c computes its address the same way and needs the same
bound.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB read in rtw_get_wpa_ie()
rtw_get_wpa_ie() reads bytes at fixed offsets into a vendor-specific
information element without checking that the element is long enough,
causing an out-of-bounds read for a short trailing IE.
The function locates a vendor-specific IE (EID 221) with rtw_get_ie()
and then compares a 4-byte OUI+type at pbuf + 2 and reads a 2-byte
version word at pbuf + 6. Those accesses require the IE body to be at
least 6 bytes, but rtw_get_ie() only guarantees that the element fits
within the buffer; it does not enforce a minimum body length. A
vendor-specific IE whose length byte is 0 to 5, placed at the end of
the buffer, therefore makes these reads run past the end of the IE and
past the end of the buffer itself.
The buffer holds information elements taken from received management
frames and from the IE blob passed to rtw_cfg80211_set_wpa_ie(), which
is kmemdup'd to its exact length, so the read can run off the end of
the allocation.
The sibling helpers rtw_get_sec_ie(), rtw_get_wapi_ie() and
rtw_get_wps_ie() in this file already reject too-short vendor-specific
IEs before their OUI memcmp(); rtw_get_wpa_ie() was never brought in
line with them, and needs a minimum of 6 rather than 4 bytes because
of the version word. Add the missing length check. |
| SKYSEA Client View and SKYMEC IT Manager contain a path traversal vulnerability. If this vulnerability is exploited, an attacker who can log in to a Windows system on which the affected product is installed may be able to execute arbitrary code on another Windows system that has the affected products installed and can receive UDP packets from that system. Note that this vulnerability is due to an incomplete fix for CVE-2024-41726. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: fix sk_buff leak when the header checks reject a packet
tcf_ct_handle_fragments() runs its header sanity checks before handing
anything to the defragmentation engine:
if (family == NFPROTO_IPV4)
err = tcf_ct_ipv4_is_fragment(skb, &frag);
else
err = tcf_ct_ipv6_is_fragment(skb, &frag);
if (err || !frag)
return err;
tcf_ct_ipv4_is_fragment() returns -EINVAL or -ENOMEM;
tcf_ct_ipv6_is_fragment() adds -EPROTO when ipv6_find_hdr() fails. None of
them frees or queues the skb, so on that path the caller still owns it.
tcf_ct_act() however funnels every non-zero return into the
ownership-transfer exit:
err = tcf_ct_handle_fragments(net, skb, family, p->zone, &defrag);
if (err)
goto out_frag;
...
out_frag:
if (err != -EINPROGRESS)
tcf_action_inc_drop_qstats(&c->common);
return TC_ACT_CONSUMED;
TC_ACT_CONSUMED means the action took ownership of the skb, so no caller
frees it - sch_handle_ingress(), sch_handle_egress() and
tcf_qevent_handle() all deliberately skip the free for that verdict. The
skb is therefore orphaned: one sk_buff plus its data buffer is leaked per
malformed packet, unbounded. Note the drop counter is already incremented
for these errors, so the statistics claim a drop that never happens.
Three different ownership states reach out_frag: today - the skb may be
queued by the defrag engine (-EINPROGRESS), already freed by
nf_ct_handle_fragments(), or still owned by us. Tell the caller which of
those it is, and free the packet ourselves in the last case, which
restores the TC_ACT_SHOT behaviour that predated the Fixes: commit.
Reproduced on v7.2-rc6 with a 54-byte frame carrying a 40-byte IPv6
header with nexthdr = 0 (hop-by-hop) and nothing after it, on a
clsact ingress chain with "action ct". kmemleak reports one leaked
232-byte skbuff_head_cache object plus its 704-byte data buffer per
packet; with this patch it reports none. |
| A flaw was found in glibc. An out-of-bounds array write vulnerability exists within the `tdelete` function. This issue occurs due to incorrect management of array sizes, which can lead to memory corruption. A local attacker with low privileges could potentially exploit this to cause a denial of service or disclose sensitive information. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: do not arm the ageing timer on a device that is down
vxlan_changelink() arms vxlan->age_timer whenever the requested ageing
interval differs from the configured one:
if (conf.age_interval != vxlan->cfg.age_interval)
mod_timer(&vxlan->age_timer, jiffies);
There is no netif_running() test, so the timer is armed even on a device
that was never brought up. The only synchronous cancel in the driver is
the timer_delete_sync() in vxlan_stop(), which is .ndo_stop.
netif_close_many() drops devices without IFF_UP before
__dev_close_many() runs, so that cancel is skipped for such a device.
vxlan_setup() sets dev->needs_free_netdev = true and age_timer is a
member of struct vxlan_dev, so free_netdev() releases the allocation the
timer lives in while it is still queued on a timer_base.
expire_timers() unlinks the entry before it loads timer->function, so
the timer core writes through the freed object's list pointers:
BUG: KASAN: slab-use-after-free in __run_timers+0x208/0x654
Write of size 8 at addr ffff00001adace68 by task true/192
__asan_store8+0x84/0xac
__run_timers+0x208/0x654
run_timer_softirq+0x154/0x18c
Allocated by task 189:
alloc_netdev_mqs+0x64/0x720
rtnl_create_link+0x4ac/0x520
rtnl_newlink+0x758/0xd00
Freed by task 191:
netdev_release+0x40/0x58
netdev_run_todo+0x4a4/0x8c0
rtnl_dellink+0x200/0x4e8
The rtnl operations involved are netns-scoped, so an unprivileged user
can perform them in a new user and network namespace.
Arming the timer on a down device never had an effect: vxlan_cleanup()
returns early on !netif_running(), and vxlan_open() arms the timer for
any non-zero interval once the device is brought up. Add the missing
test.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: ocp: Fix board ID over-read
The EEPROM board ID is a fixed 13-byte field and is not guaranteed to
contain a NUL terminator. Passing it directly to
devlink_info_version_fixed_put() treats it as a C string and may read
beyond the field.
Format at most OCP_BOARD_ID_LEN bytes into the existing local buffer
before reporting the ID. Use a precision limit because the snprintf()
output size alone does not bound the source string scan. |
| Adminer versions before 5.4.3 contain an unrestricted file upload vulnerability in the AdminerFileUpload plugin that allows authenticated users to upload PHP files by exploiting a permissive default extension allowlist. Attackers can upload PHP webshells to columns ending in _path and execute arbitrary code as the web-server user when uploadPath is web-served. |
| In the Linux kernel, the following vulnerability has been resolved:
vt: add permission check for KDSKBMETA ioctl
KDSKBMETA modifies keyboard meta mode but lacks the !perm check that all
other keyboard setter ioctls in vt_k_ioctl() enforce, allowing a process
to change meta mode on a non-controlling console without authorization. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Pin the 'struct nfs_server' during a FREE_STATEID call
Dan Aloni reports that he was able to hit a use-after-free bug if a
FREE_STATEID operation gets delayed for whatever reason. Fix this by
bumping the refcount of the 'struct nfs_server' object for the duration
of the FREE_STATEID so it doesn't get cleaned up from underneath us
while operations are still in flight. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: fw_tracer, return NULL on create error
Tracer creation can fail by returning either NULL or ERR_PTR.
The return value is stored without a check on the device, and users
treat ERR_PTR and NULL the same way.
This also causes a crash in the core dump logic, which is missing the
ERR_PTR check and ends up dereferencing it, as shown in the trace below.
Switch tracer creation to return NULL on failure only, so callers only
need a single NULL check.
Internal error: Oops: 0000000096000006 [#1] SMP
Modules linked in: mlx5_ib ib_uverbs ib_core ipv6 mlx5_core
CPU: 1 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.19.7 #1 PREEMPT(none)
Workqueue: mlx5_health0001:01:00.0 mlx5_fw_reporter_err_work [mlx5_core]
pstate: a3400009 (NzCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : mlx5_fw_tracer_trigger_core_dump_general+0x58/0xe0 [mlx5_core]
lr : mlx5_fw_tracer_trigger_core_dump_general+0x40/0xe0 [mlx5_core]
sp : ffff800081cf3c40
x29: ffff800081cf3c90 x28: 0000000000000000 x27: 0000000000000000
x26: ffff000080018828 x25: 0000000000000000 x24: ffff000080304a05
x23: ffff800081cf3d80 x22: ffff0000847e01a0 x21: 0000000000000000
x20: ffff0000847e01a0 x19: ffffffffffffffa1 x18: ffff80008310bbf0
x17: ffff800080119650 x16: ffff80008010df54 x15: ffff80008010d4ac
x14: ffff800079c202e4 x13: ffff80008002fe60 x12: ffff800080119650
x11: ffff80008010df54 x10: ffff80008010d4ac x9 : ffff800079c203d8
x8 : ffff800081cf3c88 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000008 x3 : 0000000000000030
x2 : 0000000000000008 x1 : 0000000000000000 x0 : 00000000c5c4000e
Call trace:
mlx5_fw_tracer_trigger_core_dump_general+0x58/0xe0 [mlx5_core] (P)
mlx5_fw_reporter_dump+0x30/0x2e0 [mlx5_core]
devlink_health_do_dump+0x9c/0x160
devlink_health_report+0x1c0/0x288
mlx5_fw_reporter_err_work+0xac/0xc0 [mlx5_core]
process_one_work+0x15c/0x3d8
worker_thread+0x18c/0x320
kthread+0x148/0x228
ret_from_fork+0x10/0x20
Code: b9400000 5ac00800 7a401800 540003ca (3940a260)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x000000,00078031,75fce5a1,35fffe67
Memory Limit: none
---[ end Kernel panic - not syncing: Oops: Fatal exception ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: tcp: Fix use-after-free in bpf_iter_tcp_established_batch()
reqsk_queue_hash_req() publishes a TCP_NEW_SYN_RECV request_sock onto
the ehash chain, drops the bucket lock, and only afterwards sets
rsk_refcnt to 3.
Lockless readers such as __inet_lookup_established() handle this with
refcount_inc_not_zero(), but bpf_iter_tcp_established_batch() uses plain
sock_hold() while holding the bucket lock, on the assumption that the
lock guarantees sk_refcnt > 0. That assumption does not hold for
request_sock:
CPU 0 CPU 1
----- -----
tcp_conn_request()
reqsk_queue_hash_req()
inet_ehash_insert(req)
spin_lock(bucket)
__sk_nulls_add_node_rcu(req) // rsk_refcnt == 0
spin_unlock(bucket)
bpf_iter_tcp_established_batch()
spin_lock(bucket)
sock_hold(req) <-- addition on 0
spin_unlock(bucket)
refcount_set(&req->rsk_refcnt, 3) // clobbers saturated value
which surfaces as:
refcount_t: addition on 0; use-after-free.
WARNING: lib/refcount.c:25 at refcount_warn_saturate+0x48/0x90, CPU#1
Call Trace:
bpf_iter_tcp_established_batch+0x14e/0x170
bpf_iter_tcp_batch+0x53/0x200
bpf_iter_tcp_seq_next+0x27/0x70
bpf_seq_read+0x107/0x410
vfs_read+0xb9/0x380
The iterator's stolen reference is lost when the publishing CPU's
refcount_set() overwrites the count, leaving the socket one reference
short. When the last legitimate owner drops its reference the reqsk is
freed while still reachable, leading to use-after-free.
This reproduces in seconds with tcp_syncookies=0, a handful of threads
doing connect()/close() to a local listener while others read an
iter/tcp link in a tight loop.
Use refcount_inc_not_zero() and skip the socket on failure. A skipped
socket is still part of the bucket, so keep counting it in expected.
The reallocations are sized from expected, and a request sock whose
refcount gets published while the lock is held across the last realloc
must already have room.
A skipped socket is counted in expected but never batched, so end_sk
can be short of expected on a batch that is actually complete. Decide
completeness by whether the walk left any socket behind instead. The
WARN after the locked realloc checks the same, replacing an
end_sk == expected check that could not hold on that path since
commit cdec67a489d4 ("bpf: tcp: Make sure iter->batch always
contains a full bucket snapshot").
If every matching socket in a bucket is mid-init (refcount 0), end_sk
stays 0. Advance to the next bucket rather than returning a batch entry
that was never filled this round. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/mlx5: Fix buffer length in create_direct_keys()
We have seen in our CI the following KASAN message:
BUG: KASAN: slab-out-of-bounds in cmd_exec+0x550/0xca0 [mlx5_core]
Read of size 272 at addr 0000000176795020 by task qemu-system-s39/82764
[...]
[<000011388ab3a7a0>] cmd_exec+0x550/0xca0 [mlx5_core]
[<000011388ab3b61c>] mlx5_cmd_exec_cb+0x25c/0x4f0 [mlx5_core]
[<000011388b21e82e>] mlx5_vdpa_exec_async_cmds+0x22e/0x5e0 [mlx5_vdpa]
[<000011388b21fd44>] create_direct_keys+0x954/0xef0 [mlx5_vdpa]
[...]
The buggy address is located 4128 bytes inside of
allocated 4384-byte region [0000000176794000, 0000000176795120)
So in essence we read 16 bytes beyond 4384-byte allocation.
create_direct_keys calculates the pointer and length for in and out
buffers.
The size calculation for in includes the entire structure
size (out + in + mtt[]) but the pointer passed to cmd_exec points only
to the 'in' field, skipping the 'out' field.
This causes mlx5_copy_to_msg() to read beyond the allocated buffer
by sizeof(out) bytes when copying command data.
Properly calculate the input size to match the pointer and allocation size. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: Always acquire rtnl_lock when destroying locked classifiers
Another challenge with unlocked filters.
There is a short window in tc_new_tfilter where a tcf_proto can be found
and briefly referenced by a totally unrelated, unlocked classifier's request
and cause a race.
Feng created a poc which created this race with two threads, one creating a
u32 filter and other a flower filter in the same chain/prio:
1. Both threads enter tc_new_tfilter, both find the chain empty, both
drop filter_chain_lock
2. u32 finishes tcf_proto_create("u32") first, calls
tcf_chain_tp_insert_unique() -> inserts u32_tp into the chain
3. flower finishes tcf_proto_create("flower") later, calls
tcf_chain_tp_insert_unique() -> tcf_chain_tp_find() now sees u32_tp
already there, takes a reference on it, destroys flower's own tp_new
and returns u32_tp to the caller.
Flower then hits the kind mismatch check (because it requested for kind
"flower" but tp->ops->kind is "u32") and goes through the errout path
which calls tcf_proto_put() on u32_tp. If the u32 thread has already
gone through its own errout (its change() call failed on the PoC's empty
options) and dropped its create and insert refs, flower's put is the
last one and drops u32_tp's refcnt to zero.
At this point tp->ops->destroy() runs in a context that never took
rtnl_lock. When that happens, it might cause a UAF like the following
(illustrated by the PoC):
[ +0.000710] BUG: KASAN: slab-use-after-free in u32_init (net/sched/cls_u32.c:393)
[ +0.000281] Read of size 8 at addr ffff888120022f00 by task poc_feng_xue/524
Call Trace:
u32_init (net/sched/cls_u32.c:393)
tc_new_tfilter (net/sched/cls_api.c:2378)
Allocated by task 526:
u32_init (net/sched/cls_u32.c:378)
tc_new_tfilter (net/sched/cls_api.c:2378)
Freed by task 522:
kfree
u32_destroy (net/sched/cls_u32.c:662)
tcf_proto_destroy (net/sched/cls_api.c:446)
tcf_proto_put (net/sched/cls_api.c:459)
tc_new_tfilter (net/sched/cls_api.c:2459)
Fix this by having tcf_proto_destroy() take rtnl_lock around
tp->ops->destroy() for locked classifiers whenever rtnl is not held.
To explain why I used a temp variable "not_lockless" I'd like to point to a
semi-related note on rtnl_held vs TCF_PROTO_OPS_DOIT_UNLOCKED (adding here
for future cleanup if deemed necessary):
The rtnl_held parameter and the TCF_PROTO_OPS_DOIT_UNLOCKED flag are
redundant sources of truth for whether rtnl_lock is held. Among the nine
classifier destroy(..rtnl_held..) callbacks, only flower consults the
rtnl_held parameter which it propagates to tc_setup_cb_destroy()
and tc_setup_cb_call(). The other eight (u32, flow, bpf, cgroup, route, basic,
fw, mall) ignore it entirely;-> those that call tc_setup_cb_destroy()
(u32, bpf, mall) hardcode true always instead of forwarding the parameter.
A future cleanup should remove the rtnl_held parameter from the destroy callback
signature entirely and have callers rely solely on their knowledge whether
they are running in an unlocked context. |
