| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: Reinit blkg_iostat_set after clearing in blkcg_reset_stats()
When blkg_alloc() is called to allocate a blkcg_gq structure
with the associated blkg_iostat_set's, there are 2 fields within
blkg_iostat_set that requires proper initialization - blkg & sync.
The former field was introduced by commit 3b8cc6298724 ("blk-cgroup:
Optimize blkcg_rstat_flush()") while the later one was introduced by
commit f73316482977 ("blk-cgroup: reimplement basic IO stats using
cgroup rstat").
Unfortunately those fields in the blkg_iostat_set's are not properly
re-initialized when they are cleared in v1's blkcg_reset_stats(). This
can lead to a kernel panic due to NULL pointer access of the blkg
pointer. The missing initialization of sync is less problematic and
can be a problem in a debug kernel due to missing lockdep initialization.
Fix these problems by re-initializing them after memory clearing. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: fix NULL dereference on q->elevator in blk_mq_elv_switch_none
After grabbing q->sysfs_lock, q->elevator may become NULL because of
elevator switch.
Fix the NULL dereference on q->elevator by checking it with lock. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null
Fixes a NULL pointer derefence bug triggered from tap driver.
When tap_get_user calls virtio_net_hdr_to_skb the skb->dev is null
(in tap.c skb->dev is set after the call to virtio_net_hdr_to_skb)
virtio_net_hdr_to_skb calls dev_parse_header_protocol which
needs skb->dev field to be valid.
The line that trigers the bug is in dev_parse_header_protocol
(dev is at offset 0x10 from skb and is stored in RAX register)
if (!dev->header_ops || !dev->header_ops->parse_protocol)
22e1: mov 0x10(%rbx),%rax
22e5: mov 0x230(%rax),%rax
Setting skb->dev before the call in tap.c fixes the issue.
BUG: kernel NULL pointer dereference, address: 0000000000000230
RIP: 0010:virtio_net_hdr_to_skb.constprop.0+0x335/0x410 [tap]
Code: c0 0f 85 b7 fd ff ff eb d4 41 39 c6 77 cf 29 c6 48 89 df 44 01 f6 e8 7a 79 83 c1 48 85 c0 0f 85 d9 fd ff ff eb b7 48 8b 43 10 <48> 8b 80 30 02 00 00 48 85 c0 74 55 48 8b 40 28 48 85 c0 74 4c 48
RSP: 0018:ffffc90005c27c38 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888298f25300 RCX: 0000000000000010
RDX: 0000000000000005 RSI: ffffc90005c27cb6 RDI: ffff888298f25300
RBP: ffffc90005c27c80 R08: 00000000ffffffea R09: 00000000000007e8
R10: ffff88858ec77458 R11: 0000000000000000 R12: 0000000000000001
R13: 0000000000000014 R14: ffffc90005c27e08 R15: ffffc90005c27cb6
FS: 0000000000000000(0000) GS:ffff88858ec40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000230 CR3: 0000000281408006 CR4: 00000000003706e0
Call Trace:
tap_get_user+0x3f1/0x540 [tap]
tap_sendmsg+0x56/0x362 [tap]
? get_tx_bufs+0xc2/0x1e0 [vhost_net]
handle_tx_copy+0x114/0x670 [vhost_net]
handle_tx+0xb0/0xe0 [vhost_net]
handle_tx_kick+0x15/0x20 [vhost_net]
vhost_worker+0x7b/0xc0 [vhost]
? vhost_vring_call_reset+0x40/0x40 [vhost]
kthread+0xfa/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: lock against ->sock changing during sysfs read
->sock can be set to NULL asynchronously unless ->recv_mutex is held.
So it is important to hold that mutex. Otherwise a sysfs read can
trigger an oops.
Commit 17f09d3f619a ("SUNRPC: Check if the xprt is connected before
handling sysfs reads") appears to attempt to fix this problem, but it
only narrows the race window. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal/int340x_thermal: handle data_vault when the value is ZERO_SIZE_PTR
In some case, the GDDV returns a package with a buffer which has
zero length. It causes that kmemdup() returns ZERO_SIZE_PTR (0x10).
Then the data_vault_read() got NULL point dereference problem when
accessing the 0x10 value in data_vault.
[ 71.024560] BUG: kernel NULL pointer dereference, address:
0000000000000010
This patch uses ZERO_OR_NULL_PTR() for checking ZERO_SIZE_PTR or
NULL value in data_vault. |
| A vulnerability has been found in Assimp up to 6.0.4. Affected by this issue is the function glTF2::LazyDict in the library glTF2Asset.h. Such manipulation of the argument operator[] leads to null pointer dereference. The attack must be carried out locally. The exploit has been disclosed to the public and may be used. The name of the patch is d24b85319bd70c65883a2b96613e07e23fb95981. It is best practice to apply a patch to resolve this issue. |
| A flaw has been found in Assimp up to 6.0.4. Affected by this vulnerability is the function Assimp::glTFImporter::ImportMeshes of the file glTFImporter.cpp of the component glTFImporter. This manipulation causes null pointer dereference. The attack is restricted to local execution. The exploit has been published and may be used. The project tagged the reported issue as bug. |
| A vulnerability was detected in Assimp up to 6.0.4. Affected is the function glTF2Importer::ImportEmbeddedTextures in the library code/AssetLib/glTF2/glTF2Importer.cpp of the component TF File Handler. The manipulation results in null pointer dereference. The attack is only possible with local access. The exploit is now public and may be used. It is advisable to implement a patch to correct this issue. The pull request to fix this issue awaits acceptance. |
| NanoMQ MQTT Broker (NanoMQ) is an all-around Edge Messaging Platform. In 0.24.8 and earlier, quic_stream_recv can dereference a null substream pointer when a substream is in reopen state. The code finishes the AIO with error but does not return before locking c->mtx. |
| A NULL pointer dereference in GPAC MP4Box: when parsing certain truncated MP4 files, an unknown/invalid stsd entry can result in missing descriptor fields (e.g., codec/mime/profile strings). gf_media_map_esd then calls strlen() on a NULL pointer, triggering a crash (ASan SEGV). |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: Prevent NULL deref when RX memory exhausted
The CPU receives frames from the MAC through conventional DMA: the CPU
allocates buffers for the MAC, then the MAC fills them and returns
ownership to the CPU. For each hardware RX queue, the CPU and MAC
coordinate through a shared ring array of DMA descriptors: one
descriptor per DMA buffer. Each descriptor includes the buffer's
physical address and a status flag ("OWN") indicating which side owns
the buffer: OWN=0 for CPU, OWN=1 for MAC. The CPU is only allowed to set
the flag and the MAC is only allowed to clear it, and both must move
through the ring in sequence: thus the ring is used for both
"submissions" and "completions."
In the stmmac driver, stmmac_rx() bookmarks its position in the ring
with the `cur_rx` index. The main receive loop in that function checks
for rx_descs[cur_rx].own=0, gives the corresponding buffer to the
network stack (NULLing the pointer), and increments `cur_rx` modulo the
ring size. After the loop exits, stmmac_rx_refill(), which bookmarks its
position with `dirty_rx`, allocates fresh buffers and rearms the
descriptors (setting OWN=1). If it fails any allocation, it simply stops
early (leaving OWN=0) and will retry where it left off when next called.
This means descriptors have a three-stage lifecycle (terms my own):
- `empty` (OWN=1, buffer valid)
- `full` (OWN=0, buffer valid and populated)
- `dirty` (OWN=0, buffer NULL)
But because stmmac_rx() only checks OWN, it confuses `full`/`dirty`. In
the past (see 'Fixes:'), there was a bug where the loop could cycle
`cur_rx` all the way back to the first descriptor it dirtied, resulting
in a NULL dereference when mistaken for `full`. The aforementioned
commit resolved that *specific* failure by capping the loop's iteration
limit at `dma_rx_size - 1`, but this is only a partial fix: if the
previous stmmac_rx_refill() didn't complete, then there are leftover
`dirty` descriptors that the loop might encounter without needing to
cycle fully around. The current code therefore panics (see 'Closes:')
when stmmac_rx_refill() is memory-starved long enough for `cur_rx` to
catch up to `dirty_rx`.
Fix this by explicitly checking, before advancing `cur_rx`, if the next
entry is dirty; exit the loop if so. This prevents processing of the
final, used descriptor until stmmac_rx_refill() succeeds, but
fully prevents the `cur_rx == dirty_rx` ambiguity as the previous bugfix
intended: so remove the clamp as well. Since stmmac_rx_zc() is a
copy-paste-and-tweak of stmmac_rx() and the code structure is identical,
any fix to stmmac_rx() will also need a corresponding fix for
stmmac_rx_zc(). Therefore, apply the same check there.
In stmmac_rx() (not stmmac_rx_zc()), a related bug remains: after the
MAC sets OWN=0 on the final descriptor, it will be unable to send any
further DMA-complete IRQs until it's given more `empty` descriptors.
Currently, the driver simply *hopes* that the next stmmac_rx_refill()
succeeds, risking an indefinite stall of the receive process if not. But
this is not a regression, so it can be addressed in a future change. |
| Ubuntu Linux 6.8 contains SAUCE patches with a possible NULL pointer dereference in the handling of AppArmor notifications. The bug can be triggered by an unprivileged local user. This can lead to a kernel panic. |
| Ubuntu Linux 6.8, 6.17 and 7.0 contain SAUCE patches with a possible NULL pointer dereference in the handling of AF_INET/AF_INET6 socket mediation. The bug can be triggered by an unprivileged local user. This can lead to a kernel oops. |
| In the Linux kernel, the following vulnerability has been resolved:
atm: lec: fix null-ptr-deref in lec_arp_clear_vccs
syzkaller reported a null-ptr-deref in lec_arp_clear_vccs().
This issue can be easily reproduced using the syzkaller reproducer.
In the ATM LANE (LAN Emulation) module, the same atm_vcc can be shared by
multiple lec_arp_table entries (e.g., via entry->vcc or entry->recv_vcc).
When the underlying VCC is closed, lec_vcc_close() iterates over all
ARP entries and calls lec_arp_clear_vccs() for each matched entry.
For example, when lec_vcc_close() iterates through the hlists in
priv->lec_arp_empty_ones or other ARP tables:
1. In the first iteration, for the first matched ARP entry sharing the VCC,
lec_arp_clear_vccs() frees the associated vpriv (which is vcc->user_back)
and sets vcc->user_back to NULL.
2. In the second iteration, for the next matched ARP entry sharing the same
VCC, lec_arp_clear_vccs() is called again. It obtains a NULL vpriv from
vcc->user_back (via LEC_VCC_PRIV(vcc)) and then attempts to dereference it
via `vcc->pop = vpriv->old_pop`, leading to a null-ptr-deref crash.
Fix this by adding a null check for vpriv before dereferencing
it. If vpriv is already NULL, it means the VCC has been cleared
by a previous call, so we can safely skip the cleanup and just
clear the entry's vcc/recv_vcc pointers.
The entire cleanup block (including vcc_release_async()) is placed inside
the vpriv guard because a NULL vpriv indicates the VCC has already been
fully released by a prior iteration — repeating the teardown would
redundantly set flags and trigger callbacks on an already-closing socket.
The Fixes tag points to the initial commit because the entry->vcc path has
been vulnerable since the original code. The entry->recv_vcc path was later
added by commit 8d9f73c0ad2f ("atm: fix a memory leak of vcc->user_back")
with the same pattern, and both paths are fixed here. |
| The X.509 GeneralName type is a generic type for representing different types of names. One of those name types is known as EDIPartyName. OpenSSL provides a function GENERAL_NAME_cmp which compares different instances of a GENERAL_NAME to see if they are equal or not. This function behaves incorrectly when both GENERAL_NAMEs contain an EDIPARTYNAME. A NULL pointer dereference and a crash may occur leading to a possible denial of service attack. OpenSSL itself uses the GENERAL_NAME_cmp function for two purposes: 1) Comparing CRL distribution point names between an available CRL and a CRL distribution point embedded in an X509 certificate 2) When verifying that a timestamp response token signer matches the timestamp authority name (exposed via the API functions TS_RESP_verify_response and TS_RESP_verify_token) If an attacker can control both items being compared then that attacker could trigger a crash. For example if the attacker can trick a client or server into checking a malicious certificate against a malicious CRL then this may occur. Note that some applications automatically download CRLs based on a URL embedded in a certificate. This checking happens prior to the signatures on the certificate and CRL being verified. OpenSSL's s_server, s_client and verify tools have support for the "-crl_download" option which implements automatic CRL downloading and this attack has been demonstrated to work against those tools. Note that an unrelated bug means that affected versions of OpenSSL cannot parse or construct correct encodings of EDIPARTYNAME. However it is possible to construct a malformed EDIPARTYNAME that OpenSSL's parser will accept and hence trigger this attack. All OpenSSL 1.1.1 and 1.0.2 versions are affected by this issue. Other OpenSSL releases are out of support and have not been checked. Fixed in OpenSSL 1.1.1i (Affected 1.1.1-1.1.1h). Fixed in OpenSSL 1.0.2x (Affected 1.0.2-1.0.2w). |
| An issue was discovered in drivers/accessibility/speakup/spk_ttyio.c in the Linux kernel through 5.9.9. Local attackers on systems with the speakup driver could cause a local denial of service attack, aka CID-d41227544427. This occurs because of an invalid free when the line discipline is used more than once. |
| pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.9.1, src/log.c contains a process-wide static pointer that is written on every PAM invocation with the address of a stack-local variable. This violates the PAM re-entrancy requirement and creates a data race when the PAM stack is invoked concurrently from multiple threads. This vulnerability is fixed in 0.9.1. |
| pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.9.0, src/mem.c implemented out-of-memory guards for xmalloc(), xrealloc(), and xstrdup() using assert(data != NULL). The C standard specifies that all assert() expressions are compiled out when NDEBUG is defined at build time. NDEBUG is commonly defined in release and packaging builds (Debian, Fedora, Arch package flags all define it via -DNDEBUG in CFLAGS). With the guard removed, xmalloc/xrealloc/xstrdup silently return NULL on allocation failure. Every caller in the codebase dereferences the return value without a NULL check -- this is the intended design, as the guard was supposed to abort before the dereference. With the guard gone, any allocation failure causes a NULL pointer dereference, crashing the PAM module. A crash in a PAM module loaded by sudo or login causes authentication to fail for the duration of the crash, creating a local denial-of-service condition. An attacker who can induce memory pressure at authentication time can lock all users out of sudo and login. This vulnerability is fixed in 0.9.0. |
| pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.8.7, src/device.c passed the return values of udisks_drive_get_serial(), udisks_drive_get_vendor(), and udisks_drive_get_model() directly to strcmp() without NULL checks. The GIO/UDisks API documentation states these accessors can return NULL for devices that do not expose the corresponding field. Passing NULL to strcmp() is undefined behaviour (typically a SIGSEGV). This vulnerability is fixed in 0.8.7. |
| CODESYS Gateway 3 before 3.5.16.70 has a NULL pointer dereference that may result in a denial of service (DoS). |
