| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was identified in code-projects Online Guitar Store 1.0. Affected by this issue is some unknown functionality of the file /login.php. The manipulation of the argument L_email leads to sql injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. |
| A vulnerability has been found in code-projects Online Guitar Store 1.0. This impacts an unknown function of the file /admin/Create_category.php. Such manipulation of the argument dre_Ctitle leads to sql injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. |
| A flaw has been found in PHPGurukul Online Course Registration up to 3.1. This affects an unknown function. This manipulation causes missing authorization. Remote exploitation of the attack is possible. The exploit has been published and may be used. |
| A vulnerability was detected in PHPEMS up to 11.0. The impacted element is an unknown function. The manipulation results in cross-site request forgery. The attack may be launched remotely. |
| A security vulnerability has been detected in campcodes School File Management System 1.0. The affected element is an unknown function of the file /save_file.php. The manipulation of the argument File leads to unrestricted upload. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. |
| A flaw was identified in the Docker v2 authentication endpoint of Keycloak, where tokens continue to be issued even after a Docker registry client has been administratively disabled. This means that turning the client “Enabled” setting to OFF does not fully prevent access. As a result, previously valid credentials can still be used to obtain authentication tokens. This weakens administrative controls and could allow unintended access to container registry resources. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: split cached_fid bitfields to avoid shared-byte RMW races
is_open, has_lease and on_list are stored in the same bitfield byte in
struct cached_fid but are updated in different code paths that may run
concurrently. Bitfield assignments generate byte read–modify–write
operations (e.g. `orb $mask, addr` on x86_64), so updating one flag can
restore stale values of the others.
A possible interleaving is:
CPU1: load old byte (has_lease=1, on_list=1)
CPU2: clear both flags (store 0)
CPU1: RMW store (old | IS_OPEN) -> reintroduces cleared bits
To avoid this class of races, convert these flags to separate bool
fields. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: virtio - Add spinlock protection with virtqueue notification
When VM boots with one virtio-crypto PCI device and builtin backend,
run openssl benchmark command with multiple processes, such as
openssl speed -evp aes-128-cbc -engine afalg -seconds 10 -multi 32
openssl processes will hangup and there is error reported like this:
virtio_crypto virtio0: dataq.0:id 3 is not a head!
It seems that the data virtqueue need protection when it is handled
for virtio done notification. If the spinlock protection is added
in virtcrypto_done_task(), openssl benchmark with multiple processes
works well. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection()
On kthread_run() failure in ksmbd_tcp_new_connection(), the transport is
freed via free_transport(), which does not decrement active_num_conn,
leaking this counter.
Replace free_transport() with ksmbd_tcp_disconnect(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
Exynos Virtual Display driver performs memory alloc/free operations
without lock protection, which easily causes concurrency problem.
For example, use-after-free can occur in race scenario like this:
```
CPU0 CPU1 CPU2
---- ---- ----
vidi_connection_ioctl()
if (vidi->connection) // true
drm_edid = drm_edid_alloc(); // alloc drm_edid
...
ctx->raw_edid = drm_edid;
...
drm_mode_getconnector()
drm_helper_probe_single_connector_modes()
vidi_get_modes()
if (ctx->raw_edid) // true
drm_edid_dup(ctx->raw_edid);
if (!drm_edid) // false
...
vidi_connection_ioctl()
if (vidi->connection) // false
drm_edid_free(ctx->raw_edid); // free drm_edid
...
drm_edid_alloc(drm_edid->edid)
kmemdup(edid); // UAF!!
...
```
To prevent these vulns, at least in vidi_context, member variables related
to memory alloc/free should be protected with ctx->lock. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: add chann_lock to protect ksmbd_chann_list xarray
ksmbd_chann_list xarray lacks synchronization, allowing use-after-free in
multi-channel sessions (between lookup_chann_list() and ksmbd_chann_del).
Adds rw_semaphore chann_lock to struct ksmbd_session and protects
all xa_load/xa_store/xa_erase accesses. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/mmcid: Don't assume CID is CPU owned on mode switch
Shinichiro reported a KASAN UAF, which is actually an out of bounds access
in the MMCID management code.
CPU0 CPU1
T1 runs in userspace
T0: fork(T4) -> Switch to per CPU CID mode
fixup() set MM_CID_TRANSIT on T1/CPU1
T4 exit()
T3 exit()
T2 exit()
T1 exit() switch to per task mode
---> Out of bounds access.
As T1 has not scheduled after T0 set the TRANSIT bit, it exits with the
TRANSIT bit set. sched_mm_cid_remove_user() clears the TRANSIT bit in
the task and drops the CID, but it does not touch the per CPU storage.
That's functionally correct because a CID is only owned by the CPU when
the ONCPU bit is set, which is mutually exclusive with the TRANSIT flag.
Now sched_mm_cid_exit() assumes that the CID is CPU owned because the
prior mode was per CPU. It invokes mm_drop_cid_on_cpu() which clears the
not set ONCPU bit and then invokes clear_bit() with an insanely large
bit number because TRANSIT is set (bit 29).
Prevent that by actually validating that the CID is CPU owned in
mm_drop_cid_on_cpu(). |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix UAF issue for file-backed mounts w/ directio option
[ 9.269940][ T3222] Call trace:
[ 9.269948][ T3222] ext4_file_read_iter+0xac/0x108
[ 9.269979][ T3222] vfs_iocb_iter_read+0xac/0x198
[ 9.269993][ T3222] erofs_fileio_rq_submit+0x12c/0x180
[ 9.270008][ T3222] erofs_fileio_submit_bio+0x14/0x24
[ 9.270030][ T3222] z_erofs_runqueue+0x834/0x8ac
[ 9.270054][ T3222] z_erofs_read_folio+0x120/0x220
[ 9.270083][ T3222] filemap_read_folio+0x60/0x120
[ 9.270102][ T3222] filemap_fault+0xcac/0x1060
[ 9.270119][ T3222] do_pte_missing+0x2d8/0x1554
[ 9.270131][ T3222] handle_mm_fault+0x5ec/0x70c
[ 9.270142][ T3222] do_page_fault+0x178/0x88c
[ 9.270167][ T3222] do_translation_fault+0x38/0x54
[ 9.270183][ T3222] do_mem_abort+0x54/0xac
[ 9.270208][ T3222] el0_da+0x44/0x7c
[ 9.270227][ T3222] el0t_64_sync_handler+0x5c/0xf4
[ 9.270253][ T3222] el0t_64_sync+0x1bc/0x1c0
EROFS may encounter above panic when enabling file-backed mount w/
directio mount option, the root cause is it may suffer UAF in below
race condition:
- z_erofs_read_folio wq s_dio_done_wq
- z_erofs_runqueue
- erofs_fileio_submit_bio
- erofs_fileio_rq_submit
- vfs_iocb_iter_read
- ext4_file_read_iter
- ext4_dio_read_iter
- iomap_dio_rw
: bio was submitted and return -EIOCBQUEUED
- dio_aio_complete_work
- dio_complete
- dio->iocb->ki_complete (erofs_fileio_ki_complete())
- kfree(rq)
: it frees iocb, iocb.ki_filp can be UAF in file_accessed().
- file_accessed
: access NULL file point
Introduce a reference count in struct erofs_fileio_rq, and initialize it
as two, both erofs_fileio_ki_complete() and erofs_fileio_rq_submit() will
decrease reference count, the last one decreasing the reference count
to zero will free rq. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix UAF in xchk_btree_check_block_owner
We cannot dereference bs->cur when trying to determine if bs->cur
aliases bs->sc->sa.{bno,rmap}_cur after the latter has been freed.
Fix this by sampling before type before any freeing could happen.
The correct temporal ordering was broken when we removed xfs_btnum_t. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: omap - Allocate OMAP_CRYPTO_FORCE_COPY scatterlists correctly
The existing allocation of scatterlists in omap_crypto_copy_sg_lists()
was allocating an array of scatterlist pointers, not scatterlist objects,
resulting in a 4x too small allocation.
Use sizeof(*new_sg) to get the correct object size. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: fsl-mc: fix use-after-free in driver_override_show()
The driver_override_show() function reads the driver_override string
without holding the device_lock. However, driver_override_store() uses
driver_set_override(), which modifies and frees the string while holding
the device_lock.
This can result in a concurrent use-after-free if the string is freed
by the store function while being read by the show function.
Fix this by holding the device_lock around the read operation. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix infinite loop caused by next_smb2_rcv_hdr_off reset in error paths
The problem occurs when a signed request fails smb2 signature verification
check. In __process_request(), if check_sign_req() returns an error,
set_smb2_rsp_status(work, STATUS_ACCESS_DENIED) is called.
set_smb2_rsp_status() set work->next_smb2_rcv_hdr_off as zero. By resetting
next_smb2_rcv_hdr_off to zero, the pointer to the next command in the chain
is lost. Consequently, is_chained_smb2_message() continues to point to
the same request header instead of advancing. If the header's NextCommand
field is non-zero, the function returns true, causing __handle_ksmbd_work()
to repeatedly process the same failed request in an infinite loop.
This results in the kernel log being flooded with "bad smb2 signature"
messages and high CPU usage.
This patch fixes the issue by changing the return value from
SERVER_HANDLER_CONTINUE to SERVER_HANDLER_ABORT. This ensures that
the processing loop terminates immediately rather than attempting to
continue from an invalidated offset. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: Fix potential block overflow that cause system hang
When a user executes the FITRIM command, an underflow can occur when
calculating nblocks if end_block is too small. Since nblocks is of
type sector_t, which is u64, a negative nblocks value will become a
very large positive integer. This ultimately leads to the block layer
function __blkdev_issue_discard() taking an excessively long time to
process the bio chain, and the ns_segctor_sem lock remains held for a
long period. This prevents other tasks from acquiring the ns_segctor_sem
lock, resulting in the hang reported by syzbot in [1].
If the ending block is too small, typically if it is smaller than 4KiB
range, depending on the usage of the segment 0, it may be possible to
attempt a discard request beyond the device size causing the hang.
Exiting successfully and assign the discarded size (0 in this case)
to range->len.
Although the start and len values in the user input range are too small,
a conservative strategy is adopted here to safely ignore them, which is
equivalent to a no-op; it will not perform any trimming and will not
throw an error.
[1]
task:segctord state:D stack:28968 pid:6093 tgid:6093 ppid:2 task_flags:0x200040 flags:0x00080000
Call Trace:
rwbase_write_lock+0x3dd/0x750 kernel/locking/rwbase_rt.c:272
nilfs_transaction_lock+0x253/0x4c0 fs/nilfs2/segment.c:357
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2569 [inline]
nilfs_segctor_thread+0x6ec/0xe00 fs/nilfs2/segment.c:2684
[ryusuke: corrected part of the commit message about the consequences] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Validate sp before freeing associated memory
System crash with the following signature
[154563.214890] nvme nvme2: NVME-FC{1}: controller connect complete
[154564.169363] qla2xxx [0000:b0:00.1]-3002:2: nvme: Sched: Set ZIO exchange threshold to 3.
[154564.169405] qla2xxx [0000:b0:00.1]-ffffff:2: SET ZIO Activity exchange threshold to 5.
[154565.539974] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed – 0078 0080 0000.
[154565.545744] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed – 0078 00a0 0000.
[154565.545857] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate).
[154565.552760] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate).
[154565.553079] BUG: kernel NULL pointer dereference, address: 00000000000000f8
[154565.553080] #PF: supervisor read access in kernel mode
[154565.553082] #PF: error_code(0x0000) - not-present page
[154565.553084] PGD 80000010488ab067 P4D 80000010488ab067 PUD 104978a067 PMD 0
[154565.553089] Oops: 0000 1 PREEMPT SMP PTI
[154565.553092] CPU: 10 PID: 858 Comm: qla2xxx_2_dpc Kdump: loaded Tainted: G OE ------- --- 5.14.0-503.11.1.el9_5.x86_64 #1
[154565.553096] Hardware name: HPE Synergy 660 Gen10/Synergy 660 Gen10 Compute Module, BIOS I43 09/30/2024
[154565.553097] RIP: 0010:qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx]
[154565.553141] Code: 00 00 e8 58 a3 ec d4 49 89 e9 ba 12 20 00 00 4c 89 e6 49 c7 c0 00 ee a8 c0 48 c7 c1 66 c0 a9 c0 bf 00 80 00 10 e8 15 69 00 00 <4c> 8b 8d f8 00 00 00 4d 85 c9 74 35 49 8b 84 24 00 19 00 00 48 8b
[154565.553143] RSP: 0018:ffffb4dbc8aebdd0 EFLAGS: 00010286
[154565.553145] RAX: 0000000000000000 RBX: ffff8ec2cf0908d0 RCX: 0000000000000002
[154565.553147] RDX: 0000000000000000 RSI: ffffffffc0a9c896 RDI: ffffb4dbc8aebd47
[154565.553148] RBP: 0000000000000000 R08: ffffb4dbc8aebd45 R09: 0000000000ffff0a
[154565.553150] R10: 0000000000000000 R11: 000000000000000f R12: ffff8ec2cf0908d0
[154565.553151] R13: ffff8ec2cf090900 R14: 0000000000000102 R15: ffff8ec2cf084000
[154565.553152] FS: 0000000000000000(0000) GS:ffff8ed27f800000(0000) knlGS:0000000000000000
[154565.553154] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[154565.553155] CR2: 00000000000000f8 CR3: 000000113ae0a005 CR4: 00000000007706f0
[154565.553157] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[154565.553158] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[154565.553159] PKRU: 55555554
[154565.553160] Call Trace:
[154565.553162] <TASK>
[154565.553165] ? show_trace_log_lvl+0x1c4/0x2df
[154565.553172] ? show_trace_log_lvl+0x1c4/0x2df
[154565.553177] ? qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx]
[154565.553215] ? __die_body.cold+0x8/0xd
[154565.553218] ? page_fault_oops+0x134/0x170
[154565.553223] ? snprintf+0x49/0x70
[154565.553229] ? exc_page_fault+0x62/0x150
[154565.553238] ? asm_exc_page_fault+0x22/0x30
Check for sp being non NULL before freeing any associated memory |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Delay module unload while fabric scan in progress
System crash seen during load/unload test in a loop.
[105954.384919] RBP: ffff914589838dc0 R08: 0000000000000000 R09: 0000000000000086
[105954.384920] R10: 000000000000000f R11: ffffa31240904be5 R12: ffff914605f868e0
[105954.384921] R13: ffff914605f86910 R14: 0000000000008010 R15: 00000000ddb7c000
[105954.384923] FS: 0000000000000000(0000) GS:ffff9163fec40000(0000) knlGS:0000000000000000
[105954.384925] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[105954.384926] CR2: 000055d31ce1d6a0 CR3: 0000000119f5e001 CR4: 0000000000770ee0
[105954.384928] PKRU: 55555554
[105954.384929] Call Trace:
[105954.384931] <IRQ>
[105954.384934] qla24xx_sp_unmap+0x1f3/0x2a0 [qla2xxx]
[105954.384962] ? qla_async_scan_sp_done+0x114/0x1f0 [qla2xxx]
[105954.384980] ? qla24xx_els_ct_entry+0x4de/0x760 [qla2xxx]
[105954.384999] ? __wake_up_common+0x80/0x190
[105954.385004] ? qla24xx_process_response_queue+0xc2/0xaa0 [qla2xxx]
[105954.385023] ? qla24xx_msix_rsp_q+0x44/0xb0 [qla2xxx]
[105954.385040] ? __handle_irq_event_percpu+0x3d/0x190
[105954.385044] ? handle_irq_event+0x58/0xb0
[105954.385046] ? handle_edge_irq+0x93/0x240
[105954.385050] ? __common_interrupt+0x41/0xa0
[105954.385055] ? common_interrupt+0x3e/0xa0
[105954.385060] ? asm_common_interrupt+0x22/0x40
The root cause of this was that there was a free (dma_free_attrs) in the
interrupt context. There was a device discovery/fabric scan in
progress. A module unload was issued which set the UNLOADING flag. As
part of the discovery, after receiving an interrupt a work queue was
scheduled (which involved a work to be queued). Since the UNLOADING
flag is set, the work item was not allocated and the mapped memory had
to be freed. The free occurred in interrupt context leading to system
crash. Delay the driver unload until the fabric scan is complete to
avoid the crash. |
