| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Cisco Secure Access Control Server (ACS) 4.x for Windows uses the client's IP address and the server's port number to grant access to an HTTP server port for an administration session, which allows remote attackers to bypass authentication via various methods, aka "ACS Weak Session Management Vulnerability." |
| Cisco CBOS 2.3.0.053 sends output of the "sh nat" (aka "show nat") command to the terminal of the next user who attempts to connect to the router via telnet, which could allow that user to obtain sensitive information. |
| Unspecified vulnerability in the SSL certificate checking functionality in Cisco CiscoWorks Management Center for IDS Sensors (IDSMC) 2.0 and 2.1, and Monitoring Center for Security (Security Monitor or Secmon) 1.1 through 2.0 and 2.1, allows remote attackers to spoof a Cisco Intrusion Detection Sensor (IDS) or Intrusion Prevention System (IPS). |
| The command line interface (CLI) in Cisco Unified CallManager (CUCM) 5.0(1) through 5.0(3a) allows local users to overwrite arbitrary files by redirecting a command's output to a file or folder, aka bug CSCse31704. |
| Cisco IOS XR, when configured for Multi Protocol Label Switching (MPLS) and running on Cisco CRS-1 or Cisco 12000 series routers, allows remote attackers to cause a denial of service (Line card crash) via certain MPLS packets, as identified by Cisco bug ID CSCsc77475. |
| Cross-site scripting (XSS) vulnerability in Cisco CallManager 3.3 before 3.3(5)SR3, 4.1 before 4.1(3)SR4, 4.2 before 4.2(3), and 4.3 before 4.3(1), allows remote attackers to inject arbitrary web script or HTML via the (1) pattern parameter in ccmadmin/phonelist.asp and (2) arbitrary parameters in ccmuser/logon.asp, aka bugid CSCsb68657. |
| Cisco IOS 12.1(3) and 12.1(3)T allows remote attackers to read and modify device configuration data via the cable-docsis read-write community string used by the Data Over Cable Service Interface Specification (DOCSIS) standard. |
| Cisco Security Monitoring, Analysis and Response System (CS-MARS) before 4.1.3 has an undocumented administrative account with a default password, which allows local users to gain privileges via the expert command. |
| Cisco VPN 3000 series concentrators and Cisco VPN 3002 Hardware Client 2.x.x through 3.6.7A allow remote attackers to cause a denial of service (slowdown and possibly reload) via a flood of malformed ICMP packets. |
| A vulnerability in the Internet Key Exchange version 1 (IKEv1) implementation of Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The attacker must have valid IKEv1 VPN credentials to exploit this vulnerability.
This vulnerability is due to improper validation of IKEv1 phase 2 parameters before the IPsec security association creation request is handed off to the hardware cryptographic accelerator of an affected device. An attacker could exploit this vulnerability by sending crafted IKEv1 messages to the affected device. A successful exploit could allow the attacker to cause the device to reload. |
| Tinycontrol LAN Controller v3 (LK3) firmware versions up to 1.58a (hardware v3.8) contain a missing authentication vulnerability in the stm.cgi endpoint. A remote, unauthenticated attacker can send crafted requests to forcibly reboot the device or restore factory settings, leading to a denial of service and configuration loss. |
| A vulnerability in Cisco NX-OS Software could allow an authenticated, local attacker with privileges to access the Bash shell to execute arbitrary code as root on an affected device.
This vulnerability is due to insufficient security restrictions when executing commands from the Bash shell. An attacker with privileges to access the Bash shell could exploit this vulnerability by executing a specific crafted command on the underlying operating system. A successful exploit could allow the attacker to execute arbitrary code with the privileges of root. |
| A vulnerability in the Intermediate System-to-Intermediate System (IS-IS) feature of Cisco NX-OS Software for Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an unauthenticated, adjacent attacker to cause the IS-IS process to unexpectedly restart, which could cause an affected device to reload.
This vulnerability is due to insufficient input validation when parsing an ingress IS-IS packet. An attacker could exploit this vulnerability by sending a crafted IS-IS packet to an affected device. A successful exploit could allow the attacker to cause the unexpected restart of the IS-IS process, which could cause the affected device to reload, resulting in a denial of service (DoS) condition.
Note: The IS-IS protocol is a routing protocol. To exploit this vulnerability, an attacker must be Layer 2-adjacent to the affected device. |
| A vulnerability in the web-based management interface of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface.
This vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid administrative credentials. |
| A vulnerability in the HTTP API subsystem of Cisco IOS XE Software could allow a remote attacker to inject commands that will execute with root privileges into the underlying operating system.
This vulnerability is due to insufficient input validation. An attacker with administrative privileges could exploit this vulnerability by authenticating to an affected system and performing an API call with crafted input. Alternatively, an unauthenticated attacker could persuade a legitimate user with administrative privileges who is currently logged in to the system to click a crafted link. A successful exploit could allow the attacker to execute arbitrary commands as the root user. |
| A vulnerability in the Network-Based Application Recognition (NBAR) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, causing a denial of service (DoS) condition.
This vulnerability is due to improper handling of malformed Control and Provisioning of Wireless Access Points (CAPWAP) packets. An attacker could exploit this vulnerability by sending malformed CAPWAP packets through an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition. |
| A vulnerability in the IPv6 Router Advertisement (RA) packet processing of Cisco Access Point Software could allow an unauthenticated, adjacent attacker to modify the IPv6 gateway on an affected device.
This vulnerability is due to a logic error in the processing of IPv6 RA packets that are received from wireless clients. An attacker could exploit this vulnerability by associating to a wireless network and sending a series of crafted IPv6 RA packets. A successful exploit could allow the attacker to temporarily change the IPv6 gateway of an affected device. This could also lead to intermittent packet loss for any wireless clients that are associated with the affected device. |
| A vulnerability in the Layer 2 Ethernet services of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause the line card network processor to reset, resulting in a denial of service (DoS) condition.
This vulnerability is due to the incorrect handling of specific Ethernet frames that are received on line cards that have the Layer 2 services feature enabled. An attacker could exploit this vulnerability by sending specific Ethernet frames through an affected device. A successful exploit could allow the attacker to cause the ingress interface network processor to reset, resulting in a loss of traffic over the interfaces that are supported by the network processor. Multiple resets of the network processor would cause the line card to reset, resulting in a DoS condition. |
| A vulnerability in the Secure Copy Protocol (SCP) and SFTP feature of Cisco IOS XR Software could allow an authenticated, local attacker to create or overwrite files in a system directory, which could lead to a denial of service (DoS) condition. The attacker would require valid user credentials to perform this attack.
This vulnerability is due to a lack of proper validation of SCP and SFTP CLI input parameters. An attacker could exploit this vulnerability by authenticating to the device and issuing SCP or SFTP CLI commands with specific parameters. A successful exploit could allow the attacker to impact the functionality of the device, which could lead to a DoS condition. The device may need to be manually rebooted to recover.
Note: This vulnerability is exploitable only when a local user invokes SCP or SFTP commands at the Cisco IOS XR CLI. A local user with administrative privileges could exploit this vulnerability remotely. |
| A vulnerability in the CLI of the Cisco Integrated Management Controller (IMC) could allow an authenticated, local attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit this vulnerability, the attacker must have read-only or higher privileges on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted CLI command. A successful exploit could allow the attacker to elevate privileges to root. |
