| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Buffer overflow vulnerability in Open Vehicle Monitoring System 3 (OVMS3) 3.3.005. In canformat_canswitch.cpp the parser does not properly validate a CANswitch DLC value, allowing remote attackers to cause a denial of service or possibly execute arbitrary code via crafted CANswitch frames. |
| AGL app-framework-binder (afb-daemon) through v19.90.0 contains a privilege escalation vulnerability in the supervision Do command. The on_supervision_call function in src/afb-supervision.c explicitly nullifies the request credentials by calling afb_context_change_cred(&xreq->context, NULL) before dispatching an attacker-controlled API call via xapi->itf->call(xapi->closure, xreq). The NULL propagation chain through afb-context.c:110 (context->credentials = afb_cred_addref(NULL)) and afb-cred.c:163 (returns NULL when cred is NULL) confirms that credentials are zeroed before the target API executes. The attacker controls both api and verb parameters via JSON input, allowing execution of any registered API with a NULL credential context. APIs that rely on context->credentials for authorization decisions may fail open when receiving NULL credentials, enabling privilege escalation. This vulnerability was introduced in commit abbb4599f0b921c6f434b6bd02bcfb277eecf745 on 2018-02-14. |
| AGL app-framework-binder (afb-daemon) through v19.90.0 allows any local process to execute privileged supervision commands (Exit, Do, Sclose, Config, Trace, Debug, Token, slist) without authentication via the abstract Unix socket @urn:AGL:afs:supervision:socket. The on_supervision_call function in src/afb-supervision.c dispatches all 8 commands without any credential verification. The abstract socket has no DAC protection, as acknowledged in the official CAUTION comment in src/afs-supervision.h. This allows a low-privileged local process to kill the daemon (DoS via Exit command), execute arbitrary API calls (via Do command), close arbitrary user sessions (via Sclose command), or leak the entire global configuration (via Config command). The vulnerability was introduced in commit b8c9d5de384efcfa53ebdb3f0053d7b3723777e1 on 2017-06-29. |
| AGL agl-service-can-low-level thru 17.1.12 contains a stack buffer overflow in the uds-c library. The send_diagnostic_request function in uds.c allocates a 6-byte stack buffer (MAX_DIAGNOSTIC_PAYLOAD_SIZE=6) but copies up to 7 bytes (MAX_UDS_REQUEST_PAYLOAD_LENGTH=7) via memcpy at an offset of 1+pid_length (2-3 bytes), resulting in 1-4 bytes of controlled stack overflow. The payload_length field (uint8_t) has no bounds check against the destination buffer. On 32-bit ARM automotive ECUs without stack canaries, this can lead to return address overwrite and RCE. |
| AGL app-framework-main thru 17.1.12 contains a Zip Slip path traversal vulnerability (CWE-22) combined with a TOCTOU race condition (CWE-367) in the widget installation flow. The is_valid_filename function in wgtpkg-zip.c validates ZIP entry names but does not check for dot notation directory traversal sequences it only blocks absolute paths. The zread extraction function uses openat(workdirfd, filename, O_CREAT) which resolves dot notation values relative to the work directory, allowing files to be written anywhere on the filesystem. Critically, in function install_widget in file wgtpkg-install.c, extraction via zread occurs BEFORE signature verification via check_all_signatures. Even if signature verification fails, the error cleanup (remove_workdir) only deletes the temporary work directory files written outside via path traversal persist permanently. |
| AGL agl-service-can-low-level thru 17.1.12 contains a heap buffer over-read in the isotp-c library. In isotp_continue_receive (receive.c:87-89), the payload_length for a Single Frame is extracted from a 4-bit nibble in the CAN frame data, yielding values 0-15. However, a standard CAN frame is only 8 bytes, with payload starting at data[1] (7 bytes available). When payload_length exceeds the available data (e.g., nibble=15 but only 7 payload bytes exist), memcpy(message.payload, &data[1], payload_length) reads up to 8 bytes past the end of the data buffer. |
| Integer underflow vulnerability in Open-SAE-J1939 thru commit b6caf884df46435e539b1ecbf92b6c29b345bdfe (2025-11-30) in SAE_J1939_Read_Transport_Protocol_Data_Transfer,allows attackers to write to arbitrary memory via crafted sequence number from the CAN frame. |
| openxc/isotp-c thru commit 5a5d19245f65189202719321facd49ce6f5d46ac (2021-08-09) contains an out-of-bounds read in the ISO-TP Single Frame receive handler, where the 4-bit payload length nibble is used directly as the memcpy size without validating it against the actual CAN data length. A malicious CAN frame with an oversized length nibble can cause memory reads beyond the buffer, allowing attackers to cause a denial of service, or gain sensitive information. |
| miaofng/uds-c commit e506334e270d77b20c0bc259ac6c7d8c9b702b7a (2016-10-05) contains a stack buffer overflow in send_diagnostic_request. A 6-byte stack buffer (MAX_DIAGNOSTIC_PAYLOAD_SIZE=6) receives memcpy at offset 1+pid_length with payload_length bytes. MAX_UDS_REQUEST_PAYLOAD_LENGTH=7, so 1+2+7=10 exceeds buffer by 4 bytes. No bounds check on payload_length before memcpy. |
| collin80/Open-SAE-J1939 thru commit 744024d4306bc387857dfce439558336806acb06 (2023-03-08) contains an integer underflow leading to out-of-bounds write in Transport Protocol Data Transfer handling. At line 23: uint8_t index = data[0] - 1. When data[0] (sequence number from CAN frame) is 0, index underflows to 255. Subsequent write at tp_dt->data[255*7 + i-1] reaches offset 1791, exceeding the MAX_TP_DT buffer (1785 bytes) by 6 bytes. |
| Buffer overflow vulnerability in socketcand 0.4.2 in file socketcand.c in function main allows attackers to cause a denial of service or other unspecified impacts via crafted bus_name. |
| AGL agl-service-can-low-level contains a stack buffer overflow in the uds-c library. The send_diagnostic_request function in uds.c allocates a 6-byte stack buffer (MAX_DIAGNOSTIC_PAYLOAD_SIZE=6) but copies up to 7 bytes (MAX_UDS_REQUEST_PAYLOAD_LENGTH=7) via memcpy at an offset of 1+pid_length (2-3 bytes), resulting in 1-4 bytes of controlled stack overflow. The payload_length field (uint8_t) has no bounds check against the destination buffer. On 32-bit ARM automotive ECUs without stack canaries, this can lead to return address overwrite and RCE. |
| An issue was discovered in Vanetza V2X v26.02 allowing remote unauthorized attackers to cause a denial of service. The vulnerability exists in the GeoNetworking packet processing pipeline where OpenSSL exceptions from ECC point validation (invalid compressed point, point not on curve) are not properly caught by the Router::indicate() call chain. The openssl_wrapper.cpp check() function (line 19) throws openssl::Exception when OpenSSL operations fail. The parser's catch block in parse_secured() should catch these, but the exception escapes through subsequent processing stages (indicate_common, indicate_extended). This causes std::terminate, crashing the V2X receiver. |
| flipperzero-firmware commit ad2a80 was discovered to contain a stack overflow in the "Main" function. |
| Multiple plugins and/or themes for WordPress are vulnerable to Reflected Cross-Site Scripting via the url parameter in various versions due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| The LabOne Q serialization framework uses a class-loading mechanism (import_cls) to dynamically import and instantiate Python classes during deserialization. Prior to the fix, this mechanism accepted arbitrary fully-qualified class names from the serialized data without any validation of the target class or restriction on which modules could be imported. An attacker can craft a serialized experiment file that causes the deserialization engine to import and instantiate arbitrary Python classes with attacker-controlled constructor arguments, resulting in arbitrary code execution in the context of the user running the Python process. Exploitation requires the victim to load a malicious file using LabOne Q's deserialization functions, for example a compromised experiment file shared for collaboration or support purposes. |
| A weakness has been identified in MacCMS Pro up to 2022.1.3. This vulnerability affects the function install of the file /admi.php/admin/addon/add.html of the component Plugin Installation Handler. Executing a manipulation can lead to unrestricted upload. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Widget Options – Advanced Conditional Visibility for Gutenberg Blocks & Classic Widgets plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 4.2.2 via the Display Logic feature. This is due to the plugin using eval() on user-supplied Display Logic expressions with an insufficient blocklist/allowlist that can be bypassed using array_map with string concatenation, combined with a lack of authorization enforcement on the extended_widget_opts_block attribute. This makes it possible for authenticated attackers, with Contributor-level access and above, to execute code on the server. The vulnerability was partially patched in version 4.2.0. |
| CTMS developed by Sunnet has a SQL Injection vulnerability, allowing authenticated remote attackers to inject arbitrary SQL commands to read, modify, and delete database contents. |
| CTMS and CPAS developed by Sunnet has an Arbitrary File Upload vulnerability, allowing privileged remote attackers to upload and execute web shell backdoors, thereby enabling arbitrary code execution on the server. |
