| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: trigger: cancel reenable_work before freeing trigger
iio_trigger_notify_done_atomic() defers ->reenable() into
trig->reenable_work on the system workqueue, and the worker dereferences
the owning trigger through container_of(). Nothing cancels this work
before iio_trig_release() frees the trigger, so a worker armed by the
last in-flight IRQ can outlive the free and touch freed memory.
Cancel it at the top of iio_trig_release(), which every free path
reaches through the device core's final put_device().
Found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Require kernel access for text poke events
Perf events with exclude_kernel=1 can be opened without kernel perf
access. However, exclude_kernel does not suppress text-poke sideband
records. Every PERF_RECORD_TEXT_POKE is marked PERF_RECORD_MISC_KERNEL
and contains a raw kernel instruction address.
An unprivileged task can therefore open and mmap a task-local software
event with text_poke=1. Both opening a count-only tracepoint event and
configuring UDP GRO for ESP-in-UDP cause updates to inline static calls;
the observer receives the relocated addresses of the modified instructions.
For a known kernel image, any such address reveals the runtime kernel
text base despite KASLR.
Call perf_allow_kernel() whenever attr.text_poke is set, regardless of
exclude_kernel. Events that neither monitor kernel execution nor request
text-poke records retain their existing permissions. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: use one headroom snapshot for neighbour replies
vxlan_na_create() samples LL_RESERVED_SPACE() to size the reply skb and then
samples it again to reserve headroom. A concurrent vxlan_changelink() can
update needed_headroom between the two reads, creating a TOCTOU race. The
second value can exceed the allocation and make the Ethernet header write out
of bounds.
The race is reproducible on the unpatched kernel. It occurred when
vxlan_na_create() generated a neighbour reply while vxlan_changelink() changed
the link headroom. KASAN caught a four-byte write two bytes beyond a 704-byte
skbuff_small_head allocation.
Snapshot the headroom once and use that value for both allocation and
reservation. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: prevent collapsing skbs across boundary in rtx queue
tcp_write_collapse_fence() sets TCP_SKB_CB(skb)->eor = 1 on
tcp_write_queue_tail(sk) to prevent skbs queued after a switch to
device encryption from being collapsed into earlier skbs.
The fence is a no-op if all earlier data has already been transmitted
when the switch happens: sk->sk_write_queue is empty. The not yet
acknowledged earlier skbs wait in sk->tcp_rtx_queue with eor 0.
On a subsequent retransmit or SACK shift, tcp_retrans_try_collapse() or
tcp_shift_skb_data() can then merge an skb queued after the switch into
one queued before it.
Both users of the fence are affected:
- psp: devices only encrypt skbs with skb->decrypted set. The merged skb
keeps decrypted = 0 from the earlier skb, so merged data sent after
psp_sock_assoc_set_tx() is retransmitted in cleartext.
- tls device offload: the merged skb straddles the start marker set in
tls_set_device_offload(). The software fallback (fill_sg_in() returns
-EINVAL) and the mlx5, nfp and funeth drivers cannot handle such an
skb and drop it. Every retransmit rebuilds the same skb, so the
connection stalls.
Fix this in two places, for defense in depth:
1. Fall back to tcp_rtx_queue_tail(sk) in tcp_write_collapse_fence()
when tcp_write_queue_tail(sk) is NULL.
2. Check !skb_cmp_decrypted(to, from) in tcp_skb_can_collapse(), as
tcp_skb_can_collapse_rx() does on receive. skb_shift(), which both
collapse paths call, already has a DEBUG_NET_WARN_ON_ONCE() for this
condition. |
| In the Linux kernel, the following vulnerability has been resolved:
bna: prevent IOC timer rearm during teardown
bna: prevent IOC timer rearm during teardown
bnad_pci_remove() and the probe disable_ioceth path call
timer_delete_sync() for ioc_timer, sem_timer and hb_timer, but not for
iocpf_timer. bnad_iocpf_timeout() then takes bnad->bna_lock after
free_netdev() has freed the struct bnad.
Deleting iocpf_timer last does not fix this. sem_timer and
iocpf_timer rearm each other: bnad_iocpf_sem_timeout() can arm
iocpf_timer, and bnad_iocpf_timeout() arms sem_timer from
bfa_ioc_hw_sem_get() when the semaphore is busy.
timer_delete_sync() only waits out its own callback.
bnad_ioceth_disable() can time out and leave that callback live.
Shut all four IOC timers down with timer_shutdown_sync() on both
paths, so a later mod_timer() is ignored.
This issue was identified during our ongoing static-analysis research
while reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix runtime PM leak in amdgpu_debugfs_test_ib_show()
amdgpu_debugfs_test_ib_show() resumes the device with
pm_runtime_get_sync() before taking the reset domain semaphore with
down_write_killable(). If the write lock acquisition is interrupted,
the function returns without calling pm_runtime_put_autosuspend(),
leaking the runtime PM reference acquired for the device and keeping
the GPU awake.
Drop the runtime PM reference on the interrupted down_write_killable()
error path before returning.
(cherry picked from commit ec30a576c2d4c0364549e6c04218f50704ef56c8) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: don't bump pin count on failed re-pin in nouveau_bo_pin_locked()
nouveau_bo_pin_locked() checks whether an already pinned BO is in a
memory domain compatible with a new pin request. When the domains are
incompatible, it sets -EBUSY but still calls ttm_bo_pin() before
returning.
Callers treat a failed nouveau_bo_pin() as not having acquired a new pin,
so the extra pin count is never decreased by a matching unpin.
This triggers the warning in ttm_bo_release():
WARN_ON_ONCE(bo->pin_count);
Found when fuzzing the nouveau driver with a modified Syzkaller:
WARNING: drivers/gpu/drm/ttm/ttm_bo.c:256 at ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256, CPU#1: syz.3.24/2212
Modules linked in:
CPU: 1 UID: 0 PID: 2212 Comm: syz.3.24 Not tainted 7.2.0 #24 PREEMPT(lazy)
nouveau 0000:01:00.0: gsp:msg fn:103 len:0x40/0x20 res:0x19 resp:0x19
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256
Code: 02 00 0f 85 51 01 00 00 48 8b 7b 08 e8 d2 20 01 00 e9 80 fd ff ff e8 d8 15 c0 fe 90 0f 0b 90 e9 e1 f8 ff ff e8 ca 15 c0 fe 90 <0f> 0b 90 e9 a4 f8 ff ff e8 bc 15 c0 fe be 03 00 00 00 4c 89 e7 e8
msg: 00000000: 05 00 d0 c1 04 00 f0 f1 01 30 00 00 2d 90 00 00 .........0..-...
RSP: 0018:ffffc9000f5cf710 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888018e5d2a8 RCX: ffffffff82bb1b36
RDX: ffff888017b68000 RSI: 0000000000000004 RDI: ffff888018e5d2a8
msg: 00000010: 19 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
RBP: ffff88801261c720 R08: 0000000000000001 R09: ffffed10031cba55
R10: ffff888018e5d2ab R11: 00000000000000f3 R12: ffff888018e5d290
R13: ffff888018e5d2d4 R14: ffff88801b219c18 R15: dffffc0000000000
FS: 0000000000000000(0000) GS:ffff8880e0f6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b31223ffc CR3: 0000000028e00005 CR4: 0000000000770ef0
PKRU: 80000000
Call Trace:
<TASK>
kref_put include/linux/kref.h:65 [inline]
ttm_bo_put drivers/gpu/drm/ttm/ttm_bo.c:325 [inline]
ttm_bo_fini+0x55/0x80 drivers/gpu/drm/ttm/ttm_bo.c:330
nouveau_gem_object_del+0xb2/0x1b0 drivers/gpu/drm/nouveau/nouveau_gem.c:90
drm_gem_object_free+0x5f/0x90 drivers/gpu/drm/drm_gem.c:1165
kref_put include/linux/kref.h:65 [inline]
__drm_gem_object_put include/drm/drm_gem.h:562 [inline]
drm_gem_object_put include/drm/drm_gem.h:575 [inline]
nouveau_abi16_chan_fini.constprop.0+0x44f/0x5a0 drivers/gpu/drm/nouveau/nouveau_abi16.c:195
nouveau 0000:01:00.0: syz.2.23[2209]: Unknown handle 0x00000000
nouveau_abi16_fini+0x1d0/0x340 drivers/gpu/drm/nouveau/nouveau_abi16.c:225
nouveau_drm_postclose+0x18b/0x3e0 drivers/gpu/drm/nouveau/nouveau_drm.c:1284
nouveau 0000:01:00.0: syz.2.23[2209]: validate_init
drm_file_free.part.0+0x6d6/0xb60 drivers/gpu/drm/drm_file.c:267
drm_file_free drivers/gpu/drm/drm_file.c:237 [inline]
drm_close_helper.isra.0+0x11a/0x160 drivers/gpu/drm/drm_file.c:290
drm_release+0x1ab/0x330 drivers/gpu/drm/drm_file.c:438
__fput+0x39c/0xa60 fs/file_table.c:512
nouveau 0000:01:00.0: syz.2.23[2209]: validate: -2
task_work_run+0x15a/0x230 kernel/task_work.c:233
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0x82b/0x25a0 kernel/exit.c:1009
do_group_exit+0xc2/0x280 kernel/exit.c:1152
get_signal+0x1d6e/0x1f30 kernel/signal.c:3046
arch_do_signal_or_restart+0x7d/0x6e0 arch/x86/kernel/signal.c:337
__exit_to_user_mode_loop kernel/entry/common.c:66 [inline]
exit_to_user_mode_loop+0xdf/0x440 kernel/entry/common.c:101
__exit_to_user_mode_prepare include/linux/irq-entry-common.h:207 [inline]
syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:230 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:318 [inline]
do_syscall_64+0x4f8/0x690 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RI
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: fix missing barrier between anon_vma init and vma->anon_vma publish
On arm64 server, we find that a task trying to grab the anon_vma lock
triggers hungtask.
INFO: task main:2354726 blocked for more than 120 seconds.
Tainted: G E 5.10.0-0021.aarch64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:main state:D stack: 0 pid:2354726 ppid:2350673 flags:0x00000a01
Call trace:
__switch_to+0x7c/0xbc
__schedule+0x3b4/0x8a0
schedule+0x50/0xe0
rwsem_down_write_slowpath+0x3cc/0x6cc
down_write+0x60/0x260
__anon_vma_prepare+0x6c/0x210
do_anonymous_page+0x258/0x660
handle_pte_fault+0x188/0x214
__handle_mm_fault+0x1b0/0x380
handle_mm_fault+0xf4/0x284
do_page_fault+0x19c/0x494
do_translation_fault+0xcc/0xf8
do_mem_abort+0x48/0xac
el0_da+0x44/0x80
el0_sync_handler+0x88/0xb4
el0_sync+0x160/0x180
After analyzing the vmcore, we found the anon_vma->root->rwsem.count is
-1. There is another anon_vma whose anon_vma->root->rwsem.count is 1, the
anon_vma->root->rwsem.owner shows the lock is held, but the stack of the
task shows the task doesn't hold the anon_vma lock.
After adding more debugging info, we found __anon_vma_prepare() reuses
anon_vma and triggers the UAF of anon_vma->root due to missing memory
barrier, leading to locking and unlocking two different anon_vma->root,
thus leading to an anon_vma will never be unlocked, and another anon_vma
couldn't be locked anymore.
This race requires two adjacent VMAs that are not merged but are
anon_vma-compatible (e.g., they differ in VMA_ACCESS_FLAGS that can be
changed by mprotect()). Two threads fault on each VMA concurrently, both
calling __anon_vma_prepare() with only mmap_lock held for reading.
THREAD A THREAD B
__anon_vma_prepare __anon_vma_prepare
find_mergeable_anon_vma() -> NULL
anon_vma = anon_vma_alloc();
anon_vma->root = anon_vma;
// the two stores may be reordered
vma->anon_vma = anon_vma;
// finds A's anon_vma
anon_vma = find_mergeable_anon_vma(vma);
anon_vma_lock_write(anon_vma);
// may still see the old root
down_write(&anon_vma->root->rwsem);
anon_vma_unlock_write(anon_vma);
// see the new root, never unlock old
up_write(&anon_vma->root->rwsem);
thread A triggers page fault and calls __anon_vma_prepare() to prepare
anon_vma for the faulting vma. __anon_vma_prepare() allocates and
initializes a new anon_vma, and then publishes it to the vma with a plain
store. anon_vma_prepare() only requires the mmap_lock to be held for
reading, so two threads can fault on adjacent VMAs at the same time.
While thread A publishes a new anon_vma, thread B could find the anon_vma
via find_mergeable_anon_vma() and then locks anon_vma->root->rwsem.
The store to anon_vma->root in anon_vma_alloc() and the store to
vma->anon_vma can be reordered. The anon_vma_lock_write() and spin_lock()
only provide acquire semantics, which do not prevent prior stores from
being reordered after them. The release semantics of the corresponding
spin_unlock() and anon_vma_unlock_write() come too late, the store to
vma->anon_vma is already published before they take effect. As a result,
thread B can observe the following order:
vma->anon_vma = anon_vma;
anon_vma->root = anon_vma;
The anon_vma slab is SLAB_TYPESAFE_BY_RCU, so a newly allocated anon_vma
may reuse memory from a previously freed one. The constructor
(anon_vma_ctor) does not reset anon_vma->root, and __put_anon_vma()
doesn't clear it either, so the old root value persists until
anon_vma_alloc() overwrites it. If that store isn't v
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
HID: alps: unregister DualPoint Stick input device on remove
alps_input_configured() allocates a second input device ("DualPoint
Stick") with input_allocate_device() and registers it, but the
alps_driver struct has no .remove handler and input2 is not tracked in
hdev->inputs. The default remove path (hid_hw_stop -> hidinput_disconnect)
only iterates hdev->inputs, so input2 is never unregistered and leaks
on every device removal.
Add a .remove handler that stops the device first (preventing URB
callbacks from touching input2 during teardown) and then unregisters
input2. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipconfig: bound DHCP option construction
ic_dhcp_init_options() appends the hostname (option 12), vendor-class
(option 60) and client-ID (option 61) options into the fixed 312-byte
bootp_pkt.exten[] buffer. Only the client-ID branch checked the
remaining space; the hostname and vendor-class writes were unbounded.
A 64-byte hostname together with the maximum 252-byte dhcpclass=
identifier needs 18 + (2 + 64) + (2 + 252) = 338 of the 312 available
bytes even before the terminating END marker, so the vendor-class memcpy
runs past the end of exten[]. With CONFIG_FORTIFY_SOURCE this is
reported as a field-spanning write and, when the kernel is booted with
panic_on_warn=1, aborts boot with a panic.
Route the optional options through a common helper that makes sure the
option, its 2-byte header and the END marker all fit and drops an option
that would not. Configurations with short options keep sending exactly
the same bytes as before. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: conntrack: fix helper UAF due to extensions realloc
While calling the helpers, a raw pointer to the extensions area is
wired into expectations list:
-> nf_ct_helper()
-> helper->help()
-> nf_ct_expect_related_report()
-> nf_ct_expect_insert()
-> hlist_add_head_rcu(&exp->lnode, &master_help->expectations)
In case the connection is not confirmed yet, more extensions can be
added afterwards with *_ext_add() calls reallocating the extension
space and leaving the now invalid pointer in the expectations list
that is later accessed while removing the expectation.
Make sure that helpers are called at the end after all the other
extensions are already added.
Note that the helper rejection now leaves the mark and labels set,
but that's not different from how the NAT was handled before or how
the mark and the labels were handled on confirmation failure. And
there are no atomicity guarantees provided by the API anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ena: fix MMIO read buffer leak on probe failure
ena_device_init() initializes the MMIO read mechanism with
ena_com_mmio_reg_read_request_init(), which allocates a coherent DMA
buffer for MMIO read responses.
The normal removal path releases this buffer through
ena_com_mmio_reg_read_request_destroy(). However, if ena_probe() fails
after ena_device_init() succeeds, the error path destroys the admin
resources and eventually frees ena_dev without destroying the MMIO read
request, leaving the coherent DMA buffer allocated.
Call ena_com_mmio_reg_read_request_destroy() in the probe error path
before releasing the remaining device resources.
This issue was found by manual code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: skip expired catchall elements on insert and delete
nft_setelem_catchall_insert() looks up duplicates with
nft_set_elem_active() only, while nft_set_catchall_lookup() and the
dump path additionally skip expired elements.
Once a catchall element with a timeout expires, this predicate drift
makes it invisible to userspace dumps, yet it still blocks
re-insertion: with NLM_F_EXCL the request fails with -EEXIST, and
without it the request reports success but silently inserts nothing.
The stale entry only goes away when the (user-tunable) gc interval
elapses, so the catchall rule may silently stop matching for an
arbitrarily long time after its first expiration.
The delete path shows the same drift: nft_setelem_catchall_deactivate()
picks the first active-next entry in the catchall list, so with an
expired entry still pending GC it retires the stale entry instead of
the fresh one, and it deactivates an element that userspace no longer
sees instead of failing with -ENOENT.
Align both walks with the lookup and dump predicates: only an element
that is active and not expired counts as a duplicate or delete
candidate, using the per-netns timestamp taken at transaction start,
in line with the set backend .insert/.deactivate and catchall GC sync
paths. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: mgmt: fix race in read_unconf_index_list()
read_unconf_index_list() counts unconfigured controllers before allocating
its response, then checks the device flags again while filling it.
hci_dev_list_lock stabilizes list membership, but it does not serialize the
per-device flags. During asynchronous controller setup, the worker can set
HCI_UNCONFIGURED and clear HCI_SETUP between the two passes. A controller
omitted from the allocation count can then become eligible for the fill
pass, causing an out-of-bounds write to rp->index[].
Allocate space for every device on hci_dev_list. Since list membership
cannot change while hci_dev_list_lock is held, the response remains large
enough regardless of flag transitions. The reported count and response
length still include only eligible unconfigured controllers. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix create context out-of-bounds reads
smb2_parse_contexts() validates the complete create-context area but
does not limit each record to its Next field before dispatching it. A
malformed chain can therefore expose bytes beyond the current context to
a handler. The QFid handler also used a full response-structure cast
although it only reads DiskFileId.
The SMB2/SMB3 lease parsers made the same layout assumption: they read
LeaseState and LeaseFlags at canonical offsets rather than at
DataOffset. A valid non-canonical DataOffset could therefore yield
unrelated in-bounds data, while a short DataLength was still accepted.
Limit each context to its Next value, reject offsets before the context
header, and reject malformed chains. Bound the name range by the current
context and do not dispatch a known handler when DataLength is zero. Read
the QFid DiskFileId only when the context data covers that field. Parse the
lease context from DataOffset and require DataLength to match the v1 or v2
lease_context size used by ksmbd. A size mismatch skips lease parsing
without failing the open. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: close handle after create-context parsing failure
SMB2_open() accounts a successful CREATE response as a remote open before
parsing its create contexts. If smb2_parse_contexts() rejects malformed
context data, SMB2_open() returns without closing the handle, leaving the
server-side handle open and num_remote_opens elevated.
Close the handle after a post-CREATE context parsing failure so the error
path releases the remote resource and balances the open count. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: use finish_no_open() for non-regular inodes
An O_CREAT open can find an existing symlink or another non-regular
inode. cifs_atomic_open() calls finish_open() on it and attaches a
cifsFileInfo. Symlink inodes have no CIFS release operation, so the
dentry reference held by cifsFileInfo is leaked. FMODE_OPENED also
prevents the VFS from following the symlink.
Track whether cifs_do_create() returned an open server handle. For
non-regular inodes, close the handle if present, remove the pending
open, and call finish_no_open() so the VFS can continue the lookup.
Do not set FMODE_CREATED unless a regular file was opened. For
O_NOFOLLOW with __O_REGULAR, return -ELOOP before the VFS's
-EFTYPE check.
Defer closing a legacy POSIX handle on a non-regular inode until
after inode lookup. This avoids closing it again if lookup fails. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: close completed creates on compound wait errors
compound_send_recv() waits for responses in order. If a later wait is
interrupted, or if a later MID fails during response synchronization, an
earlier CREATE may already have opened a remote handle. The earlier mid
is then released without invoking handle_cancelled_mid(), leaving the
remote handle open because no FID was copied to the caller.
Mark completed earlier mids as cancelled when a compound wait or MID
synchronization aborts. Keep their response buffers attached while the
MIDs are synchronized, and transfer them only after synchronization of
the processed responses, so the release path can inspect successful
CREATE responses and queue SMB2_close() after a later failure. Account for
a remote open only after the close work is allocated and before it is
queued, since the caller has not yet updated num_remote_opens. Mark the
create+close compound used by smb2_unlink() so it is not closed again.
Non-CREATE responses and compounds that already include a close keep their
existing behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix cursor and pointer handling when recovering iunlink buckets
LOLLM pointed out a bug in xlog_recover_iunlink_bucket:
1. We don't null out prev_ip after releasing it, which can lead to UAF
problems if the inodegc flush call in the loop fails.
at which point I noticed even more bugs:
2. If the inodegc flush inside the loop fails, we also leak @ip.
3. We set prev_agino to agino having already advanced agino, which
results in inodes with i_prev_unlinked set to itself.
4. If we exit the bottom of the loop with prev_ip set, then prev_ip
aliases ip and we also set its i_prev_unlinked to itself.
Bugs 3 and 4 introduce loops into the unlinked list, though these loops
don't surface because we immediately flush each unlinked inode after
loading it.
Fix all of these issues. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: rtd119x: Avoid division by zero
clk_get_rate() could return 0. Avoid a division by zero panic. |
