| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
atm: lec: fix use-after-free in sock_def_readable()
A race condition exists between lec_atm_close() setting priv->lecd
to NULL and concurrent access to priv->lecd in send_to_lecd(),
lec_handle_bridge(), and lec_atm_send(). When the socket is freed
via RCU while another thread is still using it, a use-after-free
occurs in sock_def_readable() when accessing the socket's wait queue.
The root cause is that lec_atm_close() clears priv->lecd without
any synchronization, while callers dereference priv->lecd without
any protection against concurrent teardown.
Fix this by converting priv->lecd to an RCU-protected pointer:
- Mark priv->lecd as __rcu in lec.h
- Use rcu_assign_pointer() in lec_atm_close() and lecd_attach()
for safe pointer assignment
- Use rcu_access_pointer() for NULL checks that do not dereference
the pointer in lec_start_xmit(), lec_push(), send_to_lecd() and
lecd_attach()
- Use rcu_read_lock/rcu_dereference/rcu_read_unlock in send_to_lecd(),
lec_handle_bridge() and lec_atm_send() to safely access lecd
- Use rcu_assign_pointer() followed by synchronize_rcu() in
lec_atm_close() to ensure all readers have completed before
proceeding. This is safe since lec_atm_close() is called from
vcc_release() which holds lock_sock(), a sleeping lock.
- Remove the manual sk_receive_queue drain from lec_atm_close()
since vcc_destroy_socket() already drains it after lec_atm_close()
returns.
v2: Switch from spinlock + sock_hold/put approach to RCU to properly
fix the race. The v1 spinlock approach had two issues pointed out
by Eric Dumazet:
1. priv->lecd was still accessed directly after releasing the
lock instead of using a local copy.
2. The spinlock did not prevent packets being queued after
lec_atm_close() drains sk_receive_queue since timer and
workqueue paths bypass netif_stop_queue().
Note: Syzbot patch testing was attempted but the test VM terminated
unexpectedly with "Connection to localhost closed by remote host",
likely due to a QEMU AHCI emulation issue unrelated to this fix.
Compile testing with "make W=1 net/atm/lec.o" passes cleanly. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq
The wacom_intuos_bt_irq() function processes Bluetooth HID reports
without sufficient bounds checking. A maliciously crafted short report
can trigger an out-of-bounds read when copying data into the wacom
structure.
Specifically, report 0x03 requires at least 22 bytes to safely read
the processed data and battery status, while report 0x04 (which
falls through to 0x03) requires 32 bytes.
Add explicit length checks for these report IDs and log a warning if
a short report is received. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: tcm_loop: Drain commands in target_reset handler
tcm_loop_target_reset() violates the SCSI EH contract: it returns SUCCESS
without draining any in-flight commands. The SCSI EH documentation
(scsi_eh.rst) requires that when a reset handler returns SUCCESS the driver
has made lower layers "forget about timed out scmds" and is ready for new
commands. Every other SCSI LLD (virtio_scsi, mpt3sas, ipr, scsi_debug,
mpi3mr) enforces this by draining or completing outstanding commands before
returning SUCCESS.
Because tcm_loop_target_reset() doesn't drain, the SCSI EH reuses in-flight
scsi_cmnd structures for recovery commands (e.g. TUR) while the target core
still has async completion work queued for the old se_cmd. The memset in
queuecommand zeroes se_lun and lun_ref_active, causing
transport_lun_remove_cmd() to skip its percpu_ref_put(). The leaked LUN
reference prevents transport_clear_lun_ref() from completing, hanging
configfs LUN unlink forever in D-state:
INFO: task rm:264 blocked for more than 122 seconds.
rm D 0 264 258 0x00004000
Call Trace:
__schedule+0x3d0/0x8e0
schedule+0x36/0xf0
transport_clear_lun_ref+0x78/0x90 [target_core_mod]
core_tpg_remove_lun+0x28/0xb0 [target_core_mod]
target_fabric_port_unlink+0x50/0x60 [target_core_mod]
configfs_unlink+0x156/0x1f0 [configfs]
vfs_unlink+0x109/0x290
do_unlinkat+0x1d5/0x2d0
Fix this by making tcm_loop_target_reset() actually drain commands:
1. Issue TMR_LUN_RESET via tcm_loop_issue_tmr() to drain all commands that
the target core knows about (those not yet CMD_T_COMPLETE).
2. Use blk_mq_tagset_busy_iter() to iterate all started requests and
flush_work() on each se_cmd — this drains any deferred completion work
for commands that already had CMD_T_COMPLETE set before the TMR (which
the TMR skips via __target_check_io_state()). This is the same pattern
used by mpi3mr, scsi_debug, and libsas to drain outstanding commands
during reset. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: file: Use kzalloc_flex for aio_cmd
The target_core_file doesn't initialize the aio_cmd->iocb for the
ki_write_stream. When a write command fd_execute_rw_aio() is executed,
we may get a bogus ki_write_stream value, causing unintended write
failure status when checking iocb->ki_write_stream > max_write_streams
in the block device.
Let's just use kzalloc_flex when allocating the aio_cmd and let
ki_write_stream=0 to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: correctly handle tunneled traffic on IPV6_CSUM GSO fallback
NETIF_F_IPV6_CSUM only advertises support for checksum offload of
packets without IPv6 extension headers. Packets with extension
headers must fall back onto software checksumming. Since TSO
depends on checksum offload, those must revert to GSO.
The below commit introduces that fallback. It always checks
network header length. For tunneled packets, the inner header length
must be checked instead. Extend the check accordingly.
A special case is tunneled packets without inner IP protocol. Such as
RFC 6951 SCTP in UDP. Those are not standard IPv6 followed by
transport header either, so also must revert to the software GSO path. |
| An issue was discovered in Prosody before 0.12.6 and 1.0.0 through 13.0.0 before 13.0.5, when mod_proxy65 is enabled. Because mod_proxy65 mishandles access control in the activation scenario, relaying of unauthenticated traffic can occur. |
| An issue was discovered in Prosody before 0.12.6 and 1.0.0 through 13.0.0 before 13.0.5. A Denial of Service can occur via memory exhaustion caused by memory leaks from unauthenticated connections. |
| An issue was discovered in Prosody before 0.12.6 and 1.0.0 through 13.0.0 before 13.0.5. A Denial of Service can occur via memory exhaustion caused by XML parsing resource amplification from unauthenticated connections. |
| An attachment spoofing issue in WhatsApp for Windows prior to v2.3000.1032164386.258709 could have allowed maliciously formatted documents with embedded NUL bytes in the filename to be shown in the application as one type of file but run as an executable when opened. We have not seen evidence of exploitation in the wild. |
| An unprivileged attacker can craft a user-space process with a malicious ELF binary containing an out-of-range sh_link field. When root-level dtrace attaches to -- or instruments -- that process (via dtrace -p , pid probes, or USDT), the ELF parser reads heap memory beyond the allocated section cache array without any bounds check. This results in an uninitialized/out-of-bounds heap read that can cause a NULL pointer dereference crash of the dtrace process (DoS), or -- depending on heap layout -- a read-then-use of a garbage pointer controlled by adjacent allocations, providing a foothold toward further exploitation in a privileged context. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix use-after-free of sbi in f2fs_compress_write_end_io()
In f2fs_compress_write_end_io(), dec_page_count(sbi, type) can bring
the F2FS_WB_CP_DATA counter to zero, unblocking
f2fs_wait_on_all_pages() in f2fs_put_super() on a concurrent unmount
CPU. The unmount path then proceeds to call
f2fs_destroy_page_array_cache(sbi), which destroys
sbi->page_array_slab via kmem_cache_destroy(), and eventually
kfree(sbi). Meanwhile, the bio completion callback is still executing:
when it reaches page_array_free(sbi, ...), it dereferences
sbi->page_array_slab — a destroyed slab cache — to call
kmem_cache_free(), causing a use-after-free.
This is the same class of bug as CVE-2026-23234 (which fixed the
equivalent race in f2fs_write_end_io() in data.c), but in the
compressed writeback completion path that was not covered by that fix.
Fix this by moving dec_page_count() to after page_array_free(), so
that all sbi accesses complete before the counter decrement that can
unblock unmount. For non-last folios (where atomic_dec_return on
cic->pending_pages is nonzero), dec_page_count is called immediately
before returning — page_array_free is not reached on this path, so
there is no post-decrement sbi access. For the last folio,
page_array_free runs while the F2FS_WB_CP_DATA counter is still
nonzero (this folio has not yet decremented it), keeping sbi alive,
and dec_page_count runs as the final operation. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use check_add_overflow() to prevent u16 DACL size overflow
set_posix_acl_entries_dacl() and set_ntacl_dacl() accumulate ACE sizes
in u16 variables. When a file has many POSIX ACL entries, the
accumulated size can wrap past 65535, causing the pointer arithmetic
(char *)pndace + *size to land within already-written ACEs. Subsequent
writes then overwrite earlier entries, and pndacl->size gets a
truncated value.
Use check_add_overflow() at each accumulation point to detect the
wrap before it corrupts the buffer, consistent with existing
check_mul_overflow() usage elsewhere in smbacl.c. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_hid: move list and spinlock inits from bind to alloc
There was an issue when you did the following:
- setup and bind an hid gadget
- open /dev/hidg0
- use the resulting fd in EPOLL_CTL_ADD
- unbind the UDC
- bind the UDC
- use the fd in EPOLL_CTL_DEL
When CONFIG_DEBUG_LIST was enabled, a list_del corruption was reported
within remove_wait_queue (via ep_remove_wait_queue). After some
debugging I found out that the queues, which f_hid registers via
poll_wait were the problem. These were initialized using
init_waitqueue_head inside hidg_bind. So effectively, the bind function
re-initialized the queues while there were still items in them.
The solution is to move the initialization from hidg_bind to hidg_alloc
to extend their lifetimes to the lifetime of the function instance.
Additionally, I found many other possibly problematic init calls in the
bind function, which I moved as well. |
| A vulnerability was detected in Dayoooun hwpx-mcp 0.2.0. This affects the function save_document/export_to_text/export_to_html of the file mcp-server/src/index.ts of the component MCP Interface. Performing a manipulation of the argument output_path results in path traversal. Remote exploitation of the attack is possible. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp: Don't attempt to copy PDH cert to userspace if PSP command failed
When retrieving the PDH cert, don't attempt to copy the blobs to userspace
if the firmware command failed. If the failure was due to an invalid
length, i.e. the userspace buffer+length was too small, copying the number
of bytes _firmware_ requires will overflow the kernel-allocated buffer and
leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 2084 at addr ffff8885c4ab8aa0 by task syz.0.186/21033
CPU: 51 UID: 0 PID: 21033 Comm: syz.0.186 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.84.12-0 11/17/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_pdh_export+0x3d3/0x7c0 ../drivers/crypto/ccp/sev-dev.c:2347
sev_ioctl+0x2a2/0x490 ../drivers/crypto/ccp/sev-dev.c:2568
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error. |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: fix TOCTOU race on mmap'd vnet_hdr in tpacket_snd()
In tpacket_snd(), when PACKET_VNET_HDR is enabled, vnet_hdr points
directly into the mmap'd TX ring buffer shared with userspace. The
kernel validates the header via __packet_snd_vnet_parse() but then
re-reads all fields later in virtio_net_hdr_to_skb(). A concurrent
userspace thread can modify the vnet_hdr fields between validation
and use, bypassing all safety checks.
The non-TPACKET path (packet_snd()) already correctly copies vnet_hdr
to a stack-local variable. All other vnet_hdr consumers in the kernel
(tun.c, tap.c, virtio_net.c) also use stack copies. The TPACKET TX
path is the only caller of virtio_net_hdr_to_skb() that reads directly
from user-controlled shared memory.
Fix this by copying vnet_hdr from the mmap'd ring buffer to a
stack-local variable before validation and use, consistent with the
approach used in packet_snd() and all other callers. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate owner of durable handle on reconnect
Currently, ksmbd does not verify if the user attempting to reconnect
to a durable handle is the same user who originally opened the file.
This allows any authenticated user to hijack an orphaned durable handle
by predicting or brute-forcing the persistent ID.
According to MS-SMB2, the server MUST verify that the SecurityContext
of the reconnect request matches the SecurityContext associated with
the existing open.
Add a durable_owner structure to ksmbd_file to store the original opener's
UID, GID, and account name. and catpure the owner information when a file
handle becomes orphaned. and implementing ksmbd_vfs_compare_durable_owner()
to validate the identity of the requester during SMB2_CREATE (DHnC). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: usbtmc: Flush anchored URBs in usbtmc_release
When calling usbtmc_release, pending anchored URBs must be flushed or
killed to prevent use-after-free errors (e.g. in the HCD giveback
path). Call usbtmc_draw_down() to allow anchored URBs to be completed. |
| A vulnerability was identified in eyal-gor p_69_branch_monkey_mcp up to 69bc71874ce40050ef45fde5a435855f18af3373. The affected element is an unknown function of the file branch_monkey_mcp/bridge_and_local_actions/routes/advanced.py of the component Preview Endpoint. Such manipulation of the argument dev_script leads to os command injection. The attack can be launched remotely. The exploit is publicly available and might be used. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| A flaw has been found in Open5GS up to 2.7.7. This issue affects the function bsf_sess_find_by_ipv6prefix of the file /src/bsf/context.c of the component BSF. This manipulation of the argument ipv6Prefix causes denial of service. It is possible to initiate the attack remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
