| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_fw: fix NULL pointer dereference on shared blocks
The old-method path in fw_classify() calls tcf_block_q() and
dereferences q->handle. Shared blocks leave block->q NULL, causing a
NULL deref when an empty cls_fw filter is attached to a shared block
and a packet with a nonzero major skb mark is classified.
Reject the configuration in fw_change() when the old method (no
TCA_OPTIONS) is used on a shared block, since fw_classify()'s
old-method path needs block->q which is NULL for shared blocks.
The fixed null-ptr-deref calling stack:
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
RIP: 0010:fw_classify (net/sched/cls_fw.c:81)
Call Trace:
tcf_classify (./include/net/tc_wrapper.h:197 net/sched/cls_api.c:1764 net/sched/cls_api.c:1860)
tc_run (net/core/dev.c:4401)
__dev_queue_xmit (net/core/dev.c:4535 net/core/dev.c:4790) |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_flow: fix NULL pointer dereference on shared blocks
flow_change() calls tcf_block_q() and dereferences q->handle to derive
a default baseclass. Shared blocks leave block->q NULL, causing a NULL
deref when a flow filter without a fully qualified baseclass is created
on a shared block.
Check tcf_block_shared() before accessing block->q and return -EINVAL
for shared blocks. This avoids the null-deref shown below:
=======================================================================
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
RIP: 0010:flow_change (net/sched/cls_flow.c:508)
Call Trace:
tc_new_tfilter (net/sched/cls_api.c:2432)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6980)
[...]
======================================================================= |
| In the Linux kernel, the following vulnerability has been resolved:
rds: ib: reject FRMR registration before IB connection is established
rds_ib_get_mr() extracts the rds_ib_connection from conn->c_transport_data
and passes it to rds_ib_reg_frmr() for FRWR memory registration. On a
fresh outgoing connection, ic is allocated in rds_ib_conn_alloc() with
i_cm_id = NULL because the connection worker has not yet called
rds_ib_conn_path_connect() to create the rdma_cm_id. When sendmsg() with
RDS_CMSG_RDMA_MAP is called on such a connection, the sendmsg path parses
the control message before any connection establishment, allowing
rds_ib_post_reg_frmr() to dereference ic->i_cm_id->qp and crash the
kernel.
The existing guard in rds_ib_reg_frmr() only checks for !ic (added in
commit 9e630bcb7701), which does not catch this case since ic is allocated
early and is always non-NULL once the connection object exists.
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:rds_ib_post_reg_frmr+0x50e/0x920
Call Trace:
rds_ib_post_reg_frmr (net/rds/ib_frmr.c:167)
rds_ib_map_frmr (net/rds/ib_frmr.c:252)
rds_ib_reg_frmr (net/rds/ib_frmr.c:430)
rds_ib_get_mr (net/rds/ib_rdma.c:615)
__rds_rdma_map (net/rds/rdma.c:295)
rds_cmsg_rdma_map (net/rds/rdma.c:860)
rds_sendmsg (net/rds/send.c:1363)
____sys_sendmsg
do_syscall_64
Add a check in rds_ib_get_mr() that verifies ic, i_cm_id, and qp are all
non-NULL before proceeding with FRMR registration, mirroring the guard
already present in rds_ib_post_inv(). Return -ENODEV when the connection
is not ready, which the existing error handling in rds_cmsg_send() converts
to -EAGAIN for userspace retry and triggers rds_conn_connect_if_down() to
start the connection worker. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: EC: clean up handlers on probe failure in acpi_ec_setup()
When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware
platforms, it has already started the EC and installed the address
space handler with the struct acpi_ec pointer as handler context.
However, acpi_ec_setup() propagates the error without any cleanup.
The caller acpi_ec_add() then frees the struct acpi_ec for non-boot
instances, leaving a dangling handler context in ACPICA.
Any subsequent AML evaluation that accesses an EC OpRegion field
dispatches into acpi_ec_space_handler() with the freed pointer,
causing a use-after-free:
BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289)
Write of size 8 at addr ffff88800721de38 by task init/1
Call Trace:
<TASK>
mutex_lock (kernel/locking/mutex.c:289)
acpi_ec_space_handler (drivers/acpi/ec.c:1362)
acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293)
acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246)
acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509)
acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700)
acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327)
acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392)
</TASK>
Allocated by task 1:
acpi_ec_alloc (drivers/acpi/ec.c:1424)
acpi_ec_add (drivers/acpi/ec.c:1692)
Freed by task 1:
kfree (mm/slub.c:6876)
acpi_ec_add (drivers/acpi/ec.c:1751)
The bug triggers on reduced-hardware EC platforms (ec->gpe < 0)
when the GPIO IRQ provider defers probing. Once the stale handler
exists, any unprivileged sysfs read that causes AML to touch an
EC OpRegion (battery, thermal, backlight) exercises the dangling
pointer.
Fix this by calling ec_remove_handlers() in the error path of
acpi_ec_setup() before clearing first_ec. ec_remove_handlers()
checks each EC_FLAGS_* bit before acting, so it is safe to call
regardless of how far ec_install_handlers() progressed:
-ENODEV (handler not installed): only calls acpi_ec_stop()
-EPROBE_DEFER (handler installed): removes handler, stops EC |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: fix uninitialized padding leak in NFULA_PAYLOAD
__build_packet_message() manually constructs the NFULA_PAYLOAD netlink
attribute using skb_put() and skb_copy_bits(), bypassing the standard
nla_reserve()/nla_put() helpers. While nla_total_size(data_len) bytes
are allocated (including NLA alignment padding), only data_len bytes
of actual packet data are copied. The trailing nla_padlen(data_len)
bytes (1-3 when data_len is not 4-byte aligned) are never initialized,
leaking stale heap contents to userspace via the NFLOG netlink socket.
Replace the manual attribute construction with nla_reserve(), which
handles the tailroom check, header setup, and padding zeroing via
__nla_reserve(). The subsequent skb_copy_bits() fills in the payload
data on top of the properly initialized attribute. |
| UAF vulnerability in the communication module.
Impact: Successful exploitation of this vulnerability may affect availability. |
| UAF vulnerability in the communication module.
Impact: Successful exploitation of this vulnerability may affect availability. |
| Race condition vulnerability in the power consumption statistics module.
Impact: Successful exploitation of this vulnerability may affect availability. |
| Boundary-unlimited vulnerability in the application read module.
Impact: Successful exploitation of this vulnerability may affect availability. |
| The BlockArt Blocks plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'clientId' block attribute in all versions up to, and including, 2.2.15. This is due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| In Mesa before 25.3.6 and 26 before 26.0.1, out-of-bounds memory access can occur in WebGPU because the amount of to-be-allocated data depends on an untrusted party, and is then used for alloca. |
| Varnish Cache 9 before 9.0.1 and Varnish Enterprise before 6.0.16r11 allows a "workspace overflow" denial of service (daemon panic) for certain amounts of prefetched data. The setup of an HTTP/2 session starts with a speculative HTTP/1 transport, and upon upgrading to h2 the HTTP/1 request is repurposed as stream zero. During the upgrade, a buffer allocation is made to reserve space to send frames to the client. This allocation would split the original workspace, and depending on the amount of prefetched data, the next fetch could perform a pipelining operation that would run out of workspace. |
| Varnish Enterprise before 6.0.16r12 allows a "workspace overflow" denial of service (daemon panic) for shared VCL. The headerplus.write_req0() function from vmod_headerplus updates the underlying req0, which is normally the original read-only request from which req is derived (readable and writable from VCL). This is useful in the active VCL, after amending req, to prepare a refined req0 before switching to a different VCL with the return (vcl(<label>)) action. This is for example how the Varnish Controller operates shared VCL deployments. If the amended req contained too many header fields for req0, this would have resulted in a workspace overflow that would in turn trigger a panic and crash the Varnish Enterprise server. This could be used as a Denial of Service attack vector by malicious clients. |
| The ZTE ZXEDM iEMS product has a password reset vulnerability for any user.Because the management of the cloud EMS portal does not properly control access to the user list acquisition function, attackers can read all user list information through the user list interface. Attackers can reset the passwords of obtained user information, causing risks such as unauthorized operations. |
| Integer overflow or wraparound vulnerability in Samsung Open Source Escargot allows undefined behavior.This issue affects Escargot: 97e8115ab1110bc502b4b5e4a0c689a71520d335. |
| A Code Injection and Missing Authentication vulnerability in Google Agent Development Kit (ADK) versions 1.7.0 (and 2.0.0a1) through 1.28.1 (and 2.0.0a2) on Python (OSS), Cloud Run, and GKE allows an unauthenticated remote attacker to execute arbitrary code on the server hosting the ADK instance.
This vulnerability was patched in versions 1.28.1 and 2.0.0a2.
Customers need to redeploy the upgraded ADK to their production environments. In addition, if they are running ADK Web locally, they also need to upgrade their local instance. |
| The Optimole – Optimize Images in Real Time plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via URL paths in versions up to, and including, 4.2.3 This is due to insufficient output escaping on user-supplied URL paths in the get_current_url() function, which are inserted into JavaScript code via str_replace() without proper JavaScript context escaping in the replace_content() function. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| An attacker can control a server-side HTTP request by supplying a crafted URL, causing the server to initiate requests to arbitrary destinations. This behavior may be exploited to probe internal network services, access otherwise unreachable endpoints (e.g., cloud metadata services), or bypass network access controls, potentially leading to sensitive information disclosure and further compromise of the internal environment. |
| A vulnerability was detected in 1Panel-dev MaxKB up to 2.2.1. This vulnerability affects the function StaticHeadersMiddleware of the file apps/common/middleware/static_headers_middleware.py of the component Public Chat Interface. The manipulation of the argument Name results in cross site scripting. The attack may be launched remotely. The exploit is now public and may be used. Upgrading to version 2.8.0 is able to resolve this issue. The patch is identified as 026a2d623e2aa5efa67c4834651e79d5d7cab1da. It is recommended to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| A flaw has been found in 1Panel-dev MaxKB up to 2.6.1. This issue affects some unknown processing of the file apps/common/middleware/chat_headers_middleware.py of the component ChatHeadersMiddleware. This manipulation of the argument Name causes cross site scripting. Remote exploitation of the attack is possible. Upgrading to version 2.8.0 is capable of addressing this issue. Patch name: 026a2d623e2aa5efa67c4834651e79d5d7cab1da. Upgrading the affected component is advised. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
