| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FacturaScripts is an open source accounting and invoicing software. In 2025.92 and earlier, a stored Cross-Site Scripting (XSS) vulnerability exists in the product search modal of sales (Core/Lib/AjaxForms/SalesModalHTML.php) and purchases documents (Core/Lib/AjaxForms/PurchasesModalHTML.php). An authenticated user with access to the warehouse module can create a product with a malicious reference that executes arbitrary JavaScript in the browser of any other user who opens the product search modal inside an invoice, order, or delivery note. |
| In the Linux kernel, the following vulnerability has been resolved:
net: remove WARN_ON_ONCE when accessing forward path array
Although unlikely, recent support for IPIP tunnels increases chances of
reaching this WARN_ON_ONCE if userspace manages to build a sufficiently
long forward path.
Remove it. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: fix IO hang with degraded array with llbitmap
When llbitmap bit state is still unwritten, any new write should force
rcw, as bitmap_ops->blocks_synced() is checked in handle_stripe_dirtying().
However, later the same check is missing in need_this_block(), causing
stripe to deadloop during handling because handle_stripe() will decide
to go to handle_stripe_fill(), meanwhile need_this_block() always return
0 and nothing is handled. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: appletb-kbd: run inactivity autodim from workqueues
The autodim code in hid-appletb-kbd takes backlight_device->ops_lock
via backlight_device_set_brightness() -> mutex_lock() from two
different atomic contexts:
* appletb_inactivity_timer() is a struct timer_list callback, so it
runs in softirq context. Every expiry triggers
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591
Call Trace:
<IRQ>
__might_resched
__mutex_lock
backlight_device_set_brightness
appletb_inactivity_timer
call_timer_fn
run_timer_softirq
* reset_inactivity_timer() is called from appletb_kbd_hid_event() and
appletb_kbd_inp_event(). On real USB hardware these run in
softirq/IRQ context (URB completion and input-event dispatch).
When the Touch Bar has already been dimmed or turned off, the
reset path calls backlight_device_set_brightness() directly to
restore brightness, producing the same warning.
Both call sites hit the same mutex_lock()-from-atomic bug. Fix them
together by moving the blocking work onto the system workqueue:
* Convert the inactivity timer from struct timer_list to
struct delayed_work; the callback (appletb_inactivity_work) now
runs in process context where mutex_lock() is legal.
* Add a dedicated struct work_struct restore_brightness_work and have
reset_inactivity_timer() schedule it instead of calling
backlight_device_set_brightness() directly.
Cancel both works synchronously during driver tear-down alongside the
existing backlight reference drop.
The semantics are unchanged (same delays, same state transitions on
dim, turn-off and user activity); only the execution context of the
sleeping call changes. The timer field and callback are renamed to
match their new type; reset_inactivity_timer() keeps its name because
it is invoked from input event paths that read naturally as "reset
the inactivity timer". |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix accept queue count leak on transport mismatch
virtio_transport_recv_listen() calls sk_acceptq_added() before
vsock_assign_transport(). If vsock_assign_transport() fails or
selects a different transport, the error path returns without
calling sk_acceptq_removed(), permanently incrementing
sk_ack_backlog.
After approximately backlog+1 such failures, sk_acceptq_is_full()
returns true, causing the listener to reject all new connections.
Fix by moving sk_acceptq_added() to after the transport validation,
matching the pattern used by vmci_transport and hyperv_transport. |
| An authorization issue was addressed with improved state management. This issue is fixed in iOS 15.8.4 and iPadOS 15.8.4, iOS 16.7.11 and iPadOS 16.7.11, iOS 18.3.1 and iPadOS 18.3.1, iPadOS 17.7.5. A physical attack may disable USB Restricted Mode on a locked device. Apple is aware of a report that this issue may have been exploited in an extremely sophisticated attack against specific targeted individuals. |
| Northern.tech Mender Enterprise Server before 4.1.1 has Incorrect Access Control. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: inside-secure/eip93 - unregister only available algorithm
EIP93 has an options register. This register indicates which crypto
algorithms are implemented in silicon. Supported algorithms are
registered on this basis. Unregister algorithms on the same basis.
Currently, all algorithms are unregistered, even those not supported
by HW. This results in panic on platforms that don't have all options
implemented in silicon. |
| In the Linux kernel, the following vulnerability has been resolved:
mctp i2c: initialise event handler read bytes
Set a 0xff value for i2c reads of an mctp-i2c device. Otherwise reads
will return "val" from the i2c bus driver. For i2c-aspeed and
i2c-npcm7xx that is a stack uninitialised u8.
Tested with "i2ctransfer -y 1 r10@0x34" where 0x34 is a mctp-i2c
instance, now it returns all 0xff. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: intel-dg: Fix accessing regions before setting nregions
The regions array is counted by nregions, but it's set only after
accessing it:
[] UBSAN: array-index-out-of-bounds in drivers/mtd/devices/mtd_intel_dg.c:750:15
[] index 0 is out of range for type '<unknown> [*]'
Fix it by also fixing an undesired behavior: the loop silently ignores
ENOMEM and continues setting the other entries. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling
The recent commit 1010b4c012b0 ("powerpc/eeh: Make EEH driver device
hotplug safe") restructured the EEH driver to improve synchronization
with the PCI hotplug layer.
However, it inadvertently moved pci_lock_rescan_remove() outside its
intended scope in eeh_handle_normal_event(), leading to broken PCI
error reporting and improper EEH event triggering. Specifically,
eeh_handle_normal_event() acquired pci_lock_rescan_remove() before
calling eeh_pe_bus_get(), but eeh_pe_bus_get() itself attempts to
acquire the same lock internally, causing nested locking and disrupting
normal EEH event handling paths.
This patch adds a boolean parameter do_lock to _eeh_pe_bus_get(),
with two public wrappers:
eeh_pe_bus_get() with locking enabled.
eeh_pe_bus_get_nolock() that skips locking.
Callers that already hold pci_lock_rescan_remove() now use
eeh_pe_bus_get_nolock() to avoid recursive lock acquisition.
Additionally, pci_lock_rescan_remove() calls are restored to the correct
position—after eeh_pe_bus_get() and immediately before iterating affected
PEs and devices. This ensures EEH-triggered PCI removes occur under proper
bus rescan locking without recursive lock contention.
The eeh_pe_loc_get() function has been split into two functions:
eeh_pe_loc_get(struct eeh_pe *pe) which retrieves the loc for given PE.
eeh_pe_loc_get_bus(struct pci_bus *bus) which retrieves the location
code for given bus.
This resolves lockdep warnings such as:
<snip>
[ 84.964298] [ T928] ============================================
[ 84.964304] [ T928] WARNING: possible recursive locking detected
[ 84.964311] [ T928] 6.18.0-rc3 #51 Not tainted
[ 84.964315] [ T928] --------------------------------------------
[ 84.964320] [ T928] eehd/928 is trying to acquire lock:
[ 84.964324] [ T928] c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40
[ 84.964342] [ T928]
but task is already holding lock:
[ 84.964347] [ T928] c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40
[ 84.964357] [ T928]
other info that might help us debug this:
[ 84.964363] [ T928] Possible unsafe locking scenario:
[ 84.964367] [ T928] CPU0
[ 84.964370] [ T928] ----
[ 84.964373] [ T928] lock(pci_rescan_remove_lock);
[ 84.964378] [ T928] lock(pci_rescan_remove_lock);
[ 84.964383] [ T928]
*** DEADLOCK ***
[ 84.964388] [ T928] May be due to missing lock nesting notation
[ 84.964393] [ T928] 1 lock held by eehd/928:
[ 84.964397] [ T928] #0: c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40
[ 84.964408] [ T928]
stack backtrace:
[ 84.964414] [ T928] CPU: 2 UID: 0 PID: 928 Comm: eehd Not tainted 6.18.0-rc3 #51 VOLUNTARY
[ 84.964417] [ T928] Hardware name: IBM,9080-HEX POWER10 (architected) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_022) hv:phyp pSeries
[ 84.964419] [ T928] Call Trace:
[ 84.964420] [ T928] [c0000011a7157990] [c000000001705de4] dump_stack_lvl+0xc8/0x130 (unreliable)
[ 84.964424] [ T928] [c0000011a71579d0] [c0000000002f66e0] print_deadlock_bug+0x430/0x440
[ 84.964428] [ T928] [c0000011a7157a70] [c0000000002fd0c0] __lock_acquire+0x1530/0x2d80
[ 84.964431] [ T928] [c0000011a7157ba0] [c0000000002fea54] lock_acquire+0x144/0x410
[ 84.964433] [ T928] [c0000011a7157cb0] [c0000011a7157cb0] __mutex_lock+0xf4/0x1050
[ 84.964436] [ T928] [c0000011a7157e00] [c000000000de21d8] pci_lock_rescan_remove+0x28/0x40
[ 84.964439] [ T928] [c0000011a7157e20] [c00000000004ed98] eeh_pe_bus_get+0x48/0xc0
[ 84.964442] [ T928] [c0000011a7157e50] [c00000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fsl: fix controller deregistration
Make sure to deregister the controller before releasing underlying
resources like DMA during driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: only purge non-released claims
When batadv_bla_purge_claims() goes through the list of claims, it is only
traversing the hash list with an rcu_read_lock(). Due to a potential
parallel batadv_claim_put(), it can happen that it encounters a claim which
was actually in the process of being released+freed by
batadv_claim_release(). In this case, backbone_gw is set to NULL before the
delayed RCU kfree is started. Calling batadv_bla_claim_get_backbone_gw() is
then no longer allowed because it would cause a NULL-ptr derefence.
To avoid this, only claims with a valid reference counter must be purged.
All others are already taken care of. |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to a denial of service when executing a specially crafted query with a small statement heap. |
| A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setPasswordCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Such manipulation of the argument admpass leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used. |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to running out of memory when executing certain queries with MDC tables. |
| IBM i 7.6, 7.5, 7.4, and 7.3 s vulnerable to a denial-of-service attack due to uncontrolled recursion in the Integrated Language Environment (ILE) compiler. An authenticated attacker could exploit this vulnerability by compiling specially crafted source code containing a specific combination of statements. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/gcs: Fix error handling in arch_set_shadow_stack_status()
alloc_gcs() returns an error-encoded pointer on failure, which comes
from do_mmap(), not NULL.
The current NULL check fails to detect errors, which could lead to using
an invalid GCS address.
Use IS_ERR_VALUE() to properly detect errors, consistent with the
check in gcs_alloc_thread_stack(). |
| In the Linux kernel, the following vulnerability has been resolved:
soc: mediatek: svs: Fix memory leak in svs_enable_debug_write()
In svs_enable_debug_write(), the buf allocated by memdup_user_nul()
is leaked if kstrtoint() fails.
Fix this by using __free(kfree) to automatically free buf, eliminating
the need for explicit kfree() calls and preventing leaks.
[Angelo: Added missing cleanup.h inclusion] |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: parsers: Fix memory leak in mtd_parser_tplink_safeloader_parse()
The function mtd_parser_tplink_safeloader_parse() allocates buf via
mtd_parser_tplink_safeloader_read_table(). If the allocation for
parts[idx].name fails inside the loop, the code jumps to the err_free
label without freeing buf, leading to a memory leak.
Fix this by freeing the temporary buffer buf in the err_free label.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
