| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/x25: fix use-after-free of the socket by its timers
The x25 timers are armed with mod_timer() and cancelled with
timer_delete(), so a pending timer holds no reference on the socket and a
cancel does not wait for a callback already running on another CPU.
x25_heartbeat_expiry() also rearms unconditionally, so it can reinstall
sk->sk_timer after __x25_destroy_socket() has passed its cancel point.
The following __sock_put() frees the socket while the timer is still
queued, and the next expiry uses freed memory. KASAN reports a
slab-use-after-free on the kmalloc-2k object freed by close().
timer_delete_sync() cannot be used here: x25_heartbeat_expiry() and
x25_timer_expiry() both reach the cancels from inside the timer they
would wait on, through __x25_destroy_socket() and x25_disconnect().
Arm the timers with sk_reset_timer() and cancel them with sk_stop_timer()
so that an armed timer owns a reference, and release it in both expiry
handlers. Rearm the heartbeat only while sk_hashed(sk) is still true,
since __x25_destroy_socket() unlinks the socket before dropping it. Arm
the deferred destroy timer the same way and drop its reference in
x25_destroy_timer().
Reproduced on net with KASAN, with the heartbeat period shortened so the
window recurs. With this patch the reproducer no longer triggers a
report and /proc/net/x25 drains.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Prevent subbuf order change when resizing is disabled
Because ring_buffer_subbuf_order_set() frees buffer pages, we can't
allow it when resizing is disabled. A non-consuming reader is at risk of
use-after-free (rb_advance_iter()).
Return -EBUSY on resize_disabled, matching ring_buffer_resize()
behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix race between update_event_fields and, event_define_fields
The following sequence may leads race between event_define_fields()
and update_event_fields():
CPU0 (loads module A) CPU1 (loads module B)
=============================== ===============================
load_module(A) load_module(B)
notifier_call_chain notifier_call_chain
trace_module_notify trace_module_notify
mutex_lock(&event_mutex) trace_event_update_all()
trace_module_add_events(A) down_write(&trace_event_sem)
__register_event(call_A)
__add_event_to_tracers(call_A)
event_define_fields(call_A)
for each f: list_for_each_entry(field,
list_add(&f->link, &class->fields, link)
&class->fields) field = class->fields->next;
Where access to the class->fields is not protected by the event_mutex in
trace_event_update_all().
This produces the following panic:
Unable to handle kernel access ... at virtual address 0000000000000018
pc : update_event_fields+0xf8/0x368
Call trace:
update_event_fields+0xf8/0x368
trace_event_update_all+0x7c/0x2b4
trace_module_notify+0x4c/0x1dc
notifier_call_chain+0x84/0x168
blocking_notifier_call_chain_robust+0x64/0xd4
load_module+0x10c8/0x123c
__arm64_sys_finit_module+0x230/0x31c
Fix by taking event_mutex in trace_event_update_all() before
trace_event_sem. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Serialize the scheduler timeout handlers
V3D exposes several independent hardware queues (BIN, RENDER, TFU and
CSD) but has only a single, global reset. A timeout on any one queue
therefore has to stop, reset and restart the schedulers of every other
queue as well. That makes concurrent timeout handlers unsafe.
`reset_lock` was never able to make them safe, as a driver-side lock can
only cover the driver's &drm_sched_backend_ops.timedout_job callback.
The scheduler handles the timed out job and its pending list around that
callback, outside of the driver's control, so a global reset triggered
by one queue can still interfere with another queue that is in the
middle of handling a timeout of its own.
Consequently, if a reset happens in the CSD queue while a CL-intensive
application is running, the global reset stops and restarts the CL
queue's scheduler while that queue is handling a timeout of its own. As
drm_sched_stop() and drm_sched_start() subtract and add the credits of
every job sitting on the pending list of the scheduler they are called
on, and as the CL queue's handler concurrently takes its job off that
same list and puts it back, the stop and the start no longer see the
same set of jobs. The CL queue is left with more credits in flight than
its limit:
[ 327.302739] ------------[ cut here ]------------
[ 327.302744] WARNING: CPU: 2 PID: 43 at drivers/gpu/drm/scheduler/sched_main.c:102 drm_sched_run_job_work+0x238/0x4d0 [gpu_sched]
[ 327.302884] CPU: 2 UID: 0 PID: 43 Comm: kworker/u16:1 Not tainted 6.18.39-v8-16k+ #3 PREEMPT
[ 327.302889] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
[ 327.302893] Workqueue: v3d_bin drm_sched_run_job_work [gpu_sched]
[ 327.302984] Call trace:
[ 327.302987] drm_sched_run_job_work+0x238/0x4d0 [gpu_sched] (P)
[ 327.302997] process_scheduled_works+0x180/0x3d0
[ 327.303010] worker_thread+0x268/0x3e8
[ 327.303016] kthread+0x140/0x250
[ 327.303022] ret_from_fork+0x10/0x20
[ 327.303031] ---[ end trace 0000000000000000 ]---
From that point on, the credit count of the CL queue is broken, causing
a complete GPU hang and UI freeze.
The DRM scheduler already provides a mechanism to serialize the timeout
handlers of different schedulers: an ordered workqueue passed as
drm_sched_init()'s @timeout_wq parameter. By default, each scheduler
queues its timeout work on the system workqueue, which runs the handlers
concurrently. Give all of the queues a shared ordered workqueue instead,
as recommended by the DRM scheduler documentation for hardware that has
distinct queues but resets globally. |
| In the Linux kernel, the following vulnerability has been resolved:
samples/damon/mtier: error out for zero quota goal target values
Patch series "mm/damon: avoid division by zero from damos_quota_score()".
DAMON_SAMPLE_MTIER and DAMON_LRU_SORT allow the user to trigger division
by zero in damos_quota_score(). Avoid it by adding parameters validation
checks.
This patch (of 2):
damos_quota_score() can trigger division by zero if the target_value is
zero. DAMON_SAMPLE_MTIER lets users set the target_value via
node0_mem_{used,free}_bp parameters. It doesn't guard zero value case,
though. As a result, users can trigger division by zero. Fix the issue
by returning an error when the user tries to start DAMON with zero
node0_mem_{used,free}_bp parameter values.
DAMON_SAMPLE_MTIER is just a sample module, but the consequence is quite
bad. Also the zero node0_mem_free_bp parameter might look like a
reasonable setup to some users. Hence, the issue might really happen in
the real world.
One reliable way to reproduce the issue is like below:
# cd /sys/module/damon_sample_mtier/parameters
# echo 4096 > node0_start_addr
# echo 8192 > node0_end_addr
# echo 8192 > node1_start_addr
# echo 81920 > node1_end_addr
# echo 0 > node0_mem_free_bp
# echo Y > enabled
# dmesg -w
[...]
[18792.235916] Oops: divide error: 0000 [#1] SMP NOPTI
[...]
[18792.242787] RIP: 0010:damos_quota_score+0x6f/0x480
[...]
This issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/ops-common: putback folios on invalid migrate nid
damon_pa_migrate() and damos_va_migrate() isolate folios into a local list
and then call damon_migrate_pages(). When target_nid is invalid
(including the scheme default NUMA_NO_NODE / -1), damon_migrate_pages()
returns early without putting the folios back to the LRU.
Callers then discard the list head while those folios remain isolated with
an extra reference taken by folio_isolate_lru(). The pages stay off the
LRU for as long as the mapping exists (anon active+inactive counts drop
while RSS does not), and the leftover references can pin the pages after
the mapping is gone.
Put the folios back on the invalid-nid path so ignored migration requests
still return them to the LRU. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/lru_sort: error out for >10000 active_mem_bp
damos_quota_score() can trigger division by zero if the target value is
zero. DAMON_LRU_SORT lets users set the target value for the hot memory
scheme via active_mem_bp parameter. It avoids setting it as the target
value if the parameter value is zero. However, it also sets the cold
memory scheme with a target value that is calculated as '10000 -
active_mem_bp + 2'. Hence, if a user sets active_mem_bp 10002, the cold
memory scheme's quota goal target value can be zero. As a result,
division by zero can be triggered. Fix by returning an error when the
user tries to start DAMON with >10000 active_mem_bp parameter value.
It makes no sense to set active_mem_bp with 10002. It also requires
module parameters write permission to reproduce the issue. That said, the
consequence is quite bad.
One reliable way to reproduce the issue is like below:
# cd /sys/module/damon_lru_sort/parameters
# echo 1000 > wmarks_high
# echo 995 > wmarks_mid
# echo 0 > wmarks_low
# echo 10002 > active_mem_bp
# echo Y > enabled
# dmesg -w
[...]
[ 597.421247] Oops: divide error: 0000 [#1] SMP NOPTI
[ 597.428848] RIP: 0010:damos_quota_score+0x6f/0x480
This issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: take fl->lock when moving mmaps on interrupted invoke
When an invoke is interrupted by a signal,
wait_for_completion_interruptible() returns -ERESTARTSYS and
fastrpc_internal_invoke() moves every buffer from fl->mmaps onto
cctx->invoke_interrupted_mmaps. This list_del()/list_add_tail() walk
runs without holding fl->lock, the lock that serialises fl->mmaps in
fastrpc_req_mmap() and fastrpc_req_munmap() everywhere else.
Take fl->lock around the move, matching every other fl->mmaps accessor. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB read in WMM_param_handler()
WMM_param_handler() copies a fixed-size WMM parameter element out of a
received information element without checking that the element is long
enough, causing an out-of-bounds read for a short WMM IE.
The handler reads sizeof(struct WMM_para_element) (18) bytes at
pIE->data + 6, so it requires pIE->length to be at least 24
(WLAN_WMM_LEN), but it never validates the length. Two of its three
callers reach it after matching only the WMM OUI: OnAssocRsp() in
rtw_mlme_ext.c matches a 6-byte OUI, and join_cmd_hdl() matches a
4-byte OUI, before calling the handler. A vendor-specific IE carrying
the WMM OUI but a length between 6 and 23, placed in an association
response or in the IE blob handed to join_cmd_hdl(), passes the OUI
check and then makes the memcmp() and memcpy() at pIE->data + 6 read
past the end of the element. OnAssocRsp() parses a frame received from
the AP, so this is reachable from a remote peer.
The remaining caller in rtw_wlan_util.c already guards the handler with
"pIE->length == WLAN_WMM_LEN". Move the equivalent check into the
handler itself so every caller is covered; the sibling IE handlers in
the same parsing loop (HT_caps_handler(), HT_info_handler(),
ERP_IE_handler()) likewise bound their accesses by pIE->length. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "thermal/drivers/hwmon: Cleanup coding style a bit"
Revert commit 030a48b0f6ce ("thermal/drivers/hwmon: Cleanup coding style
a bit") that introduced a use-after-free into the error path of
thermal_add_hwmon_sysfs() by removing a valid check from it. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Fix use-after-free in eventfs_remove_rec()
eventfs_remove_rec() recursively removes the child at the current loop
position. After the recursive call returns, list_for_each_entry() advances
by reading list.next from the removed child.
If free_ei() drops the final reference, release_ei() reuses the list/rcu
union to queue an SRCU callback. The child may be freed before that read.
The eventfs_mutex serializes list updates, but it does not keep the removed
child alive or prevent the SRCU callback from running.
Use list_for_each_entry_safe() to save the next sibling before recursively
removing the current child. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix use-after-free in cifs_try_adding_channels()
cifs_try_adding_channels() takes a temporary reference to an interface
before dropping iface_lock. If cifs_ses_add_channel() fails, it drops
that reference and then increments iface->weight_fulfilled.
A concurrent interface list refresh can remove the list reference while
channel creation is in progress. In that case, the failure-path
kref_put() releases the last reference and frees iface. Updating
weight_fulfilled afterward then accesses freed memory.
Increment weight_fulfilled before dropping the temporary reference,
keeping iface alive for the final access. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: avoid refilling the RX queue after teardown
Commit b917507e5ad9 ("vsock/virtio: stop workers during the .remove()")
made the RX worker jump to its common exit when rx_run is clear. That
exit still refills the RX queue when the buffer count is low, so work
queued across virtio_vsock_vqs_del() can add buffers after the virtqueues
have been deleted.
BUG: KASAN: slab-use-after-free in virtqueue_add_sgs
Read of size 4 by task kworker/0:1
Workqueue: virtio_vsock virtio_transport_rx_work
Call Trace:
virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2796)
virtio_vsock_rx_fill (net/vmw_vsock/virtio_transport.c:332)
virtio_transport_rx_work (net/vmw_vsock/virtio_transport.c:701)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
...
Freed by task 141:
kfree (mm/slub.c:6566)
vp_del_vq (drivers/virtio/virtio_pci_common.c:259)
vp_del_vqs (drivers/virtio/virtio_pci_common.c:285)
virtio_vsock_freeze (net/vmw_vsock/virtio_transport.c:912)
virtio_device_freeze (drivers/virtio/virtio.c:658)
virtio_pci_freeze (drivers/virtio/virtio_pci_common.c:601)
pci_pm_freeze (drivers/pci/pci-driver.c:1098)
device_suspend (drivers/base/power/main.c:1968)
Kernel panic - not syncing: KASAN: panic_on_warn set ...
Jump to a no-refill exit when rx_run is clear, leaving the normal exit
to replenish a running queue. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: do not arm the ageing timer on a device that is down
vxlan_changelink() arms vxlan->age_timer whenever the requested ageing
interval differs from the configured one:
if (conf.age_interval != vxlan->cfg.age_interval)
mod_timer(&vxlan->age_timer, jiffies);
There is no netif_running() test, so the timer is armed even on a device
that was never brought up. The only synchronous cancel in the driver is
the timer_delete_sync() in vxlan_stop(), which is .ndo_stop.
netif_close_many() drops devices without IFF_UP before
__dev_close_many() runs, so that cancel is skipped for such a device.
vxlan_setup() sets dev->needs_free_netdev = true and age_timer is a
member of struct vxlan_dev, so free_netdev() releases the allocation the
timer lives in while it is still queued on a timer_base.
expire_timers() unlinks the entry before it loads timer->function, so
the timer core writes through the freed object's list pointers:
BUG: KASAN: slab-use-after-free in __run_timers+0x208/0x654
Write of size 8 at addr ffff00001adace68 by task true/192
__asan_store8+0x84/0xac
__run_timers+0x208/0x654
run_timer_softirq+0x154/0x18c
Allocated by task 189:
alloc_netdev_mqs+0x64/0x720
rtnl_create_link+0x4ac/0x520
rtnl_newlink+0x758/0xd00
Freed by task 191:
netdev_release+0x40/0x58
netdev_run_todo+0x4a4/0x8c0
rtnl_dellink+0x200/0x4e8
The rtnl operations involved are netns-scoped, so an unprivileged user
can perform them in a new user and network namespace.
Arming the timer on a down device never had an effect: vxlan_cleanup()
returns early on !netif_running(), and vxlan_open() arms the timer for
any non-zero interval once the device is brought up. Add the missing
test.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB read in rtw_get_wpa_ie()
rtw_get_wpa_ie() reads bytes at fixed offsets into a vendor-specific
information element without checking that the element is long enough,
causing an out-of-bounds read for a short trailing IE.
The function locates a vendor-specific IE (EID 221) with rtw_get_ie()
and then compares a 4-byte OUI+type at pbuf + 2 and reads a 2-byte
version word at pbuf + 6. Those accesses require the IE body to be at
least 6 bytes, but rtw_get_ie() only guarantees that the element fits
within the buffer; it does not enforce a minimum body length. A
vendor-specific IE whose length byte is 0 to 5, placed at the end of
the buffer, therefore makes these reads run past the end of the IE and
past the end of the buffer itself.
The buffer holds information elements taken from received management
frames and from the IE blob passed to rtw_cfg80211_set_wpa_ie(), which
is kmemdup'd to its exact length, so the read can run off the end of
the allocation.
The sibling helpers rtw_get_sec_ie(), rtw_get_wapi_ie() and
rtw_get_wps_ie() in this file already reject too-short vendor-specific
IEs before their OUI memcmp(); rtw_get_wpa_ie() was never brought in
line with them, and needs a minimum of 6 rather than 4 bytes because
of the version word. Add the missing length check. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: amba-pl011: cancel RS485 hrtimers after freeing IRQ
The RS485 trigger hrtimers are embedded in the devm-managed port and can
fire after it is freed. The IRQ handler can arm a timer, so free the IRQ
first and then cancel both timers.
Complete the RS485 stop without arming a timer, and cancel the timers
in remove() for the suspend-then-unbind path, where shutdown is not
called.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_of: clear stuck empty-FIFO RX-timeout on LPC32xx
The NXP LPC32xx UART (PORT_LPC3220) can latch an RX character-timeout
interrupt while the RX FIFO is empty: IIR reports UART_IIR_RX_TIMEOUT
(0x0c) but LSR.DR is clear. A character timeout is only cleared by
reading RHR, but serial8250_rx_chars() reads RHR only when LSR.DR is
set, so nothing ever clears the condition. The interrupt is
level-triggered and re-fires immediately, so on a single-core ARM926
the resulting interrupt storm livelocks the CPU.
It is reproducible when userspace repeatedly opens the front-panel port
(ttyS1): serial8250_do_set_termios() re-enables interrupts on unlock and
the handler then spins forever with iir=0xcc lsr=0x60 ier=0x05, tripping
the soft-lockup detector in serial8250_handle_irq_locked().
LPC32xx has no dedicated 8250 glue driver, it's driven by the generic
8250_of. Add a hardware specific handle_irq for PORT_LPC3220, wired up
in of_platform_serial_setup() the same way fsl8250_handle_irq is
installed. The handler follows dw8250_handle_irq(): on an RX timeout
with an empty FIFO (LSR.DR and LSR.BI clear) it does one throwaway RHR
read to clear the condition, then calls serial8250_handle_irq_locked().
No real received data is ever discarded, and it is a no-op on healthy
UARTs which never report a timeout with DR clear.
This is the same class of bug already worked around in other 8250 drivers;
see commit 424d79183af0 ("serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt")
which reports the identical iir=0xcc/lsr=0x60. See also
UART_RX_TIMEOUT_QUIRK in 8250_omap, and the note in 8250_bcm7271. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: qcom-geni: fix TX DMA buffer flush
When transmit flushing a qcom-geni UART during an ongoing TX DMA, the
UART gets stuck infinitely repeating corrupted TX DMA frames.
The DMA-mode uart_ops does not provide a flush_buffer callback, so an
in-flight transfer can complete after serial core has reset the transmit
kfifo, underflowing its length and resubmitting page-sized transfers
indefinitely. Add one that stops the transfer and clears tx_remaining
and tx_queued.
The stop path was also broken: it unmapped the buffer while the serial
engine could still read it, and never reset the TX DMA state machine.
Cancel the main sequencer command first, then reset the state machine
and wait for it before unmapping. Drop the early return so a pending
mapping is also cleaned up when the main command is inactive.
The bug can be triggered from userspace with a large write immediately
followed by TCOFLUSH. A following tcdrain will hang forever. The bug was
reproduced and this fix was validated on Arduino Uno Q (QRB2210)
using /dev/ttyHS1. |
| Joomla Extension - fabrikar.com - Missing ACL check in download element in Fabrik < 4.7.3 - ???. |
| In the Linux kernel, the following vulnerability has been resolved:
xdp: reject clones that overrun skb_shared_info tailroom
xdpf_clone() clones broadcast copies into a single page and sets
frame_sz to PAGE_SIZE. __xdp_build_skb_from_frame() later treats that
page like a normal XDP frame and expects the usual skb_shared_info
tailroom at the end of the buffer.
The current check only rejects frames whose linear xdp_frame header,
headroom, and packet data exceed PAGE_SIZE. A source frame backed by a
larger allocation can still satisfy that check while extending into the
clone's required shared-info area. When such a clone is converted back
into an skb, build_skb_around() places skb_shared_info over live packet
bytes and later writes can corrupt XDP return metadata.
Reject clones unless their linear area fits inside
SKB_WITH_OVERHEAD(PAGE_SIZE), matching the tailroom requirement already
enforced by the XDP-to-skb conversion path. |
