| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Enable exception fixup for specific ADE subcode
This patch allows the LoongArch BPF JIT to handle recoverable memory
access errors generated by BPF_PROBE_MEM* instructions.
When a BPF program performs memory access operations, the instructions
it executes may trigger ADEM exceptions. The kernel’s built-in BPF
exception table mechanism (EX_TYPE_BPF) will generate corresponding
exception fixup entries in the JIT compilation phase; however, the
architecture-specific trap handling function needs to proactively call
the common fixup routine to achieve exception recovery.
do_ade(): fix EX_TYPE_BPF memory access exceptions for BPF programs,
ensure safe execution.
Relevant test cases: illegal address access tests in module_attach and
subprogs_extable of selftests/bpf. |
| In the Linux kernel, the following vulnerability has been resolved:
net: gro: fix outer network offset
The udp GRO complete stage assumes that all the packets inserted the RX
have the `encapsulation` flag zeroed. Such assumption is not true, as a
few H/W NICs can set such flag when H/W offloading the checksum for
an UDP encapsulated traffic, the tun driver can inject GSO packets with
UDP encapsulation and the problematic layout can also be created via
a veth based setup.
Due to the above, in the problematic scenarios, udp4_gro_complete() uses
the wrong network offset (inner instead of outer) to compute the outer
UDP header pseudo checksum, leading to csum validation errors later on
in packet processing.
Address the issue always clearing the encapsulation flag at GRO completion
time. Such flag will be set again as needed for encapsulated packets by
udp_gro_complete(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: liquidio: Fix off-by-one error in PF setup_nic_devices() cleanup
In setup_nic_devices(), the initialization loop jumps to the label
setup_nic_dev_free on failure. The current cleanup loop while(i--)
skip the failing index i, causing a memory leak.
Fix this by changing the loop to iterate from the current index i
down to 0.
Also, decrement i in the devlink_alloc failure path to point to the
last successfully allocated index.
Compile tested only. Issue found using code review. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: rivafb: fix divide error in nv3_arb()
A userspace program can trigger the RIVA NV3 arbitration code by calling
the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver
recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz
(derived from the PRAMDAC MCLK PLL) as a divisor without validating it
first.
In a normal setup, state->mclk_khz is provided by the real hardware and is
non-zero. However, an attacker can construct a malicious or misconfigured
device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL
configuration, causing state->mclk_khz to become zero. Once
nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns
calculation causes a divide error and crashes the kernel.
Fix this by checking whether state->mclk_khz is zero and bailing out before
doing the division.
The following log reveals it:
rivafb: setting virtual Y resolution to 2184
divide error: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline]
RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546
Call Trace:
nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603
nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline]
CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246
riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779
rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196
fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033
do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109
fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188
__x64_sys_ioctl+0x122/0x190 fs/ioctl.c:856 |
| In N2W before 4.3.2 and 4.4.0 before 4.4.1, improper validation of API request parameters enables remote code execution. |
| In N2W before 4.3.2 and 4.4.x before 4.4.1, there is potential remote code execution and account credentials theft because of a spoofing vulnerability. |
| A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Tahoe 26.4. An app may bypass Gatekeeper checks. |
| This issue was addressed with improved handling of symlinks. This issue is fixed in iOS 26.3 and iPadOS 26.3, macOS Sequoia 15.7.4, macOS Sequoia 15.7.5, macOS Sonoma 14.8.4, macOS Sonoma 14.8.5, macOS Tahoe 26.3, macOS Tahoe 26.4. An app may be able to access user-sensitive data. |
| A permissions issue was addressed with additional restrictions. This issue is fixed in iOS 26.4 and iPadOS 26.4, tvOS 26.4, visionOS 26.4, watchOS 26.4. An app may be able to fingerprint the user. |
| The LeadConnector WordPress plugin before 3.0.22 does not have authorization in a REST route, allowing unauthenticated users to call it and overwrite existing data |
| etcd is a distributed key-value store for the data of a distributed system. Prior to versions 3.4.42, 3.5.28, and 3.6.9, an authenticated user with RBAC restricted permissions on key ranges can use nested transactions to bypass all key-level authorization. This allows any authenticated user with direct access to etcd to effectively ignore all key range restrictions, accessing the entire etcd data store. Kubernetes does not rely on etcd’s built-in authentication and authorization. Instead, the API server handles authentication and authorization itself, so typical Kubernetes deployments are not affected. Versions 3.4.42, 3.5.28, and 3.6.9 contain a patch. If upgrading is not immediately possible, reduce exposure by treating the affected RPCs as unauthenticated in practice. Restrict network access to etcd server ports so only trusted components can connect and require strong client identity at the transport layer, such as mTLS with tightly scoped client certificate distribution. |
| dynaconf is a configuration management tool for Python. Prior to version 3.2.13, Dynaconf is vulnerable to Server-Side Template Injection (SSTI) due to unsafe template evaluation in the @Jinja resolver. When the jinja2 package is installed, Dynaconf evaluates template expressions embedded in configuration values without a sandboxed environment. This issue has been patched in version 3.2.13. |
| DO NOT USE THIS CVE RECORD. ConsultIDs: none. Reason: This record was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: none. |
| A vulnerability in the web-based Cisco IOx application hosting environment management interface of Cisco IOS XE Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid administrative credentials. |
| A vulnerability in the web-based Cisco IOx application hosting environment management interface of Cisco IOS XE Software could allow an unauthenticated, remote attacker to perform a carriage return line feed (CRLF) injection attack against a user.
This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by sending crafted packets to an affected device. A successful exploit could allow the attacker to arbitrarily inject log entries, manipulate the structure of log files, or obscure legitimate log events. |
| A vulnerability in the Secure Copy Protocol (SCP) server feature of Cisco IOS XE Software could allow an authenticated, local attacker with low privileges to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper handling of a malformed SCP request. An attacker could exploit this vulnerability by issuing a crafted command through SSH. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition. |
| A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability exists because incorrect privileges are associated with the start maintenance command. An attacker could exploit this vulnerability by accessing the management CLI of the affected device as a low-privileged user and using the start maintenance command. A successful exploit could allow the attacker to put the device in maintenance mode, which shuts down interfaces, resulting in a denial of service (DoS) condition. In case of exploitation, a device administrator can connect to the CLI and use the stop maintenance command to restore operations. |
| A vulnerability in the web-based management interface of Cisco Catalyst SD-WAN Manager could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface of an affected device.
This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by persuading a user of the web-based management interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. |
| Mattermost versions 11.4.x <= 11.4.0, 11.3.x <= 11.3.1, 11.2.x <= 11.2.3, 10.11.x <= 10.11.11 fail to rate limit login requests which allows unauthenticated remote attackers to cause denial of service (server crash and restart) via HTTP/2 single packet attack with 100+ parallel login requests.. Mattermost Advisory ID: MMSA-2025-00566 |
| GitLab has remediated an issue in GitLab EE affecting all versions from 18.5 before 18.8.7, 18.9 before 18.9.3, and 18.10 before 18.10.1 that could have allowed an unauthenticated user to access API tokens of self-hosted AI models due to improper access control. |
