| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Versal™ AI Edge Series Gen 2 Peripheral Protection Unit (XPPU) for the inter-processor interrupt (IPI) buffers does not block unauthorized access as expected. This allows processors in the SoC with any IPI channel access the ability to both read and write to the entire IPI buffer register space as well as the IPI no-buffer register control space. |
| Improper validation of specified quantities in input within AMD Power Management Firmware (PMFW) could allow a local attacker to pass unsanitized input, potentially resulting in a system crash or denial of service. |
| A transient execution vulnerability in some AMD processors may allow an attacker with the ability to execute code on the system to infer data in the L1D cache, potentially resulting in the leakage of sensitive information across privileged boundaries. |
| Insufficient parameter sanitization in AMD Secure Processor (ASP) TEE DrvSys could allow an attacker with local access to the Trusted Execution Environment (TEE) interface or Trusted Application (TA) to cause an out-of-bounds write, potentially resulting in a loss of platform integrity or denial of service. |
| In OpenStack Nova before 33.0.2, the server create API does not strip certain hint data. The resulting instance has no Placement allocation. |
| Missing Lock Bit Protection in the Northbridge IO (NBIO) could allow a privileged attacker to use an intentionally disabled device as part of a remapping attack potentially impacting data confidentiality, integrity, or availability. |
| Improper access control in Microsoft Exchange Server allows an authorized attacker to perform spoofing over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: reject oversized nested action attrs
Open vSwitch stores generated flow actions as nlattrs, whose nla_len
field is u16. Commit a1e64addf3ff ("net: openvswitch: remove
misbehaving actions length check") allowed the total sw_flow_actions
stream to grow beyond 64 KiB, which is valid, but also removed the last
guard preventing a generated nested action attribute from exceeding
U16_MAX.
An oversized generated container can thus be closed with a truncated
nla_len. A later dump or teardown then walks a structurally different
stream than the one that was validated. In particular, an oversized
nested CLONE/CT action may cause subsequent bytes in the generated
stream to be interpreted as independent actions.
Keep the larger total-action-stream behavior, but make nested action
close reject generated containers that do not fit in nla_len, and return
the error through all callers. For recursive SAMPLE, CLONE, DEC_TTL, and
CHECK_PKT_LEN builders, trim resource-owning action-list tails in reverse
construction order before discarding failed wrappers, so resources copied
into the rejected tails are released before the wrappers are removed.
Most failed outer wrappers are discarded by truncating actions_len after
child resources have been released. CHECK_PKT_LEN also trims its parent
after branch resources are gone. SET/TUNNEL close failures unwind their
known tun_dst ownership directly, and SET_TO_MASKED has no external
ownership and truncates on close failure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/hyperv: validate resolution_count and fix WIN8 fallback
A SYNTHVID_RESOLUTION_RESPONSE with resolution_count > 64 walks past
the supported_resolution[SYNTHVID_MAX_RESOLUTION_COUNT] array in the
parse loop. Bound resolution_count against the array size, folded
into the existing zero-check.
When the WIN10 resolution probe fails, the caller in
hyperv_connect_vsp() left hv->screen_*_max / preferred_* unpopulated,
which sets mode_config.max_width / max_height to 0 and makes
drm_internal_framebuffer_create() reject every userspace framebuffer
with -EINVAL. The pre-WIN10 branch had the same gap for
preferred_width / preferred_height. Use a single post-probe fallback
guarded by screen_width_max == 0 so both paths converge on the WIN8
defaults. |
| CAI Content Credentials is affected by an Integer Overflow or Wraparound vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction. |
| IBM App Connect Enterprise 13.0.1.0 through 13.0.8.2 could allow a remote attacker to perform unauthorized actions due to missing anti-clickjacking controls. |
| IBM API Connect 10.0.8.0 through 10.0.8.12 and 12.1.0.0 through 12.1.1.2 could allow a remote authenticated attacker to bypass security restrictions due to improper handling of case sensitivity. An access restriction is not applied consistently to all variations of the input, which could allow it to be circumvented and unauthorized emails to be sent. |
| Heap-based buffer overflow in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Buffer over-read in Windows Kernel allows an authorized attacker to disclose information locally. |
| Heap-based buffer overflow in Windows Storport Miniport Driver allows an unauthorized attacker to elevate privileges with a physical attack. |
| Numeric truncation error in Windows SMB allows an authorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix eswitch mode block underflow on IPsec acquire SA
mlx5e_xfrm_add_state() handles acquire-flow temporary SAs by allocating
software state and skipping hardware offload setup.
That path jumps to the common success label before taking the eswitch mode
block. After tunnel-mode validation was moved earlier, the common success
label unconditionally calls mlx5_eswitch_unblock_mode(). For acquire SAs,
this decrements esw->offloads.num_block_mode without a matching increment.
Return directly after installing the acquire SA offload handle, so only the
paths that successfully called mlx5_eswitch_block_mode() call the matching
unblock. |
| The Export and Import Users and Customers plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 2.7.5 via the plugin's own export and re-import workflow. The vulnerability exists because of a CSV escape-character mismatch between the exporter and the importer: class-csvwriter.php writes cells with fputcsv() using PHP's default backslash (\) escape character, while class-csvreader.php parses the same file with fgetcsv() using a double-quote (") as the escape character. As a result, a crafted value stored in a Subscriber's Biographical Info field — containing a backslash-quote sequence followed by a newline — is written as a single quoted CSV field but parsed back as two separate rows on import. The injected second row is then processed by hf_create_customer() as a new user record whose user_login, user_pass, user_email, and role are entirely attacker-controlled, allowing the creation of an arbitrary Administrator account. This makes it possible for authenticated attackers with Subscriber-level access and above to escalate their privileges to Administrator. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: event: Fix event FIFO reset race
`iio_event_getfd()` creates the event file descriptor with
`anon_inode_getfd()`, which allocates a new fd, creates the anonymous
file and installs it in the process fd table before returning to the
caller.
The IIO code resets the event FIFO after `anon_inode_getfd()` has returned,
but before `IIO_GET_EVENT_FD_IOCTL` has copied the fd number to userspace.
But since fd tables are shared between threads, another thread can guess
the newly allocated fd number and issue a `read()` on it as soon as the fd
has been installed.
This means the `kfifo_to_user()` in `iio_event_chrdev_read()` can run in
parallel with the `kfifo_reset_out()` in `iio_event_getfd()`.
The kfifo documentation says that `kfifo_reset_out()` is only safe when it
is called from the reader thread and there is only one concurrent reader.
Otherwise it is dangerous and must be handled in the same way as
`kfifo_reset()`.
If that happens, `kfifo_to_user()` can advance the FIFO `out` index based
on state from before the reset, after the reset has already moved the `out`
index to the current `in` index. That can leave the FIFO with an `out`
index past the `in` index. A later `read()` can then see an underflowed
FIFO length and copy more data than the event FIFO buffer contains. This
can result in an out-of-bounds read and leak adjacent kernel memory to
userspace.
Move the FIFO reset before `anon_inode_getfd()`. At that point the event fd is
marked busy, but the new fd has not been installed yet, so userspace cannot
access it while the FIFO is reset. |
| A flaw was found in xdgmime. A heap-based buffer overflow can be triggered in _xdg_mime_magic_parse_magic_line() in the xdgmimemagic.c file on little-endian systems when an attacker-controlled MIME magic file in a user-writable XDG data location (e.g., in the $XDG_DATA_HOME/mime/magic path) is parsed by an application performing MIME type detection (e.g., via g_content_type_guess()). When performing byte-swap, incorrect pointer arithmetic on the write side causes an out-of-bounds write of 2 bytes, resulting in an application crash or memory corruption. |