| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In VBMeta, there is a possible way to modify and resign VBMeta using a test key, assuming the original image was previously signed with the same key. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| An attacker can send a web request that causes unlimited memory allocation in the internal web server, leading to a denial of service. The internal web server is disabled by default. |
| OS Command Injection Remote Code Execution Vulnerability in API in Progress ADC Products allows an authenticated attacker with “Geo Administration” permissions to execute arbitrary commands on the LoadMaster appliance by exploiting unsanitized input in the 'addcountry' command |
| OS Command Injection Remote Code Execution Vulnerability in API in Progress ADC Products allows an authenticated attacker with “All” permissions to execute arbitrary commands on the LoadMaster appliance by exploiting unsanitized input in the 'killsession' command |
| A vulnerability was determined in Qibo CMS 1.0. Affected by this issue is some unknown functionality of the file /index/image/headers. Executing a manipulation of the argument starts can lead to server-side request forgery. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| OS Command Injection Remote Code Execution Vulnerability in API in Progress ADC Products allows an authenticated attacker with “VS Administration” permissions to execute arbitrary commands on the LoadMaster appliance by exploiting unsanitized input in the 'aclcontrol' command |
| OS Command Injection Remote Code Execution Vulnerability in UI in Progress ADC Products allows an authenticated attacker with “All” permissions to execute arbitrary commands on the LoadMaster appliance by exploiting unsanitized input in a custom WAF rule file during the file upload process. |
| An improper access control vulnerability in the canonical-livepatch snap client prior to version 10.15.0 allows a local unprivileged user to obtain a sensitive, root-level authentication token by sending an unauthenticated request to the livepatchd.sock Unix domain socket. This vulnerability is exploitable on systems where an administrator has already enabled the Livepatch client with a valid Ubuntu Pro subscription. This token allows an attacker to access Livepatch services using the victim's credentials, as well as potentially cause issues to the Livepatch server. |
| A vulnerability was identified in Z-BlogPHP 1.7.5. This affects the function App::UnPack of the file /zb_users/plugin/AppCentre/app_upload.php of the component ZBA File Handler. The manipulation leads to unrestricted upload. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in erponline.xyz ERP Online up to 4.0.0. This vulnerability affects unknown code of the component Inventory Edit Item Page. The manipulation of the argument Item Name results in cross site scripting. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| pip handles concatenated tar and ZIP files as ZIP files regardless of filename or whether a file is both a tar and ZIP file. This behavior could result in confusing installation behavior, such as installing "incorrect" files according to the filename of the archive. New behavior only proceeds with installation if the file identifies uniquely as a ZIP or tar archive, not as both. |
| A weakness has been identified in Pagekit CMS up to 1.0.18. This issue affects the function evaluate of the file app/modules/view/src/PhpEngine.php of the component StringStorage Template Handler. This manipulation causes improper neutralization of directives in dynamically evaluated code. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| OpenAEV is an open source platform allowing organizations to plan, schedule and conduct cyber adversary simulation campaign and tests. Starting in version 1.0.0 and prior to version 2.0.13, OpenAEV's password reset implementation contains multiple security weaknesses that together allow reliable account takeover. The primary issue is that password reset tokens do not expire. Once a token is generated, it remains valid indefinitely, even if significant time has passed or if newer tokens are issued for the same account. This allows an attacker to accumulate valid password reset tokens over time and reuse them at any point in the future to reset a victim’s password. A secondary weakness is that password reset tokens are only 8 digits long. While an 8-digit numeric token provides 100,000,000 possible combinations (which is secure enough), the ability to generate large numbers of valid tokens drastically reduces the required number of attempts to guess a valid password reset token. For example, if an attacker generates 2,000 valid tokens, the brute-force effort is reduced to approximately 50,000 attempts, which is a trivially achievable number of requests for an automated attack. (100 requests per second can mathematically find a valid password reset token in 500 seconds.) By combining these flaws, an attacker can mass-generate valid password reset tokens and then brute-force them efficiently until a match is found, allowing the attacker to reset the victim’s password to a value of their choosing. The original password is not required, and the attack can be performed entirely without authentication. This vulnerability enables full account takeover that leads to platform compromise. An unauthenticated remote attacker can reset the password of any registered user account and gain complete access without authentication. Because user email addresses are exposed to other users by design, a single guessed or observed email address is sufficient to compromise even administrator accounts with non-guessable email addresses. This design flaw results in a reliable and scalable account takeover vulnerability that affects any registered user account in the system. Note: The vulnerability does not require OpenAEV to have the email service configured. The exploit does not depend on the target email address to be a real email address. It just needs to be registered to OpenAEV. Successful exploitation allows an unauthenticated remote attacker to access sensitive data (such as the Findings section of a simulation), modify payloads executed by deployed agents to compromise all hosts where agents are installed (therefore the Scope is changed). Users should upgrade to version 2.0.13 to receive a fix. |
| OpenAEV is an open source platform allowing organizations to plan, schedule and conduct cyber adversary simulation campaign and tests. Starting in version 1.11.0 and prior to version 2.0.13, the /api/reset endpoint behaves differently depending on whether the supplied username exists in the system. When a non-existent email is provided in the login parameter, the endpoint returns an HTTP 400 response (Bad Request). When a valid email is supplied, the endpoint responds with HTTP 200. This difference in server responses creates an observable discrepancy that allows an attacker to reliably determine which emails are registered in the application. By automating requests with a list of possible email addresses, an attacker can quickly build a list of valid accounts without any authentication. The endpoint should return a consistent response regardless of whether the username exists in order to prevent account enumeration. Version 2.0.13 fixes this issue. |
| Vexa is an open-source, self-hostable meeting bot API and meeting transcription API. Prior to 0.10.0-260419-1910, the Vexa transcription-collector service exposes an internal endpoint `GET /internal/transcripts/{meeting_id}` that returns transcript data for any meeting without any authentication or authorization checks. An unauthenticated attacker can enumerate all meeting IDs, access any user's meeting transcripts without credentials, and steal confidential business conversations, passwords, and/or PII. Version 0.10.0-260419-1910 patches the issue. |
| Having many concurrent transfers of the same RPZ can lead to inconsistent RPZ data, use after free and/or a crash of the recursor. Normally concurrent transfers of the same RPZ zone can only occur with a malfunctioning RPZ provider. |
| Vexa is an open-source, self-hostable meeting bot API and meeting transcription API. Prior to 0.10.0-260419-1910, the Vexa webhook feature allows authenticated users to configure an arbitrary URL that receives HTTP POST requests when meetings complete. The application performs no validation on the webhook URL, enabling Server-Side Request Forgery (SSRF). An authenticated attacker can set their webhook URL to target internal services (Redis, databases, admin panels), cloud metadata endpoints (AWS/GCP credential theft), and/or localhost services. Version 0.10.0-260419-1910 patches the issue. |
| Magento Long Term Support (LTS) is an unofficial, community-driven project provides an alternative to the Magento Community Edition e-commerce platform with a high level of backward compatibility. Prior to version 20.17.0, PHP functions such as `getimagesize()`, `file_exists()`, and `is_readable()` can trigger deserialization when processing `phar://` stream wrapper paths. OpenMage LTS uses these functions with potentially controllable file paths during image validation and media handling. An attacker who can upload a malicious phar file (disguised as an image) and trigger one of these functions with a `phar://` path can achieve arbitrary code execution. Version 20.17.0 patches the issue. |
| Magento Long Term Support (LTS) is an unofficial, community-driven project provides an alternative to the Magento Community Edition e-commerce platform with a high level of backward compatibility. Prior to version 20.17.0, the Dataflow module in OpenMage LTS uses a weak blacklist filter (`str_replace('../', '', $input)`) to prevent path traversal attacks. This filter can be bypassed using patterns like `..././` or `....//`, which after the replacement still result in `../`. An authenticated administrator can exploit this to read arbitrary files from the server filesystem. Version 20.17.0 patches the issue. |
| KissFFT before commit 8a8e66e contains an integer overflow vulnerability in the kiss_fftndr_alloc() function in kiss_fftndr.c where the allocation size calculation dimOther*(dimReal+2)*sizeof(kiss_fft_scalar) overflows signed 32-bit integer arithmetic before being widened to size_t, causing malloc() to allocate an undersized buffer. Attackers can trigger heap buffer overflow by providing crafted dimensions that cause the multiplication to exceed INT_MAX, allowing writes beyond the allocated buffer region when kiss_fftndr() processes the data. |
