| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Snipe-IT is an IT asset/license management system. Prior to 8.6.3, a restricted user can request /api/v1/users/{target_id}/eulas to obtain another user's randomized EULA filename and then download the signed file through /account/stored-eula-file/{filename}. The primary /stored-eula-file/{filename} route correctly denies access, but app/Http/Controllers/ProfileController.php and app/Http/Controllers/Api/UsersController.php do not consistently enforce ownership and target-user authorization. This issue is fixed in version 8.6.3. |
| Unauthenticated Insecure Direct Object References (IDOR) in Review Schema <= 3.1.0 versions. |
| Multiple BinSoft products are vulnerable to Remote Command Execution. An authorized user with access to the application and direct access to the backend database can achieve system command execution by uploading an attachment and modifying its storage path in the database to reference an attacker-controlled remote network resource. Alternatively, it is possible to use a previously uploaded file and change its reference. When the application processes the attachment, and a user tries to open it, the referenced resource is executed by the system.
Critically, this vulnerability can be exploited by any unauthenticated attacker by chaining it with CVE-2026-40550 and CVE-2026-40551, which allows obtaining database access, and logging onto any account.
The described issue affects all published versions. The vendor stated that this issue is a direct result of the architecture model in which the software is distributed, and that it will be mitigated with a corrected installation manual. |
| Multiple BinSoft products perform client-side authentication. An attacker with access to any application instance connected to the backend server can bypass the login verification process by manipulating the application binary and authenticate as an arbitrary user.
The described issue affects all published versions. The vendor stated that this issue is a direct result of the architecture model in which the software is distributed, and that it will be mitigated with a corrected installation manual. |
| Joomla Extension - svenbluege.de - Reflected XSS and open redirect in Event Gallery extension < 6.5.0 - The “return” parameter is base64-decoded and written to the “Back” link without being validated. |
| GestSup versions before 3.2.62 fail to validate ticket ownership when loading comments via the threadedit parameter in thread.php. Authenticated attackers can enumerate sequential comment IDs to read private comments from other users' tickets without proper authorization checks. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject non-scalar bpf_loop iteration counts
bpf_loop() declares its nr_loops argument as ARG_ANYTHING. Privileged
programs may pass pointer values to such arguments, so check_func_arg()
lets a pointer-valued R1 reach the helper-specific checks.
Since commit bb124da69c47 ("bpf: keep track of max number of bpf_loop
callback iterations"), the verifier marks R1 precise and reads its upper
bound to limit callback simulation. Precision backtracking only accepts
scalar registers, so passing a pointer instead triggers the "backtracking
misuse" verifier warning. Kernels with panic_on_warn enabled subsequently
panic.
Introduce ARG_SCALAR for helper arguments that only accept scalar values
and use it for bpf_loop() nr_loops. Generic helper argument validation then
rejects pointers before loop inlining and precision processing. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sfq: clamp quantum in change path
sfq_change() accepts any non-negative quantum (only rejects
(int)ctl->quantum < 0). With a crafted size table qdisc_pkt_len reaches
~2 GiB, so quantum=1 makes the deficit-refill loop spin ~2^31 times
under the qdisc lock (a soft lockup / denial of service).
Add max(256U, ...) matching fq_codel_change(). Reject quantum > 1<<20
with -EINVAL, matching fq_codel_change() and the init clamp.
Conditions to recreate the bug:
CONFIG_NET_SCH_SFQ=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root sfq
tc qdisc change dev dummy0 root sfq quantum 1 stab data 32768 size_log 15 cell_log 0 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fq_pie: clamp quantum in change path
fq_pie_change() accepts any quantum value from userspace, including 1.
With a crafted size table qdisc_pkt_len reaches ~2 GiB, so quantum=1
makes the deficit-refill loop spin ~2^31 times under the qdisc lock
(a soft lockup / denial of service).
Add max(256U, ...) matching fq_codel_change().
Conditions to recreate the bug:
CONFIG_NET_SCH_FQ_PIE=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root fq_pie
tc qdisc change dev dummy0 root fq_pie quantum 1 stab data 32768 size_log 15 cell_log 0 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: zero extend the result of an arena 32-bit cmpxchg
bpf_convert_ctx_accesses() rewrites an atomic on an arena pointer from
BPF_STX | BPF_ATOMIC to BPF_STX | BPF_PROBE_ATOMIC, and it runs before
bpf_opt_subreg_zext_lo32_rnd_hi32().
That pass emits an explicit zero extension for a 32-bit cmpxchg even
when bpf_jit_needs_zext() is false. This is done because on some
architectures 32-bit cmpxchg requires explicit zero extension for the
dst register. E.g. on x86-64 'lock cmpxchg' does not change the %eax
if comparison is successful, while BPF semantics declare that each
operation on a 32-bit register zero extends it's upper half.
is_cmpxchg_insn() matches BPF_MODE == BPF_ATOMIC only, so an arena
cmpxchg misses said zero extension adjustment. This patch adjusts
is_cmpxchg_insn() to match BPF_PROBE_ATOMIC alongside BPF_ATOMIC. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject tail calls directly from callback frames
A tail call from a non-zero frame is modeled as a return from that frame.
The verifier makes R0 unknown and calls prepare_func_exit() for the taken
branch.
When the current frame is a synchronous callback, prepare_func_exit()
enforces the callback return-value contract and marks R0 precise. Since the
tail-call path synthesized R0 rather than deriving it from an instruction,
precision backtracking reaches the callback-calling instruction with R0
still requested and triggers the "callback unexpected regs" verifier bug.
A CAP_BPF task can therefore cause a WARN and an -EFAULT BPF_PROG_LOAD.
Tail calls reachable from callbacks are already rejected later by
check_max_stack_depth(). Reject a tail call made directly by a callback
before constructing the inconsistent return state, using the existing
diagnostic. Tail calls from ordinary subprograms keep their current
behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix REG INVARIANTS VIOLATION on speculative pointer arithmetic
Take the following unprivileged program as an example:
r0 = bpf_map_lookup_elem(...) /* PTR_TO_MAP_VALUE, offset 0 */
...
14: r0 += r1 /* r1 is a bounded scalar */
15: r9 = r0
Loading it triggers a verifier warning from reg_bounds_sanity_check():
verifier bug: REG INVARIANTS VIOLATION (alu): const subreg tnum out
of sync with range bounds r64={.base=0x0, .size=0x0}
r32={.base=0x0, .size=0xffffffff} var_off=(0x0, 0x0)
What happens:
1. Processing insn 14 (r0 += r1) in adjust_ptr_min_max_vals(), the new
offset is computed into dst_reg's var_off and 32/64-bit ranges.
2. Because pointer registers do not track 32-bit subregister bounds,
__mark_reg32_unbounded() first sets r32 to the full range; r32 is
re-derived from the offset at the end of the function by
reg_bounds_sync().
3. On the unprivileged path, sanitize_ptr_alu() is called and, via
sanitize_speculative_path() -> push_stack(), snapshots the current
register state and schedules the next instruction (insn 15) to be
verified directly as a speculative path.
4. That snapshot is taken between step 2 and the final reg_bounds_sync():
at this point dst_reg's var_off still holds the (const) original
offset while r32 has just been blanked to the full range, i.e. the two
are out of sync. When the speculative path later verifies insn 15
(r9 = r0), the inconsistent state reaches reg_bounds_sanity_check() and
trips the warning.
var_off and the 32-bit range must always be consistent. There are two
ways to keep the snapshot consistent:
1. sync var_off and r32 before the snapshot so they match, or
2. leave r32 at its original (already consistent) value and blank it
only after the snapshot.
The whole point of sanitize_ptr_alu() is to insert a harmless masking
sequence that keeps the access in bounds under speculation, so the state
it snapshots should faithfully represent that. Take approach 2: move
__mark_reg32_unbounded() to after sanitize_ptr_alu(), so the speculative
snapshot keeps the pointer's original, consistent r32. The non-speculative
path is unchanged: r32 is still blanked before the offset is applied and
re-derived by reg_bounds_sync(). |
| Pexip Infinity before 40.1 is affected by improper input validation in the signaling implementation that allows a malicious attacker to trigger a software abort resulting in a denial of service. |
| Frame protocol metadissector crash in 4.6.0 to 4.6.8 and 4.4.0 to 4.4.18 allows denial of service |
| Improper rule enforcement in the PAM Active Directory provider in Devolutions Server 2026.3.5 allows a user with PAM edit permissions to bypass the Devolutions Gateway host ruleset. |
| Flame through 2.4.0 contains an insufficient session expiration vulnerability in the login endpoint that allows attackers with former admin access to obtain tokens with arbitrary lifespans by supplying unvalidated duration parameters. Attackers can mint near-permanent administrator tokens that survive password changes, retaining full control of the dashboard since tokens are verified only against a static JWT secret that is never rotated. |
| GLPI is a free asset and IT management software package. From 11.0.5 until 11.0.8, under certain conditions, permission logic can grant access to a document without confirming that the document is linked to the targeted item. A user can use an unrelated item that the user is permitted to view to read a document linked to an inaccessible item. This issue is fixed in version 11.0.8. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to 41.10.6, 42.9.2, 43.4.1, and 44.0.0-beta.5, windows opened from a sandboxed top-level document did not inherit that document's active HTML sandbox restrictions. Untrusted content in a sandboxed top-level document that was permitted to open popups could therefore create a window with the Electron application's full origin instead of the restricted origin intended by the sandbox. Applications that deny such popups with setWindowOpenHandler are not affected. This issue is fixed in versions 41.10.6, 42.9.2, 43.4.1, and 44.0.0-beta.5. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Remove conflicting altnames for dying netns in __dev_change_net_namespace().
syzbot reported the warning in cfg80211_pernet_exit(). [0]
The repro does the following:
1. create two device in root netns and non-root netns
2. assign the same altname for the two devices
3. remove the non-root netns
Since commit 7663d522099e ("net: check for altname conflicts
when changing netdev's netns"), cfg80211_switch_netns() and
cfg802154_switch_netns() fail if init_net has a device with the
conflicting altname.
default_device_exit_net() had the same issue and commit d09486a04f5d
("net: fix removing a namespace with conflicting altnames") fixed it.
cfg80211_pernet_exit() and cfg802154_pernet_exit() need the same fix.
Let's generalise the fix by removing conflicting altnames for dying
netns in __dev_change_net_namespace().
[0]:
cfg80211_switch_netns(rdev, &init_net)
WARNING: net/wireless/core.c:1871 at cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871, CPU#1: kworker/u8:9/1160
Modules linked in:
CPU: 1 UID: 0 PID: 1160 Comm: kworker/u8:9 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026
Workqueue: netns cleanup_net
RIP: 0010:cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871
Code: e8 03 42 80 3c 20 00 74 08 4c 89 f7 e8 b4 ef 0e f7 4d 8b 36 49 81 fe 20 10 4a 90 74 12 e8 03 3d 9f f6 eb 85 e8 fc 3c 9f f6 90 <0f> 0b 90 eb cc e8 f1 3c 9f f6 eb 05 e8 ea 3c 9f f6 5b 41 5c 41 5e
RSP: 0018:ffffc900057a78f0 EFLAGS: 00010293
RAX: ffffffff8b287154 RBX: ffff88807ba72780 RCX: ffff8880213e8000
RDX: 0000000000000000 RSI: 00000000ffffffef RDI: 0000000000000000
RBP: 00000000ffffffef R08: ffffffff9024cc67 R09: 0000000000000000
R10: fffff52000af4eb0 R11: fffffbfff204998d R12: dffffc0000000000
R13: ffffffff904a1080 R14: ffff888144ed0008 R15: ffff888144ed0e20
FS: 0000000000000000(0000) GS:ffff888124de6000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005642de0a8a70 CR3: 000000007a40c000 CR4: 00000000003526f0
Call Trace:
<TASK>
ops_exit_list net/core/net_namespace.c:200 [inline]
ops_undo_list+0x43d/0x8d0 net/core/net_namespace.c:253
cleanup_net+0x572/0x810 net/core/net_namespace.c:706
process_one_work kernel/workqueue.c:3387 [inline]
process_scheduled_works+0xc3d/0x1630 kernel/workqueue.c:3470
worker_thread+0xa47/0xfb0 kernel/workqueue.c:3551
kthread+0x38b/0x480 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: oa_tc6: Improve the error recovery
When oversubscribed traffic causes lot of buffer overflow errors,
probably due to loss of data chunks, driver fails to find a
data chunk with end_valid bit set, before it runs out of sk buffer
space. As a result, assert is seen during skb_put.
Now, check is made if skb buffer has enough tailroom for the
incoming data before accepting. If there is no room, current
frame is abandoned and it will start looking for a data chunk
with start_valid bit, that is a new frame.
SK buffer allocation error is considered as recoverable error.
rx_buf_overflow flag is too specific and no longer the only
condition this flag is used for. Therefore it is renamed as
wait_until_start_valid. This is more appropriate as this flag
is used to look for the next data chunk with SV bit set, after
failures like buffer overflow, buffer allocation failure, skb pointer
validity besides buffer overflow error.
Not writing to status0 if it reads 0. |
